worker-m49
370c290160
真机 0.8.49 现场 /usr/bin/meow_netmgrd 是 P1(eb07415) 之前的旧件：`bt status` 无
connected= 字段、`bt connected|devices|a2dp` 连子命令都不存在（被当成写级拒绝）、
`bt paired` 落到 `bluetoothctl paired` → "Invalid command in menu main"。上游只有
NETMGR_UNREACH 才回退直连，INVAL/PERM 直接返回 → 三个列表恒空。
本单修掉「部署新件后依然存在」的三个真 bug + 一个解析缺陷：
1. `bluetoothctl paired` → `paired-devices`（bt_status 计数、bt paired 子命令两处）；
`devices` 只用于补名，不再当配对权威。
2. A2DP：v4.1.1 没有 `a2dp list`。改为 `list-pcms` 取端点 → 每端点 `info <path>`；
MAC 只从 D-Bus 路径的 `dev_XX_..` 段解（真机路径带 `/a2dpsrc/source` 段，
按「最后一段取 token」会拿到 "source"）。info 查不到就跳过，不编造。
3. `run_cmd` 四态（成功有输出/成功无输出/非 0 退出/超时/起不来）+ stderr 有界抓取
(≤256B)：旧实现只回字节数、失败也返回 0 → on/off/connect/disconnect/pair 恒报成功。
写操作改为下发后复查真态（hcitool con / bluetoothctl info Paired: / hciconfig
power），超时或未收敛如实报 MEOW_ERR_NODEV。兼容外壳 run_cmd() 契约不变。
4. 扫描缓存：实时 `[NEW] Device` 行以 ANSI ESC 开头（真机 od -c 证据），旧解析器只认
行首 → 实时行全丢。新增 bt_clean_ansi()/bt_scan_line_parse()：剥 ESC/CSI/控制符、
去 `[bluetooth]# ` 提示符、只认 [NEW] 与裸 Device、排除 [CHG]/[DEL]；bt_scan_on 改用
g_bluetoothctl（原来硬编码，桩对 scan 无效）。
解析器全部抽成纯函数并用真机原始字节做单测（test_bt_ctl.c 扩充：四态、ANSI 样本、
截断/空输出、list-pcms/info、hcitool con）。test_netmgrd.sh 桩改 list-pcms/info +
真机 ANSI 缓存样本；顺带修掉两处宿主可移植性问题（/tmp 不可写→$TMPDIR、桩脚本在
PATH=/bin:/usr/bin 下用了 cat/rm→改 shell 内建，test_wifi_connect 的 g_wpa_cli 悬垂
栈指针）。
按塔要求：本 commit 不含二进制、不改 fw_content.conf（netmgrd 产物由 M51 统一重编）。
build_netmgrd.sh 只做 ROOT/ZIGCC/OUT 环境变量化（旧硬编码 $HOME/Project/R3ProII），
M51 复用；time32 接入仍归 M43。
536 lines
27 KiB
C
536 lines
27 KiB
C
/* test_bt_ctl.c — meow_netmgrd 蓝牙控制面 纯逻辑宿主自测（本程序非生产代码）。
|
||
*
|
||
* 通过 #include 生产源文件（meow_netmgrd.c，用 #define main 改名避免入口冲突），同一 TU 直接访问
|
||
* FILE-STATIC 函数/全局：三个纯解析器（bt_scan_line_parse / bt_pcm_paths_parse+bt_pcm_info_parse /
|
||
* bt_acl_parse）、run_cmd_ex 四态、bt_cmd_is_write / bt_write_authorize、bt_ctl_execute
|
||
* （status/paired/connected/a2dp/devices/on/off/connect/disconnect/pair/unpair/scan）。
|
||
* 后端工具经有状态桩脚本（g_bluetoothctl/g_hcitool/g_bluealsa_cli/g_hciconfig/g_bt_scan_cache）
|
||
* 覆盖，不依赖真实蓝牙栈。
|
||
*
|
||
* 字节样本来源：2026-11-11 真机 `od -c /tmp/meow_bt_scan.txt`（0.8.49，BluetoothCtl 5.54 交互输出）。
|
||
*
|
||
* 用法：cc -Wall -Wextra -I../meow_launcherd test_bt_ctl.c -o test_bt_ctl && ./test_bt_ctl
|
||
*/
|
||
#define main meow_netmgrd_prod_main_unused
|
||
#include "meow_netmgrd.c"
|
||
#undef main
|
||
|
||
#include <stdio.h>
|
||
#include <string.h>
|
||
#include <stdlib.h>
|
||
#include <sys/stat.h>
|
||
#include <unistd.h>
|
||
|
||
static int g_fail = 0;
|
||
#define CHECK(cond) do { if (!(cond)) { printf(" FAIL: %s (line %d)\n", #cond, __LINE__); g_fail++; } \
|
||
else { printf(" ok : %s\n", #cond); } } while (0)
|
||
|
||
static void wf(const char *p, const char *s)
|
||
{
|
||
FILE *f = fopen(p, "w");
|
||
if (f) { fputs(s, f); fclose(f); }
|
||
}
|
||
|
||
/* ---- 真机原始字节样本（含 ANSI ESC / \001\002 标记 / \r\033[K / 提示符） ---- */
|
||
static const char *S_NEW_PUDDING =
|
||
"\033[0;94m[bluetooth]\033[0m# \r\033[K"
|
||
"[\001\033[0;92m\002NEW\001\033[0m\002] Device 79:85:D6:7B:73:63 79-85-D6-7B-73-63\n";
|
||
static const char *S_CHG_POWERED =
|
||
"\033[0;94m[bluetooth]\033[0m# \r\033[K"
|
||
"[\001\033[0;93m\002CHG\001\033[0m\002] Controller 4C:BC:98:B0:98:DB Powered: no\n";
|
||
static const char *S_DEL_LINE = "[DEL] Device 00:11:22:33:44:55\n";
|
||
static const char *S_PROMPT_DEVICES = "\033[0;94m[bluetooth]\033[0m# devices\n";
|
||
static const char *S_PLAIN_BLOCK = "Device 33:DE:2E:21:AD:30 MOONDROP Pudding\n";
|
||
static const char *S_TRUNC_MAC =
|
||
"\033[0;94m[bluetooth]\033[0m# \r\033[K[NEW] Device 33:DE:2E:21:A";
|
||
|
||
int main(void)
|
||
{
|
||
/* 宿主临时目录：Termux/Android 上 /tmp 不可写，优先 $TMPDIR（mktemp 同规则） */
|
||
const char *base = getenv("TMPDIR");
|
||
if (!base || !base[0]) base = "/tmp";
|
||
static char Tbuf[256];
|
||
snprintf(Tbuf, sizeof Tbuf, "%s/nmg_bt", base);
|
||
const char *T = Tbuf;
|
||
char p[256];
|
||
char cmd[512];
|
||
mkdir(Tbuf, 0755);
|
||
/* 假 /sys/class/bluetooth/hci0（available/powered/address） */
|
||
{ snprintf(p, sizeof p, "%s/bt", T); mkdir(p, 0755);
|
||
snprintf(p, sizeof p, "%s/bt/hci0", T); mkdir(p, 0755);
|
||
snprintf(p, sizeof p, "%s/bt/hci0/address", T); wf(p, "4c:bc:98:b0:98:db\n");
|
||
snprintf(p, sizeof p, "%s/bt/hci0/power", T); wf(p, "off\n"); }
|
||
/* 假 rfkill（bt on/off 会写 soft） */
|
||
{ snprintf(p, sizeof p, "%s/rfkill", T); mkdir(p, 0755);
|
||
snprintf(p, sizeof p, "%s/rfkill/rfkill1", T); mkdir(p, 0755);
|
||
snprintf(p, sizeof p, "%s/rfkill/rfkill1/type", T); wf(p, "bluetooth\n");
|
||
snprintf(p, sizeof p, "%s/rfkill/rfkill1/soft", T); wf(p, "1\n"); }
|
||
/* 有状态桩的状态目录 */
|
||
snprintf(p, sizeof p, "%s/state", T); mkdir(p, 0755);
|
||
|
||
/* 桩：bluetoothctl（paired-devices/devices/info/connect/disconnect/pair/remove，靠状态文件变迁）
|
||
* 注意：生产代码给后端命令前置 PATH=/bin:/sbin:/usr/bin:/usr/sbin，Termux 上 cat/basename/grep
|
||
* 都不在这几个目录里 —— 桩脚本只能用 shell 内建（read/echo/[ /参数展开），否则测试会假失败。 */
|
||
snprintf(p, sizeof p, "%s/bluetoothctl", T);
|
||
{
|
||
char sh[3200];
|
||
snprintf(sh, sizeof sh,
|
||
"#!/bin/sh\n"
|
||
"S='%s/state'\n"
|
||
"catf() { [ -f \"$1\" ] || return 0; while IFS= read -r l || [ -n \"$l\" ]; do echo \"$l\"; done < \"$1\"; }\n"
|
||
"case \"$1\" in\n"
|
||
" paired-devices) catf \"$S/paired_list.txt\"; exit 0;;\n"
|
||
" devices) catf \"$S/dev_list.txt\"; exit 0;;\n"
|
||
" info)\n"
|
||
" mac=\"$2\"\n"
|
||
" if [ ! -f \"$S/paired_$mac\" ]; then echo \"Device $mac not available\"; exit 1; fi\n"
|
||
" pv=no; IFS= read -r pv < \"$S/paired_$mac\"\n"
|
||
" if [ \"$pv\" = gone ]; then echo \"Device $mac not available\"; exit 1; fi\n"
|
||
" cv=no\n"
|
||
" if [ -f \"$S/conn_$mac\" ]; then IFS= read -r cv < \"$S/conn_$mac\"; fi\n"
|
||
" echo \"Device $mac\"\n"
|
||
" echo \" Name: Pudding\"\n"
|
||
" echo \" Paired: $pv\"\n"
|
||
" echo \" Connected: $cv\"\n"
|
||
" exit 0;;\n"
|
||
" connect)\n"
|
||
" case \"$2\" in AA:*) echo 'Failed to connect: org.bluez.Error.Failed br-connection-refused'; exit 1;; esac\n"
|
||
" echo yes > \"$S/conn_$2\"; echo yes > \"$S/paired_$2\"\n"
|
||
" echo 'Attempting to connect'; echo 'Connection successful'; exit 0;;\n"
|
||
" disconnect)\n"
|
||
" case \"$2\" in AA:*) echo 'Failed to disconnect: not connected'; exit 1;; esac\n"
|
||
" case \"$2\" in BB:*) echo 'Successful disconnected'; exit 0;; esac\n"
|
||
" echo no > \"$S/conn_$2\"; echo 'Successful disconnected'; exit 0;;\n"
|
||
" pair)\n"
|
||
" case \"$2\" in AA:*) echo 'Failed to pair: org.bluez.Error.AuthenticationFailed'; exit 1;; esac\n"
|
||
" echo yes > \"$S/paired_$2\"; echo 'Pairing successful'; exit 0;;\n"
|
||
" remove)\n"
|
||
" echo gone > \"$S/paired_$2\"; echo no > \"$S/conn_$2\"; echo 'Device has been removed'; exit 0;;\n"
|
||
"esac\n"
|
||
"exit 0\n", T);
|
||
wf(p, sh); chmod(p, 0755);
|
||
}
|
||
/* 桩：hcitool con —— 按 conn_<mac>=yes 标记生成 ACL 行 */
|
||
snprintf(p, sizeof p, "%s/hcitool", T);
|
||
{
|
||
char sh[900];
|
||
snprintf(sh, sizeof sh,
|
||
"#!/bin/sh\n"
|
||
"S='%s/state'\n"
|
||
"echo 'Connections:'\n"
|
||
"for f in \"$S\"/conn_*; do\n"
|
||
" [ -f \"$f\" ] || continue\n"
|
||
" v=no; IFS= read -r v < \"$f\"\n"
|
||
" [ \"$v\" = yes ] || continue\n"
|
||
" m=\"${f##*/}\"; m=\"${m#conn_}\"\n"
|
||
" echo \"\t< ACL $m handle 12 state 1 lm MASTER\"\n"
|
||
"done\n"
|
||
"exit 0\n", T);
|
||
wf(p, sh); chmod(p, 0755);
|
||
}
|
||
/* 桩：hciconfig —— `hci0 up/down` 改 sysfs power，`hci0` 打印状态 */
|
||
snprintf(p, sizeof p, "%s/hciconfig", T);
|
||
{
|
||
char sh[900];
|
||
snprintf(sh, sizeof sh,
|
||
"#!/bin/sh\n"
|
||
"S='%s'\n"
|
||
"case \"$2\" in\n"
|
||
" up) echo on > \"$S/bt/hci0/power\"; echo 'hci0: Type: Primary Bus: UART'; echo ' UP RUNNING';;\n"
|
||
" down) echo off > \"$S/bt/hci0/power\"; echo 'hci0: Type: Primary Bus: UART'; echo ' DOWN';;\n"
|
||
" *) echo 'hci0: Type: Primary Bus: UART'\n"
|
||
" v=off; if [ -f \"$S/bt/hci0/power\" ]; then IFS= read -r v < \"$S/bt/hci0/power\"; fi\n"
|
||
" if [ \"$v\" = on ]; then echo ' UP RUNNING'; else echo ' DOWN'; fi;;\n"
|
||
"esac\n"
|
||
"exit 0\n", T);
|
||
wf(p, sh); chmod(p, 0755);
|
||
}
|
||
/* 桩：bluealsa-cli —— list-pcms 端点由 $S/pcms.txt 控制，info 按路径返回属性 */
|
||
snprintf(p, sizeof p, "%s/bluealsa-cli", T);
|
||
{
|
||
char sh[3200];
|
||
snprintf(sh, sizeof sh,
|
||
"#!/bin/sh\n"
|
||
"S='%s/state'\n"
|
||
"catf() { [ -f \"$1\" ] || return 0; while IFS= read -r l || [ -n \"$l\" ]; do echo \"$l\"; done < \"$1\"; }\n"
|
||
"case \"$1\" in\n"
|
||
" list-pcms) catf \"$S/pcms.txt\"; exit 0;;\n"
|
||
" info)\n"
|
||
" path=\"$2\"; found=0\n"
|
||
" if [ -f \"$S/pcms.txt\" ]; then\n"
|
||
" while IFS= read -r l || [ -n \"$l\" ]; do\n"
|
||
" if [ \"$l\" = \"$path\" ]; then found=1; fi\n"
|
||
" done < \"$S/pcms.txt\"\n"
|
||
" fi\n"
|
||
" case \"$path\" in *33_DE_2E_21_AD_30*) ;; *) found=0;; esac\n"
|
||
" if [ \"$found\" != 1 ]; then\n"
|
||
" echo \"bluealsa-cli: E: CMD \\\"info\\\": Couldn't get BlueALSA PCM: Object path not found: '$path'\" >&2\n"
|
||
" exit 1\n"
|
||
" fi\n"
|
||
" echo \"BlueALSA PCM: $path\"\n"
|
||
" echo ' Transport: A2DP-source'\n"
|
||
" echo ' Codec: SBC'\n"
|
||
" echo ' CodecConfiguration: 0x3f'\n"
|
||
" echo ' Sampling: 44100 Hz'\n"
|
||
" echo ' Channels: 2'\n"
|
||
" echo ' Bits per Sample: 16'\n"
|
||
" echo ' Running: true'\n"
|
||
" echo ' State: RUNNING'\n"
|
||
" exit 0;;\n"
|
||
"esac\n"
|
||
"exit 0\n", T);
|
||
wf(p, sh); chmod(p, 0755);
|
||
}
|
||
/* 初始状态：两台已配对（真机 MOONDROP / 17OP15），无 ACL */
|
||
snprintf(p, sizeof p, "%s/state/paired_list.txt", T);
|
||
wf(p, "Device 33:DE:2E:21:AD:30 MOONDROP Pudding\nDevice E0:42:6D:79:C5:98 17OP15\n");
|
||
snprintf(p, sizeof p, "%s/state/dev_list.txt", T);
|
||
wf(p, "Device 33:DE:2E:21:AD:30 MOONDROP Pudding\nDevice E0:42:6D:79:C5:98 17OP15\n"
|
||
"Device 79:85:D6:7B:73:63 79-85-D6-7B-73-63\n");
|
||
snprintf(p, sizeof p, "%s/state/paired_33:DE:2E:21:AD:30", T); wf(p, "yes\n");
|
||
snprintf(p, sizeof p, "%s/state/paired_E0:42:6D:79:C5:98", T); wf(p, "yes\n");
|
||
|
||
/* 指向桩（g_* 是 const char*，用静态缓冲承载） */
|
||
static char sb_bt[256], sb_hci[256], sb_ba[256], sb_hc[256], sb_cache[256];
|
||
snprintf(sb_bt, sizeof sb_bt, "%s/bluetoothctl", T);
|
||
snprintf(sb_hci, sizeof sb_hci, "%s/hcitool", T);
|
||
snprintf(sb_ba, sizeof sb_ba, "%s/bluealsa-cli", T);
|
||
snprintf(sb_hc, sizeof sb_hc, "%s/hciconfig", T);
|
||
snprintf(sb_cache, sizeof sb_cache, "%s/bt_scan.txt", T);
|
||
g_bluetoothctl = sb_bt;
|
||
g_hcitool = sb_hci;
|
||
g_bluealsa_cli = sb_ba;
|
||
g_hciconfig = sb_hc;
|
||
g_bt_scan_cache = sb_cache;
|
||
g_bt_dir[0] = 0; snprintf(g_bt_dir, sizeof g_bt_dir, "%s/bt", T);
|
||
g_rfkill_dir[0] = 0; snprintf(g_rfkill_dir, sizeof g_rfkill_dir, "%s/rfkill", T);
|
||
|
||
ctl_result_t r;
|
||
|
||
/* ================= 1. run_cmd_ex 四态（M49 新增） ================= */
|
||
printf("== run_cmd_ex 四态：成功有输出/成功无输出/非 0 退出/超时/命令不存在/stderr 抓取 ==\n");
|
||
{
|
||
runcmd_res_t rr;
|
||
char b[128];
|
||
int n = run_cmd_ex(b, sizeof b, 1500, "echo hi", &rr);
|
||
CHECK(n == 3);
|
||
CHECK(rr.status == RUNCMD_OK);
|
||
CHECK(rr.exit_code == 0);
|
||
n = run_cmd_ex(b, sizeof b, 1500, "true", &rr);
|
||
CHECK(n == 0);
|
||
CHECK(rr.status == RUNCMD_EMPTY); /* 成功但无输出 ≠ 失败 */
|
||
n = run_cmd_ex(b, sizeof b, 1500, "exit 3", &rr);
|
||
CHECK(n == 0);
|
||
CHECK(rr.status == RUNCMD_EXIT);
|
||
CHECK(rr.exit_code == 3);
|
||
n = run_cmd_ex(b, sizeof b, 1500, "nosuchcmd_m49_xyz", &rr);
|
||
CHECK(rr.status == RUNCMD_EXIT);
|
||
CHECK(rr.exit_code == 127); /* 命令不存在（sh 报 127） */
|
||
n = run_cmd_ex(b, sizeof b, 150, "sleep 5", &rr);
|
||
CHECK(rr.status == RUNCMD_TIMEOUT); /* 限时内不退出 */
|
||
CHECK(n >= 0);
|
||
n = run_cmd_ex(b, sizeof b, 1500, "echo boom >&2; exit 4", &rr);
|
||
CHECK(rr.status == RUNCMD_EXIT);
|
||
CHECK(rr.exit_code == 4);
|
||
CHECK(strstr(rr.err, "boom") != NULL); /* stderr 不再丢 /dev/null */
|
||
int isfail = 0;
|
||
const char *why = run_cmd_why(&rr, &isfail);
|
||
CHECK(isfail == 1);
|
||
CHECK(strstr(why, "exit 4") != NULL);
|
||
CHECK(strstr(why, "boom") != NULL);
|
||
CHECK(run_cmd(b, sizeof b, 1500, "echo ok") == 3); /* 旧外壳契约不变 */
|
||
}
|
||
|
||
/* ================= 2. 扫描缓存解析（真机字节） ================= */
|
||
printf("== bt_clean_ansi / bt_scan_line_parse（真机 od 字节样本） ==\n");
|
||
{
|
||
char clean[512], mac[24], name[64];
|
||
bt_clean_ansi(S_NEW_PUDDING, clean, sizeof clean);
|
||
CHECK(strstr(clean, "\033") == NULL);
|
||
CHECK(strstr(clean, "\001") == NULL && strstr(clean, "\002") == NULL);
|
||
CHECK(strstr(clean, "\r") == NULL);
|
||
CHECK(strcmp(clean, "[bluetooth]# [NEW] Device 79:85:D6:7B:73:63 79-85-D6-7B-73-63") == 0);
|
||
|
||
CHECK(bt_scan_line_parse(S_NEW_PUDDING, mac, sizeof mac, name, sizeof name) == 1);
|
||
CHECK(strcmp(mac, "79:85:D6:7B:73:63") == 0);
|
||
CHECK(strcmp(name, "79-85-D6-7B-73-63") == 0);
|
||
|
||
CHECK(bt_scan_line_parse(S_PLAIN_BLOCK, mac, sizeof mac, name, sizeof name) == 1);
|
||
CHECK(strcmp(mac, "33:DE:2E:21:AD:30") == 0);
|
||
CHECK(strcmp(name, "MOONDROP Pudding") == 0);
|
||
|
||
/* [CHG]/[DEL] 不是「附近有这台」 */
|
||
CHECK(bt_scan_line_parse(S_CHG_POWERED, mac, sizeof mac, name, sizeof name) == 0);
|
||
CHECK(bt_scan_line_parse(S_DEL_LINE, mac, sizeof mac, name, sizeof name) == 0);
|
||
/* 提示符回显行 / 空行 / 截断到半截 MAC / 无关行 */
|
||
CHECK(bt_scan_line_parse(S_PROMPT_DEVICES, mac, sizeof mac, name, sizeof name) == 0);
|
||
CHECK(bt_scan_line_parse("", mac, sizeof mac, name, sizeof name) == 0);
|
||
CHECK(bt_scan_line_parse(S_TRUNC_MAC, mac, sizeof mac, name, sizeof name) == 0);
|
||
CHECK(bt_scan_line_parse("Waiting to connect to bluetoothd...\r\n", mac, sizeof mac, name, sizeof name) == 0);
|
||
/* MAC 后无名字（截断输出）也要给出设备 */
|
||
CHECK(bt_scan_line_parse("[NEW] Device AA:BB:CC:DD:EE:FF\n", mac, sizeof mac, name, sizeof name) == 1);
|
||
CHECK(strcmp(mac, "AA:BB:CC:DD:EE:FF") == 0);
|
||
CHECK(name[0] == 0);
|
||
}
|
||
|
||
/* ================= 3. hcitool con 解析 ================= */
|
||
printf("== bt_acl_parse（hcitool con 原始输出/空/截断） ==\n");
|
||
{
|
||
char macs[8][24];
|
||
CHECK(bt_acl_parse("Connections:\n", macs, 8) == 0);
|
||
CHECK(bt_acl_parse("", macs, 8) == 0);
|
||
int n = bt_acl_parse("Connections:\n"
|
||
"\t< ACL 33:DE:2E:21:AD:30 handle 12 state 1 lm MASTER\n"
|
||
"\t< ACL 11:22:33:44:55:66 handle 13 state 1 lm SLAVE\n", macs, 8);
|
||
CHECK(n == 2);
|
||
CHECK(strcmp(macs[0], "33:DE:2E:21:AD:30") == 0);
|
||
CHECK(strcmp(macs[1], "11:22:33:44:55:66") == 0);
|
||
/* SCO 行不是 ACL；截断 MAC 丢掉 */
|
||
n = bt_acl_parse("\t< SCO 33:DE:2E:21:AD:30 handle 12 state 1\n"
|
||
"\t< ACL 33:DE:2E:21:A\n", macs, 8);
|
||
CHECK(n == 0);
|
||
}
|
||
|
||
/* ================= 4. list-pcms / info 解析 ================= */
|
||
printf("== bt_pcm_paths_parse / bt_path_mac / bt_pcm_info_parse ==\n");
|
||
{
|
||
char paths[4][80];
|
||
int n = bt_pcm_paths_parse("/org/bluealsa/hci0/dev_33_DE_2E_21_AD_30/a2dpsrc\n", paths, 4);
|
||
CHECK(n == 1);
|
||
CHECK(strcmp(paths[0], "/org/bluealsa/hci0/dev_33_DE_2E_21_AD_30/a2dpsrc") == 0);
|
||
n = bt_pcm_paths_parse("/org/bluealsa/hci0/dev_33_DE_2E_21_AD_30/a2dpsrc\n"
|
||
"/org/bluealsa/hci0/dev_E0_42_6D_79_C5_98/a2dpsnk\r\n"
|
||
"/org/bluealsa/hci0/dev_E0_42_6D_79_C5_98/sco\n", paths, 4);
|
||
CHECK(n == 2); /* SCO/HFP 端点不算 A2DP */
|
||
CHECK(strcmp(paths[1], "/org/bluealsa/hci0/dev_E0_42_6D_79_C5_98/a2dpsnk") == 0);
|
||
CHECK(bt_pcm_paths_parse("", paths, 4) == 0);
|
||
/* 真机 bluealsa v4.x 端点路径带末端段，且**结尾字面量不可依赖**：
|
||
* 塔 2026-11-11 首连实测是 `/a2dpsrc/sink`（不是 /source），M50 的旧 bt_dev_detect_mac()
|
||
* 按「最后一个 / 之后」取 token 就会拿到 "sink" 而不是 MAC。此处两种结尾都验。 */
|
||
n = bt_pcm_paths_parse("/org/bluealsa/hci0/dev_33_DE_2E_21_AD_30/a2dpsrc/sink\n"
|
||
"/org/bluealsa/hci0/dev_E0_42_6D_79_C5_98/a2dpsnk/source\n", paths, 4);
|
||
CHECK(n == 2);
|
||
CHECK(strcmp(paths[0], "/org/bluealsa/hci0/dev_33_DE_2E_21_AD_30/a2dpsrc/sink") == 0);
|
||
char mac2[24];
|
||
CHECK(bt_path_mac(paths[0], mac2, sizeof mac2) == 1);
|
||
CHECK(strcmp(mac2, "33:DE:2E:21:AD:30") == 0); /* 不是 "sink" */
|
||
CHECK(bt_path_mac(paths[1], mac2, sizeof mac2) == 1);
|
||
CHECK(strcmp(mac2, "E0:42:6D:79:C5:98") == 0);
|
||
char mac3[24]; /* 无末端段的老形态也兼容 */
|
||
CHECK(bt_path_mac("/org/bluealsa/hci0/dev_33_DE_2E_21_AD_30/a2dpsrc", mac3, sizeof mac3) == 1);
|
||
CHECK(strcmp(mac3, "33:DE:2E:21:AD:30") == 0);
|
||
/* 截断输出（半截路径）也不许崩、不许当成端点 */
|
||
bt_pcm_paths_parse("/org/bluealsa/hci0/dev_33_D", paths, 4);
|
||
char mac[24];
|
||
CHECK(bt_path_mac("/org/bluealsa/hci0/dev_33_DE_2E_21_AD_30/a2dpsrc", mac, sizeof mac) == 1);
|
||
CHECK(strcmp(mac, "33:DE:2E:21:AD:30") == 0);
|
||
CHECK(bt_path_mac("/org/bluealsa/hci0/dev_33_DE_2E_21_AD_3", mac, sizeof mac) == 0);
|
||
CHECK(bt_path_mac("/org/bluealsa/hci0/nothing", mac, sizeof mac) == 0);
|
||
|
||
bt_pcm_info_t info;
|
||
bt_pcm_info_parse("BlueALSA PCM: /org/bluealsa/hci0/dev_33_DE_2E_21_AD_30/a2dpsrc\n"
|
||
" Transport: A2DP-source\n"
|
||
" Codec: SBC\n"
|
||
" CodecConfiguration: 0x3f\n"
|
||
" Sampling: 44100 Hz\n"
|
||
" Channels: 2\n"
|
||
" Bits per Sample: 16\n"
|
||
" Running: true\n"
|
||
" State: RUNNING\n", &info);
|
||
CHECK(info.has == 1);
|
||
CHECK(strcmp(info.codec, "SBC") == 0); /* 不被 CodecConfiguration 抢走 */
|
||
CHECK(strcmp(info.rate, "44100 Hz") == 0);
|
||
CHECK(strcmp(info.channels, "2") == 0);
|
||
CHECK(strcmp(info.bits, "16") == 0);
|
||
CHECK(info.running == 1);
|
||
/* 只有 Format 一行（属性打包）时的兜底 */
|
||
bt_pcm_info_parse(" Format: 48000 Hz, 2 channels, 24 bits\n", &info);
|
||
CHECK(info.has == 1);
|
||
CHECK(strcmp(info.rate, "48000") == 0);
|
||
CHECK(strcmp(info.channels, "2") == 0);
|
||
CHECK(strcmp(info.bits, "24") == 0);
|
||
CHECK(info.running == -1);
|
||
/* 空输出 / 错误输出（endpoint 不存在）→ has=0，不许编造 */
|
||
bt_pcm_info_parse("", &info);
|
||
CHECK(info.has == 0);
|
||
bt_pcm_info_parse("bluealsa-cli: E: CMD \"info\": Couldn't get BlueALSA PCM: "
|
||
"Object path not found: '/org/bluealsa/hci0/dev_00/a2dpsrc'\n", &info);
|
||
CHECK(info.has == 0);
|
||
}
|
||
|
||
/* ================= 5. 读写分类与授权 ================= */
|
||
printf("== bt_cmd_is_write 分类（读/写级） ==\n");
|
||
CHECK(bt_cmd_is_write("status") == 0);
|
||
CHECK(bt_cmd_is_write("paired") == 0);
|
||
CHECK(bt_cmd_is_write("connected") == 0);
|
||
CHECK(bt_cmd_is_write("a2dp") == 0);
|
||
CHECK(bt_cmd_is_write("devices") == 0);
|
||
CHECK(bt_cmd_is_write("on") == 1);
|
||
CHECK(bt_cmd_is_write("off") == 1);
|
||
CHECK(bt_cmd_is_write("connect") == 1);
|
||
CHECK(bt_cmd_is_write("disconnect") == 1);
|
||
CHECK(bt_cmd_is_write("pair") == 1);
|
||
CHECK(bt_cmd_is_write("unpair") == 1);
|
||
CHECK(bt_cmd_is_write("scan") == 1);
|
||
|
||
/* ================= 6. 读级（status/paired/connected/a2dp/devices） ================= */
|
||
printf("== 读级：status/paired/connected/a2dp/devices ==\n");
|
||
bt_ctl_execute("status", NULL, &r);
|
||
CHECK(r.code == MEOW_OK);
|
||
CHECK(strstr(r.text, "paired=2") != NULL); /* paired-devices 计数 */
|
||
CHECK(strstr(r.text, "connected=0") != NULL); /* 内核 ACL 权威：当前无连接 */
|
||
|
||
bt_ctl_execute("paired", NULL, &r);
|
||
CHECK(r.code == MEOW_OK);
|
||
CHECK(strstr(r.text, "Device 33:DE:2E:21:AD:30 MOONDROP Pudding") != NULL);
|
||
CHECK(strstr(r.text, "Device E0:42:6D:79:C5:98 17OP15") != NULL);
|
||
|
||
/* 没有已配对设备 = 空列表（不是错误） */
|
||
snprintf(p, sizeof p, "%s/state/paired_list.txt", T); wf(p, "");
|
||
bt_ctl_execute("paired", NULL, &r);
|
||
CHECK(r.code == MEOW_OK);
|
||
CHECK(r.text[0] == 0);
|
||
snprintf(p, sizeof p, "%s/state/paired_list.txt", T);
|
||
wf(p, "Device 33:DE:2E:21:AD:30 MOONDROP Pudding\nDevice E0:42:6D:79:C5:98 17OP15\n");
|
||
|
||
/* a2dp：list-pcms → info，无端点时 "A2DP none" */
|
||
snprintf(p, sizeof p, "%s/state/pcms.txt", T);
|
||
wf(p, "/org/bluealsa/hci0/dev_33_DE_2E_21_AD_30/a2dpsrc\n");
|
||
bt_ctl_execute("a2dp", NULL, &r);
|
||
CHECK(r.code == MEOW_OK);
|
||
CHECK(strstr(r.text, "A2DP 33:DE:2E:21:AD:30") != NULL);
|
||
CHECK(strstr(r.text, "codec=SBC") != NULL);
|
||
CHECK(strstr(r.text, "rate=44100 Hz") != NULL);
|
||
CHECK(strstr(r.text, "channels=2") != NULL);
|
||
CHECK(strstr(r.text, "bits=16") != NULL);
|
||
CHECK(strstr(r.text, "acquired=1") != NULL);
|
||
CHECK(strstr(r.text, "role=src") != NULL);
|
||
/* 列表里有端点但 info 查不到（刚断开）→ 跳过，不编造 */
|
||
wf(p, "/org/bluealsa/hci0/dev_00_00_00_00_00_00/a2dpsrc\n");
|
||
bt_ctl_execute("a2dp", NULL, &r);
|
||
CHECK(strcmp(r.text, "A2DP none\n") == 0);
|
||
wf(p, "");
|
||
bt_ctl_execute("a2dp", NULL, &r);
|
||
CHECK(strcmp(r.text, "A2DP none\n") == 0);
|
||
|
||
printf("== 扫描缓存 → bt devices（真机 ANSI 字节 + devices 尾块 + 去重） ==\n");
|
||
{
|
||
char cache[4096];
|
||
/* 结构与真机 /tmp/meow_bt_scan.txt 一致：开头等待行 + ESC[P + 提示符，实时 NEW 行，
|
||
* 末尾 devices 块，最后一行被截断（没有换行）。 */
|
||
snprintf(cache, sizeof cache,
|
||
"Waiting to connect to bluetoothd...\r\033[P\033[P\033[P"
|
||
"\033[0;94m[bluetooth]\033[0m# \033[K\r\033[KAgent registered\n"
|
||
"\033[0;94m[bluetooth]\033[0m# scan on\n"
|
||
"%s"
|
||
"%s"
|
||
"\033[0;94m[bluetooth]\033[0m# scan off\n"
|
||
"\033[0;94m[bluetooth]\033[0m# devices\n"
|
||
"Device 33:DE:2E:21:AD:30 MOONDROP Pudding\n"
|
||
"Device E0:42:6D:79:C5:98 17OP15\n"
|
||
"Device 79:85:D6:7B:73:63 79-85-D6-7B-73-63\n"
|
||
"\033[0;94m[bluetooth]\033[0m# quit\n"
|
||
"\033[0;94m[bluetooth]\033[0m# \r\033[K"
|
||
"[\001\033[0;92m\002NEW\001\033[0m\002] Device AA:BB:CC:DD:EE:FF Earbuds",
|
||
S_NEW_PUDDING, S_CHG_POWERED);
|
||
snprintf(p, sizeof p, "%s/bt_scan.txt", T); wf(p, cache);
|
||
bt_ctl_execute("devices", NULL, &r);
|
||
CHECK(r.code == MEOW_OK);
|
||
/* 实时 NEW 行（ANSI 开头）现在能解析出来 */
|
||
CHECK(strstr(r.text, "Device 79:85:D6:7B:73:63 79-85-D6-7B-73-63") != NULL);
|
||
CHECK(strstr(r.text, "Device 33:DE:2E:21:AD:30 MOONDROP Pudding") != NULL);
|
||
CHECK(strstr(r.text, "Device E0:42:6D:79:C5:98 17OP15") != NULL);
|
||
/* 截断的最后一行（无换行）也要收；[CHG] 行不许混进来 */
|
||
CHECK(strstr(r.text, "Device AA:BB:CC:DD:EE:FF Earbuds") != NULL);
|
||
CHECK(strstr(r.text, "Controller 4C:BC:98") == NULL);
|
||
CHECK(strstr(r.text, "Powered") == NULL);
|
||
/* 去重：79:.. 实时行与 devices 块各一次，输出只一行 */
|
||
{ int cnt = 0; const char *q = r.text;
|
||
while ((q = strstr(q, "79:85:D6:7B:73:63")) != NULL) { cnt++; q += 17; }
|
||
CHECK(cnt == 1); }
|
||
/* 缓存不存在 → 空文本 */
|
||
unlink(p);
|
||
bt_ctl_execute("devices", NULL, &r);
|
||
CHECK(r.code == MEOW_OK);
|
||
CHECK(r.text[0] == 0);
|
||
}
|
||
|
||
/* ================= 7. 写级：on/off + connect/disconnect/pair/unpair ================= */
|
||
printf("== bt on/off：按 power 真态定稿 ==\n");
|
||
bt_ctl_execute("on", NULL, &r);
|
||
CHECK(r.code == MEOW_OK);
|
||
CHECK(strstr(r.text, "已复查") != NULL);
|
||
CHECK(bt_powered_now() == 1);
|
||
bt_ctl_execute("off", NULL, &r);
|
||
CHECK(r.code == MEOW_OK);
|
||
CHECK(bt_powered_now() == 0);
|
||
|
||
printf("== bt connect：成功路径以 hcitool con 复查 ==\n");
|
||
bt_ctl_execute("connect", "33:DE:2E:21:AD:30", &r);
|
||
CHECK(r.code == MEOW_OK);
|
||
CHECK(strstr(r.text, "已连接") != NULL);
|
||
CHECK(strstr(r.text, "hcitool con") != NULL);
|
||
CHECK(bt_acl_has("33:DE:2E:21:AD:30") == 1);
|
||
|
||
printf("== bt disconnect：成功路径以 hcitool con 复查 ==\n");
|
||
bt_ctl_execute("disconnect", "33:DE:2E:21:AD:30", &r);
|
||
CHECK(r.code == MEOW_OK);
|
||
CHECK(strstr(r.text, "已断开") != NULL);
|
||
CHECK(bt_acl_has("33:DE:2E:21:AD:30") == 0);
|
||
|
||
printf("== bt connect 失败：bluetoothctl 报错 + 无 ACL → ERR_NODEV（旧实现恒报成功） ==\n");
|
||
bt_ctl_execute("connect", "AA:AA:AA:AA:AA:AA", &r);
|
||
CHECK(r.code == MEOW_ERR_NODEV);
|
||
CHECK(strstr(r.text, "未生效") != NULL);
|
||
CHECK(strstr(r.text, "br-connection-refused") != NULL); /* 失败原因来自 stderr/stdout 片段 */
|
||
|
||
printf("== bt disconnect 假成功：命令 exit 0 但 ACL 仍在 → 仍报 ERR_NODEV ==\n");
|
||
/* BB:* 的 disconnect 桩打印成功但不删 ACL（模拟「命令说成功、链路其实还在」）。 */
|
||
snprintf(p, sizeof p, "%s/state/conn_BB:BB:BB:BB:BB:BB", T); wf(p, "yes\n");
|
||
snprintf(p, sizeof p, "%s/state/paired_BB:BB:BB:BB:BB:BB", T); wf(p, "yes\n");
|
||
bt_ctl_execute("disconnect", "BB:BB:BB:BB:BB:BB", &r);
|
||
CHECK(r.code == MEOW_ERR_NODEV);
|
||
CHECK(strstr(r.text, "仍有该 ACL") != NULL);
|
||
bt_ctl_execute("disconnect", "AA:AA:AA:AA:AA:AA", &r); /* 本来就没 ACL：真态=已断开 */
|
||
CHECK(r.code == MEOW_OK);
|
||
CHECK(strstr(r.text, "已断开") != NULL);
|
||
bt_ctl_execute("connect", "11:22:33:44:55:66", &r);
|
||
CHECK(r.code == MEOW_OK);
|
||
|
||
printf("== bt pair/unpair：以 bluetoothctl info Paired: 复查 ==\n");
|
||
bt_ctl_execute("pair", "11:22:33:44:55:66", &r);
|
||
CHECK(r.code == MEOW_OK);
|
||
CHECK(strstr(r.text, "已配对") != NULL);
|
||
CHECK(bt_info_flag("11:22:33:44:55:66", "Paired") == 1);
|
||
bt_ctl_execute("unpair", "11:22:33:44:55:66", &r); /* remove → info 查不到也算解除 */
|
||
CHECK(r.code == MEOW_OK);
|
||
CHECK(strstr(r.text, "已解除配对") != NULL);
|
||
CHECK(bt_info_flag("11:22:33:44:55:66", "Paired") == -1);
|
||
bt_ctl_execute("pair", "AA:AA:AA:AA:AA:AA", &r);
|
||
CHECK(r.code == MEOW_ERR_NODEV);
|
||
CHECK(strstr(r.text, "未生效") != NULL);
|
||
bt_ctl_execute("connect", "", &r);
|
||
CHECK(r.code == MEOW_ERR_INVAL); /* 缺 mac → INVAL */
|
||
|
||
printf("== bt scan on/off（写级；桩 bluetoothctl 现在被 scan 真正调用） ==\n");
|
||
bt_ctl_execute("scan", NULL, &r);
|
||
CHECK(r.code == MEOW_OK);
|
||
CHECK(strstr(r.text, "scan on") != NULL);
|
||
bt_ctl_execute("scan", "off", &r);
|
||
CHECK(r.code == MEOW_OK);
|
||
|
||
printf("== bt_write_authorize（系统身份 + MeowOS 才放行写级） ==\n");
|
||
caller_t other; memset(&other, 0, sizeof other); other.kind = CALL_OTHER;
|
||
caller_t sys; memset(&sys, 0, sizeof sys); sys.kind = CALL_SYS;
|
||
snprintf(sys.pkg, sizeof sys.pkg, "meow_net");
|
||
CHECK(bt_write_authorize(&other, 1, "connect") == MEOW_ERR_PERM); /* 非系统 → 拒 */
|
||
CHECK(bt_write_authorize(&sys, 1, "connect") == MEOW_OK); /* 系统+meow → 放 */
|
||
CHECK(bt_write_authorize(&sys, 0, "connect") == MEOW_ERR_PERM); /* 系统+hiby → 拒 */
|
||
CHECK(bt_write_authorize(&other, 1, "status") == MEOW_OK); /* 读级任意 → 放 */
|
||
|
||
(void)cmd;
|
||
if (g_fail) { printf("\nBT_CTL TEST: %d FAIL\n", g_fail); return 1; }
|
||
printf("\nBT_CTL TEST: ALL PASS\n");
|
||
return 0;
|
||
}
|