MeowOS
dafe31784d
- ⑧ 一键清除: mnp_clearable(ongoing/media/progress) 红线保留活动通知; 先 meow_notif 转储(notifications.log+10MB滚动) 再清空显示; 勿扰左半+清除右半(NCP_DND_SPLIT_X=fb_xres/2)对称, 命中互斥 - ⑨ 面板跟手下拉/半程可回: reveal 连续映射 1:1 跟手(mnp_drag_progress/reveal), 松手 mnp_drag_anchor(fix,40%)=1→补到1024/0→回0收回; 与⑦行左滑/列表滚动/meow_edge_back 互斥; 复用快照+局部刷(panel帧/新露出条) - meow_ui.a 零改动(d249c6e6); launcher=b140e9e5; 宿主189项ok; 新增0warn - NOTIFICATION_SYSTEM §9 增 ⑧⑨; MEOW_APP_SDK §5.7 收合动画落点标注
9573 lines
518 KiB
C
9573 lines
518 KiB
C
/* meow_launcherd.c — R3 Pro II Plan B zero-patch app launcher daemon.
|
||
*
|
||
* M2.53 亮度接管修正（开机/切到 MeowOS 亮度被重置为 25/16）：
|
||
* - 根因：HibyOS 播放器运行/恢复画面会把它自己的背光下限（16/25）写进 sysfs，
|
||
* MeowOS 主屏接管时又以 read_brightness() 读到的该值当「当前亮度」
|
||
* （saved_brightness / meow_saved_brightness），从不重应用用户 display.brightness，
|
||
* 故用户设的低亮度（<25，最低到 1）被覆盖。
|
||
* - 修法：run_menu 主屏接管（had_player==0，播放器已死=真接管）时调
|
||
* apply_user_brightness()：读 settings display.brightness（经新导出的
|
||
* meow_settings_brightness_clamped()，clamp 下限 brightness_min 默认 1、上限 100）
|
||
* → write_brightness 强写回，覆盖播放器残留的 16/25。
|
||
* - 边界：播放器会话期间的覆盖菜单（had_player==1）不压回——播电影时亮度归播放器管；
|
||
* ensure_backlight/restore_backlight 仍用 saved_brightness（覆盖会话=播放器真实值），
|
||
* 不改为用户值，避免菜单关闭瞬间抢播放器背光。
|
||
*
|
||
* M2.46-2 状态栏 5 问题（2026-08-29）：
|
||
* ① 亮度图标主题色（on_surface_variant 灰 → on_surface 主色）+ 拖动亮度滑条时状态栏百分比实时跟：
|
||
* 根因 s_commit brightness 分支只 write_brightness 未同步 g_sys.brightness/未重绘；补
|
||
* g_sys.brightness=v + paint_sb_right()（与随后 meow_sys_refresh 从 sysfs 回读一致不打架）。
|
||
* ② 右簇音/电顺序互换：最右由「音量」改「电量」（绘制顺序先电量后音量，右→左：电→音→蓝牙→WiFi→亮度）。
|
||
* ③ 图标视觉对齐：sb_blit_icon 按 ink 边界居中 + 主图标等比等大（SB_ICON_INK=16），音量不再「小一圈/
|
||
* 下边距」；ink 垂直中心对齐状态栏文字中心（g_sb_icon_cy=SB_ICON_CY=14，见 sb_text_y），图文同中线。
|
||
* ④ WiFi 图标随信号分档：新增 wifi_signal_level() 读 /proc/net/wireless wlan0 level（dBm），
|
||
* ≥-60 强 / [-60,-75) 中 / <-75 弱，选 SB_ICON_WIFI_STRONG/MEDIUM/WEAK（新位图追加进 sb_icons.h）；
|
||
* 强弱档保留自然 ink（少一格即语义），满格/强档走等大；wifi_on 为假不画（保持现状）。
|
||
* （⑤ 数字随亮度刷新已并入①。）
|
||
*
|
||
* M2a 通知存储 + 原生 IPC（2026-08-29，阶段 D 链开端）：
|
||
* - 新增 meow_notif.h/.c（NOTIFICATION_SYSTEM.md §4/§7/§8）：通知结构对齐 freedesktop
|
||
* + MeowOS 扩展（target_activity/progress）；内存配额（每 App ≤ notify.categories 类型、
|
||
* 每类型活跃 ≤ notify.category_quota、媒体每 App ≤ notify.media_quota，系统事件作
|
||
* app_id="system" 同走配额）；TTL 10s 转储钩子（§8，TF 落盘 M2c 后置，预留 notif_dump_cb）；
|
||
* 满丢该类型最旧条（ring 语义）；ONGOING 常驻（转储后仍保留，服务死随清）。
|
||
* - meow_settings 默认表新增 notify.categories/category_quota/media_quota（B2a 后端）。
|
||
* - IPC：ipc_dispatch 新增 MSG_NOTIFY→MSG_NOTIFY_ACK、MSG_NOTIFY_DISMISS→MSG_ACK、
|
||
* MSG_NOTIFY_PROGRESS→MSG_ACK（实时进度仅改内存活跃槽，不落盘）；
|
||
* MSG_NOTIFY_LIST 为守护→App 下行（M5 接入）。meow_ipc 测试钩子新增 notify/dismiss 子命令。
|
||
* - meow_notif_before_poweroff() 挂入 sys_do_reboot()：正常电源事件前先转储未上卡通知再清板载。
|
||
* - 通知模型补全（2026-08-30，用户定案）：SDK→IPC→存储→dump 全链路补 urgency(0-3)/
|
||
* icon（空→按 app_id 回退该 app 默认图标）；progress 实时仅改内存（MSG_NOTIFY_PROGRESS），
|
||
* TF 快照只在创建/结束(100% 或 dismiss)（meow_notif_dump_tf 写当时值）。
|
||
*
|
||
* B2a 统一系统设置后端（2026-08-29）：
|
||
* - 新增 meow_settings.h/.c（SYSTEM_SETTINGS.md §3/MEOWOS_API §2）：全部系统设置
|
||
* 抽象为「名称/类型/默认/取值域」扁平表，单点存板载 /usr/data/meow/settings.conf；
|
||
* clamp 集中 set，变更即广播 listener，提供 get/set/枚举/list/导入导出。
|
||
* - settings_load()（手写解析 settings.conf）→ meow_settings_init() + 缓存同步；
|
||
* settings_save_volume() → meow_settings_save()；settings_volume 等全局仅作缓存，
|
||
* 由 meow_settings 的 set 回调/加载后同步，DAC/状态栏/息屏/刷新率调度照旧引用。
|
||
* 音量渐变(1% 爬)仍只在渐变结束落盘一次，不逐 1% 写盘（UBIFS 低频）。
|
||
* - 本批只建后端 + 迁移 audio/display 已有设置；实体设置页(B2b)/Web 面板(C)后复用。
|
||
*
|
||
* M2.39 设置页第二批 7 问题（2026-08-29，版本 0.7.34）：
|
||
* ① 亮度滑条 1/4 卡 25：设备 settings.conf 残留旧 brightness_min=25（覆盖默认 1）致
|
||
* clamp 回 25。默认表维持 1；加载时把恰好为旧默认 25 的 brightness_min 迁移为 1 并落盘，
|
||
* 亮度滑条可调到「极暗但可见」的 1（防黑屏下限仍由 brightness_min 控）。滑条上限 101→100
|
||
* （101 闪屏）。③ 子菜单值刷新核验：set 后 after_modal 整帧重绘，s_display_value 用 get_enum/
|
||
* get_str 重读，值即时更新（已核验，无需额外改动）。
|
||
* ④ 设置页音量键不再当光标移动（用户约束）——改调系统音量（vol_ramp_begin/tick 线性渐变写
|
||
* DAC + 刷状态栏 VOL）；仅 run_settings_page 移除，电菜单/应用列表的系统级音量导航不动；
|
||
* 选择器子模态内部仍保留音量键=移动选项高亮（属「选值」另一语义）。
|
||
* ⑤ 新增「网络」分组：WiFi 开关(network.wifi_enabled)+已连接 SSID+已保存网络(下拉 connect
|
||
* wpa_cli select_network)+附近设备(WiFi scan/scan_results)+蓝牙开关(network.bluetooth_enabled)
|
||
* +已配对设备；读取全部经带超时 popen(wpa_cli/bluetoothctl)，扫描异步触发，绝不阻塞主循环；
|
||
* ensure_wifi() 尊重 wifi_enabled（关=0 不再自动连网）。⑥ 设置页支持左缘右滑返回（复用共享
|
||
* 判定 meow_edge_back()，与 SDK 全局左缘返回同一语义）。⑦ 底部「返回」改用像素左向箭头+「返回」，
|
||
* 点阵回退字库缺 '‹' 字形不再渲染方框。
|
||
*
|
||
* M2.40 设置页网络/子菜单 5 问题（2026-08-29，版本沿 0.7.34）：
|
||
* ① 子菜单点值无反应（严重）：s_dd_modal 触摸解析用裸 ddx/ddy 在按下边沿锁原点，踩 goodix
|
||
* 「BTN_TOUCH 先于 ABS」时序 → 锁到 -1/上一手势残留 → 点选项被判「点卡片外=取消」→ 菜单
|
||
* 关闭无变化。改为抬手用抬手时刻最新 abs 坐标判定（与 meow_touch mt_up 同源），点值真正生效。
|
||
* ② WiFi 扫描把 MAC 当独立设备：net_wifi_scan 按 BSSID 去重（同 BSSID 只留一条，优先具名，
|
||
* 后到且有 SSID 覆盖先到空 SSID 行），隐藏网络显示「(隐藏网络)」，不再与具名条目重复。
|
||
* ③ 已保存/已连接中文 SSID 乱码：wpa_cli list_networks/status 对非 ASCII 输出 \xNN 转义文字，
|
||
* 新增 wpa_decode_ssid() 还原成真实 UTF-8 字节存入 name。
|
||
* ④ 网络分组命名/顺序：SMENU「附近设备」→「附近WiFi」（其顺序本就正确）；蓝牙「蓝牙设备」改
|
||
* 读附近扫描发现（已配对+未配对），新增 net_bt_scan_trigger()/net_bt_scan()：后台有界驱动
|
||
* bluetoothctl（scan on→sleep 4→scan off→devices→quit）写 /tmp 缓存，system() 尾部 & 立即
|
||
* 返回，绝不死循环；扫描中显示「扫描中...」，无缓存退回已配对列表。
|
||
* ⑤ WiFi 扫描触发本就立即返回（wpa_cli scan），net_wifi_scan 读超时 1800→2500ms（留扫描出结果余量）。
|
||
*
|
||
* M2.41 B2b 主题三方式（手动深色/手动浅色/时段自动，2026-08-29，版本 0.7.38）：
|
||
* - 新增设置键 display.theme_mode（enum manual/auto，默认 manual）+ 深色时段两键
|
||
* display.theme_dark_start/end（int 分钟 0-1439，默认 0）；display.theme 保留为手动深浅。
|
||
* - s_ui_theme：manual=直读 display.theme（原行为不变）；auto=读时段两键+本地分钟，按
|
||
* [start,end) 判定（start>end 跨午夜；start==end 视为未配置 → 回退 manual 读 display.theme）。
|
||
* - 设置页「主题」行改绑 display.theme_mode（手动/时段自动），新增「主题深浅」(display.theme)
|
||
* 与「深色时段开始/结束」两行（SC_SLIDER 0-1439，step 15，显示 HH:MM；start==end 显示「未设置」）。
|
||
*
|
||
* M2.29 电源菜单加「升级模式」按钮（2026-08-29，版本 0.7.24）：
|
||
* - 电源菜单 PM_NUM 4→5，新增「升级模式」按钮（index 3）：动作 =
|
||
* system("/usr/bin/bootmode.sh Recovery")（写 mtd5=ota:kernel2）+ sys_do_reboot(RESTART)，
|
||
* uboot 读 mtd5=ota:kernel2 引导 kernel2 升级模式（自动刷 TF 卡 r3proii.upt）。
|
||
* - 布局 2×2 → 2 列×3 行（行 y 300/420/540），取消仍默认选中（index 4，右下=安全项）。
|
||
* - MEOWOS_VERSION 0.7.23 → 0.7.24。
|
||
*
|
||
* M2.25 Launcher 统一触摸接口 meow_touch（2026-08-29，版本 0.7.20）：
|
||
* - 新增 meow_touch.h/.c：轻量、不依赖 SDK 的触摸手势解析（goodix 时序免疫：BTN_TOUCH=1
|
||
* 不锁原点，等按下后首个有效 ABS 才锁；抬手位移 >= MEOW_TOUCH_SWIPE_THRESH 判滑动）。
|
||
* - 电源菜单 show_power_menu / 确认框 confirm_reboot_player 触摸解析迁到 meow_touch：
|
||
* 修「确认框/电源菜单点两下」—— 原来两者各自独立解析，按下边沿用当时 t_last（可能
|
||
* 残留 -1/旧坐标）锁原点 → 抬手命中失败；现统一原点锁定，点一下即确认。
|
||
* - 黑屏修复：电源菜单关闭（尤其触摸点「取消」）后，kd_* 防抖状态因阻塞式
|
||
* show_power_menu() 冻结，返回后 stable 与 raw 错配 → 误判电源「单击」→ meow_toggle_panel
|
||
* 关掉面板（黑屏且难唤醒）。菜单关闭后 memset 重播 kd_* + 以当前 raw 对齐 m_prev_*。
|
||
* - 应用运行期电源菜单（M2.24 watchdog 路径）关闭后重播 save_pow/save_keys 防误判 key_edge。
|
||
* - 应用列表（run_menu 内联解析，M2.23 已修）保留内联（含 cooldown/滑动日志/行带判定），
|
||
* 语义与 meow_touch 一致。
|
||
* - 版本 0.7.19 → 0.7.20。
|
||
* M2.24 全面按键接管（2026-08-29，版本 0.7.19）：
|
||
* - launcher 应用运行期（waitpid 轮询）消费 watchdog 的电源长按菜单请求
|
||
* （/tmp/meow_power_menu）：SIGSTOP app → 写 /tmp/meow_power_menu_active（watchdog 让位）
|
||
* → 弹统一电源菜单 show_power_menu（复用，一处绘制）→ 关菜单 → SIGCONT app。
|
||
* 电源单击=息屏/亮屏、音量=调音量、播放/上下曲=抓消费由 watchdog 在应用期统一处理；
|
||
* launcher 的 run_menu 菜单期语义不变（KEY_CONTROL_DESIGN §3 统一监听点）。
|
||
* - launch_app 末尾 settings_load()：应用期 watchdog 可能改音量（settings.conf 同源），
|
||
* 返回菜单前 re-load，保证菜单音量与真实 DAC 一致。
|
||
* - 版本 0.7.18 → 0.7.19。
|
||
* M2.23 菜单触摸判定修复（2026-08-29，版本 0.7.18）：
|
||
* - 手势原点锁定：BTN_TOUCH=1 只标「已按下」，t_down_x/y 延迟到本次按下后首个有效坐标才锁，
|
||
* 杜绝上一手势残留(-1/旧坐标)当手势起点（修「按下坐标=-1」）。
|
||
* - 滑动不启动：抬手位移 >= MENU_SWIPE_THRESH(65) 判为滑动，不 launch、不做行判定
|
||
* （修「位移 85 被当 tap 命中行」；为将来左右滑切屏预留，本轮只判滑动）。
|
||
* - 行判定收紧：仅当 tap（位移<阈值）且 ty 落进行带才 launch_app；行带外 tap(空白)不触发。
|
||
* - 版本 0.7.17 → 0.7.18。
|
||
* M2.16 无闪烁渲染 + 刷新率调度 + 按键防抖/单击长按（2026-08-29，版本 0.7.11）：
|
||
* - 无闪烁渲染地基：RAM 离屏后备缓冲（现由 SDK 提供），所有绘制
|
||
* （put_px/meow_font/dim_screen/draw_menu/statusbar/电源菜单/确认框）一律画进 SDK back_buf；
|
||
* 呈现统一走 SDK meow_ui_flush() = FBIO_WAITFORVSYNC 等垂直同步 + 一次 memcpy(dirty 区或全帧)
|
||
* 到 fb0(buffer0, yoffset=0)。fb 从不被渐进绘制、绝无中间态/无撕裂。空闲无 dirty → 不画不拷。
|
||
* - 脏区追踪 meow_dirty_add(x,y,w,h)（桥进 SDK 脏追踪）：矩形合并集（相交吸收为 bbox，
|
||
* 超限转全屏）；状态栏时钟/右侧信息格只在"那个格"变化时标脏（paint_sb_clock/paint_sb_right）。
|
||
* - 刷新率调度：display.refresh_rate(60/30/15，默认 60，屏幕 62Hz 锁 60 不逼瓶颈) +
|
||
* display.refresh_always_max(1=恒 max 不降档)。A-1/A-2 起该帧率门控+自适应降档 governor
|
||
* 归口 SDK present（meow_ui_set_refresh_rate/set_refresh_always_max），launcher 不再自带一套。
|
||
* - A-1/A-2（0.7.23）：launcher 与 app 统一渲染栈（SDK back_buf + meow_ui_flush present + 帧率门控），
|
||
* launcher 不再自建 back_buf/meow_present/refresh_governor；播放器 fb 双缓冲交互（fb_backup_player/
|
||
* fb_norm_buf0/FBIOPAN/yoffset）保留——与上屏 present 分属不同层。
|
||
* - 按键防抖 + 单击/长按：每键值须稳定 KEY_DEBOUNCE_MS(40ms) 才认（抗 ADC 抖动"点一下跳5-6下"）；
|
||
* 按压 <CLICK_MS(400ms)=单击一次，≥=长按（连续；如音量长按连续渐变）。音量渐变只在稳定边沿触发。
|
||
* - 本批次不做：通知中心 UI / MPRIS / 服务保活（后续里程碑）。播放器不动。
|
||
*
|
||
* 阶段 D · M0+M1：IPC 骨架 + 路由表（FRAMEWORK_DESIGN §1/§2/§9，版本 0.7.10）：
|
||
* - M0 IPC 骨架：AF_UNIX /usr/data/meow_ipc.sock（unlink+bind+chmod0666+listen4），
|
||
* IPC 线程只读帧+解析+入队（SPSC 无锁环，__sync 原子），eventfd 唤醒主循环；
|
||
* 帧解析 = 16B 头（magic=0x4D4F5701/version=1/type/req_id/len，LE）→ 校验 → 读负载。
|
||
* MSG_HELLO→ACK / 未知→MSG_ERR；主循环 meow_ipc_process() 每 10ms 排空（零阻塞，
|
||
* 事件fd 仅为低延迟；即使 eventfd 失败，10ms 轮询仍保证排空）。日志埋点。
|
||
* - M1 路由表 + 解析：app.json 扁平行 route.<id>=path / framework=true /
|
||
* service.<svc>=mode:restart:max:window_ms / icon；scan_apps 解析入 g_accts 注册表；
|
||
* MSG_ACT_DECLARE（运行时并集覆盖）/ACT_QUERY/ACT_RESULT；resolve_chain(app,activity)
|
||
* 返回 [root..target] 链路与深度（route 缺失→深度1兜底；activity 未注册→MEOW_ERR_NOENT）。
|
||
* - 本阶段不做：通知存储（M2）、导航栈/launch_activity（M3）、UI（阶段 B）。播放器不动。
|
||
* 测试钩子：meow_ipc（patch_v2/meow_launcherd/meow_ipc.c，与 evtool 同定位）+
|
||
* launcher --ipc-only N --ipc-sock <path>（qemu sim 免 fb/输入）。
|
||
*
|
||
* M2.14 音量渐变批次（2026-08-29，版本 0.7.9）：
|
||
* - audio.volume_step 默认 2 → **1**（SYSTEM_SETTINGS.md：默认 1，可配 1-5，clamp 上限 5）。
|
||
* - 线性渐变：settings_volume_adj(±step) 不再一次跳 N%，改起 vol_ramp_begin/tick 状态机——
|
||
* 每主循环 tick 按 **1%** 递增爬向目标（VOL_RAMP_MS=15ms 墙钟节流，不阻塞主循环），
|
||
* 每 1% 写一次 meow_dac_vol_write（真实 DAC）；step>1 时不突兀、step=1 一步即达。
|
||
* - 长按持续渐变：到目标若按键仍按住则再延一段（vol_ramp_target += dir*step）直到松开/到上限；
|
||
* 连按=每次边沿叠加继续。落盘只在渐变结束一次。状态栏 VOL 随渐变刷新（显示爬升值/最终值）。
|
||
* MEOWOS_VERSION 0.7.8 → 0.7.9。
|
||
*
|
||
* M2.13 真实 DAC 音量批次（2026-08-28，版本 0.7.8）：
|
||
* - 软件占位音量 → 真实 CS43198 DAC 音量：settings_volume_set/adj 每次变更即经
|
||
* amixer cset（SNDRV_CTL_IOCTL_ELEM_WRITE）直写 /dev/snd/controlC0 的
|
||
* "Left/Right Playback Volume"（numid 1/2，0-255 映射 0-100）到双片 CS43198。
|
||
* 新增 meow_dac_vol_write()/meow_vol_get()/meow_vol_set()；进 MeowOS 时
|
||
* meow_sys_refresh 同步 DAC 至当前档。尊重上限：audio.volume_max（默认 100）clamp；
|
||
* 跳步更细 audio.volume_step（默认 2，可配回 5）。
|
||
* - 读回局限（§18.39）：codec 驱动音量 get 为 dummy 恒 0（amixer cget 死镜像成因），
|
||
* /dev/i2c-3 被驱动占用（i2cget busy），故 meow_vol_get() 返回我方写入跟踪值。
|
||
* MEOWOS_VERSION 0.7.7 → 0.7.8。
|
||
*
|
||
* M2.12 迁移批次（2026-08-28，版本 0.7.7）：
|
||
* - 外围 CLI（curl/socat/tmux/jq/rsync/nano/htop/ncdu/file/xxd）自 rootfs /usr/bin 迁至
|
||
* TF 卡 MeowOS/opt/bin/（Tools 皆静态 MIPS，无 .so 依赖）；MeowOS 启动时卡在则 PATH
|
||
* 前插 /usr/data/mnt/sd_0/MeowOS/opt/bin（卡不在跳过）。固件 rootfs 瘦身（目标 ≤42MB）。
|
||
* - MeowAPPs 数据目录（exFAT 无符号链接 → 用环境变量，不做 symlink）：launch_app 启动前
|
||
* 调 meow_app_prepare(exec) 建 MeowData/<pkg>/{data,cache}（如缺），并向子进程注入
|
||
* MEOW_DATA_DIR/MEOW_CACHE_DIR（与 MEOW_LOG_DIR 同族）。新增 .mpk 安装/导出接口
|
||
* meow_pkg_install/export + CLI 钩子 --pkg-install/--pkg-export（本期接口，UI 后期）。
|
||
* - 零卡依赖审查：settings 在 /data、字库/应用/日志/opt 均可缺省回退；拔卡不死、插卡自建。
|
||
* MEOWOS_VERSION 0.7.6 → 0.7.7。
|
||
*
|
||
* M2.11 修复批次（2026-08-28，版本 0.7.6）：
|
||
* - A 系统状态全量重抓：新增 meow_sys_state + meow_sys_refresh()，每次进 MeowOS
|
||
* 重抓 电量/WiFi/蓝牙/音量/亮度/存储/系统；主循环 10ms 热键轮询绝不读系统态；
|
||
* 全量进系统一次 + 1s 轻刷时钟/电量/WiFi；状态栏统一读快照（不再 amixer 死镜像）。
|
||
* - B 电源菜单「按电源键」触发关机：电源=按当前项确认；默认光标改「取消」（安全项，
|
||
* 避免未导航按电源即关机）；取消→只关菜单绝不关机；关机/重启/回HibyOS→按对应项才执行；
|
||
* 菜单里按电源键本身绝不触发 poweroff。菜单返回后清 pwr_hold_at/pwr_menu_state，
|
||
* 杜绝「按住电源开菜单→确认→仍按住→run_menu 8s 强关」残留覆盖。
|
||
* - C TF 卡热插拔最佳努力：拔出检测（/proc/mounts + /dev/mmcblk0 消失）→ 标记无卡、
|
||
* 停止扫描、优雅中止不崩；插入检测 → 自动挂载 + 重扫 MeowAPPs + 重载字库 + 日志迁回；
|
||
* 写日志/挂载前确认，失败回退内存；扫描遍历安全终止防死循环。
|
||
* - D 运行中应用卡拔：前台 MeowAPP 二进制/资源在卡上，卡被拔 → 启动器主动 SIGTERM
|
||
* 应用（干净退出，避免等 SIGBUS 崩），显示「卡已移除，应用已结束」，回菜单。
|
||
* - E：音量键调软件音量（settings audio.volume 0-100 步进5 clamp，持久化）；
|
||
* 蓝牙读实际 powered（关=灰/不显示）；WiFi 读实际（operstate）；唤醒偶发加日志。
|
||
* MEOWOS_VERSION 0.7.5 → 0.7.6。
|
||
*
|
||
* M2.10 修复批次（2026-08-28）：
|
||
* - Bug：电源菜单「回到 HibyOS」点一下就关机。根因：电源菜单 8s 强关（按住电源≥8s 绕过）与
|
||
* 用户点选按钮竞争 —— 8s 检查在触摸处理之前，用户按住电源开菜单后（仍按着）点「回到HibyOS/
|
||
* 重启」，8s 一到先触发强关（poweroff）而非执行所选动作。修法：用户一旦与菜单互动（音量导航/
|
||
* 触摸/播放/电源确认）置 pm_interacted=1，8s 强关取消；8s 强关移到输入处理之后。另复核
|
||
* 「回到HibyOS」动作即 set_boot_default_hiby()+sys_do_reboot(RESTART)（RESTART 已真机确认会
|
||
* 重启，非关机）。版本 0.7.5。
|
||
*
|
||
* M2.9 修复批次（2026-08-28）：
|
||
* - Bug 2：电源菜单 POWER MENU 标题 y=300 与 2×2 按钮（pm_y0 顶缘 320）重叠被遮，
|
||
* 标题上移到 y=150（标题在上、按钮在下，不重叠）。
|
||
* - Bug 4：「返回播放器」确认框是/否按钮主循环内每 10ms 全刷 → 频闪；改为 dirty 绘制
|
||
* （仅 sel 变化才重画两钮），提示行移出循环只画一次。
|
||
* - 复核电源菜单动作直连 syscall(SYS_reboot)（M2.7 已改，本批确认路径一致）。
|
||
* 版本 0.7.4。
|
||
*
|
||
* M2.8 修复批次（2026-08-28）：Bug 3 残留 —— MeowOS 主屏用电源键息屏后再按电源，
|
||
* 只有背光无画面（M2.7 加了 fb_norm_buf0 仍黑）。根因：fb_norm_buf0 在缓存
|
||
* fb_active_yoffset==0 时短路不再重发 FBIOPAN_DISPLAY，而 FBIOBLANK(4)->(0) 后 LCDC
|
||
* 扫描地址可能已复位到非 buffer0/失效位置，缓存仍是 0 导致真正的 re-pan 从未发出；
|
||
* 且唤醒不是 draw 事件，buffer0 内容可能为空。修法：新增 fb_pan_buf0_force（无条件
|
||
* 重发 pan）+ meow_repaint_surface（唤醒时把当前界面整体重绘到 buffer0 再强制 pan），
|
||
* 电源菜单/确认框也在「息屏态打开」时强制 re-pan。版本 0.7.3。
|
||
*
|
||
* M2.2 修复批次（2026-08-28）：
|
||
* - MeowOS 常驻主界面：启动即自绘应用列表主界面（buffer0+pan0，不等热键），
|
||
* 绝不遗留播放器死帧；播放器已死时不备份/不冻结/不 SIGCONT、不恢复死帧。
|
||
* - BACK TO PLAYER（播放器已死）→ 显示「重启后返回播放器」提示并留在主界面。
|
||
* - MeowOS 系统拔营：无播放器时由 launcher 接管 TF 卡挂载（/dev/mmcblk0 ->
|
||
* /usr/data/mnt/sd_0, exfat）与 WiFi 联网（/usr/bin/wifi_up.sh），后台周期重试。
|
||
*
|
||
* Design (see ANALYSIS.md §18):
|
||
* - PASSIVE multi-reader: never EVIOCGRABs, never injects events.
|
||
* Physical key events multicast to all evdev readers on this kernel,
|
||
* but injected events (write()) update device state yet are NEVER
|
||
* delivered to any client (vendor input-subsystem quirk, verified).
|
||
* => keys are read via EVIOCGKEY state polling (immune to any grab,
|
||
* exact mechanism the player itself uses for the power key), touch is
|
||
* read via normal event reads on event1 (not grabbed by the player).
|
||
* - Hotkey (v6.5): HOLD power, then a SINGLE VOL_DOWN tap 60-2500ms after
|
||
* the power-down edge opens the menu. The player sees the power press (its
|
||
* screen-off flow starts — accepted side effect; the menu open undoes it
|
||
* via the verified unblank + bring-backlight-only-if-dark logic) and the
|
||
* VOL_DOWN tap (volume -1 — accepted). Legendary sequence mode
|
||
* (N quick taps of one key, default VOL_UP x3) remains available via
|
||
* meow.conf hotkey=seq; the seq taps raise volume, snapshotted and
|
||
* restored on trigger. A two-key chord on event2 is impossible (its four
|
||
* keys share ONE ADC channel), and the PREVIOUS key's GPIO (PC28) never
|
||
* fires on this unit (§18.12). Configurable via MeowAPPs/meow.conf:
|
||
* hotkey=power_voldown|seq / hotkey_seq=volup,volup,volup /
|
||
* hotkey_seq_gap=600. Inside an app, VOL_DOWN x3 quick taps force-kill
|
||
* the app (volume restored too).
|
||
* - Menu: SIGSTOP hiby_player, bring the backlight back ONLY if the panel
|
||
* is dark (brightness 0 / blanked — the player's own screen timeout or
|
||
* standby); a normal brightness is left untouched (Bug A: the old
|
||
* force_backlight() yanked the brightness to 101 on every menu open),
|
||
* draw app list on fb0 (scan /usr/data/mnt/sd_0/MeowAPPs/<id>/app.json,
|
||
* 5 edge cases), navigate with touch or keys, launch app via
|
||
* fork/execve/waitpid, spawn meow_watchdog <pid> for the virtual back
|
||
* key, then SIGCONT.
|
||
* - Double-buffer (v6.6): fb0 is double-buffered — FBIOGET_VSCREENINFO
|
||
* reports yres_virtual=1440 (2x720), smem_len=1382400 (exactly 2
|
||
* frames), ypanstep=1 (verified on device), and the DISPLAYED buffer is
|
||
* selected by fb_var.yoffset via FBIOPAN_DISPLAY (0x4606, verified to
|
||
* flip 0<->720). The player's power/screen-off redraw leaves yoffset on
|
||
* a back buffer, so the menu drawn ONLY at mmap offset 0 (buffer0) can
|
||
* land on the buffer the panel is NOT showing -> menu invisible, screen
|
||
* frozen on the player's last frame (the v6.5 bug). Fix: at menu open
|
||
* snapshot the player's displayed frame (the buffer at the current
|
||
* yoffset) into a heap backup, pan the display to buffer0 (what this
|
||
* code AND every app draw to — apps mmap exactly one frame at offset 0
|
||
* and never pan), draw the menu/app-list to buffer0, and on session end
|
||
* copy the backup back to the player's buffer + pan to the original
|
||
* yoffset so a SIGSTOPped player that does not redraw (event-driven,
|
||
* §18.15) still shows its own frame. fb is mapped over the FULL virtual
|
||
* framebuffer (both frames), not just one.
|
||
* - Backlight discipline (2026-08-28 hotfix): the launcher NEVER touches
|
||
* FBIOBLANK outside the menu. The player owns the panel blank state:
|
||
* the bkl_time ("背光时间") screen timeout writes brightness 0 +
|
||
* FBIOBLANK(4) and the player stops drawing while it believes the panel
|
||
* is blanked. The old backlight keeper restored brightness +
|
||
* FBIOBLANK(0) behind its back, which wedged the player's display state
|
||
* machine (UI frozen, keys dead — device log: keeper fired at 40.9s
|
||
* post-boot, player wedged). Do NOT reintroduce unblanking outside the
|
||
* menu. Inside the menu: unblank_panel() runs AFTER stop_player() so
|
||
* the frozen player cannot re-blank behind the menu (v6.2 hotfix —
|
||
* unblanking while the player was still running let it re-blank, so the
|
||
* menu was drawn on a black panel); on session end restore_backlight()
|
||
* re-blanks first (if the menu opened while blanked) and only then the
|
||
* player resumes, keeping its state machine consistent. ensure_backlight
|
||
* / restore_backlight only ever write brightness (harmless; ignored
|
||
* while the panel is blanked) and bl_power.
|
||
* - Player watchdog: SIGSTOP does not exit the process, so the
|
||
* hiby_player.sh "exit -> reboot" watchdog never triggers.
|
||
* - UI: pure black background by default (configurable via
|
||
* MeowAPPs/meow.conf bg_color=RRGGBB), slim 20px status bar with
|
||
* clock / battery / wifi.
|
||
* - Logging: unified to the TF card MeowOS/logs/meow_<bootts>.log
|
||
* (boot timestamp from wall-clock minus uptime); when the card is absent
|
||
* (S90 starts before the card mounts) logs go to a bounded /tmp boot
|
||
* buffer (/tmp/meow_boot.log, recoverable over SSH, survives daemon
|
||
* restarts) and are moved into the card log automatically once the card
|
||
* mounts (periodic retry in the main loop — no menu needed). NEVER write
|
||
* onboard storage, which is nearly full. Watchdog gets
|
||
* MEOW_LOG_FILE, apps get MEOW_LOG_DIR via the environment.
|
||
*
|
||
* Static MIPS32r2 musl build:
|
||
* ~/Project/R3ProII/.tools/zig-mipsel-cc -Os -static meow_launcherd.c -o meow_launcherd
|
||
*/
|
||
#include <stdio.h>
|
||
#include <stdlib.h>
|
||
#include <string.h>
|
||
#include <stdarg.h>
|
||
#include <unistd.h>
|
||
#include <fcntl.h>
|
||
#include <errno.h>
|
||
#include <signal.h>
|
||
#include <dirent.h>
|
||
#include <stdint.h>
|
||
#include <time.h>
|
||
#include <sys/ioctl.h>
|
||
#include <sys/mman.h>
|
||
#include <poll.h> /* 0-warning：musl 把 <sys/poll.h> 重定向到 <poll.h>，用后者消除 -W#warnings */
|
||
#include "meow_touch.h" /* M2.25：Launcher 统一触摸接口（电源菜单/确认框复用） */
|
||
#include "pm_icons.h" /* M2.32：Material Symbols rounded 图标（电源菜单圆钮，alpha 位图+主题色） */
|
||
#include "sb_icons.h" /* MD3 状态栏/通知中心图标（Material Symbols rounded，32x32 单通道 alpha） */
|
||
#include <sys/wait.h>
|
||
#include <sys/stat.h>
|
||
#include <sys/syscall.h> /* Bug 2：直连 reboot(2) syscall 用 */
|
||
#include <pthread.h> /* M0：IPC 线程 */
|
||
#include <sys/eventfd.h> /* M0：IPC→主循环唤醒（EFD_NONBLOCK） */
|
||
#include <sys/socket.h> /* M0：AF_UNIX IPC */
|
||
#include <sys/un.h> /* M0：sockaddr_un */
|
||
#include <linux/input.h>
|
||
#include "meow_font.h" /* M2.6: 预渲染位图字体（agent-28 交付；对象已打包进 meow_ui.a，launcher 不再单独链 meow_font.a） */
|
||
#include "meow_ipc.h" /* M0+M1：IPC 协议帧/消息/负载定（与 meow_ipc 工具同源） */
|
||
#include "meow_settings.h" /* B2a：统一系统设置后端（SYSTEM_SETTINGS.md §3/MEOWOS_API §2） */
|
||
#include "meow_notif.h" /* M2a：通知存储 + 分发（NOTIFICATION_SYSTEM.md §4/§7/§8） */
|
||
#include "meow_ui.h" /* A-1/A-2：launcher 用 SDK 渲染栈（meow_ui_fill_rect/text/flush/theme） */
|
||
#include "meow_ui_internal.h" /* A-1/A-2：launcher 与 SDK 共用 back_buf + 手动脏模型桥接（mark_full/back_buf） */
|
||
#include "meow_notif_panel.h" /* 阶段B：通知中心面板纯逻辑（header-only，可单测） */
|
||
|
||
/* ---- paths ---- */
|
||
#define DEV_POWER "/dev/input/event0" /* md-gpio-keys: KEY_POWER, KEY_PREVIOUS */
|
||
#define DEV_KEYS "/dev/input/event2" /* jz adc keyboard: VOL, PLAY, NEXT */
|
||
#define DEV_TOUCH "/dev/input/event1" /* goodix-ts (not grabbed, shareable) */
|
||
#define MEOWAPPS "/usr/data/mnt/sd_0/MeowAPPs"
|
||
#define LOG_DIR_CARD "/usr/data/mnt/sd_0/MeowOS/logs" /* TF card logs（系统约定：系统文件放 MeowOS/ 下） */
|
||
#define PID_PATH "/usr/data/meow_launcherd.pid"
|
||
#define WATCHDOG1 "/usr/data/meow_watchdog"
|
||
#define WATCHDOG2 "/usr/bin/meow_watchdog"
|
||
/* M2.24 全面按键接管：watchdog（应用运行期）检测到电源长按≥3s 写此标记，launcher 在
|
||
* waitpid 轮询中消费 → SIGSTOP app + 弹统一电源菜单；菜单期 launcher 写 powmenu_active
|
||
* 让 watchdog 让位，菜单关后清除再 SIGCONT app。 */
|
||
#define POWMENU_MARKER "/tmp/meow_power_menu"
|
||
#define POWMENU_ACTIVE "/tmp/meow_power_menu_active"
|
||
#define BACKLIGHT "/sys/class/backlight/backlight_pwm0/brightness"
|
||
#define BACKLIGHT_POWER "/sys/class/backlight/backlight_pwm0/bl_power"
|
||
#define FB_DEV "/dev/fb0"
|
||
#define MOUNTS "/proc/mounts"
|
||
|
||
/* ---- key codes ---- */
|
||
#ifndef KEY_POWER
|
||
#define KEY_POWER 116
|
||
#endif
|
||
#ifndef KEY_PREVIOUSSONG
|
||
#define KEY_PREVIOUSSONG 165
|
||
#endif
|
||
#ifndef KEY_VOLUMEDOWN
|
||
#define KEY_VOLUMEDOWN 114
|
||
#endif
|
||
#ifndef KEY_VOLUMEUP
|
||
#define KEY_VOLUMEUP 115
|
||
#endif
|
||
#ifndef KEY_PLAYPAUSE
|
||
#define KEY_PLAYPAUSE 164
|
||
#endif
|
||
#ifndef KEY_NEXT
|
||
#define KEY_NEXT 163
|
||
#endif
|
||
|
||
/* ---- tuning ---- */
|
||
#define SEQ_DEFAULT_TAPS 3 /* default hotkey: VOL_UP x3 quick taps */
|
||
#define POLL_MS 10
|
||
/* Single source of truth for the MeowOS build version. The on-screen label
|
||
* ("MeowOS v<MEOWOS_VERSION> dev", bottom-right of the app list) and the
|
||
* etc/meowos_version file that build_fw_apps.sh greps from this line must both
|
||
* agree — change the version HERE only, never in two places. */
|
||
#define MEOWOS_VERSION "dev" /* M2.50：版本号唯一来源 = /etc/meowos_version(运行时 load_meowos_version 读)；本宏仅作文件缺失时占位，不再当实际版本，升级只改 /etc/meowos_version */
|
||
#define MAX_APPS 8
|
||
#define TOAST_MS 1500
|
||
#define LOG_SIZE_LIMIT (1u << 30) /* 1 GB total on the TF card */
|
||
/* 阶段 D · M1：Activity 路由注册表（g_accts）容量。route=app.json/声明的路由行，
|
||
* svc=service.<svc> 行（M1 仅解析存储，保活 M4 实现）。 */
|
||
#define MEOW_MAX_ACTS 16
|
||
#define MEOW_MAX_ROUTES 8
|
||
#define MEOW_MAX_SVCS 8
|
||
|
||
/* ---- event codes / ioctls ---- */
|
||
#define BTN_TOUCH 0x14a
|
||
#define ABS_X 0x00
|
||
#define ABS_Y 0x01
|
||
#define ABS_MT_POSITION_X 0x35
|
||
#define ABS_MT_POSITION_Y 0x36
|
||
#ifndef EV_KEY
|
||
#define EV_KEY 1
|
||
#endif
|
||
#ifndef EV_ABS
|
||
#define EV_ABS 3
|
||
#endif
|
||
|
||
#ifndef EVIOCGKEY
|
||
#define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len)
|
||
#endif
|
||
#define KEYBUF_WORDS 32 /* 1024 bits, covers KEY_MAX 767 */
|
||
|
||
/* ================================================================== */
|
||
/* unified logging: TF card MeowOS/logs/meow_<bootts>.log */
|
||
/* - no TF card at startup (S90 runs before the card mounts) -> */
|
||
/* bounded /tmp boot buffer (/tmp/meow_boot.log): recoverable */
|
||
/* over SSH, survives daemon restarts within the boot session */
|
||
/* - log_poll_card() (called periodically in the main loop) opens */
|
||
/* the card log as soon as the card mounts and moves the /tmp */
|
||
/* buffer into it — no menu needed */
|
||
/* - NEVER write onboard storage (nearly full) */
|
||
/* ================================================================== */
|
||
#define BOOT_BUF_TMP "/tmp/meow_boot.log"
|
||
#define BOOT_BUF_MAX (256 * 1024)
|
||
static int log_fd = -1; /* file log fd on the TF card */
|
||
static char log_dir[256] = ""; /* "MeowOS/logs" on card, or "" */
|
||
static char log_file[256] = ""; /* full path of the boot log file */
|
||
|
||
static int card_available(void)
|
||
{
|
||
/* TF card mounted? */
|
||
FILE *f = fopen(MOUNTS, "r");
|
||
if (!f) return 0;
|
||
char line[256];
|
||
int found = 0;
|
||
while (fgets(line, sizeof line, f)) {
|
||
if (strstr(line, " /usr/data/mnt/sd_0 ")) { found = 1; break; }
|
||
}
|
||
fclose(f);
|
||
if (!found) return 0;
|
||
/* writable logs dir? */
|
||
mkdir(LOG_DIR_CARD, 0755);
|
||
return access(LOG_DIR_CARD, W_OK) == 0;
|
||
}
|
||
|
||
static void boot_timestamp(char *out, size_t n)
|
||
{
|
||
/* reuse the timestamp cached for this boot session (/tmp is cleared on
|
||
* reboot) so repeated launcher starts in one boot share one log file */
|
||
int fd = open("/tmp/meow_bootts", O_RDONLY);
|
||
if (fd >= 0) {
|
||
int r = read(fd, out, (int)n - 1);
|
||
close(fd);
|
||
if (r > 0) { out[r] = 0; return; }
|
||
}
|
||
time_t now = time(NULL);
|
||
time_t up = 0;
|
||
fd = open("/proc/uptime", O_RDONLY);
|
||
if (fd >= 0) {
|
||
char buf[64];
|
||
int r = read(fd, buf, sizeof buf - 1);
|
||
close(fd);
|
||
if (r > 0) {
|
||
buf[r] = 0;
|
||
char *p = strchr(buf, ' ');
|
||
if (p) *p = 0;
|
||
up = (time_t)atof(buf);
|
||
}
|
||
}
|
||
time_t boot = (time_t)((double)now - (double)up + 0.5);
|
||
struct tm tm;
|
||
localtime_r(&boot, &tm);
|
||
strftime(out, n, "meow_%Y%m%d_%H%M%S", &tm);
|
||
/* cache for the rest of this boot session */
|
||
fd = open("/tmp/meow_bootts", O_WRONLY | O_CREAT | O_TRUNC, 0644);
|
||
if (fd >= 0) {
|
||
write(fd, out, strlen(out));
|
||
close(fd);
|
||
}
|
||
}
|
||
|
||
static unsigned long long now_ms(void)
|
||
{
|
||
struct timespec ts;
|
||
clock_gettime(CLOCK_MONOTONIC, &ts);
|
||
return (unsigned long long)ts.tv_sec * 1000 + ts.tv_nsec / 1000000;
|
||
}
|
||
|
||
/* M2.18 Bug 1: 无符号回绕保护的「空闲时长」。
|
||
* launch_app()/confirm_reboot_player() 是阻塞调用，主循环 for(;;) 顶部的 t=now_ms()
|
||
* 在 app 运行期间被卡住而停在启动前旧值；app 退出后 last_input_ms 被置为 app 退出
|
||
* 时刻（较大值）。若该圈 any_input==0（如触摸释放单独落在下一圈、音量/播放边沿发生在
|
||
* 更早圈），line「if (any_input) last_input_ms = t」不执行 → 检查处 t < last_input_ms，
|
||
* (unsigned long long)(t - last_input_ms) 无符号相减回绕成 2^64-Δ 的极大值，恒 >= 30s
|
||
* → 误判「空闲超时」→ 立即 meow_panel_off()。r3proii 日志铁证：auto screen-off after
|
||
* 30s idle (t=141578 last=145688)，仅 122ms 即被误判为已空闲 30s。凡判定空闲一律经此
|
||
* 函数取差：t < last（t 过期）时返回 0，绝不回绕。 */
|
||
static unsigned long long idle_ms_since(unsigned long long t, unsigned long long last)
|
||
{
|
||
return (t >= last) ? (t - last) : 0;
|
||
}
|
||
|
||
/* remove oldest log files until total size <= limit (called at boot) */
|
||
static void log_cleanup_old(void)
|
||
{
|
||
struct dirent *de;
|
||
DIR *d = opendir(LOG_DIR_CARD);
|
||
if (!d) return;
|
||
/* collect meow_*.log with mtime + size */
|
||
struct logfile { char name[64]; long long size; long long mtime; } files[64];
|
||
int n = 0;
|
||
while ((de = readdir(d)) && n < 64) {
|
||
if (strncmp(de->d_name, "meow_", 5)) continue;
|
||
char path[320];
|
||
snprintf(path, sizeof path, "%s/%s", LOG_DIR_CARD, de->d_name);
|
||
struct stat st;
|
||
if (stat(path, &st) || !S_ISREG(st.st_mode)) continue;
|
||
files[n].mtime = (long long)st.st_mtime;
|
||
files[n].size = (long long)st.st_size;
|
||
snprintf(files[n].name, sizeof files[n].name, "%s", de->d_name);
|
||
n++;
|
||
}
|
||
closedir(d);
|
||
long long total = 0;
|
||
for (int i = 0; i < n; i++) total += files[i].size;
|
||
/* simple selection sort by mtime ascending (oldest first) */
|
||
for (int i = 0; i < n; i++)
|
||
for (int j = i + 1; j < n; j++)
|
||
if (files[j].mtime < files[i].mtime) {
|
||
struct logfile t = files[i];
|
||
files[i] = files[j]; files[j] = t;
|
||
}
|
||
int deleted = 0;
|
||
for (int i = 0; i < n && total > (long long)LOG_SIZE_LIMIT; i++) {
|
||
char path[320];
|
||
snprintf(path, sizeof path, "%s/%s", LOG_DIR_CARD, files[i].name);
|
||
if (unlink(path) == 0) { total -= files[i].size; deleted++; }
|
||
}
|
||
if (deleted) fprintf(stderr, "log_cleanup: deleted %d old log(s), total now %lld\n",
|
||
deleted, total);
|
||
}
|
||
|
||
/* try to open the card log file; returns 0 on success */
|
||
static int log_open_card(void)
|
||
{
|
||
if (log_fd >= 0) return 0;
|
||
if (!card_available()) return -1;
|
||
char ts[64];
|
||
boot_timestamp(ts, sizeof ts);
|
||
snprintf(log_dir, sizeof log_dir, "%s", LOG_DIR_CARD);
|
||
snprintf(log_file, sizeof log_file, "%s/%s.log", LOG_DIR_CARD, ts);
|
||
int fd = open(log_file, O_WRONLY | O_APPEND | O_CREAT, 0644);
|
||
if (fd < 0) return -1;
|
||
log_fd = fd;
|
||
return 0;
|
||
}
|
||
|
||
static void logmsg(const char *fmt, ...);
|
||
|
||
/* flush the /tmp boot buffer into the file log (once the card mounts) */
|
||
static void log_poll_card(void)
|
||
{
|
||
if (log_fd >= 0) return;
|
||
if (log_open_card() != 0) return;
|
||
/* move the /tmp boot buffer into the card log, then drop it */
|
||
int fd = open(BOOT_BUF_TMP, O_RDONLY);
|
||
if (fd >= 0) {
|
||
char chunk[1024];
|
||
ssize_t n;
|
||
while ((n = read(fd, chunk, sizeof chunk)) > 0) {
|
||
if (write(log_fd, chunk, n) < 0) { close(fd); log_fd = -1; return; }
|
||
}
|
||
close(fd);
|
||
unlink(BOOT_BUF_TMP);
|
||
logmsg("boot buffer moved into %s", log_file);
|
||
} else {
|
||
logmsg("card log open: %s", log_file);
|
||
}
|
||
}
|
||
|
||
/* bounded append to the /tmp boot buffer (no card log open yet) */
|
||
static void boot_buf_put(const char *line, int len)
|
||
{
|
||
struct stat st;
|
||
if (stat(BOOT_BUF_TMP, &st) == 0 && st.st_size > BOOT_BUF_MAX)
|
||
unlink(BOOT_BUF_TMP); /* roll the buffer (boot-stage only) */
|
||
int fd = open(BOOT_BUF_TMP, O_WRONLY | O_APPEND | O_CREAT, 0644);
|
||
if (fd < 0) return;
|
||
if (write(fd, line, len) < 0) { /* best effort */ }
|
||
close(fd);
|
||
}
|
||
|
||
static void logmsg(const char *fmt, ...)
|
||
{
|
||
char buf[512];
|
||
va_list ap;
|
||
va_start(ap, fmt);
|
||
vsnprintf(buf, sizeof buf, fmt, ap);
|
||
va_end(ap);
|
||
char line[576];
|
||
int l = snprintf(line, sizeof line, "%llu %s\n", now_ms(), buf);
|
||
if (log_fd >= 0) {
|
||
if (write(log_fd, line, l) < 0) log_fd = -1; /* card gone -> buffer */
|
||
}
|
||
if (log_fd < 0) boot_buf_put(line, l);
|
||
fprintf(stderr, "%llu %s\n", now_ms(), buf);
|
||
}
|
||
|
||
/* ================================================================== */
|
||
/* fb0 helpers (RGB565 / RGBA8888 auto) */
|
||
/* ================================================================== */
|
||
/* NOTE: on this device FBIOGET_VSCREENINFO=0x4600, FSCREENINFO=0x4602
|
||
* (device-verified legacy numbers; do NOT swap them). */
|
||
#define FBIOGET_VSCREENINFO 0x4600
|
||
#define FBIOGET_FSCREENINFO 0x4602
|
||
#define FBIOPAN_DISPLAY 0x4606
|
||
#define FBIOBLANK 0x4611
|
||
#define FBIO_WAITFORVSYNC 0x4620
|
||
|
||
static unsigned char *fb; /* 绘制目标指针 = SDK 的 back_buf（A-1/A-2：launcher 与 app 统一渲染栈） */
|
||
static unsigned char *fb_mem = NULL; /* 真实 mmap 帧缓冲（播放器帧备份/恢复源 + app 帧读回 + 双缓冲 yoffset 用） */
|
||
static int fb_xres, fb_yres, fb_line, fb_bpp;
|
||
static int fb_fd = -1;
|
||
static unsigned int fb_yres_virtual = 0; /* virtual height (double-buffer = 2*yres) */
|
||
static unsigned int fb_active_yoffset = 0; /* scanline of the displayed buffer (0 or yres) */
|
||
static int fb_orig_yoffset = -1; /* player's yoffset at menu open (saved) */
|
||
static unsigned char *fb_player_backup = NULL;
|
||
static size_t fb_player_backup_len = 0;
|
||
|
||
/* ---- A-1/A-2：launcher 用 SDK 渲染栈 ----
|
||
* fb 指向 SDK 的 back_buf（meow_ui_back_buf()），所有绘制（put_px/meow_font/dim_screen/
|
||
* draw_menu/statusbar/电源菜单/确认框）画进 SDK 的离屏；呈现统一走 meow_ui_flush()（= SDK present，
|
||
* 内含 vsync + 帧率门控 + 原子 blit 脏区）。launcher 不再自建 back_buf/meow_present/帧率门控。
|
||
* fb_mem 仍保留 launcher 自有的全虚拟 mmap：仅用于播放器帧备份/恢复/双缓冲 yoffset 切换
|
||
* （fb_backup_player/fb_norm_buf0/fb_restore_player/fb_pan_buf0_force）与 app 帧读回
|
||
* （pm_capture_app_frame）——这些是「显示 buffer/页码切换」，与「present 上屏」不同层，不动。 */
|
||
static int back_buf_ok = 0; /* fb 是否指向 SDK back_buf（1=可经 SDK present 上屏） */
|
||
|
||
/* ---- M2.16 按键防抖 + 单击/长按界限 ---- */
|
||
#define KEY_DEBOUNCE_MS 40 /* 键值须稳定此毫秒数才认可（抗 ADC 抖动） */
|
||
#define CLICK_MS 400 /* 按压 <此毫秒 = 单击一次；≥ = 长按（连续） */
|
||
struct kd_state { int raw, stable, down; int longpressed; unsigned long long since, down_at; };
|
||
|
||
/* ---- M2.17 超时自动息屏（display.screen_off_timeout / screen_off_mode）----
|
||
* timeout 单位秒，0=常亮（不自动息屏）；mode：0=panel（面板下电+背光0+FBIOBLANK(4)，挂起触摸
|
||
* 仅电源/任意键唤醒）、1=black（背光0全黑，触摸可唤醒）。见 SYSTEM_SETTINGS.md。 */
|
||
#define SCREEN_OFF_TIMEOUT_DEFAULT 30
|
||
#define SCREEN_OFF_MODE_DEFAULT 0 /* 0=panel, 1=black */
|
||
static int screen_off_timeout = SCREEN_OFF_TIMEOUT_DEFAULT;
|
||
static int screen_off_mode = SCREEN_OFF_MODE_DEFAULT;
|
||
|
||
/* ---- M2.37 电源长按语义缓存（power.longpress_menu_ms / power.forceoff_ms）----
|
||
* 设置页可配；默认 3000/8000 与注释「3s 电源菜单 / 8s 强关」一致。缓存供 run_menu
|
||
* 电源按住判定使用（原为硬编码 2000/8000/3000，现接线读取以让设置生效）。 */
|
||
#define PWR_MENU_MS_DEFAULT 3000
|
||
#define PWR_FORCE_MS_DEFAULT 8000
|
||
static int power_longpress_menu_ms = PWR_MENU_MS_DEFAULT;
|
||
static int power_forceoff_ms = PWR_FORCE_MS_DEFAULT;
|
||
|
||
/* ---- M2.16 刷新率调度配置（display.refresh_rate / refresh_always_max）----
|
||
* A-1/A-2：档位上限/恒满速开关由 launcher 配置（settings.conf），经
|
||
* meow_ui_set_refresh_rate()/meow_ui_set_refresh_always_max() 交给 SDK 的 present
|
||
* 帧率门控/governor 执行（归口 PERF_SCHEDULER 显示刷新率子域）。当前有效档 eff_rate
|
||
* 与帧计数已在 SDK 侧，launcher 不再各自维护一套。 */
|
||
#define REFRESH_RATE_CFG_DEFAULT 60
|
||
static int refresh_rate_cfg = REFRESH_RATE_CFG_DEFAULT; /* 目标档 60/30/15（上限，default 60） */
|
||
static int refresh_always_max = 0; /* 1=恒 max 不降档 */
|
||
|
||
/* M2.16 渲染/防抖前向声明（定义在下方；fb_open 等先引用） */
|
||
static void meow_dirty_full(void);
|
||
static void meow_dirty_add(int x, int y, int w, int h);
|
||
static void meow_dirty_reset(void);
|
||
|
||
static inline void put_px(int x, int y, uint32_t color)
|
||
{
|
||
if (x < 0 || x >= fb_xres || y < 0 || y >= fb_yres) return;
|
||
unsigned char *p = fb + y * fb_line + x * (fb_bpp / 8);
|
||
if (fb_bpp == 16) {
|
||
uint16_t c = ((color >> 8) & 0xF800) | ((color >> 5) & 0x07E0) |
|
||
((color >> 3) & 0x001F);
|
||
*(uint16_t *)p = c;
|
||
} else {
|
||
*(uint32_t *)p = (color << 8) | 0xFF;
|
||
}
|
||
}
|
||
|
||
static void fill_rect(int x0, int y0, int w, int h, uint32_t color)
|
||
{
|
||
for (int y = y0; y < y0 + h; y++)
|
||
for (int x = x0; x < x0 + w; x++)
|
||
put_px(x, y, color);
|
||
}
|
||
|
||
/* 5x7 font (same table as hello.c) */
|
||
static const unsigned char font[][8] = {
|
||
{0x0E,0x11,0x13,0x15,0x19,0x11,0x0E,0x00},
|
||
{0x04,0x0C,0x04,0x04,0x04,0x04,0x0E,0x00},
|
||
{0x0E,0x11,0x01,0x02,0x04,0x08,0x1F,0x00},
|
||
{0x1F,0x02,0x04,0x02,0x01,0x11,0x0E,0x00},
|
||
{0x02,0x06,0x0A,0x12,0x1F,0x02,0x02,0x00},
|
||
{0x1F,0x10,0x1E,0x01,0x01,0x11,0x0E,0x00},
|
||
{0x06,0x08,0x10,0x1E,0x11,0x11,0x0E,0x00},
|
||
{0x1F,0x01,0x02,0x04,0x08,0x08,0x08,0x00},
|
||
{0x0E,0x11,0x11,0x0E,0x11,0x11,0x0E,0x00},
|
||
{0x0E,0x11,0x11,0x0F,0x01,0x02,0x0C,0x00},
|
||
{0x0E,0x11,0x11,0x1F,0x11,0x11,0x11,0x00},
|
||
{0x1E,0x11,0x11,0x1E,0x11,0x11,0x1E,0x00},
|
||
{0x0E,0x11,0x10,0x10,0x10,0x11,0x0E,0x00},
|
||
{0x1C,0x12,0x11,0x11,0x11,0x12,0x1C,0x00},
|
||
{0x1F,0x10,0x10,0x1E,0x10,0x10,0x1F,0x00},
|
||
{0x1F,0x10,0x10,0x1E,0x10,0x10,0x10,0x00},
|
||
{0x0E,0x11,0x10,0x17,0x11,0x11,0x0F,0x00},
|
||
{0x11,0x11,0x11,0x1F,0x11,0x11,0x11,0x00},
|
||
{0x0E,0x04,0x04,0x04,0x04,0x04,0x0E,0x00},
|
||
{0x07,0x02,0x02,0x02,0x02,0x12,0x0C,0x00},
|
||
{0x11,0x12,0x14,0x18,0x14,0x12,0x11,0x00},
|
||
{0x10,0x10,0x10,0x10,0x10,0x10,0x1F,0x00},
|
||
{0x11,0x1B,0x15,0x15,0x11,0x11,0x11,0x00},
|
||
{0x11,0x19,0x15,0x13,0x11,0x11,0x11,0x00},
|
||
{0x0E,0x11,0x11,0x11,0x11,0x11,0x0E,0x00},
|
||
{0x1E,0x11,0x11,0x1E,0x10,0x10,0x10,0x00},
|
||
{0x0E,0x11,0x11,0x11,0x15,0x12,0x0D,0x00},
|
||
{0x1E,0x11,0x11,0x1E,0x14,0x12,0x11,0x00},
|
||
{0x0F,0x10,0x10,0x0E,0x01,0x01,0x1E,0x00},
|
||
{0x1F,0x04,0x04,0x04,0x04,0x04,0x04,0x00},
|
||
{0x11,0x11,0x11,0x11,0x11,0x11,0x0E,0x00},
|
||
{0x11,0x11,0x11,0x11,0x11,0x0A,0x04,0x00},
|
||
{0x11,0x11,0x11,0x15,0x15,0x1B,0x11,0x00},
|
||
{0x11,0x11,0x0A,0x04,0x0A,0x11,0x11,0x00},
|
||
{0x11,0x11,0x11,0x0A,0x04,0x04,0x04,0x00},
|
||
{0x1F,0x01,0x02,0x04,0x08,0x10,0x1F,0x00},
|
||
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
|
||
{0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x00},
|
||
{0x04,0x04,0x04,0x04,0x04,0x00,0x04,0x00},
|
||
{0x00,0x00,0x00,0x1F,0x00,0x00,0x00,0x00},
|
||
{0x00,0x00,0x00,0x1F,0x00,0x00,0x00,0x00},
|
||
};
|
||
|
||
static int glyph_index(char c)
|
||
{
|
||
if (c >= '0' && c <= '9') return c - '0';
|
||
if (c >= 'A' && c <= 'Z') return 10 + (c - 'A');
|
||
if (c >= 'a' && c <= 'z') return 10 + (c - 'a');
|
||
if (c == ' ') return 36;
|
||
if (c == '.') return 37;
|
||
if (c == '!') return 38;
|
||
if (c == '-' || c == '_') return 39;
|
||
return 36;
|
||
}
|
||
|
||
static void draw_glyph(int x, int y, char c, int scale, uint32_t color)
|
||
{
|
||
const unsigned char *g = font[glyph_index(c)];
|
||
for (int row = 0; row < 7; row++) {
|
||
unsigned char bits = g[row];
|
||
for (int col = 0; col < 5; col++) {
|
||
if (bits & (0x10 >> col)) {
|
||
for (int dy = 0; dy < scale; dy++)
|
||
for (int dx = 0; dx < scale; dx++)
|
||
put_px(x + col * scale + dx, y + row * scale + dy, color);
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
static void draw_text(int x, int y, const char *s, int scale, uint32_t color)
|
||
{
|
||
while (*s) {
|
||
draw_glyph(x, y, *s, scale, color);
|
||
x += 6 * scale;
|
||
s++;
|
||
}
|
||
}
|
||
|
||
/* ================================================================== */
|
||
/* M2.6 meow_font 集成（agent-28 字体子系统，font/meow_font.a + libz.a）*/
|
||
/* M2.6 MeowOS 字重结构：字库放 TF 卡 MeowOS/fonts/default/regular/font.png+font.idx
|
||
*（或固件 /usr/share/meowos/font/）；MeowOS 启动 ensure_card_mounted 后再 load，卡晚 */
|
||
/* 挂载时轮询重试。没加载成功时 ui_draw 回退 5x7 点阵（ASCII）。 */
|
||
/* ================================================================== */
|
||
#define UI_FONT_PNG_CARD "/usr/data/mnt/sd_0/MeowOS/fonts/default/regular/font.png"
|
||
#define UI_FONT_IDX_CARD "/usr/data/mnt/sd_0/MeowOS/fonts/default/regular/font.idx"
|
||
#define UI_FONT_PNG_SYS "/usr/share/meowos/font/font.png"
|
||
#define UI_FONT_IDX_SYS "/usr/share/meowos/font/font.idx"
|
||
/* M2.5x 多字体库 + M2.6 字重：字体目录 = <卡根>/MeowOS/fonts/<family>/<weight>/（font.png+font.idx+font.json）。
|
||
* <卡根> 默认 /usr/data/mnt/sd_0（card_present() 判定；--fontscan 可指定宿主根以便单测）。 */
|
||
#define MEOW_FONTS_CFG "MeowOS/fonts"
|
||
#define FONT_PRESETS_MAX 17 /* 1 默认 + ≤16 卡内字体（防爆） */
|
||
/* M2.6 字重结构：卡内字体 = <卡根>/MeowOS/fonts/<family>/<weight>/（三件套）。
|
||
* 每个 preset = 一套 <family>/<weight>（如 misans/regular）。值 = 卡根相对路径
|
||
* MeowOS/fonts/<family>/<weight>/font.png；family/weight 单列供设置页「family→字重」子菜单
|
||
* 分组与 meow_font_effective_paths_tiered 按 family+weight 选库。 */
|
||
static const char *font_presets[FONT_PRESETS_MAX]; /* SC_PRESET 值 = 卡根相对路径 */
|
||
static const char *font_preset_labels[FONT_PRESETS_MAX]; /* SC_PRESET 中文标签（含字重+档位大小标记） */
|
||
/* M2.5x 字体档位：每套的 charset 档（"common"/"gbk"/"full"，取自 font.json，缺省 "common"）
|
||
* 与 glyph_count（信息用）。供档位分层装载（meow_font_effective_paths_tiered）与设置页标注。 */
|
||
static const char *font_preset_tiers[FONT_PRESETS_MAX];
|
||
static int font_preset_glyphs[FONT_PRESETS_MAX];
|
||
static const char *font_preset_fams[FONT_PRESETS_MAX]; /* family slug（目录一级） */
|
||
static const char *font_preset_wts[FONT_PRESETS_MAX]; /* weight slug（目录二级） */
|
||
static const char *font_preset_names[FONT_PRESETS_MAX]; /* font.json name（family 显示名） */
|
||
static char font_preset_val_buf[FONT_PRESETS_MAX][320]; /* 值持久存储（指向上面指针数组） */
|
||
static char font_preset_label_buf[FONT_PRESETS_MAX][96]; /* 标签持久存储（含字重+档位标记） */
|
||
static char font_preset_tier_buf[FONT_PRESETS_MAX][8]; /* charset 持久存储 */
|
||
static char font_preset_fam_buf[FONT_PRESETS_MAX][64]; /* family 持久存储 */
|
||
static char font_preset_wt_buf[FONT_PRESETS_MAX][32]; /* weight 持久存储 */
|
||
static char font_preset_name_buf[FONT_PRESETS_MAX][64]; /* name 持久存储 */
|
||
static int font_presets_n = 0; /* 运行时动态计数（默认=1，仅"默认字体"） */
|
||
static int mfont_ready = 0;
|
||
static int mfont_forced = 0; /* font.file 变更→强制真实(un)load，跳过 SDK 复用捷径 */
|
||
|
||
/* 24-bit RGB → RGB565（与 put_px/meow_font 一致） */
|
||
static uint16_t rgb565(uint32_t c)
|
||
{
|
||
return (uint16_t)(((c >> 8) & 0xF800) | ((c >> 5) & 0x07E0) | ((c >> 3) & 0x001F));
|
||
}
|
||
|
||
/* fb_open 后调用：设置字库绘制目标为当前双缓冲（buffer0 起点 = fb 偏移 0） */
|
||
static void meow_font_bind_fb(void)
|
||
{
|
||
meow_font_set_fb(fb_xres, fb_yres, fb_line);
|
||
}
|
||
|
||
/* 把 font.file 存的「卡根相对/绝对」路径解析为设备绝对路径。
|
||
* 相对路径以 /usr/data/mnt/sd_0/ 为卡根（与 MEOWAPPS 同源）；绝对路径原样。
|
||
* 返回 0 成功，-1 参数无效。 */
|
||
static int meow_font_resolve_path(const char *ref, char *out, int olen)
|
||
{
|
||
if (!ref || !ref[0]) return -1;
|
||
if (ref[0] == '/') { snprintf(out, olen, "%s", ref); return 0; }
|
||
snprintf(out, olen, "/usr/data/mnt/sd_0/%s", ref);
|
||
return 0;
|
||
}
|
||
|
||
/* 前向声明：meow_font_ensure 在下方 font 区中调用（定义在 meow_font_effective_paths_tiered 处）。 */
|
||
static int meow_font_effective_tier(int app_tier);
|
||
static int meow_font_effective_paths_tiered(int tier, char *out_png, int plen,
|
||
char *out_idx, int ilen, char *out_family, int flen);
|
||
|
||
/* 解析 font.file 指向的 png + 派生同目录 idx（font.png → font.idx）。
|
||
* 仅当指向的 png 存在（access R_OK）返回 0；否则 -1（交由回退链）。
|
||
* 返回 0：out_png/out_idx 已填设备绝对路径。 */
|
||
static int meow_font_resolve_selected(char *out_png, int png_len, char *out_idx, int idx_len)
|
||
{
|
||
char ref[MEOW_SET_MAX_LEN];
|
||
if (meow_settings_get_str("font.file", ref, sizeof ref) != 0) return -1;
|
||
if (meow_font_resolve_path(ref, out_png, png_len) != 0) return -1;
|
||
if (access(out_png, R_OK) != 0) return -1; /* 指向不存在 → 回退卡默认/固件 */
|
||
snprintf(out_idx, idx_len, "%s", out_png); /* 同目录 font.idx（标准三件套布局） */
|
||
size_t n = strlen(out_idx);
|
||
if (n > 4 && !strcmp(out_idx + n - 4, ".png")) {
|
||
out_idx[n-4] = '.'; out_idx[n-3] = 'i'; out_idx[n-2] = 'd'; out_idx[n-1] = 'x'; out_idx[n] = 0;
|
||
}
|
||
return 0;
|
||
}
|
||
|
||
/* 尝试加载字库；成功返回 1。优先级（M2.5x，font.load_full 已接入）：
|
||
* 0) 生效档 = font.load_full ? gbk : common（launcher 自身 UI 跟随系统大字库开关）；
|
||
* 1) 生效字体（tier 解析，tier0 即 font.file 所选；相对路径按卡根解析）；
|
||
* 2) 卡 MeowOS/fonts/default/regular/font.png（默认字库）；
|
||
* 3) 固件 /usr/share/meowos/font/font.png。
|
||
* A-1/A-2：SDK meow_ui_init() 已用同一 meow_font.o 加载过（可能成功也可能未成功）。
|
||
* 当字体指向「默认卡字库」或未设置时复用 SDK 已加载状态，避免重复 unload+reload；
|
||
* 当字体指向自定义字库时必须显式 load（SDK 只加载默认，不读 font.file）。
|
||
* mfont_forced=1（font.file/font.load_full 变更触发）时无条件真实 reload，跳过上述捷径。
|
||
* 全失败 → mfont_ready=0，ui_draw 回退 5x7 点阵（系统不死）。 */
|
||
static int meow_font_ensure(void)
|
||
{
|
||
if (mfont_ready && !mfont_forced) return 1;
|
||
mfont_forced = 0;
|
||
|
||
char fpng[400], fidx[400], fam[96];
|
||
int tier = meow_font_effective_tier(MEOW_FONT_TIER_COMMON); /* launcher 自身 UI 跟随 load_full */
|
||
int have_sel = (meow_font_effective_paths_tiered(tier, fpng, sizeof fpng,
|
||
fidx, sizeof fidx, fam, sizeof fam) == 0);
|
||
|
||
/* SDK 已加载且所选字库为「默认卡字库」（或未设置）→ 复用，避免重复解码。 */
|
||
if (meow_gfx_mfont_ready() && (!have_sel || !strcmp(fpng, UI_FONT_PNG_CARD))) {
|
||
mfont_ready = 1;
|
||
logmsg("meow_font: reuse sdk-loaded font");
|
||
return 1;
|
||
}
|
||
|
||
/* 生效字体优先（tier=common 时即 font.file；load_full → 大字库 gbk 档）。 */
|
||
if (have_sel && meow_font_load(fpng, fidx) == 0) {
|
||
mfont_ready = 1;
|
||
logmsg("meow_font: loaded %s (%d/%d sizes), tier=%d", fpng,
|
||
meow_font_has_size(28), meow_font_has_size(20), tier);
|
||
return 1;
|
||
}
|
||
if (have_sel)
|
||
logmsg("meow_font: selected font %s missing, fallback default", fpng); /* 系统日志 */
|
||
/* 卡默认 → 固件。 */
|
||
if (meow_font_load(UI_FONT_PNG_CARD, UI_FONT_IDX_CARD) == 0 ||
|
||
meow_font_load(UI_FONT_PNG_SYS, UI_FONT_IDX_SYS) == 0) {
|
||
mfont_ready = 1;
|
||
logmsg("meow_font: loaded fallback (%d/%d sizes)",
|
||
meow_font_has_size(28), meow_font_has_size(20));
|
||
return 1;
|
||
}
|
||
logmsg("meow_font: all font sources missing, using 5x7 bitmap"); /* WARN：字库不可用 */
|
||
return 0;
|
||
}
|
||
|
||
/* 从 MeowOS/fonts/<family>/<weight>/font.png 绝对路径提 family（第一级目录名）。
|
||
* 如 .../misans/regular/font.png → "misans"、.../default/regular/font.png → "default"；
|
||
* 结构异常/找不到前缀 → 回退 "default"。 */
|
||
static void font_family_from_png(const char *png, char *out, int olen)
|
||
{
|
||
const char *prefix = "/MeowOS/fonts/";
|
||
const char *p = png ? strstr(png, prefix) : NULL;
|
||
if (!p) { snprintf(out, olen, "default"); return; }
|
||
const char *q = p + strlen(prefix);
|
||
const char *slash = strchr(q, '/');
|
||
int n = slash ? (int)(slash - q) : (int)strlen(q);
|
||
if (n <= 0 || n >= olen) { snprintf(out, olen, "default"); return; }
|
||
memcpy(out, q, (size_t)n); out[n] = 0;
|
||
}
|
||
|
||
/* 同路径同时提取 family + weight（两级目录名）。weight 缺省 "regular"。 */
|
||
static void font_family_weight_from_png(const char *png, char *fam, int flen, char *wt, int wlen)
|
||
{
|
||
const char *prefix = "/MeowOS/fonts/";
|
||
const char *p = png ? strstr(png, prefix) : NULL;
|
||
if (!p) { snprintf(fam, flen, "default"); snprintf(wt, wlen, "regular"); return; }
|
||
const char *q = p + strlen(prefix);
|
||
const char *s1 = strchr(q, '/');
|
||
if (!s1) { snprintf(fam, flen, "%s", q); snprintf(wt, wlen, "regular"); return; }
|
||
int nf = (int)(s1 - q);
|
||
if (nf > 0 && nf < flen) { memcpy(fam, q, (size_t)nf); fam[nf] = 0; }
|
||
else snprintf(fam, flen, "default");
|
||
const char *s2 = strchr(s1 + 1, '/');
|
||
int nw = s2 ? (int)(s2 - (s1 + 1)) : (int)strlen(s1 + 1);
|
||
if (nw > 0 && nw < wlen) { memcpy(wt, s1 + 1, (size_t)nw); wt[nw] = 0; }
|
||
else snprintf(wt, wlen, "regular");
|
||
}
|
||
|
||
/* 求「当前生效字体」的 png/idx 绝对路径 + family，供 launch_app 注入 MEOW_FONT_PNG/IDX/APP。
|
||
* 优先级（与 meow_font_ensure 一致）：font.file（resolve_selected）→ 卡默认 MeowOS/fonts/default。
|
||
* family 取自 MeowOS/fonts/<family>/<weight>/font.png 的第一级目录名；无法判定则 "default"。
|
||
* 返回 0 成功（out_png/out_idx/out_family 已填），-1 无卡/无可用字体（调用方跳过注入，
|
||
* SDK 自身会回退卡默认→固件→点阵）。 */
|
||
static int meow_font_effective_paths(char *out_png, int plen, char *out_idx, int ilen,
|
||
char *out_family, int flen)
|
||
{
|
||
char fpng[400], fidx[400];
|
||
if (meow_font_resolve_selected(fpng, sizeof fpng, fidx, sizeof fidx) == 0) {
|
||
snprintf(out_png, plen, "%s", fpng);
|
||
snprintf(out_idx, ilen, "%s", fidx);
|
||
font_family_from_png(fpng, out_family, flen);
|
||
return 0;
|
||
}
|
||
/* 回退卡默认 MeowOS/fonts/default */
|
||
if (access(UI_FONT_PNG_CARD, R_OK) == 0) {
|
||
snprintf(out_png, plen, "%s", UI_FONT_PNG_CARD);
|
||
snprintf(out_idx, ilen, "%s", UI_FONT_IDX_CARD);
|
||
snprintf(out_family, flen, "default");
|
||
return 0;
|
||
}
|
||
return -1;
|
||
}
|
||
|
||
/* 档位 → font.json charset 字符串名（common/gbk/full）。 */
|
||
static const char *font_tier_charset(int tier)
|
||
{
|
||
if (tier >= MEOW_FONT_TIER_FULL) return "full";
|
||
if (tier >= MEOW_FONT_TIER_GBK) return "gbk";
|
||
return "common";
|
||
}
|
||
|
||
/* 生效档：app 声明档（0/1/2，越界 clamp）合并「加载大字库」开关（font.load_full）。
|
||
* 开 → 强制 ≥GBK（gbk≈20k 档大字库）；关（默认）→ 保持 app 声明（缺省 common≈4k）。
|
||
* 断言：0<=返回<=2。 */
|
||
static int meow_font_effective_tier(int app_tier)
|
||
{
|
||
if (app_tier < MEOW_FONT_TIER_COMMON) app_tier = MEOW_FONT_TIER_COMMON;
|
||
if (app_tier > MEOW_FONT_TIER_FULL) app_tier = MEOW_FONT_TIER_FULL;
|
||
int lf = 0;
|
||
if (meow_settings_get_switch("font.load_full", &lf) == 0 && lf)
|
||
if (app_tier < MEOW_FONT_TIER_GBK) app_tier = MEOW_FONT_TIER_GBK;
|
||
return app_tier;
|
||
}
|
||
|
||
/* 【tier 选择入口，M2.5x 已实现】按字体档位取「当前生效字体」png/idx，供 launch_app 注入
|
||
* MEOW_FONT_PNG/IDX/APP（配合 MEOW_FONT_TIER）。口径（MEOWOS_SPEC_REF §5.2/§5.7.8）：
|
||
* - 生效档 = max(app 声明档, font.load_full ? GBK : COMMON)：系统「加载大字库」开 →
|
||
* 强制 ≥gbk；
|
||
* - tier<=common → 走既有 meow_font_effective_paths（font.file/卡默认/固件）；
|
||
* - tier>0 → 在已扫描的 MeowOS/fonts/<family>/<weight>/ 里找 charset 匹配（gbk 请求接受
|
||
* gbk/full；full 请求接受 full）的那套，以其 font.png/idx 绝对路径返回（family = 一级目录名）；
|
||
* - M2.6 字重：优先选「与用户当前 font.file 同 family（其次同 weight）」的大字库，避免
|
||
* 大字库跳到另一家字体；找不到匹配 → 回退 meow_font_effective_paths（避免点到固件小库）。
|
||
* 返回 0 成功（out_png/out_idx/out_family 已填），-1 无可用。 */
|
||
static int meow_font_effective_paths_tiered(int tier, char *out_png, int plen,
|
||
char *out_idx, int ilen, char *out_family, int flen)
|
||
{
|
||
int eff = meow_font_effective_tier(tier); /* 合并 font.load_full：开 → 强制 ≥GBK */
|
||
if (eff <= MEOW_FONT_TIER_COMMON)
|
||
return meow_font_effective_paths(out_png, plen, out_idx, ilen, out_family, flen);
|
||
/* 大字库：从扫描结果选 charset 匹配的一套。
|
||
* 打分（档位主导 ×100）：gbk 请求 → gbk=200 > full=100；full 请求 → full=200 > gbk=100；
|
||
* + 同 family +30（其次同 weight +10，M2.6）仅作同档位内 tie-break：大字库沿用用户所选
|
||
* family，但绝不因「同 family」而把 common 小库越档选成大字库。 */
|
||
const char *want = font_tier_charset(eff);
|
||
char curfam[64] = "", curwt[32] = "";
|
||
{ /* 用户当前 font.file 所选 family/weight（无法判定 → 空，不参与加成） */
|
||
char fpng[400], fidx[400];
|
||
if (meow_font_resolve_selected(fpng, sizeof fpng, fidx, sizeof fidx) == 0)
|
||
font_family_weight_from_png(fpng, curfam, sizeof curfam, curwt, sizeof curwt);
|
||
}
|
||
char ref[320];
|
||
int found = -1, best_score = 0;
|
||
for (int i = 0; i < font_presets_n; i++) {
|
||
const char *cs = font_preset_tiers[i] ? font_preset_tiers[i] : "common";
|
||
/* 档位优先（×100 主导）：gbk 请求 → gbk=200 > full=100；full 请求 → full=200 > gbk=100。
|
||
* M2.6：同 family +30、同 weight +10 仅作同档位内 tie-break（不越档选小库）。 */
|
||
int score = 0;
|
||
if (!strcmp(cs, want)) score = 200;
|
||
else if (!strcmp(cs, "full") || !strcmp(cs, "gbk")) score = 100; /* 降级 */
|
||
if (curfam[0] && font_preset_fams[i] && !strcmp(font_preset_fams[i], curfam)) score += 30;
|
||
if (curfam[0] && curwt[0] && font_preset_wts[i] && !strcmp(font_preset_wts[i], curwt)) score += 10;
|
||
if (score > best_score) { best_score = score; found = i; }
|
||
}
|
||
if (found >= 0)
|
||
snprintf(ref, sizeof ref, "%s", font_presets[found]);
|
||
if (found >= 0) {
|
||
/* 相对路径按卡根解析为设备绝对路径（与 meow_font_effective_paths 同源）。 */
|
||
if (meow_font_resolve_path(ref, out_png, plen) != 0) return -1;
|
||
if (access(out_png, R_OK) != 0) goto fallback;
|
||
snprintf(out_idx, ilen, "%s", out_png);
|
||
size_t n = strlen(out_idx);
|
||
if (n > 4 && !strcmp(out_idx + n - 4, ".png")) {
|
||
out_idx[n-4] = '.'; out_idx[n-3] = 'i'; out_idx[n-2] = 'd';
|
||
out_idx[n-1] = 'x'; out_idx[n] = 0;
|
||
}
|
||
font_family_from_png(out_png, out_family, flen);
|
||
return 0;
|
||
}
|
||
fallback:
|
||
/* 无匹配大字库/不可读 → 回退全局（font.file 所选；其可能是大字库或默认）。 */
|
||
return meow_font_effective_paths(out_png, plen, out_idx, ilen, out_family, flen);
|
||
}
|
||
|
||
/* M2.5x 多字体：从 settings 读 display.multi_font + 6 类 font.class_*，把各自相对路径按卡根
|
||
* 解析为绝对路径，去重装载到 meow_font 槽位（同 family 去重 & ≤4 套上限由
|
||
* meow_font_config_multifont 统一处理）。仅当全局字库已装载（mfont_ready / slot0）时生效；
|
||
* 关或未装载 → 单字体（on=0），零额外开销。调用时机：启动 meow_font_ensure() 之后，以及
|
||
* 设置页变更 display.multi_font / font.class_* / font.file。 */
|
||
static void meow_font_reload_multifont(void)
|
||
{
|
||
static const char *cls_keys[MEOW_FCLS_COUNT] = {
|
||
"font.class_cjk", "font.class_cjk_sym", "font.class_num",
|
||
"font.class_latin", "font.class_latin_sym", "font.class_other" };
|
||
int on = 0;
|
||
meow_settings_get_switch("display.multi_font", &on);
|
||
char gpng[400], gidx[400], gfam[96];
|
||
/* 全局跟生效档（合并 font.load_full → 大字库），与 meow_font_ensure 同源，避免槽0实际装载与
|
||
* 此处理解不一致（多字体去重以全局 png 为基准）。 */
|
||
if (meow_font_effective_paths_tiered(meow_font_effective_tier(MEOW_FONT_TIER_COMMON),
|
||
gpng, sizeof gpng, gidx, sizeof gidx, gfam, sizeof gfam) != 0)
|
||
return; /* 无全局字体：无法多字体 */
|
||
/* 各类候选（静态缓冲保活；config_multifont 同步读取，不持指针） */
|
||
static char cpng[MEOW_FCLS_COUNT][400], cidx[MEOW_FCLS_COUNT][400];
|
||
meow_font_class_cfg cfg[MEOW_FCLS_COUNT];
|
||
memset(cfg, 0, sizeof cfg);
|
||
for (int c = 0; c < MEOW_FCLS_COUNT; c++) {
|
||
char ref[MEOW_SET_MAX_LEN];
|
||
if (meow_settings_get_str(cls_keys[c], ref, sizeof ref) == 0 && ref[0]) {
|
||
char abs[400];
|
||
if (meow_font_resolve_path(ref, abs, sizeof abs) == 0 && access(abs, R_OK) == 0) {
|
||
snprintf(cpng[c], sizeof cpng[c], "%s", abs);
|
||
snprintf(cidx[c], sizeof cidx[c], "%s", abs);
|
||
size_t n = strlen(cidx[c]);
|
||
if (n > 4 && !strcmp(cidx[c] + n - 4, ".png")) {
|
||
cidx[c][n-4]='.'; cidx[c][n-3]='i'; cidx[c][n-2]='d'; cidx[c][n-1]='x'; cidx[c][n]=0;
|
||
}
|
||
cfg[c].png = cpng[c]; cfg[c].idx = cidx[c];
|
||
} else {
|
||
/* M2.58：类别字体配置了但缺失 → 该类别回退全局，并记系统 WARN。 */
|
||
logmsg("multi_font: class %s font %s missing, fallback global", cls_keys[c], ref);
|
||
}
|
||
}
|
||
}
|
||
int distinct = 0, truncated = 0;
|
||
if (meow_font_config_multifont(on, gpng, gidx, cfg, &distinct, &truncated) != 0)
|
||
logmsg("multi_font: config failed -> single-font");
|
||
else if (truncated)
|
||
logmsg("multi_font: WARN >%d 套不同字体（会增内存），已按上限截断", distinct);
|
||
else if (on)
|
||
logmsg("multi_font: enabled, %d distinct fonts (global=%s)", distinct, gfam);
|
||
}
|
||
|
||
/* 统一文本绘制：字库就绪用 meow_font(真字体/中文)，否则回退 5x7 点阵。
|
||
* size 为字库字号（28=状态栏/大标题，20=正文/按钮）；回退时按 scale 近似。 */
|
||
static void ui_draw(int x, int y, const char *s, uint32_t color, int size)
|
||
{
|
||
if (mfont_ready) {
|
||
meow_font_drawtext((uint16_t *)fb, x, y, s, rgb565(color), size);
|
||
} else {
|
||
draw_text(x, y, s, (size >= 16) ? 2 : 1, color);
|
||
}
|
||
}
|
||
|
||
/* 文本宽度（字库 or 回退估算），用于右对齐/居中 */
|
||
static int ui_width(const char *s, int size)
|
||
{
|
||
if (mfont_ready) return meow_font_width_text(s, size);
|
||
return (int)strlen(s) * 6 * ((size >= 16) ? 2 : 1);
|
||
}
|
||
|
||
/* 文本高度（字库行高 or 回退 7×scale 估算），用于垂直居中 / 行高预算。 */
|
||
static int ui_text_height(int size)
|
||
{
|
||
if (mfont_ready) return meow_font_line_height(size);
|
||
return 7 * ((size >= 16) ? 2 : 1);
|
||
}
|
||
|
||
static int fb_open(void)
|
||
{
|
||
int fd = open(FB_DEV, O_RDWR);
|
||
if (fd < 0) { logmsg("fb open failed: %s", strerror(errno)); return -1; }
|
||
unsigned char vinfo[160], finfo[68];
|
||
memset(vinfo, 0, sizeof vinfo);
|
||
memset(finfo, 0, sizeof finfo);
|
||
if (ioctl(fd, FBIOGET_VSCREENINFO, vinfo) < 0 ||
|
||
ioctl(fd, FBIOGET_FSCREENINFO, finfo) < 0) {
|
||
logmsg("fb ioctl failed"); close(fd); return -1;
|
||
}
|
||
fb_xres = *(uint32_t *)(vinfo + 0);
|
||
fb_yres = *(uint32_t *)(vinfo + 4);
|
||
fb_yres_virtual = *(uint32_t *)(vinfo + 12);
|
||
fb_active_yoffset = *(uint32_t *)(vinfo + 20);
|
||
fb_bpp = *(uint32_t *)(vinfo + 24);
|
||
fb_line = *(uint32_t *)(finfo + 44);
|
||
if (!fb_line) fb_line = fb_xres * (fb_bpp / 8);
|
||
/* v6.6: fb0 is DOUBLE-BUFFERED (verified yres_virtual=1440=2*720,
|
||
* smem_len=2 frames, ypanstep=1). The displayed buffer is selected by
|
||
* yoffset (FBIOPAN_DISPLAY 0x4606 verified to flip it). Map the FULL
|
||
* virtual framebuffer so we can read/write both buffers for the
|
||
* backup/restore below; mmapping only one frame would let the menu
|
||
* land on the buffer the panel is NOT showing. */
|
||
if (fb_yres_virtual < fb_yres) fb_yres_virtual = fb_yres; /* single buffer */
|
||
fb_mem = mmap(NULL, (size_t)fb_line * fb_yres_virtual,
|
||
PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
|
||
if (fb_mem == MAP_FAILED) {
|
||
logmsg("fb mmap failed: %s (xres=%d yres=%d bpp=%d line=%d size=%d)",
|
||
strerror(errno), fb_xres, fb_yres, fb_bpp, fb_line,
|
||
fb_line * fb_yres_virtual);
|
||
close(fd);
|
||
return -1;
|
||
}
|
||
fb_fd = fd;
|
||
/* A-1/A-2：launcher 用 SDK 渲染栈 —— fb 指向 SDK 的 back_buf（统一离屏），present 统一走
|
||
* meow_ui_flush()（SDK present：vsync + 帧率门控 + 原子 blit 脏区）。不再自建 back_buf。
|
||
* fb_mem（本函数 mmap 的全虚拟 fb）仅保留给播放器帧备份/恢复 + yoffset 切换 + app 帧读回。 */
|
||
fb = meow_ui_back_buf();
|
||
if (fb) {
|
||
back_buf_ok = 1;
|
||
meow_dirty_full();
|
||
logmsg("fb: %dx%d bpp=%d line=%d vres=%u yoffset=%u (A-1/A-2 SDK back_buf, meow_ui_flush)",
|
||
fb_xres, fb_yres, fb_bpp, fb_line, fb_yres_virtual, fb_active_yoffset);
|
||
} else {
|
||
fb = fb_mem; back_buf_ok = 0;
|
||
logmsg("fb: no SDK back_buf -> direct fb write (present disabled)");
|
||
}
|
||
/* NOTE: the panel is NOT unblanked here anymore — the player may still
|
||
* be running at this point (stop_player() comes after fb_open) and its
|
||
* screen-off state machine would re-blank the panel behind the menu.
|
||
* unblank_panel() runs after stop_player() (v6.2 hotfix) so the frozen
|
||
* player cannot re-blank and the menu stays visible. */
|
||
return fd;
|
||
}
|
||
|
||
/* ---- double-buffer handling (v6.6) --------------------------------
|
||
* fb0 is double-buffered and the DISPLAYED buffer is chosen by fb_var's
|
||
* yoffset (FBIOPAN_DISPLAY flips it). The player page-flips via yoffset (its
|
||
* power/screen-off redraw leaves yoffset on the back buffer), so the menu
|
||
* MUST be drawn to the buffer the panel actually shows — otherwise the menu
|
||
* is invisible and the screen freezes on the player's last frame (the v6.5
|
||
* bug). Strategy: snapshot the player's displayed frame into a heap backup,
|
||
* pan the display to buffer0 (what the launcher and all apps draw to — apps
|
||
* like hello.c mmap exactly one frame at offset 0 and never pan), draw the
|
||
* menu/app-list to buffer0, and on session end copy the backup back to the
|
||
* player's buffer and pan to the original yoffset so a SIGSTOPped player that
|
||
* does NOT redraw (event-driven, ANALYSIS §18.15) still shows its own frame. */
|
||
|
||
/* Snapshot the player's currently-displayed frame into a heap backup. */
|
||
static void fb_backup_player(void)
|
||
{
|
||
if (fb_yres_virtual <= fb_yres) { fb_orig_yoffset = -1; return; } /* single buffer */
|
||
if (fb_active_yoffset >= fb_yres_virtual) fb_active_yoffset = 0;
|
||
fb_orig_yoffset = (int)fb_active_yoffset;
|
||
fb_player_backup_len = (size_t)fb_line * fb_yres;
|
||
fb_player_backup = malloc(fb_player_backup_len);
|
||
if (!fb_player_backup) {
|
||
logmsg("fb backup malloc failed (len=%zu)", fb_player_backup_len);
|
||
fb_orig_yoffset = -1;
|
||
fb_player_backup_len = 0;
|
||
return;
|
||
}
|
||
memcpy(fb_player_backup, fb_mem + (size_t)fb_active_yoffset * fb_line,
|
||
fb_player_backup_len);
|
||
logmsg("fb backup: player frame @ yoffset=%u (buffer %u) -> heap",
|
||
fb_active_yoffset,
|
||
fb_yres ? fb_active_yoffset / fb_yres : 0);
|
||
}
|
||
|
||
/* Pan the display to buffer0 (yoffset=0). buffer0 is what this launcher and
|
||
* every app draw to (apps mmap one frame at offset 0 and never pan), so the
|
||
* panel must show buffer0 for the menu and apps to be visible. */
|
||
static void fb_norm_buf0(void)
|
||
{
|
||
if (fb_fd < 0 || fb_yres_virtual <= fb_yres) { fb_active_yoffset = 0; return; }
|
||
if (fb_active_yoffset == 0) return; /* already showing buffer0 */
|
||
unsigned char v[160];
|
||
memset(v, 0, sizeof v);
|
||
if (ioctl(fb_fd, FBIOGET_VSCREENINFO, v) < 0) return;
|
||
*(uint32_t *)(v + 16) = 0; /* xoffset */
|
||
*(uint32_t *)(v + 20) = 0; /* yoffset -> buffer0 */
|
||
ioctl(fb_fd, FBIOPAN_DISPLAY, v);
|
||
fb_active_yoffset = 0;
|
||
logmsg("fb pan -> buffer0 (yoffset=0)");
|
||
}
|
||
|
||
/* M2.8 Bug 3-residual 根因：fb_norm_buf0 在缓存 fb_active_yoffset==0 时短路提前返回、
|
||
* 不再重发 FBIOPAN_DISPLAY。但 FBIOBLANK(4) 下电 -> FBIOBLANK(0) 上电后，LCDC 的扫描
|
||
* 地址可能已复位到非 buffer0 / 失效位置，而缓存仍是 0 —— 于是真正的 re-pan 从未发出，
|
||
* 唤醒后仍是黑屏/旧帧。本函数无条件重发 pan 到 buffer0（同 yoffset 的重复 pan 是硬件
|
||
* no-op，无频闪），供唤醒/重绘路径调用，确保重画的界面一定落在被显示的缓冲。 */
|
||
static void fb_pan_buf0_force(void)
|
||
{
|
||
if (fb_fd < 0 || fb_yres_virtual <= fb_yres) { fb_active_yoffset = 0; return; }
|
||
unsigned char v[160];
|
||
memset(v, 0, sizeof v);
|
||
if (ioctl(fb_fd, FBIOGET_VSCREENINFO, v) < 0) return; /* read current vinfo */
|
||
*(uint32_t *)(v + 16) = 0; /* xoffset */
|
||
*(uint32_t *)(v + 20) = 0; /* yoffset -> buffer0 */
|
||
ioctl(fb_fd, FBIOPAN_DISPLAY, v); /* force-issue, even if cached 0 */
|
||
fb_active_yoffset = 0;
|
||
logmsg("fb force-pan -> buffer0 (yoffset=0)");
|
||
}
|
||
|
||
/* Restore the player's frame to its buffer and pan back to the original
|
||
* yoffset. Called at menu/session end (BACK TO PLAYER / SIGTERM) so a frozen
|
||
* player that never redraws shows its own frame again. Idempotent. */
|
||
static void fb_restore_player(void)
|
||
{
|
||
int restore_y = fb_orig_yoffset;
|
||
if (fb_fd >= 0 && restore_y >= 0 && fb_player_backup) {
|
||
memcpy(fb_mem + (size_t)restore_y * fb_line, fb_player_backup,
|
||
fb_player_backup_len);
|
||
unsigned char v[160];
|
||
memset(v, 0, sizeof v);
|
||
if (ioctl(fb_fd, FBIOGET_VSCREENINFO, v) == 0) {
|
||
*(uint32_t *)(v + 16) = 0;
|
||
*(uint32_t *)(v + 20) = (uint32_t)restore_y;
|
||
if (ioctl(fb_fd, FBIOPAN_DISPLAY, v) < 0)
|
||
logmsg("fb restore pan failed: %s", strerror(errno));
|
||
}
|
||
logmsg("fb restore: player frame -> yoffset=%d (buffer %d)",
|
||
restore_y, fb_yres ? restore_y / fb_yres : 0);
|
||
}
|
||
if (fb_player_backup) { free(fb_player_backup); fb_player_backup = NULL; }
|
||
fb_orig_yoffset = -1;
|
||
fb_player_backup_len = 0;
|
||
}
|
||
|
||
/* ================================================================== */
|
||
/* A-1/A-2 渲染桥：launcher 手动脏模型 → SDK 脏追踪，呈现走 meow_ui_flush() */
|
||
/* launcher 的绘制（put_px/fill_rect/meow_font/dim_screen）直接把像素画进 */
|
||
/* SDK 的 back_buf（fb），在此仅把「哪些区域变了」桥进 SDK 的脏追踪； */
|
||
/* present 不再由 launcher 做，统一 meow_ui_flush() = SDK present（内含 */
|
||
/* vsync + 帧率门控 + 原子 blit 脏区）。launcher 不再自带 meow_present/ */
|
||
/* refresh_governor —— 帧率调度已归口 SDK（PERF_SCHEDULER 显示子域）。 */
|
||
/* ================================================================== */
|
||
|
||
/* 标记全屏脏：桥进 SDK 的整帧脏，下次 meow_ui_flush() 整帧 blit。 */
|
||
static void meow_dirty_full(void) { meow_gfx_mark_full(); }
|
||
|
||
/* 清空脏集：SDK present 上屏后自清；launcher 侧无需再清（保留接口兼容）。 */
|
||
static void meow_dirty_reset(void) { }
|
||
|
||
/* 标记一个矩形脏：桥进 SDK 脏追踪（相交合并/超限转全屏由 SDK dirty_add 处理）。 */
|
||
static void meow_dirty_add(int x, int y, int w, int h) { meow_gfx_mark_dirty(x, y, w, h); }
|
||
|
||
/* ---- M2.16 按键防抖：键值须稳定 KEY_DEBOUNCE_MS 才认可，防 ADC 抖动（"点一下跳 5-6 下"）。
|
||
* 返回值：0=无事件；KD_DOWN=稳定按下边沿；KD_UP=稳定松开边沿（下沿后计数）。
|
||
* s->down=稳定按住；s->longpressed=按住已 ≥CLICK_MS（长按）。 */
|
||
enum { KD_NONE = 0, KD_DOWN = 1, KD_UP = 2 };
|
||
static int kd_tick(struct kd_state *s, int raw)
|
||
{
|
||
unsigned long long now = now_ms();
|
||
int ev = KD_NONE;
|
||
if (raw != s->raw) {
|
||
if (s->raw == 0 && raw != 0) { /* 任何跳变都重记稳定窗口（含原始 raw 变化） */ }
|
||
s->raw = raw; s->since = now;
|
||
}
|
||
int want = s->raw;
|
||
if (want != s->stable) {
|
||
if (now - s->since >= KEY_DEBOUNCE_MS) {
|
||
s->stable = want;
|
||
if (s->stable && !s->down) { s->down = 1; s->down_at = now; s->longpressed = 0; ev = KD_DOWN; }
|
||
else if (!s->stable && s->down) { s->down = 0; ev = KD_UP; }
|
||
}
|
||
}
|
||
if (s->down && !s->longpressed && now - s->down_at >= CLICK_MS) s->longpressed = 1;
|
||
return ev;
|
||
}
|
||
|
||
/* Unblank the panel AFTER the player is frozen: with the player SIGSTOPped
|
||
* it can no longer re-blank, so the menu (drawn on fb0) stays visible even
|
||
* when the menu opened while the player's screen timeout had blanked the
|
||
* panel. The blank state still belongs to the player's state machine — on
|
||
* session end restore_backlight() re-blanks when menu_opened_blank, so the
|
||
* player resumes into a consistent (blanked) state. */
|
||
static void unblank_panel(void)
|
||
{
|
||
int fbfd = open(FB_DEV, O_RDWR);
|
||
if (fbfd >= 0) { ioctl(fbfd, FBIOBLANK, 0); close(fbfd); }
|
||
logmsg("panel unblanked (player frozen)");
|
||
}
|
||
|
||
/* Backlight handling (defined below): the menu only brings the panel back
|
||
* when it is actually dark (brightness 0 / panel blanked) and otherwise
|
||
* leaves the player's brightness untouched — the old force_backlight()
|
||
* yanked the brightness to 101 on every menu open (Bug A). */
|
||
static int read_brightness(void);
|
||
static void write_brightness(int val);
|
||
static void ensure_backlight(void);
|
||
|
||
/* ---- MeowOS 面板自持（M2.6：播放器已死，MeowOS 拥有面板/背光，无拔河）----
|
||
* 电源键按时长三分：单击（短按松开）= 息屏/亮屏；3s=电源菜单；8s=强制关机。
|
||
* 息屏 = 亮度0 + FBIOBLANK(4)（面板下电，同时挂起 goodix 触摸，无误触）；
|
||
* 亮屏 = FBIOBLANK(0) + 恢复亮度。 */
|
||
static int meow_screen_on = 1;
|
||
static int meow_saved_brightness = 60;
|
||
static int meow_auto_slept = 0; /* M2.17：当前是否「超时自动息屏」置位（手动电源息屏不置位） */
|
||
static void meow_panel_off(void);
|
||
static void meow_panel_on(void);
|
||
static void meow_panel_off(void)
|
||
{
|
||
meow_saved_brightness = read_brightness();
|
||
if (meow_saved_brightness <= 0) meow_saved_brightness = 60;
|
||
write_brightness(0);
|
||
if (screen_off_mode == 0) {
|
||
/* panel：面板下电 + FBIOPBLANK(4)（同时挂起 goodix 触摸，无误触） */
|
||
int f = open(FB_DEV, O_RDWR);
|
||
if (f >= 0) { ioctl(f, FBIOBLANK, 4); close(f); }
|
||
} else {
|
||
/* black：仅背光 0 全黑（面板仍上电，触摸可唤醒） */
|
||
}
|
||
meow_screen_on = 0;
|
||
logmsg("meow panel OFF (mode=%s brightness 0%s)",
|
||
screen_off_mode ? "black" : "panel",
|
||
screen_off_mode ? "" : " + blank 4");
|
||
}
|
||
static void meow_panel_on(void)
|
||
{
|
||
int f = open(FB_DEV, O_RDWR);
|
||
if (f >= 0) { ioctl(f, FBIOBLANK, 0); close(f); }
|
||
write_brightness(meow_saved_brightness > 0 ? meow_saved_brightness : 60);
|
||
meow_screen_on = 1;
|
||
/* M2.8 Bug 3-residual：亮屏必须用 fb_pan_buf0_force 无条件重发 pan。fb_norm_buf0 在
|
||
* 缓存 fb_active_yoffset==0 时提前返回，而 FBIOBLANK(4)->(0) 后 LCDC 扫描地址可能已复位
|
||
* 到非 buffer0 / 失效位置，缓存仍是 0 导致真正的 re-pan 从未发出 —— M2.7 只加 fb_norm_buf0
|
||
* 仍黑屏的原因。主界面都画在 buffer0（mmap 偏移 0），此处强制 re-pan 保证唤醒后落在 buffer0。
|
||
* 当前界面内容的重绘由调用方（run_menu 醒屏分支）经 meow_repaint_surface 完成。 */
|
||
fb_pan_buf0_force();
|
||
logmsg("meow panel ON (blank 0 + brightness %d)", meow_saved_brightness);
|
||
}
|
||
static void meow_toggle_panel(void) { if (meow_screen_on) meow_panel_off(); else meow_panel_on(); }
|
||
|
||
/* ================================================================== */
|
||
/* key state polling (EVIOCGKEY) */
|
||
/* ================================================================== */
|
||
struct keypoll {
|
||
int fd;
|
||
unsigned long cur[KEYBUF_WORDS];
|
||
unsigned long prev[KEYBUF_WORDS];
|
||
int ok;
|
||
};
|
||
|
||
static int kp_open(struct keypoll *kp, const char *dev)
|
||
{
|
||
memset(kp, 0, sizeof *kp);
|
||
kp->fd = open(dev, O_RDONLY | O_NONBLOCK);
|
||
if (kp->fd < 0) { logmsg("open %s: %s", dev, strerror(errno)); return -1; }
|
||
if (ioctl(kp->fd, EVIOCGKEY(sizeof kp->cur), kp->cur) < 0) {
|
||
logmsg("EVIOCGKEY %s: %s", dev, strerror(errno));
|
||
close(kp->fd); return -1;
|
||
}
|
||
memcpy(kp->prev, kp->cur, sizeof kp->cur);
|
||
kp->ok = 1;
|
||
logmsg("keypoll %s ready", dev);
|
||
return 0;
|
||
}
|
||
|
||
/* 关闭 keypoll（设置页/下拉框等自开设备用；幂等，ok=0 时不动） */
|
||
static void kp_close(struct keypoll *kp)
|
||
{
|
||
if (kp->ok && kp->fd >= 0) close(kp->fd);
|
||
kp->ok = 0;
|
||
}
|
||
|
||
/* Poll device key state; call cb(code, is_down) for each edge.
|
||
* Returns 1 if any edge. */
|
||
static int kp_poll(struct keypoll *kp, int (*cb)(int code, int down, void *ctx),
|
||
void *ctx)
|
||
{
|
||
if (!kp->ok) return 0;
|
||
if (ioctl(kp->fd, EVIOCGKEY(sizeof kp->cur), kp->cur) < 0) return 0;
|
||
int changed = 0;
|
||
for (int w = 0; w < KEYBUF_WORDS; w++) {
|
||
if (kp->cur[w] == kp->prev[w]) continue;
|
||
for (int b = 0; b < 32; b++) {
|
||
int c = (kp->cur[w] >> b) & 1;
|
||
int p = (kp->prev[w] >> b) & 1;
|
||
if (c != p) {
|
||
int code = w * 32 + b;
|
||
changed = 1;
|
||
if (cb) cb(code, c, ctx);
|
||
}
|
||
}
|
||
kp->prev[w] = kp->cur[w];
|
||
}
|
||
return changed;
|
||
}
|
||
|
||
static int kp_is_down(const struct keypoll *k, int code)
|
||
{
|
||
return (k->cur[code / 32] >> (code % 32)) & 1;
|
||
}
|
||
|
||
/* ================================================================== */
|
||
/* app scanning (MeowAPPs spec) */
|
||
/* ================================================================== */
|
||
/* 路由行：route.<act>=<chain>。act=route 键后缀（activity_id 的 app 内部分），
|
||
* chain=根屏→目标屏的 activity_id 序列（';' 分隔），链长=逻辑深度。 */
|
||
struct meow_route {
|
||
char act[16]; /* route 键后缀，如 "nowplaying" */
|
||
char chain[MEOW_CHAIN_MAX]; /* 如 "home;search;nowplaying" */
|
||
int keep_awake; /* M2.17：该 activity 常亮（app.json awake.<id>=1 / route.<id>.keep_awake=1） */
|
||
int fullscreen; /* 活动级全屏声名（app.json route.<id>.fullscreen=1；M3 活动切换时消费） */
|
||
};
|
||
|
||
/* 服务行：service.<svc>=mode:restart:max:window_ms（M1 仅解析存储，M4 保活） */
|
||
struct meow_svc {
|
||
char name[16];
|
||
int mode; /* 0=keepalive 1=ondemand（预留） */
|
||
int restart; /* 1=退避重启 */
|
||
int max; /* max_restart 熔断阈值 */
|
||
int window_ms; /* 重启窗口 */
|
||
};
|
||
|
||
struct app {
|
||
char id[MEOW_APP_ID_MAX]; /* M2.52：app_id=app.json 的 package（权威，缺省回退卡上目录名 de->d_name），供 MEOW_LOG_APP 注入 */
|
||
char package[MEOW_APP_ID_MAX]; /* 安卓化：app.json 的 package 字段（反域名权威标识；目录名=package），scan_apps 据此定 app_id */
|
||
char name[17]; /* ASCII display name */
|
||
char exec[129]; /* absolute path */
|
||
int ok; /* exec exists and X_OK */
|
||
/* ---- 阶段 D · M1：app.json 路由/框架/服务/图标（scan_apps 解析）---- */
|
||
char framework; /* '1'=framework=true（看门狗返回发 SIGUSR1） */
|
||
char immersive; /* '1'=immersive=true（隐藏虚拟返回键，返回手势归 SDK） */
|
||
char fullscreen; /* '1'=app.json fullscreen=true（注入 MEOW_FULLSCREEN=1，SDK 预先设全屏） */
|
||
char fonts; /* 字库档：0=默认4K常用 1=大字库GBK 2=Full（app.json "fonts"；注入 MEOW_FONT_TIER） */
|
||
char icon[129]; /* icon= 路径 */
|
||
int nroute; /* route.<id> 行数 */
|
||
struct meow_route routes[MEOW_MAX_ROUTES];
|
||
int nsvc;
|
||
struct meow_svc svcs[MEOW_MAX_SVCS];
|
||
};
|
||
|
||
/* Activity 路由注册表项：app_id 全局唯一的运行时路由层，由 scan_apps（静态 app.json）
|
||
* 与 MSG_ACT_DECLARE/HELLO（运行时）并集填充；单一写者=主循环，无需锁。 */
|
||
struct meow_acct {
|
||
char app_id[MEOW_APP_ID_MAX];
|
||
char name[17];
|
||
char exec[129];
|
||
int ok;
|
||
char framework;
|
||
char icon[129];
|
||
int nroute;
|
||
struct meow_route routes[MEOW_MAX_ROUTES];
|
||
int nsvc;
|
||
struct meow_svc svcs[MEOW_MAX_SVCS];
|
||
int declared; /* 是否经 HELLO/ACT_DECLARE 运行时声明过 */
|
||
};
|
||
|
||
static struct meow_acct g_accts[MEOW_MAX_ACTS]; /* 主循环单写者 */
|
||
static int g_naccts = 0;
|
||
|
||
/* 阶段 D · M0：主循环排空 IPC 队列（定义在下方 IPC 骨架区；run_menu/main 调用） */
|
||
static void meow_ipc_process(void);
|
||
|
||
/* ---- 阶段 D · M1：路由注册表辅助（主循环单写者，无锁）---- */
|
||
static struct meow_acct *meow_acct_find(const char *app_id)
|
||
{
|
||
if (!app_id) return NULL;
|
||
for (int i = 0; i < g_naccts; i++)
|
||
if (!strcmp(g_accts[i].app_id, app_id)) return &g_accts[i];
|
||
return NULL;
|
||
}
|
||
|
||
/* 取（或在末尾新建）app_id 对应的注册表项。返回 NULL 当满。 */
|
||
static struct meow_acct *meow_acct_upsert(const char *app_id)
|
||
{
|
||
if (!app_id || !app_id[0]) return NULL;
|
||
struct meow_acct *a = meow_acct_find(app_id);
|
||
if (a) return a;
|
||
if (g_naccts >= MEOW_MAX_ACTS) { logmsg("act: registry full, drop %s", app_id); return NULL; }
|
||
a = &g_accts[g_naccts++];
|
||
memset(a, 0, sizeof *a);
|
||
strncpy(a->app_id, app_id, MEOW_APP_ID_MAX - 1);
|
||
return a;
|
||
}
|
||
|
||
/* 由 scan_apps 调用：把 app.json 静态路由整体同步进注册表（扫描即权威，替换）。 */
|
||
static void meow_acct_sync(const char *app_id, const struct app *ap)
|
||
{
|
||
if (!ap) return;
|
||
struct meow_acct *a = meow_acct_upsert(app_id);
|
||
if (!a) return;
|
||
a->framework = ap->framework;
|
||
strncpy(a->icon, ap->icon, 128);
|
||
strncpy(a->name, ap->name, 16);
|
||
strncpy(a->exec, ap->exec, 128);
|
||
a->ok = ap->ok;
|
||
a->nroute = ap->nroute > MEOW_MAX_ROUTES ? MEOW_MAX_ROUTES : ap->nroute;
|
||
for (int i = 0; i < a->nroute; i++) a->routes[i] = ap->routes[i];
|
||
a->nsvc = ap->nsvc > MEOW_MAX_SVCS ? MEOW_MAX_SVCS : ap->nsvc;
|
||
for (int i = 0; i < a->nsvc; i++) a->svcs[i] = ap->svcs[i];
|
||
}
|
||
|
||
/* 运行时 HELLO：声明 app 存在（补入注册表），记录声明源。 */
|
||
static void meow_acct_hello(const char *app_id, uint32_t version, uint32_t flags)
|
||
{
|
||
struct meow_acct *a = meow_acct_upsert(app_id);
|
||
if (a) { a->declared = 1; (void)version; (void)flags; }
|
||
logmsg("act: hello app=%s ver=%u flags=%u", app_id, version, flags);
|
||
}
|
||
|
||
/* 运行时 ACT_DECLARE：并集覆盖静态路由。entries=count 个 NUL 结尾 "id=chain" 串。 */
|
||
static void meow_acct_declare(const char *app_id, const char *entries, int count)
|
||
{
|
||
struct meow_acct *a = meow_acct_upsert(app_id);
|
||
if (!a || !entries || count <= 0) return;
|
||
a->declared = 1;
|
||
const char *p = entries;
|
||
for (int k = 0; k < count && *p; k++) {
|
||
const char *eq = strchr(p, '=');
|
||
if (eq && eq > p) {
|
||
int idlen = (int)(eq - p);
|
||
if (idlen >= 16) idlen = 15;
|
||
char id[16];
|
||
memcpy(id, p, idlen); id[idlen] = 0;
|
||
const char *chain = eq + 1;
|
||
int ri = -1;
|
||
for (int i = 0; i < a->nroute; i++)
|
||
if (!strcmp(a->routes[i].act, id)) { ri = i; break; }
|
||
if (ri < 0) {
|
||
if (a->nroute >= MEOW_MAX_ROUTES) { p += strlen(p) + 1; continue; }
|
||
ri = a->nroute++;
|
||
}
|
||
strncpy(a->routes[ri].act, id, 15);
|
||
strncpy(a->routes[ri].chain, chain, MEOW_CHAIN_MAX - 1);
|
||
}
|
||
p += strlen(p) + 1;
|
||
}
|
||
}
|
||
|
||
/* 链路深度 = ';' 分隔段数（根屏→目标屏的逻辑链长）。 */
|
||
static int chain_depth(const char *c)
|
||
{
|
||
if (!c || !*c) return 0;
|
||
int d = 1;
|
||
for (; *c; c++) if (*c == ';') d++;
|
||
return d;
|
||
}
|
||
|
||
/* 解析 activity 链路：填 out_chain（root..target）与 depth。
|
||
* 返回 0=成功；MEOW_ERR_NOENT=app 未注册 / activity 未注册。
|
||
* 规则（FRAMEWORK_DESIGN §2）：route 缺失（app 未声明任何路由）→ chain=activity、深度 1 兜底；
|
||
* 声明了路由但 activity 非 route 键 → MEOW_ERR_NOENT（activity 未注册）。 */
|
||
static int resolve_chain(const char *app_id, const char *activity, char *out, int *depth)
|
||
{
|
||
if (!out || !depth) return MEOW_ERR_INVAL;
|
||
struct meow_acct *a = meow_acct_find(app_id);
|
||
if (!a) return MEOW_ERR_NOENT;
|
||
if (a->nroute == 0) {
|
||
strncpy(out, activity, MEOW_CHAIN_MAX - 1);
|
||
*depth = 1;
|
||
return MEOW_OK;
|
||
}
|
||
for (int i = 0; i < a->nroute; i++) {
|
||
if (!strcmp(a->routes[i].act, activity)) {
|
||
strncpy(out, a->routes[i].chain, MEOW_CHAIN_MAX - 1);
|
||
*depth = chain_depth(a->routes[i].chain);
|
||
return MEOW_OK;
|
||
}
|
||
}
|
||
return MEOW_ERR_NOENT;
|
||
}
|
||
|
||
/* ---- M2.17 keep_awake：前台当前顶层 activity 追踪 ----
|
||
* 前台应用经 IPC MSG_ACT_FOCUS/BACK 上报其当前顶层 activity；fg_keep_awake() 依注册表判断该
|
||
* activity 是否声明 keep_awake（app.json awake.<id>=1 / route.<id>.keep_awake=1；运行时同类）。
|
||
* 主界面（无上报/空）= 非 keep_awake（主页空闲照常超时息屏）。单一写者=主循环（IPC 排空处）。 */
|
||
static char g_fg_app[MEOW_APP_ID_MAX] = "";
|
||
static char g_fg_act[MEOW_ACT_MAX] = "";
|
||
static void meow_fg_act_set(const char *app_id, const char *act)
|
||
{
|
||
if (!app_id) return;
|
||
strncpy(g_fg_app, app_id, MEOW_APP_ID_MAX - 1);
|
||
g_fg_app[MEOW_APP_ID_MAX - 1] = 0;
|
||
if (act) { strncpy(g_fg_act, act, MEOW_ACT_MAX - 1); g_fg_act[MEOW_ACT_MAX - 1] = 0; }
|
||
else g_fg_act[0] = 0;
|
||
logmsg("keep_awake: fg_act app=%s act=%s", g_fg_app, g_fg_act);
|
||
}
|
||
static void meow_fg_act_back(void)
|
||
{
|
||
g_fg_app[0] = 0;
|
||
g_fg_act[0] = 0;
|
||
logmsg("keep_awake: fg_act back to home (cleared)");
|
||
}
|
||
/* 前台当前 activity 是否 keep_awake（无上报/未注册/未声明=0，即照常超时息屏）。 */
|
||
static int fg_keep_awake(void)
|
||
{
|
||
if (!g_fg_app[0] || !g_fg_act[0]) return 0;
|
||
struct meow_acct *a = meow_acct_find(g_fg_app);
|
||
if (!a) return 0;
|
||
for (int i = 0; i < a->nroute; i++)
|
||
if (!strcmp(a->routes[i].act, g_fg_act)) return a->routes[i].keep_awake;
|
||
return 0;
|
||
}
|
||
|
||
/* 标识符字符（含 '.'，用于防止 json_str 误命中更长键的一部分） */
|
||
static int ident_ch(char c)
|
||
{
|
||
return (c >= 'a' && c <= 'z') || (c >= 'A' && c <= 'Z') ||
|
||
(c >= '0' && c <= '9') || c == '_' || c == '.';
|
||
}
|
||
|
||
/* 极简 JSON/扁平值提取：在一行里找 key，读取其值（跳过 ':'/'=' 与可选引号）。
|
||
* 支持 JSON `"name": "Hello"` 与扁平 `framework=true`。返回拷贝到 out 的字符数。
|
||
* 返回 0=未命中/空。 */
|
||
static int json_str(const char *buf, const char *key, char *out, int olen)
|
||
{
|
||
out[0] = 0;
|
||
if (!buf || !key || olen <= 0) return 0;
|
||
const char *p = strstr(buf, key);
|
||
if (!p) return 0;
|
||
if (p > buf && ident_ch((unsigned char)p[-1])) return 0; /* 键前缀需独立 */
|
||
p += strlen(key);
|
||
if (*p == '"') p++; /* JSON 键自身右引号：跳到 ':'/'=' */
|
||
while (*p && (*p == ':' || *p == '=')) p++;
|
||
while (*p == ' ' || *p == '\t') p++;
|
||
if (*p == '"') p++; /* 值左引号（JSON 字符串值） */
|
||
int i = 0;
|
||
while (*p && *p != '"' && *p != ',' && *p != '\n' && *p != '\r' && i < olen - 1)
|
||
out[i++] = *p++;
|
||
out[i] = 0;
|
||
while (i > 0 && (out[i - 1] == ' ' || out[i - 1] == '\t')) out[--i] = 0;
|
||
return i;
|
||
}
|
||
|
||
/* state: 0 ok / 1 no storage card / 2 no usable apps */
|
||
static int card_present(void)
|
||
{
|
||
FILE *f = fopen(MOUNTS, "r");
|
||
if (!f) return 0;
|
||
char line[256];
|
||
int found = 0;
|
||
while (fgets(line, sizeof line, f)) {
|
||
if (strstr(line, " /usr/data/mnt/sd_0 ")) { found = 1; break; }
|
||
}
|
||
fclose(f);
|
||
return found;
|
||
}
|
||
|
||
/* ================================================================== */
|
||
/* MeowOS 系统拔营（M2.2 批次）：TF 卡挂载 + WiFi 联网 */
|
||
/* 官方环境由 hiby_player / sys_server 负责这两件事；MeowOS 作为主系统 */
|
||
/* 时无播放器，必须由 launcher 主动接管。失败不阻塞主界面，后台周期重试。 */
|
||
/* ================================================================== */
|
||
static int sd_mounted(void)
|
||
{
|
||
return card_present();
|
||
}
|
||
|
||
/* TF 卡设备节点是否出现（任一常见节点即视为在卡） */
|
||
static int sd_device_present(void)
|
||
{
|
||
return access("/dev/mmcblk0", F_OK) == 0 || access("/dev/mmcblk0p1", F_OK) == 0;
|
||
}
|
||
|
||
/* 主动挂载 TF 卡到 /usr/data/mnt/sd_0。返回 1=已挂载，0=尚未（调用方轮询重试）。
|
||
* 依次尝试 /dev/mmcblk0、/dev/mmcblk0p1，先 -t exfat 再自动探测；卡未插入返回 0。 */
|
||
static int ensure_card_mounted(void)
|
||
{
|
||
if (sd_mounted()) return 1;
|
||
if (!sd_device_present()) return 0;
|
||
const char *nodes[2] = { "/dev/mmcblk0", "/dev/mmcblk0p1" };
|
||
for (int i = 0; i < 2; i++) {
|
||
if (access(nodes[i], F_OK) != 0) continue;
|
||
char cmd[160];
|
||
snprintf(cmd, sizeof cmd, "mkdir -p /usr/data/mnt/sd_0; "
|
||
"PATH=/bin:/sbin:/usr/bin:/usr/sbin mount -t exfat %s /usr/data/mnt/sd_0 2>/dev/null",
|
||
nodes[i]);
|
||
if (system(cmd) == 0 && sd_mounted()) { logmsg("sd_0 mounted: %s", nodes[i]); return 1; }
|
||
snprintf(cmd, sizeof cmd, "mkdir -p /usr/data/mnt/sd_0; "
|
||
"PATH=/bin:/sbin:/usr/bin:/usr/sbin mount %s /usr/data/mnt/sd_0 2>/dev/null",
|
||
nodes[i]);
|
||
if (system(cmd) == 0 && sd_mounted()) { logmsg("sd_0 mounted (auto): %s", nodes[i]); return 1; }
|
||
}
|
||
return 0;
|
||
}
|
||
|
||
/* ================================================================== */
|
||
/* M2.5x 多字体库扫描 + M2.6 字重结构 / preset 动态化 */
|
||
/* 字体目录 = <卡根>/MeowOS/fonts/<family>/<weight>/，每套含三件套： */
|
||
/* font.png（预渲染灰度 PNG，bit depth 4|8）+ font.idx（MFNI v2 索引） */
|
||
/* + font.json（元数据 + 完整性校验）。缺任一件 → 该套不进列表 + 日志。 */
|
||
/* font.json schema（定版）： */
|
||
/* { */
|
||
/* "family": "家族标识(同目录名/family)", // 信息用，不参与校验 */
|
||
/* "name": "下拉显示名", // 缺则回退目录名 */
|
||
/* "weight": "regular", // 字重 slug（缺省 regular） */
|
||
/* "glyph_count": 10000, // 信息用 */
|
||
/* "charset": "common|gbk|full", // 档位（M2.5x，驱动按需加载） */
|
||
/* "size_list": [28,20], // 信息用 */
|
||
/* "bit_depth": 4, // 信息用(4|8) */
|
||
/* "sha256_png": "<64hex>", // font.png 校验 */
|
||
/* "sha256_idx": "<64hex>", // font.idx 校验 */
|
||
/* "source": "...", // 可选：来源 */
|
||
/* "license": "..." // 可选：许可 */
|
||
/* } */
|
||
/* 校验：sha256 不匹配仅 WARN 不硬失败（仍可选）；缺三件套或 font.json */
|
||
/* 解析不出 name → 跳过 + 日志。仅启动/进设置页扫描一次（勿放热路径）。 */
|
||
/* ================================================================== */
|
||
|
||
/* 计算文件 sha256（走 busybox/宿主 sha256sum；输出小写 64hex）。返回 0 成功。 */
|
||
static int font_sha256_file(const char *path, char *out, int olen)
|
||
{
|
||
out[0] = 0;
|
||
/* 单引号转义防 shell 注入（路径含 ' 时安全；转义后超长则截断 → sha256sum 失败走 WARN） */
|
||
char esc[1024]; int j = 0;
|
||
for (const char *p = path; *p && j < (int)sizeof esc - 4; ) {
|
||
if (*p == '\'') { memcpy(esc + j, "'\\''", 4); j += 4; p++; }
|
||
else esc[j++] = *p++;
|
||
}
|
||
esc[j] = 0;
|
||
char cmd[1080];
|
||
snprintf(cmd, sizeof cmd, "sha256sum '%s' 2>/dev/null", esc);
|
||
FILE *f = popen(cmd, "r");
|
||
if (!f) return -1;
|
||
char line[160];
|
||
int ok = -1;
|
||
if (fgets(line, sizeof line, f)) {
|
||
int i = 0, k = 0;
|
||
while (line[i] == ' ' || line[i] == '\t') i++; /* 跳前导空白 */
|
||
while (line[i] && k < 64) {
|
||
char c = line[i++];
|
||
if ((c >= '0' && c <= '9') || (c >= 'a' && c <= 'f') || (c >= 'A' && c <= 'F'))
|
||
out[k++] = c;
|
||
else break;
|
||
}
|
||
out[k] = 0;
|
||
ok = (k == 64) ? 0 : -1;
|
||
}
|
||
pclose(f);
|
||
return ok;
|
||
}
|
||
|
||
/* 比较两个 sha256 十六进制串（大小写不敏感）。均为 64hex 才比对，否则视为不匹配。 */
|
||
static int font_sha_eq(const char *a, const char *b)
|
||
{
|
||
if (!a || !b || strlen(a) < 64 || strlen(b) < 64) return 0;
|
||
for (int i = 0; i < 64; i++) {
|
||
char ca = a[i], cb = b[i];
|
||
if (ca >= 'A' && ca <= 'F') ca += 32;
|
||
if (cb >= 'A' && cb <= 'F') cb += 32;
|
||
if (ca != cb) return 0;
|
||
}
|
||
return 1;
|
||
}
|
||
|
||
/* 解析 font.json：提取 name / sha256_png / sha256_idx / weight（M2.6，缺省 "regular"）。
|
||
* 文件缺失或解析不出则留空（name 空 → 调用方回退目录名；weight 空 → 回退 "regular"）。 */
|
||
static void meow_font_json_probe(const char *json_path, char *name, int nlen,
|
||
char *sha_png, int slen, char *sha_idx, int xlen,
|
||
char *charset, int clen, int *glyph_count,
|
||
char *weight, int wlen)
|
||
{
|
||
name[0] = 0; sha_png[0] = 0; sha_idx[0] = 0;
|
||
if (charset) charset[0] = 0;
|
||
if (glyph_count) *glyph_count = 0;
|
||
if (weight) weight[0] = 0;
|
||
FILE *f = fopen(json_path, "r");
|
||
if (!f) return;
|
||
char buf[256];
|
||
while (fgets(buf, sizeof buf, f)) {
|
||
if (!name[0]) json_str(buf, "name", name, nlen);
|
||
if (!sha_png[0]) json_str(buf, "sha256_png", sha_png, slen);
|
||
if (!sha_idx[0]) json_str(buf, "sha256_idx", sha_idx, xlen);
|
||
/* M2.5x 字体档位：charset（common|gbk|full）+ glyph_count（信息用，驱动档位分层/标注）。 */
|
||
if (charset && !charset[0]) {
|
||
char v[8] = "";
|
||
if (json_str(buf, "charset", v, sizeof v) > 0 && v[0])
|
||
snprintf(charset, clen, "%s", v);
|
||
}
|
||
if (glyph_count && *glyph_count == 0) {
|
||
char v[16] = "";
|
||
if (json_str(buf, "glyph_count", v, sizeof v) > 0 && v[0])
|
||
*glyph_count = atoi(v);
|
||
}
|
||
/* M2.6 字重：weight（regular|bold|italic|…），缺省 "regular"。 */
|
||
if (weight && !weight[0]) {
|
||
char v[32] = "";
|
||
if (json_str(buf, "weight", v, sizeof v) > 0 && v[0])
|
||
snprintf(weight, wlen, "%s", v);
|
||
}
|
||
}
|
||
fclose(f);
|
||
}
|
||
|
||
/* 字重 slug → 显示名（首字母大写、连字符/下划线转空格：regular→Regular、bold→Bold、italic→Italic）。 */
|
||
static void font_weight_display(const char *weight, char *out, int olen)
|
||
{
|
||
const char *w = (weight && weight[0]) ? weight : "regular";
|
||
out[0] = 0;
|
||
int o = 0, cap = 1;
|
||
for (const char *p = w; *p && o < olen - 1; p++) {
|
||
char c = *p;
|
||
if (c == '_' || c == '-') { if (o < olen - 1) out[o++] = ' '; cap = 1; continue; }
|
||
out[o++] = cap ? (char)((c >= 'a' && c <= 'z') ? c - 32 : c) : c;
|
||
cap = 0;
|
||
}
|
||
out[o] = 0;
|
||
}
|
||
|
||
/* 档位大小标记（设置页字体选项标注）：common≈4k / gbk≈20k / full。
|
||
* 由 font.json 的 charset + glyph_count 派生；缺 charset 回退 common。 */
|
||
static void font_tier_marker(const char *charset, int glyph_count, char *out, int olen)
|
||
{
|
||
const char *tier = (charset && charset[0]) ? charset : "common";
|
||
if (!strcmp(tier, "full")) { snprintf(out, olen, "full"); return; }
|
||
if (glyph_count > 0)
|
||
snprintf(out, olen, "%s≈%dk", tier, (glyph_count + 500) / 1000);
|
||
else
|
||
snprintf(out, olen, "%s", tier);
|
||
}
|
||
|
||
/* 探测一个 <卡根>/MeowOS/fonts/<family>/<weight> 套件是否合法：三件套齐全 → 解析 label+档位+字重。
|
||
* 返回 1=进列表，0=跳过（缺组件/json 不可读）。sha 失败仅 WARN。
|
||
* 输出：label=显示名 `<name> <Weight>（common≈4k）`（如 `MiSans Regular（common≈4k）`）；
|
||
* charset/glyph_count=档位信息；wtout=weight slug（缺省 "regular"）。 */
|
||
static int meow_font_probe_weight(const char *dirpath, const char *family, const char *weight,
|
||
char *label, int llen,
|
||
char *charset, int clen, int *glyph_count,
|
||
char *wtout, int wtlen, char *nameout, int namelen)
|
||
{
|
||
char ppath[400], ipath[400], jpath[400];
|
||
snprintf(ppath, sizeof ppath, "%s/font.png", dirpath);
|
||
snprintf(ipath, sizeof ipath, "%s/font.idx", dirpath);
|
||
snprintf(jpath, sizeof jpath, "%s/font.json", dirpath);
|
||
if (access(ppath, R_OK) != 0 || access(ipath, R_OK) != 0 || access(jpath, R_OK) != 0) {
|
||
logmsg("fonts: skip '%s/%s' (缺 font.png/font.idx/font.json)", family, weight);
|
||
return 0;
|
||
}
|
||
char name[64] = "", jsha_png[80] = "", jsha_idx[80] = "";
|
||
char cs[8] = ""; int gc = 0; char wts[32] = "";
|
||
meow_font_json_probe(jpath, name, sizeof name, jsha_png, sizeof jsha_png,
|
||
jsha_idx, sizeof jsha_idx, cs, sizeof cs, &gc, wts, sizeof wts);
|
||
const char *wt = wts[0] ? wts : (weight ? weight : "regular");
|
||
if (wtout) snprintf(wtout, wtlen, "%s", wt);
|
||
if (nameout) snprintf(nameout, namelen, "%s", name[0] ? name : family);
|
||
/* 显示名 = `<name> <Weight>（common≈4k）`（字重缺省 Regular） */
|
||
char wd[24]; font_weight_display(wt, wd, sizeof wd);
|
||
char marker[24];
|
||
font_tier_marker(cs, gc, marker, sizeof marker);
|
||
snprintf(label, llen, "%s %s（%s）", name[0] ? name : family, wd, marker);
|
||
if (charset) snprintf(charset, clen, "%s", cs[0] ? cs : "common");
|
||
if (glyph_count) *glyph_count = gc;
|
||
/* 完整性校验：仅 WARN，不硬失败；该套仍标记可选。 */
|
||
char apng[80] = "", aidx[80] = "";
|
||
if (font_sha256_file(ppath, apng, sizeof apng) != 0)
|
||
logmsg("fonts: '%s/%s' sha256(png) 不可用，跳过校验", family, wt);
|
||
else if (jsha_png[0] && !font_sha_eq(apng, jsha_png))
|
||
logmsg("fonts: '%s/%s' WARN sha256_png 不匹配（仍可选）", family, wt);
|
||
if (font_sha256_file(ipath, aidx, sizeof aidx) != 0)
|
||
logmsg("fonts: '%s/%s' sha256(idx) 不可用，跳过校验", family, wt);
|
||
else if (jsha_idx[0] && !font_sha_eq(aidx, jsha_idx))
|
||
logmsg("fonts: '%s/%s' WARN sha256_idx 不匹配（仍可选）", family, wt);
|
||
logmsg("fonts: add '%s/%s' (%s) charset=%s glyph_count=%d", family, wt, label,
|
||
cs[0]?cs:"common", gc);
|
||
return 1;
|
||
}
|
||
|
||
/* M2.58 字体索引：CSV 字段写入（始终双引号包裹，内嵌双引号加倍）。返回写入长度。 */
|
||
static int font_index_csvq(char *dst, int olen, const char *s)
|
||
{
|
||
int o = 0;
|
||
if (olen <= 0) return 0;
|
||
if (o < olen) dst[o++] = '"';
|
||
for (; *s && o < olen - 3; s++) {
|
||
if (*s == '"') dst[o++] = '"';
|
||
if (o < olen - 2) dst[o++] = *s;
|
||
}
|
||
if (o < olen) dst[o++] = '"';
|
||
dst[o] = 0;
|
||
return o;
|
||
}
|
||
|
||
/* 把当前 font_presets* 扫描结果落盘为 <card_root>/MeowOS/config/fonts/index（覆盖）。
|
||
* 每套一条 `"family","weight","path","label","tier",glyph_count`；path=卡根相对 font.png。
|
||
* 目录不存在则 mkdir -p；无卡（mkdir/fopen 失败）→ 静默放弃（仅内存默认项）。
|
||
* 该文件是 SDK meow_font_get_available_count()/enumerate() 的持久数据源（规格 §5.7）。 */
|
||
static void meow_font_write_index(const char *card_root)
|
||
{
|
||
if (!card_root || !card_root[0]) return;
|
||
char t1[360], t2[380], base[400], path[420];
|
||
snprintf(t1, sizeof t1, "%s/MeowOS", card_root);
|
||
snprintf(t2, sizeof t2, "%s/MeowOS/config", card_root);
|
||
snprintf(base, sizeof base, "%s/MeowOS/config/fonts", card_root);
|
||
/* 无卡（card_root 父目录不存在 → ENOENT）→ 静默放弃：仅内存默认项，不刷系统日志。 */
|
||
if (mkdir(t1, 0755) != 0 && errno != EEXIST) {
|
||
if (errno != ENOENT) logmsg("fonts: index mkdir fail %s", t1);
|
||
return;
|
||
}
|
||
if (mkdir(t2, 0755) != 0 && errno != EEXIST) { logmsg("fonts: index mkdir fail %s", t2); return; }
|
||
if (mkdir(base, 0755) != 0 && errno != EEXIST) { logmsg("fonts: index mkdir fail %s", base); return; }
|
||
snprintf(path, sizeof path, "%s/index", base);
|
||
FILE *f = fopen(path, "w");
|
||
if (!f) { logmsg("fonts: index fopen fail %s", path); return; }
|
||
char line[1024];
|
||
for (int i = 0; i < font_presets_n; i++) {
|
||
const char *fam = font_preset_fams[i] ? font_preset_fams[i] : "default";
|
||
const char *wt = font_preset_wts[i] ? font_preset_wts[i] : "regular";
|
||
const char *val = font_presets[i] ? font_presets[i] : "MeowOS/fonts/default/regular/font.png";
|
||
const char *lbl = font_preset_labels[i] ? font_preset_labels[i] : fam;
|
||
const char *tier = font_preset_tiers[i] ? font_preset_tiers[i] : "common";
|
||
int o = 0;
|
||
o = font_index_csvq(line, sizeof line, fam);
|
||
line[o++] = ','; line[o] = 0;
|
||
o += font_index_csvq(line + o, sizeof line - (size_t)o, wt);
|
||
line[o++] = ','; line[o] = 0;
|
||
o += font_index_csvq(line + o, sizeof line - (size_t)o, val);
|
||
line[o++] = ','; line[o] = 0;
|
||
o += font_index_csvq(line + o, sizeof line - (size_t)o, lbl);
|
||
line[o++] = ','; line[o] = 0;
|
||
o += font_index_csvq(line + o, sizeof line - (size_t)o, tier);
|
||
line[o++] = ','; line[o] = 0;
|
||
snprintf(line + o, sizeof line - (size_t)o, "%d\n", font_preset_glyphs[i]);
|
||
fputs(line, f);
|
||
}
|
||
fclose(f);
|
||
logmsg("fonts: index written (%d entries) -> %s", font_presets_n, path);
|
||
}
|
||
|
||
/* 扫描 <card_root>/MeowOS/fonts/ 下两级 <family>/<weight>/，重建字体 preset 列表。
|
||
* 每个 (family,weight) 组合一套（如 misans/regular、misans/bold）；family 级 'default' 由
|
||
* 索引 0（默认字体）单独处理，不进循环，避免重复。上限 FONT_PRESETS_MAX
|
||
* （1 默认 + ≤16 用户字体）。无卡/无目录时仅默认。
|
||
*
|
||
* M2.58 释放语义（规格 §5.7 需求 4「扫→写 index→释放（或按需读 index）」结论）：
|
||
* - 持久来源 = <card_root>/MeowOS/config/fonts/index（扫描后由 meow_font_write_index 落盘）。
|
||
* SDK 只读该文件，从不依赖本内存数组。
|
||
* - font_presets* / *_buf 均为「静态、有界（FONT_PRESETS_MAX=17）、非堆」数组：无内存泄漏，
|
||
* 故无运行期 free；「释放」含义 = 两个扫描点（启动 / 进设置页）重建 + 每套固定上限防膨胀。
|
||
* - 设置字体列表（font.file / font.class_* 下拉、family→字重子菜单）在本视图内显示时用
|
||
* 该数组；离开字体列表视图（run_settings_page 退出）无需显式 free（静态数组），下次
|
||
* 进设置/重扫自动重建。
|
||
* - ⚠️ 未做「启动后即清空数组」：meow_font_effective_paths_tiered（launch_app 大字库档位
|
||
* 选库）与 meow_font_reload_multifont 在运行期持续读 font_presets_n，清空会造成大字库
|
||
* 档位退化（red line「保持档位/多字体行为」）。如需「零驻留」，须把这几个核心路径改为
|
||
* 直接读 index（较大重构，超出本批边界，留待后续）。 */
|
||
static void meow_font_scan_presets_root(const char *card_root)
|
||
{
|
||
font_presets_n = 0;
|
||
font_presets[0] = "MeowOS/fonts/default/regular/font.png"; /* 默认字库 = MeowOS/fonts/default/regular */
|
||
font_preset_labels[0] = font_preset_label_buf[0]; /* 指向缓冲（运行时派生含字重+大小标记） */
|
||
font_preset_fams[0] = font_preset_fam_buf[0];
|
||
font_preset_wts[0] = font_preset_wt_buf[0];
|
||
font_preset_names[0] = font_preset_name_buf[0];
|
||
/* 默认套也读 font.json 档位+字重（存在则跟真实档，缺则 common/regular）；供分层装载/标注。 */
|
||
{
|
||
char jp[400], cs[8] = ""; int gc = 0;
|
||
char nm0[64] = "", sp0[80] = "", si0[80] = "", wt0[32] = "";
|
||
snprintf(jp, sizeof jp, "%s/%s/default/regular/font.json", card_root, MEOW_FONTS_CFG);
|
||
meow_font_json_probe(jp, nm0, sizeof nm0, sp0, sizeof sp0, si0, sizeof si0,
|
||
cs, sizeof cs, &gc, wt0, sizeof wt0);
|
||
char mk[24]; font_tier_marker(cs, gc, mk, sizeof mk);
|
||
char wd[24]; font_weight_display(wt0[0] ? wt0 : "regular", wd, sizeof wd);
|
||
snprintf(font_preset_label_buf[0], sizeof font_preset_label_buf[0], "默认字体 %s（%s）", wd, mk);
|
||
snprintf(font_preset_tier_buf[0], sizeof font_preset_tier_buf[0], "%s", cs[0]?cs:"common");
|
||
snprintf(font_preset_fam_buf[0], sizeof font_preset_fam_buf[0], "default");
|
||
snprintf(font_preset_wt_buf[0], sizeof font_preset_wt_buf[0], "%s", wt0[0]?wt0:"regular");
|
||
snprintf(font_preset_name_buf[0], sizeof font_preset_name_buf[0], "默认字体");
|
||
font_preset_tiers[0] = font_preset_tier_buf[0];
|
||
font_preset_glyphs[0] = gc;
|
||
}
|
||
font_presets_n = 1;
|
||
char root[340];
|
||
snprintf(root, sizeof root, "%s/%s", card_root, MEOW_FONTS_CFG);
|
||
DIR *d = opendir(root);
|
||
if (d) { /* 无卡/无字库目录 → 跳过扫描，仅默认 */
|
||
struct dirent *de;
|
||
while ((de = readdir(d)) && font_presets_n < FONT_PRESETS_MAX) {
|
||
if (de->d_name[0] == '.') continue;
|
||
if (!strcmp(de->d_name, "default")) continue; /* 默认字体由索引 0 单独处理 */
|
||
char fampath[400];
|
||
snprintf(fampath, sizeof fampath, "%s/%s", root, de->d_name);
|
||
DIR *w = opendir(fampath); /* 一级：<family>/ */
|
||
if (!w) continue;
|
||
struct dirent *we;
|
||
while ((we = readdir(w)) && font_presets_n < FONT_PRESETS_MAX) {
|
||
if (we->d_name[0] == '.') continue;
|
||
char dirpath[400], label[96], cs[8] = ""; int gc = 0; char wt[32] = "", nm[64] = "";
|
||
snprintf(dirpath, sizeof dirpath, "%s/%s", fampath, we->d_name);
|
||
if (meow_font_probe_weight(dirpath, de->d_name, we->d_name, label, sizeof label,
|
||
cs, sizeof cs, &gc, wt, sizeof wt, nm, sizeof nm) == 0)
|
||
continue; /* 缺组件/损坏 → 跳过该套 */
|
||
int i = font_presets_n;
|
||
snprintf(font_preset_val_buf[i], sizeof font_preset_val_buf[i],
|
||
"%s/%s/%s/font.png", MEOW_FONTS_CFG, de->d_name, we->d_name);
|
||
snprintf(font_preset_label_buf[i], sizeof font_preset_label_buf[i], "%s", label);
|
||
snprintf(font_preset_tier_buf[i], sizeof font_preset_tier_buf[i], "%s", cs[0]?cs:"common");
|
||
snprintf(font_preset_fam_buf[i], sizeof font_preset_fam_buf[i], "%s", de->d_name);
|
||
snprintf(font_preset_wt_buf[i], sizeof font_preset_wt_buf[i], "%s", wt);
|
||
snprintf(font_preset_name_buf[i], sizeof font_preset_name_buf[i], "%s", nm);
|
||
font_presets[i] = font_preset_val_buf[i];
|
||
font_preset_labels[i] = font_preset_label_buf[i];
|
||
font_preset_tiers[i] = font_preset_tier_buf[i];
|
||
font_preset_fams[i] = font_preset_fam_buf[i];
|
||
font_preset_wts[i] = font_preset_wt_buf[i];
|
||
font_preset_names[i] = font_preset_name_buf[i];
|
||
font_preset_glyphs[i] = gc;
|
||
font_presets_n++;
|
||
}
|
||
closedir(w);
|
||
}
|
||
closedir(d);
|
||
}
|
||
/* M2.58：扫描结果落盘为 <card_root>/MeowOS/config/fonts/index（含默认行 index0），
|
||
* 作为 SDK meow_font_get_available_count()/enumerate() 的持久数据源；无卡时仅默认 1 行，
|
||
* 由 meow_font_write_index 内部 mkdir-fail 静默放弃（此路径不刷屏）。 */
|
||
meow_font_write_index(card_root);
|
||
}
|
||
|
||
/* 设备默认卡根扫描（等价现状：无卡时 opendir 失败 → 仅默认字体）。 */
|
||
static void meow_font_scan_presets(void)
|
||
{
|
||
meow_font_scan_presets_root("/usr/data/mnt/sd_0");
|
||
}
|
||
|
||
/* wlan0 是否已联网（链路 up，与状态栏 WIFI 指示一致） */
|
||
static int wlan_connected(void)
|
||
{
|
||
int fd = open("/sys/class/net/wlan0/operstate", O_RDONLY);
|
||
if (fd < 0) return 0;
|
||
char x[8];
|
||
int n = read(fd, x, sizeof x - 1);
|
||
close(fd);
|
||
if (n <= 0) return 0;
|
||
x[n] = 0;
|
||
return !strncmp(x, "up", 2);
|
||
}
|
||
|
||
/* wlan0 网卡是否 up（管理态 IFF_UP，非载波）：读 /sys/class/net/wlan0/flags（十六进制如 "0x1003"）。
|
||
* M2.48：用于区分「网卡 up 但未关联 AP」（→显示 WiFi 开未连接）与「已关联」（wlan_connected 才是关联态）。
|
||
* 接口不存在返回 0。IFF_UP=0x1。不依赖 read_sys_str（其定义在本函数之后）。 */
|
||
static int wlan_radio_up(void)
|
||
{
|
||
if (access("/sys/class/net/wlan0", F_OK)) return 0;
|
||
int fd = open("/sys/class/net/wlan0/flags", O_RDONLY);
|
||
if (fd < 0) return 0;
|
||
char b[16];
|
||
ssize_t r = read(fd, b, sizeof b - 1);
|
||
close(fd);
|
||
if (r <= 0) return 0;
|
||
b[r] = 0;
|
||
return (int)(strtoul(b, NULL, 16) & 0x1UL);
|
||
}
|
||
|
||
/* 是否有 comm==name 的进程在运行（避免重复拉起 wifi 进程） */
|
||
static int proc_by_comm(const char *target)
|
||
{
|
||
DIR *d = opendir("/proc");
|
||
if (!d) return 0;
|
||
struct dirent *de;
|
||
int found = 0;
|
||
while ((de = readdir(d))) {
|
||
if (de->d_name[0] < '0' || de->d_name[0] > '9') continue;
|
||
char path[64], buf[256];
|
||
snprintf(path, sizeof path, "/proc/%s/comm", de->d_name);
|
||
int fd = open(path, O_RDONLY);
|
||
if (fd < 0) continue;
|
||
ssize_t n = read(fd, buf, sizeof buf - 1);
|
||
close(fd);
|
||
if (n <= 0) continue;
|
||
buf[n] = 0;
|
||
if (!strncmp(buf, target, strlen(target))) { found = 1; break; }
|
||
}
|
||
closedir(d);
|
||
return found;
|
||
}
|
||
|
||
/* 确保联网：wlan0 未 up 且尚无 wpa_supplicant 在跑 → 调用 /usr/bin/wifi_up.sh 连保存网络。
|
||
* 幂等：连上 / 已有 wpa_supplicant 则不动；每轮询重试，不阻塞主界面。
|
||
* M2.39：尊重 network.wifi_enabled —— 用户在设置页关 WiFi（=0）则不自动拉起（否则与
|
||
* 手动关冲突）；取值失败（未 init）保默认 1=允许自动连网。 */
|
||
static void ensure_wifi(void)
|
||
{
|
||
int enabled = 1;
|
||
if (meow_settings_get_bool("network.wifi_enabled", &enabled) == 0 && !enabled) return;
|
||
if (wlan_connected()) return;
|
||
if (proc_by_comm("wpa_supplicant")) return;
|
||
logmsg("wifi not up -> /usr/bin/wifi_up.sh");
|
||
system("PATH=/bin:/sbin:/usr/bin:/usr/sbin /usr/bin/wifi_up.sh");
|
||
}
|
||
|
||
/* 解析一个 app.json 流 → 填充 struct app 的 name/exec/icon/framework/routes/svcs。
|
||
* 极简：不做 JSON 校验，仅匹配 key 与路由/服务扁平行（JSON 或扁平皆可）。
|
||
* 不设 name/exec（由调用方从返回的 app 再复制），成功判定由调用方做。 */
|
||
static void meow_parse_app_json(FILE *f, struct app *a)
|
||
{
|
||
char buf[256];
|
||
char name[17] = "", exec[129] = "", icon[129] = "";
|
||
char package[MEOW_APP_ID_MAX] = "";
|
||
int fram = 0, immersive = 0;
|
||
int fullscreen = 0; /* app.json fullscreen=<true|1>（注入 MEOW_FULLSCREEN env，SDK 预先设全屏） */
|
||
int fonts = 0, fonts_set = 0; /* app.json "fonts":<档>（0=默认4K常用 1=大字库GBK 2=Full；缺省 0） */
|
||
struct app tmp;
|
||
memset(&tmp, 0, sizeof tmp);
|
||
while (fgets(buf, sizeof buf, f)) {
|
||
if (!name[0]) json_str(buf, "name", name, sizeof name);
|
||
if (!exec[0]) json_str(buf, "exec", exec, sizeof exec);
|
||
if (!icon[0]) json_str(buf, "icon", icon, sizeof icon);
|
||
if (!package[0]) json_str(buf, "package", package, sizeof package); /* 安卓化权威 app_id */
|
||
/* route.<id>=<chain>（activity 路由，M1） */
|
||
char *rp = strstr(buf, "route.");
|
||
if (rp && tmp.nroute < MEOW_MAX_ROUTES) {
|
||
rp += 6; /* 跳过 "route." */
|
||
int idl = 0; char id[32] = ""; /* 读满整键（识别 ".fullscreen" 后缀，cap 31） */
|
||
while (*rp && *rp != '"' && *rp != ':' && *rp != '=' && idl < 31)
|
||
id[idl++] = *rp++;
|
||
id[idl] = 0;
|
||
if (idl > 0) {
|
||
char *vp = rp;
|
||
while (*vp && *vp != ':' && *vp != '=') vp++;
|
||
if (*vp == ':' || *vp == '=') vp++;
|
||
while (*vp == ' ' || *vp == '\t') vp++;
|
||
if (*vp == '"') vp++;
|
||
/* route.<id>.fullscreen=<on>：活动级全屏声明（M1 顺带；M3 活动切换时消费）。
|
||
* 命中既有 route.<id> 置 fullscreen；不新建 route（避免 id 被截断误建 "…fulls"）。 */
|
||
if (idl >= 11 && !strcmp(id + idl - 11, ".fullscreen")) {
|
||
id[idl - 11] = 0; /* 去掉 ".fullscreen" 还原 act */
|
||
char v[8] = ""; int k = 0;
|
||
while (*vp && *vp != '"' && *vp != ',' && *vp != '\n' &&
|
||
*vp != '\r' && k < 7) v[k++] = *vp++;
|
||
v[k] = 0;
|
||
int on = (!strcmp(v, "1") || !strcmp(v, "true") || !strcmp(v, "yes"));
|
||
for (int i = 0; i < tmp.nroute; i++)
|
||
if (!strcmp(tmp.routes[i].act, id)) { tmp.routes[i].fullscreen = on; break; }
|
||
} else {
|
||
int vl = 0; char chain[MEOW_CHAIN_MAX] = "";
|
||
while (*vp && *vp != '"' && *vp != ',' && *vp != '\n' &&
|
||
*vp != '\r' && vl < MEOW_CHAIN_MAX - 1)
|
||
chain[vl++] = *vp++;
|
||
chain[vl] = 0;
|
||
while (vl > 0 && (chain[vl - 1] == ' ' || chain[vl - 1] == '\t'))
|
||
chain[--vl] = 0;
|
||
strncpy(tmp.routes[tmp.nroute].act, id, 15);
|
||
tmp.routes[tmp.nroute].act[15] = 0; /* 显式收尾（原依赖 id 读长 ≤15） */
|
||
strncpy(tmp.routes[tmp.nroute].chain, chain, MEOW_CHAIN_MAX - 1);
|
||
tmp.nroute++;
|
||
}
|
||
}
|
||
}
|
||
/* awake.<id>=1（M2.17 keep_awake：该 activity 常亮，超时不自动息屏）。
|
||
* 命中的既有 route.<id> 置 keep_awake；无 route 则新建单 activity 路由。 */
|
||
char *ap = strstr(buf, "awake.");
|
||
if (ap && tmp.nroute < MEOW_MAX_ROUTES) {
|
||
ap += 6; /* 跳过 "awake." */
|
||
int al = 0; char aid[16] = "";
|
||
while (*ap && *ap != '"' && *ap != ':' && *ap != '=' && al < 15)
|
||
aid[al++] = *ap++;
|
||
aid[al] = 0;
|
||
if (al > 0) {
|
||
char *vp = ap;
|
||
while (*vp && *vp != ':' && *vp != '=') vp++;
|
||
if (*vp == ':' || *vp == '=') vp++;
|
||
while (*vp == ' ' || *vp == '\t') vp++;
|
||
if (*vp == '"') vp++;
|
||
int on = atoi(vp);
|
||
int ri = -1;
|
||
for (int i = 0; i < tmp.nroute; i++)
|
||
if (!strcmp(tmp.routes[i].act, aid)) { ri = i; break; }
|
||
if (ri < 0) {
|
||
ri = tmp.nroute++;
|
||
strncpy(tmp.routes[ri].act, aid, 15);
|
||
strncpy(tmp.routes[ri].chain, aid, MEOW_CHAIN_MAX - 1); /* 单 activity 兜底链路 */
|
||
}
|
||
tmp.routes[ri].keep_awake = (on != 0);
|
||
}
|
||
}
|
||
/* framework=true（看门狗返回发 SIGUSR1，M1 解析存储） */
|
||
if (!fram && strstr(buf, "framework")) {
|
||
char v[8] = "";
|
||
if (json_str(buf, "framework", v, sizeof v) > 0) {
|
||
if (!strcmp(v, "true") || !strcmp(v, "1") || !strcmp(v, "yes"))
|
||
fram = 1;
|
||
}
|
||
}
|
||
/* immersive=true（隐藏虚拟返回键、返回手势移交 SDK；写 /tmp/meowapp_state） */
|
||
if (!immersive && strstr(buf, "immersive")) {
|
||
char v[8] = "";
|
||
if (json_str(buf, "immersive", v, sizeof v) > 0) {
|
||
if (!strcmp(v, "true") || !strcmp(v, "1") || !strcmp(v, "yes"))
|
||
immersive = 1;
|
||
}
|
||
}
|
||
/* fullscreen=true（app 级：注入 MEOW_FULLSCREEN=1，SDK 端 meow_ui_init 预先设全屏）。
|
||
* 与 immersive 是两回事：fullscreen 隐藏状态栏/沉浸，immersive 关虚拟返回键。 */
|
||
if (!fullscreen && strstr(buf, "fullscreen")) {
|
||
char v[8] = "";
|
||
if (json_str(buf, "fullscreen", v, sizeof v) > 0) {
|
||
if (!strcmp(v, "true") || !strcmp(v, "1") || !strcmp(v, "yes"))
|
||
fullscreen = 1;
|
||
}
|
||
}
|
||
/* "fonts":<档>（字库档：0=默认4K常用 1=大字库GBK 2=Full；可选，缺省 0）。
|
||
* launcher 注入 MEOW_FONT_TIER；大字库装载由后续 font 代理实现。 */
|
||
if (!fonts_set && strstr(buf, "fonts")) {
|
||
char v[8] = "";
|
||
if (json_str(buf, "fonts", v, sizeof v) > 0) {
|
||
if (!strcmp(v, "common") || !strcmp(v, "0")) fonts = 0;
|
||
else if (!strcmp(v, "gbk") || !strcmp(v, "1")) fonts = 1;
|
||
else if (!strcmp(v, "full") || !strcmp(v, "2")) fonts = 2;
|
||
else fonts = atoi(v); /* 数字兜底（越界收敛到 [0,2]） */
|
||
if (fonts < 0) fonts = 0;
|
||
if (fonts > 2) fonts = 2;
|
||
fonts_set = 1;
|
||
}
|
||
}
|
||
/* service.<svc>=mode:restart:max:window_ms（M1 解析存储，保活 M4） */
|
||
char *sp = strstr(buf, "service.");
|
||
if (sp && tmp.nsvc < MEOW_MAX_SVCS) {
|
||
sp += 8; /* 跳过 "service." */
|
||
int sl = 0; char nm[16] = "";
|
||
while (*sp && *sp != '"' && *sp != ':' && *sp != '=' && sl < 15)
|
||
nm[sl++] = *sp++;
|
||
nm[sl] = 0;
|
||
if (sl > 0) {
|
||
char *vp = sp;
|
||
while (*vp && *vp != ':' && *vp != '=') vp++;
|
||
if (*vp == ':' || *vp == '=') vp++;
|
||
while (*vp == ' ' || *vp == '\t') vp++;
|
||
if (*vp == '"') vp++;
|
||
int m = 0, r = 0, mx = 0, w = 0;
|
||
sscanf(vp, "%d:%d:%d:%d", &m, &r, &mx, &w);
|
||
strncpy(tmp.svcs[tmp.nsvc].name, nm, 15);
|
||
tmp.svcs[tmp.nsvc].mode = m;
|
||
tmp.svcs[tmp.nsvc].restart = r;
|
||
tmp.svcs[tmp.nsvc].max = mx;
|
||
tmp.svcs[tmp.nsvc].window_ms = w;
|
||
tmp.nsvc++;
|
||
}
|
||
}
|
||
}
|
||
strncpy(a->name, name, 16);
|
||
strncpy(a->exec, exec, 128);
|
||
strncpy(a->package, package, sizeof a->package - 1);
|
||
a->framework = fram ? '1' : 0;
|
||
a->immersive = immersive ? '1' : 0;
|
||
a->fullscreen = fullscreen ? '1' : 0; /* 注入 MEOW_FULLSCREEN env */
|
||
a->fonts = (char)(fonts < 0 ? 0 : (fonts > 2 ? 2 : fonts)); /* 注入 MEOW_FONT_TIER env */
|
||
strncpy(a->icon, icon, 128);
|
||
a->nroute = tmp.nroute;
|
||
if (tmp.nroute) memcpy(a->routes, tmp.routes, sizeof(a->routes[0]) * (size_t)tmp.nroute);
|
||
a->nsvc = tmp.nsvc;
|
||
if (tmp.nsvc) memcpy(a->svcs, tmp.svcs, sizeof(a->svcs[0]) * (size_t)tmp.nsvc);
|
||
}
|
||
|
||
static int scan_apps(struct app apps[MAX_APPS])
|
||
{
|
||
memset(apps, 0, sizeof(struct app) * MAX_APPS);
|
||
if (!card_present()) return -1; /* state 1 */
|
||
|
||
DIR *d = opendir(MEOWAPPS);
|
||
if (!d) return -2; /* state 2 */
|
||
int n = 0;
|
||
struct dirent *de;
|
||
while ((de = readdir(d)) && n < MAX_APPS) {
|
||
if (de->d_name[0] == '.') continue;
|
||
char jpath[192];
|
||
snprintf(jpath, sizeof jpath, "%s/%s/app.json", MEOWAPPS, de->d_name);
|
||
FILE *f = fopen(jpath, "r");
|
||
if (!f) continue;
|
||
struct app a0;
|
||
memset(&a0, 0, sizeof a0);
|
||
meow_parse_app_json(f, &a0);
|
||
fclose(f);
|
||
if (!a0.name[0] || !a0.exec[0]) continue; /* corrupt -> skip */
|
||
struct app *a = &apps[n];
|
||
memset(a, 0, sizeof *a);
|
||
memcpy(a, &a0, sizeof a0);
|
||
a->ok = (access(a->exec, X_OK) == 0);
|
||
/* 安卓化：app_id=app.json 的 package（权威），缺省回退目录名 de->d_name；
|
||
* 两者都存在且不同则 WARN（正常情况二者相等）。launch_app 注入 MEOW_LOG_APP 用 */
|
||
const char *aid = a0.package[0] ? a0.package : de->d_name;
|
||
strncpy(a->id, aid, sizeof a->id - 1);
|
||
if (a0.package[0] && strcmp(a0.package, de->d_name) != 0)
|
||
logmsg("WARN: app '%s' package '%s' != dir '%s'", a0.name, a0.package, de->d_name);
|
||
/* M1 路由注册表同步（app_id = a->id，即 package 优先） */
|
||
meow_acct_sync(a->id, a);
|
||
n++;
|
||
}
|
||
closedir(d);
|
||
return n; /* 0 -> state 2 */
|
||
}
|
||
|
||
/* ================================================================== */
|
||
/* hiby_player management */
|
||
/* ================================================================== */
|
||
static int find_hiby_pid(void)
|
||
{
|
||
/* scan /proc/N/exe for /usr/bin/hiby_player */
|
||
DIR *d = opendir("/proc");
|
||
if (!d) return 0;
|
||
struct dirent *de;
|
||
int pid = 0;
|
||
while ((de = readdir(d))) {
|
||
if (de->d_name[0] < '0' || de->d_name[0] > '9') continue;
|
||
char path[64], exe[256];
|
||
snprintf(path, sizeof path, "/proc/%s/exe", de->d_name);
|
||
ssize_t n = readlink(path, exe, sizeof exe - 1);
|
||
if (n <= 0) continue;
|
||
exe[n] = 0;
|
||
if (!strcmp(exe, "/usr/bin/hiby_player")) { pid = atoi(de->d_name); break; }
|
||
}
|
||
closedir(d);
|
||
return pid;
|
||
}
|
||
|
||
/* ---- MeowOS 常驻主界面判定（M2.2 修复批次）----
|
||
* Launcher 被 MeowOS 拉起（bootmenu MeowOS 分支 exec，或热键切 MeowOS 后 exec）时，
|
||
* 播放器已死（find_hiby_pid()==0）。此时 launcher == MeowOS 主界面常驻：必须自绘
|
||
* fb0（画 buffer0 + FBIOPAN yoffset=0），绝不走旧「备份播放器帧/冻结/SIGCONT」路径，
|
||
* 绝不遗留/恢复播放器死帧。仅当存在存活播放器（会话覆盖场景）才保留旧菜单覆盖语义。 */
|
||
static int meow_mode = 0;
|
||
|
||
static int is_meow_mode(void)
|
||
{
|
||
return find_hiby_pid() <= 0;
|
||
}
|
||
|
||
static int player_stopped = 0;
|
||
static int player_pid = 0;
|
||
|
||
static int proc_is_stopped(int pid)
|
||
{
|
||
char path[64], line[512];
|
||
snprintf(path, sizeof path, "/proc/%d/stat", pid);
|
||
int fd = open(path, O_RDONLY);
|
||
if (fd < 0) return 0;
|
||
ssize_t n = read(fd, line, sizeof line - 1);
|
||
close(fd);
|
||
if (n <= 0) return 0;
|
||
line[n] = 0;
|
||
/* comm may contain spaces; find last ')' */
|
||
char *p = strrchr(line, ')');
|
||
if (!p || p + 2 >= line + n) return 0;
|
||
return p[2] == 'T';
|
||
}
|
||
|
||
static int stop_player(void)
|
||
{
|
||
player_pid = find_hiby_pid();
|
||
if (!player_pid) { logmsg("hiby_player not found, menu without stop"); return 0; }
|
||
if (kill(player_pid, SIGSTOP) < 0) {
|
||
logmsg("SIGSTOP %d failed: %s", player_pid, strerror(errno));
|
||
return -1;
|
||
}
|
||
/* wait for state T */
|
||
for (int i = 0; i < 100; i++) {
|
||
if (proc_is_stopped(player_pid)) break;
|
||
usleep(10000);
|
||
}
|
||
player_stopped = proc_is_stopped(player_pid);
|
||
logmsg("hiby_player pid=%d stopped=%d", player_pid, player_stopped);
|
||
return player_stopped ? 0 : -1;
|
||
}
|
||
|
||
static void cont_player(void)
|
||
{
|
||
if (player_stopped && player_pid > 0) {
|
||
kill(player_pid, SIGCONT);
|
||
logmsg("SIGCONT %d", player_pid);
|
||
}
|
||
player_stopped = 0;
|
||
}
|
||
|
||
/* ================================================================== */
|
||
/* menu */
|
||
/* ================================================================== */
|
||
#define ROW_H 52
|
||
#define ROW_TOP 96
|
||
#define EXIT_ROW 640
|
||
#define TOAST_Y 590
|
||
|
||
/* brightness save/restore (defined below, used by run_menu) */
|
||
static int saved_brightness = -1;
|
||
|
||
/* set by run_menu: the player's panel was blanked (screen timeout) when the
|
||
* menu opened. fb_open() unblanks it so the menu is visible; on session end
|
||
* restore_backlight() re-blanks (brightness 0 + FBIOBLANK(4)) to put the
|
||
* physical panel back into the state the player's display state machine
|
||
* assumes — otherwise the player resumes believing the panel is blanked
|
||
* while the panel is actually lit (frozen frame). Blanking is idempotent
|
||
* and matches what the player itself did, so it cannot wedge the player. */
|
||
static int menu_opened_blank = 0;
|
||
|
||
/* ---- config (MeowAPPs/meow.conf): pure black background by default ---- */
|
||
static uint32_t menu_bg = 0x000000;
|
||
|
||
/* Hotkey scheme (v6.5):
|
||
* hotkey=power_voldown (default) — HOLD power, then a single VOL_DOWN tap
|
||
* 60-2500ms after the power-down edge opens the menu. The player sees
|
||
* the power press (its screen-off flow starts; accepted side effect)
|
||
* and the VOL_DOWN tap (volume -1; accepted). Menu open runs the
|
||
* verified unblank + bring-backlight-only-if-dark logic (§18.15).
|
||
* hotkey=seq (legacy) — same key quick-tapped N times
|
||
* (default VOL_UP x3 within seq_gap_ms each). The PREVIOUS key combo
|
||
* was retired (its GPIO never fires on this unit, §18.12) — a multi-tap
|
||
* of ONE key is ADC-friendly and physical-safe.
|
||
* meow.conf keys:
|
||
* hotkey=power_voldown | seq
|
||
* hotkey_seq=volup,volup,volup (same key name repeated = N taps, seq mode)
|
||
* hotkey_seq_gap=600 (ms between taps, total window ~2x gap)
|
||
*/
|
||
#define HOTKEY_MODE_PWRVOL 0
|
||
#define HOTKEY_MODE_SEQ 1
|
||
#define HK_PWRWIN_MIN 60 /* min power-hold time before VOL_DOWN counts */
|
||
/* (2026-08-28: 300->60; 仅留防抖/去抖动, */
|
||
/* natural ~220ms 电源+音量减 实测被 300 拦下) */
|
||
#define HK_PWRWIN_MAX 2500 /* max power-hold window; beyond this no trig */
|
||
static int hotkey_mode = HOTKEY_MODE_PWRVOL;
|
||
#define MAX_SEQ_LEN 6
|
||
static int seq_codes[MAX_SEQ_LEN];
|
||
static int seq_len = 0;
|
||
static int seq_gap_ms = 600;
|
||
|
||
static int key_name_code(const char *n)
|
||
{
|
||
if (!strcmp(n, "volup")) return KEY_VOLUMEUP;
|
||
if (!strcmp(n, "voldown")) return KEY_VOLUMEDOWN;
|
||
if (!strcmp(n, "play")) return KEY_PLAYPAUSE;
|
||
if (!strcmp(n, "next")) return KEY_NEXT;
|
||
if (!strcmp(n, "previous")) return KEY_PREVIOUSSONG;
|
||
if (!strcmp(n, "power")) return KEY_POWER;
|
||
return -1;
|
||
}
|
||
|
||
static void load_config(void)
|
||
{
|
||
menu_bg = 0x000000;
|
||
hotkey_mode = HOTKEY_MODE_PWRVOL; /* default: hold power + VOL_DOWN tap */
|
||
seq_len = 0;
|
||
seq_gap_ms = 600;
|
||
char path[256];
|
||
snprintf(path, sizeof path, "%s/meow.conf", MEOWAPPS);
|
||
FILE *f = fopen(path, "r");
|
||
if (f) {
|
||
char buf[128];
|
||
while (fgets(buf, sizeof buf, f)) {
|
||
if (!strncmp(buf, "bg_color=", 9)) {
|
||
unsigned int v;
|
||
if (sscanf(buf + 9, "%x", &v) == 1) menu_bg = v & 0xFFFFFF;
|
||
} else if (!strncmp(buf, "hotkey=", 7)) {
|
||
char *p = buf + 7;
|
||
while (*p == ' ' || *p == '\t') p++;
|
||
if (!strncmp(p, "seq", 3)) hotkey_mode = HOTKEY_MODE_SEQ;
|
||
else hotkey_mode = HOTKEY_MODE_PWRVOL;
|
||
} else if (!strncmp(buf, "hotkey_seq=", 11)) {
|
||
char *p = buf + 11;
|
||
seq_len = 0;
|
||
/* BUGFIX: the outer loop must consume the EOL — with
|
||
* *p staying at '\n' the empty-name branch never advanced p
|
||
* and the daemon spun forever (found on-device: a hotkey_seq
|
||
* line wedged load_config in a busy loop). */
|
||
while (*p && *p != '\n' && *p != '\r' && seq_len < MAX_SEQ_LEN) {
|
||
char name[16];
|
||
int k = 0;
|
||
while (*p && *p != ',' && *p != '\n' && *p != '\r' && k < 15)
|
||
name[k++] = *p++;
|
||
name[k] = 0;
|
||
if (k >= 15) /* malformed long name: skip to separator/EOL */
|
||
while (*p && *p != ',' && *p != '\n' && *p != '\r') p++;
|
||
if (*p == ',') p++;
|
||
int c = key_name_code(name);
|
||
if (c > 0) seq_codes[seq_len++] = c;
|
||
}
|
||
} else if (!strncmp(buf, "hotkey_seq_gap=", 15)) {
|
||
int g = atoi(buf + 15);
|
||
if (g >= 200 && g <= 2000) seq_gap_ms = g;
|
||
}
|
||
}
|
||
fclose(f);
|
||
}
|
||
if (seq_len == 0) { seq_codes[0] = KEY_VOLUMEUP; seq_len = 3; } /* seq fallback volup x3 */
|
||
if (hotkey_mode == HOTKEY_MODE_PWRVOL)
|
||
logmsg("config: bg_color=%06x hotkey=power_voldown (window %d-%dms)",
|
||
menu_bg, HK_PWRWIN_MIN, HK_PWRWIN_MAX);
|
||
else
|
||
logmsg("config: bg_color=%06x hotkey=seq (%d taps of code %d gap=%dms)",
|
||
menu_bg, seq_len, seq_codes[0], seq_gap_ms);
|
||
}
|
||
|
||
/* ---- volume save/restore ---- */
|
||
/* The player sets volume via ioctl on /dev/snd/controlC0 writing the
|
||
* CS43198 "Left/Right Playback Volume" controls (§11.4). We snapshot the
|
||
* same controls through amixer so a hotkey sequence's volume side effects
|
||
* can be restored silently (the player itself never reads these; next key
|
||
* press it writes its own value again — acceptable). */
|
||
struct vol_snap { int l, r; };
|
||
|
||
static int amixer_vol(int numid)
|
||
{
|
||
char cmd[96];
|
||
snprintf(cmd, sizeof cmd, "amixer -c 0 cget numid=%d 2>/dev/null", numid);
|
||
FILE *p = popen(cmd, "r");
|
||
if (!p) return -1;
|
||
char buf[128];
|
||
int v = -1;
|
||
while (fgets(buf, sizeof buf, p)) {
|
||
/* ": values=N" line — the other "values=1" on the type line is the
|
||
* element's value COUNT, not the actual volume */
|
||
char *s = strstr(buf, ": values=");
|
||
if (s) { v = atoi(s + 9); break; }
|
||
}
|
||
pclose(p);
|
||
return v;
|
||
}
|
||
|
||
static void amixer_set(int numid, int v)
|
||
{
|
||
if (v < 0) return;
|
||
char cmd[96];
|
||
snprintf(cmd, sizeof cmd, "amixer -c 0 cset numid=%d %d >/dev/null 2>&1",
|
||
numid, v);
|
||
system(cmd);
|
||
}
|
||
|
||
static struct vol_snap vol_snapshot(void)
|
||
{
|
||
struct vol_snap s = { amixer_vol(1), amixer_vol(2) };
|
||
return s;
|
||
}
|
||
|
||
static void vol_restore(struct vol_snap s)
|
||
{
|
||
logmsg("volume restore -> L=%d R=%d", s.l, s.r);
|
||
amixer_set(1, s.l);
|
||
amixer_set(2, s.r);
|
||
}
|
||
|
||
static int read_file_int(const char *path)
|
||
{
|
||
int fd = open(path, O_RDONLY);
|
||
if (fd < 0) return -1;
|
||
char buf[16];
|
||
int n = read(fd, buf, sizeof buf - 1);
|
||
close(fd);
|
||
if (n <= 0) return -1;
|
||
buf[n] = 0;
|
||
return atoi(buf);
|
||
}
|
||
|
||
/* ================================================================== */
|
||
/* 系统设置（阶段 B2a 统一后端：settings_volume 等仅作缓存） */
|
||
/* 统一后端（SYSTEM_SETTINGS.md §3/§7）：扁平 key=value 存板载 */
|
||
/* /usr/data/meow/settings.conf（KB 级小文件）。单点数据源，clamp 集 */
|
||
/* 中在本模块。此处的全局变量（settings_volume/screen_off_timeout/ */
|
||
/* refresh_rate_cfg 等）仅作缓存，由 meow_settings 的 set 回调/加载 */
|
||
/* 后同步，供既有大量引用这些变量的代码（DAC/状态栏/息屏/刷新率调度）*/
|
||
/* 使用，零侵入、不破坏编译与功能。 */
|
||
/* ================================================================== */
|
||
#define MEOW_VOL_MAX 100 /* 硬上限 0-100 */
|
||
#define MEOW_VOL_DEFAULT 60 /* 默认音量 */
|
||
#define MEOW_VOL_STEP_DEFAULT 1 /* 默认跳步 1%（线性渐变；可配 audio.volume_step 1-5） */
|
||
#define MEOW_VOL_STEP_MAX 5 /* 跳步上限（SYSTEM_SETTINGS.md：最大 5） */
|
||
#define MEOW_VOL_MAX_DEFAULT 100 /* 默认最大音量上限（尊重上限；可配 audio.volume_max） */
|
||
static int settings_volume = MEOW_VOL_DEFAULT; /* 当前音量 0-100（= 写入 DAC 的映射值） */
|
||
static int settings_volume_max = MEOW_VOL_MAX_DEFAULT; /* 最大音量上限 clamp */
|
||
static int settings_volume_step = MEOW_VOL_STEP_DEFAULT; /* 跳步 */
|
||
|
||
/* M2.17/M2.16：把 meow_settings 当前值同步到本模块的缓存全局。读取方
|
||
* （DAC/状态栏/息屏/刷新率调度）统一从缓存取，避免散读 backend。 */
|
||
static void settings_sync_cache_from_backend(void)
|
||
{
|
||
int v;
|
||
if (meow_settings_get_int("audio.volume", &v) == 0) settings_volume = v;
|
||
if (meow_settings_get_int("audio.volume_max", &v) == 0) settings_volume_max = v;
|
||
if (meow_settings_get_int("audio.volume_step", &v) == 0) settings_volume_step = v;
|
||
if (meow_settings_get_enum("display.refresh_rate", &v) == 0) /* names "60,30,15" */
|
||
refresh_rate_cfg = (v == 1) ? 30 : (v == 2) ? 15 : 60;
|
||
if (meow_settings_get_bool("display.refresh_always_max", &v) == 0) refresh_always_max = v;
|
||
if (meow_settings_get_int("display.screen_off_timeout", &v) == 0) screen_off_timeout = v;
|
||
if (meow_settings_get_enum("display.screen_off_mode", &v) == 0) screen_off_mode = v;
|
||
if (meow_settings_get_int("power.longpress_menu_ms", &v) == 0) power_longpress_menu_ms = v;
|
||
if (meow_settings_get_int("power.forceoff_ms", &v) == 0) power_forceoff_ms = v;
|
||
}
|
||
|
||
/* meow_settings 变更回调：set_*（如音量键）后同步缓存全局，保证既有引用
|
||
* settings_volume 等变量的代码与 backend 单点一致（SYSTEM_SETTINGS §3）。 */
|
||
static void settings_sync_cache_listener(const char *key)
|
||
{
|
||
if (!strcmp(key, "audio.volume")) { int v; if (meow_settings_get_int("audio.volume", &v) == 0) settings_volume = v; }
|
||
else if (!strcmp(key, "audio.volume_max")) { int v; if (meow_settings_get_int("audio.volume_max", &v) == 0) settings_volume_max = v; }
|
||
else if (!strcmp(key, "audio.volume_step")) { int v; if (meow_settings_get_int("audio.volume_step", &v) == 0) settings_volume_step = v; }
|
||
else if (!strcmp(key, "display.refresh_rate")) { int v; if (meow_settings_get_enum("display.refresh_rate", &v) == 0) refresh_rate_cfg = (v == 1) ? 30 : (v == 2) ? 15 : 60; }
|
||
else if (!strcmp(key, "display.refresh_always_max")) { int v; if (meow_settings_get_bool("display.refresh_always_max", &v) == 0) refresh_always_max = v; }
|
||
else if (!strcmp(key, "display.screen_off_timeout")) { int v; if (meow_settings_get_int("display.screen_off_timeout", &v) == 0) screen_off_timeout = v; }
|
||
else if (!strcmp(key, "display.screen_off_mode")) { int v; if (meow_settings_get_enum("display.screen_off_mode", &v) == 0) screen_off_mode = v; }
|
||
else if (!strcmp(key, "power.longpress_menu_ms")) { int v; if (meow_settings_get_int("power.longpress_menu_ms", &v) == 0) power_longpress_menu_ms = v; }
|
||
else if (!strcmp(key, "power.forceoff_ms")) { int v; if (meow_settings_get_int("power.forceoff_ms", &v) == 0) power_forceoff_ms = v; }
|
||
}
|
||
|
||
/* ---- 通知 dump 回调（通知#6 转储 TF 卡；做成真）----
|
||
* meow_notif 在 TTL 到点（meow_notif_tick，§8 10s）调用此回调归档一条通知，随后释放槽。
|
||
* 本回调把 meow_notif 结构体转成一行 CSV 追加写入 <卡>/MeowOS/notifications/notifications.log
|
||
* （含 mkdir -p 与按总大小滚动截断、保留最新 10MB），落盘实现在 meow_notif.c 的
|
||
* meow_notif_dump_tf()。无卡/不可写仅打点降级（NOTIFICATION_SYSTEM.md §5/§8 + MEWSPEC §5.3）。 */
|
||
static void notif_dump_tf_placeholder(const meow_notif_t *n)
|
||
{
|
||
meow_notif_dump_tf(n);
|
||
}
|
||
|
||
/* ---- 通知图标回退回调（用户定案：icon 为空 → 用该 app 默认图标）----
|
||
* post 的 app_icon 为空时调用（meow_notif.c 的 notif_resolve_icon），按 app_id 在 app
|
||
* 注册表（scan_apps 静态 app.json 的 icon）里找该 app 的图标（name/path 或空）。 */
|
||
static int notif_app_icon_fallback(const char *app_id, char *out, size_t outsz)
|
||
{
|
||
if (!app_id || !app_id[0] || !out || outsz == 0) return 0;
|
||
struct meow_acct *a = meow_acct_find(app_id);
|
||
if (a && a->icon[0]) { snprintf(out, outsz, "%s", a->icon); return 1; }
|
||
return 0; /* 无注册/无图标 → 保持空（通知中心 UI 再回退） */
|
||
}
|
||
|
||
/* 启动加载（M2.11/M2.24）：统一由 meow_settings 后端读 settings.conf；
|
||
* 此处仅注册监听（一次性）+ 把 backend 当前值同步到缓存全局。重载（应用期
|
||
* watchdog 可能改音量）等价于 meow_settings_init() + 手动同步。 */
|
||
static int settings_cache_registered = 0; /* M2.24：监听只注册一次 */
|
||
static void settings_load(void)
|
||
{
|
||
meow_settings_init(); /* 幂等：注册默认 + 读 settings.conf */
|
||
meow_notif_init(); /* M2a：通知存储初始化（幂等，读 notify.* 配额） */
|
||
meow_notif_set_dump_cb(notif_dump_tf_placeholder); /* 通知#6：挂 dump 回调 = TF 转储（meow_notif_dump_tf：一行 CSV 追加 + 10MB 滚动截断） */
|
||
meow_notif_set_icon_cb(notif_app_icon_fallback); /* icon 空 → 按 app_id 回退该 app 默认图标（app.json icon） */
|
||
if (!settings_cache_registered) {
|
||
meow_settings_add_listener(settings_sync_cache_listener);
|
||
settings_cache_registered = 1;
|
||
}
|
||
settings_sync_cache_from_backend();
|
||
logmsg("settings: vol=%d(max=%d,step=%d) refresh=%d(always_max=%d) off=%ds mode=%s",
|
||
settings_volume, settings_volume_max, settings_volume_step,
|
||
refresh_rate_cfg, refresh_always_max, screen_off_timeout,
|
||
screen_off_mode ? "black" : "panel");
|
||
}
|
||
|
||
/* ---- MeowOS 真实 DAC 音量（CS43198，ANALYSIS §18.39）----
|
||
* HibyOS 播放器经 ioctl 直写 /dev/snd/controlC0 的 "Left/Right Playback
|
||
* Volume"（numid 1/2，0-255）→ codec 驱动 cs43198_vol_*_put → I2C 直写 CS43198
|
||
* 寄存器（0x9000-0x9002/0x7000-0x7001，双片 L/R）。我们复刻同路径（amixer
|
||
* cset = SNDRV_CTL_IOCTL_ELEM_WRITE），0-100 → 0-255 映射直写两声道。
|
||
* 读回不可用（驱动 get 为 dummy 恒 0；/dev/i2c-3 被驱动占用），故 meow_vol_get()
|
||
* 返回我们写入的跟踪值（= 真实 DAC 映射值）。 */
|
||
static void meow_dac_vol_write(int pct)
|
||
{
|
||
int dac = pct * 255 / 100;
|
||
if (dac < 0) dac = 0;
|
||
if (dac > 255) dac = 255;
|
||
char cmd[160];
|
||
snprintf(cmd, sizeof cmd,
|
||
"amixer -c 0 cset numid=1 %d >/dev/null 2>&1; amixer -c 0 cset numid=2 %d >/dev/null 2>&1",
|
||
dac, dac);
|
||
system(cmd);
|
||
logmsg("DAC vol -> L/R=%d (pct %d)", dac, pct);
|
||
}
|
||
|
||
/* ---- M2.38 音量滑条拖动节流：meow_dac_vol_write 每次 system() fork+exec /bin/sh + 2 个
|
||
* amixer，嵌入式 MIPS 上极慢；滑条拖动逐帧 set → s_commit → system() 导致卡死十几秒。
|
||
* 修法：墙钟节流（两次真实 DAC 写入 ≥ VOL_DRAG_DAC_MS），拖动中只更新缓存 + 刷状态栏，
|
||
* 抬手/结束时经 meow_dac_vol_flush() 无条件直写一次，保证最终音量必然落 DAC。 ---- */
|
||
#define VOL_DRAG_DAC_MS 60 /* 滑条拖动期间两次真实 DAC 写入的最短墙钟间隔 */
|
||
static unsigned long long vol_dac_last_ms = 0;
|
||
|
||
static void meow_dac_vol_write_throttled(void)
|
||
{
|
||
unsigned long long now = now_ms();
|
||
if (now - vol_dac_last_ms < VOL_DRAG_DAC_MS) return; /* 节流窗口内跳过，等抬手统一写 */
|
||
vol_dac_last_ms = now;
|
||
meow_dac_vol_write(settings_volume);
|
||
}
|
||
|
||
/* 抬手/点击提交连 save 时调用：无条件直写一次真实 DAC（绕过节流，保证最终音量落 DAC/落盘）。 */
|
||
static void meow_dac_vol_flush(void)
|
||
{
|
||
vol_dac_last_ms = now_ms();
|
||
meow_dac_vol_write(settings_volume);
|
||
}
|
||
|
||
/* clamp 集中：0..MEOW_VOL_MAX，再 clamp 到上限 settings_volume_max。 */
|
||
static int vol_clamp(int v)
|
||
{
|
||
if (v < 0) v = 0;
|
||
if (v > MEOW_VOL_MAX) v = MEOW_VOL_MAX;
|
||
if (v > settings_volume_max) v = settings_volume_max;
|
||
return v;
|
||
}
|
||
static void settings_volume_set(int v)
|
||
{
|
||
v = vol_clamp(v); /* 0..MEOW_VOL_MAX，再 clamp 到上限 */
|
||
meow_settings_set_int("audio.volume", v); /* clamp 集中在 backend；listener 同步缓存 */
|
||
meow_dac_vol_write(settings_volume); /* 每次变更即直写真实 DAC（CS43198） */
|
||
meow_settings_save(); /* 单点变更即落盘 */
|
||
}
|
||
static int settings_volume_get(void) { return settings_volume; }
|
||
|
||
/* ---- M2.14 线性渐变：step>1 时按 1% 递增爬到目标，避免一次跳 N% 突兀 ----
|
||
* 每主循环 tick 最多迈 1%（VOL_RAMP_MS 墙钟节流，不阻塞主循环）；到目标若
|
||
* 键仍按住则继续延段（长按=连续渐变到松开/到上限）；step=1 时一步即达（天然平滑）。
|
||
* 落盘只在渐变结束时一次（meow_settings_save），不逐 1% 写盘。 */
|
||
#define VOL_RAMP_MS 15 /* 每 1% 步进的最短墙钟间隔 */
|
||
static int vol_ramp_dir = 0; /* +1 上 / -1 下 / 0 停 */
|
||
static int vol_ramp_target = -1; /* 目标值；-1=无 */
|
||
static unsigned long long vol_ramp_next_at = 0;
|
||
static unsigned long long vol_ramp_press_at = 0; /* M2.18 Bug 4：本方向键按下时刻（长按判据） */
|
||
|
||
static void vol_ramp_begin(int delta)
|
||
{
|
||
int target = vol_clamp(settings_volume + delta);
|
||
if (target == settings_volume) return;
|
||
vol_ramp_dir = (target > settings_volume) ? 1 : -1;
|
||
vol_ramp_target = target;
|
||
vol_ramp_press_at = now_ms(); /* M2.18 Bug 4：记录该方向键按下时刻，供 CLICK_MS 长按判定 */
|
||
vol_ramp_next_at = 0; /* 立即迈第一步，给即时反馈 */
|
||
}
|
||
|
||
/* 每主循环 tick 调；key_held=该方向按键是否仍按住（长按续爬）。返回 1=仍在渐变。
|
||
* M2.18 Bug 4 语义：单击(<CLICK_MS=400ms) 到 target 即停（只跳 step 格）；长按(≥400ms) 才
|
||
* 续段连续爬。普通按压力 50-150ms 远大于 VOL_RAMP_MS(15ms)，旧逻辑在到 target 后只要
|
||
* key_held=1 就续段 → 单击被当成长按，连爬 6~7 格（「点一下跳好几格」）。CLICK_MS 此前只
|
||
* 被 kd_tick 状态机使用，vol_ramp 路径从未接上。 */
|
||
static int vol_ramp_tick(int key_held)
|
||
{
|
||
if (vol_ramp_dir == 0) return 0;
|
||
unsigned long long now = now_ms();
|
||
if (now < vol_ramp_next_at) return 1;
|
||
vol_ramp_next_at = now + VOL_RAMP_MS;
|
||
/* 先看是否已到「当前目标值」（settings_volume 等于 target，而非候选 v）——
|
||
* 因为一旦在 target 再取 v=settings_volume+dir 便越过 target，导致 hold_wait 失效继续爬。 */
|
||
if (settings_volume == vol_ramp_target) {
|
||
if (!key_held) { /* 松开 → 一段完成，结束（单击到 target 即停，只跳 step 格） */
|
||
vol_ramp_dir = 0; vol_ramp_target = -1;
|
||
meow_settings_save(); return 0;
|
||
}
|
||
if (now - vol_ramp_press_at < CLICK_MS) {
|
||
/* hold_wait：已到 target 但未到长按阈值 → 停在 target 不爬（保持待命不清 dir，
|
||
* 等长按激活或松开）；若直接续段，长按第一次到 target 就断了。 */
|
||
return 1;
|
||
}
|
||
/* 长按激活：续段（在 target 基础上再 +step） */
|
||
vol_ramp_target = vol_clamp(vol_ramp_target + vol_ramp_dir * settings_volume_step);
|
||
if (vol_ramp_target == settings_volume) { /* 续段到上限无进展 → 结束 */
|
||
vol_ramp_dir = 0; vol_ramp_target = -1;
|
||
meow_settings_save(); return 0;
|
||
}
|
||
}
|
||
int v = vol_clamp(settings_volume + vol_ramp_dir);
|
||
if (v == settings_volume) { /* 已达上下限 */
|
||
vol_ramp_dir = 0; vol_ramp_target = -1;
|
||
meow_settings_save(); return 0;
|
||
}
|
||
meow_settings_set_int("audio.volume", v); /* 更新 backend 内存 + 同步缓存（不逐 1% 落盘） */
|
||
meow_dac_vol_write(settings_volume); /* 每 1% 写一次真实 DAC（settings_volume 已同步） */
|
||
return 1;
|
||
}
|
||
|
||
/* 步进调节（±settings_volume_step）→ 起线性渐变（1% 爬，见上）。 */
|
||
static void settings_volume_adj(int delta) { vol_ramp_begin(delta); }
|
||
|
||
/* MeowOS 音量 API：get 返回当前（= 写入 DAC 的映射值）；set 写真实 DAC + 持久化。 */
|
||
static void meow_vol_set(int pct) { settings_volume_set(pct); }
|
||
static int meow_vol_get(void) { return settings_volume; }
|
||
|
||
/* ================================================================== */
|
||
/* 系统状态统一快照（A：进 MeowOS 全量重抓 + 每进必刷） */
|
||
/* 主循环 10ms 热键轮询绝不读系统态；全量 meow_sys_refresh() 仅在进 */
|
||
/* MeowOS 时调一次；1s 轻刷 meow_sys_light() 只更新时钟/电量/WiFi， */
|
||
/* 并约 5s 节流探测一次蓝牙角色(M2.48)。 */
|
||
/* 状态栏/后续设置/面板统一读此快照，单点一致，避免重复读 amixer/sysfs。*/
|
||
/* ================================================================== */
|
||
typedef struct meow_sys_state {
|
||
int batt; /* 容量 % 0-100，-1 未知 */
|
||
int charging; /* 1 充电 0 放电 */
|
||
int batt_mv; /* 电压 mV */
|
||
int wifi_on; /* M2.48：1 网卡 up（射频开）0 down（关则不显示图标） */
|
||
int wifi_connected;/* M2.48：1 已关联 AP（operstate up）0 未连（区分「网卡up未连」→WIFI_NO） */
|
||
char wifi_ssid[33];
|
||
char wifi_ip[16];
|
||
int bt_on; /* 1 蓝牙上电 0 关 */
|
||
int bt_seen; /* hci 节点存在 1/0（无模块不放图标） */
|
||
int bt_role; /* M2.48：蓝牙角色（bt_role() 判定缓存）：BT_ROLE_* */
|
||
int vol; /* 系统软件音量 0-100（settings） */
|
||
int brightness; /* sysfs */
|
||
long data_free_kb; /* /data 剩余 KB */
|
||
int sd_mounted; /* TF 卡已挂载 */
|
||
long sd_free_kb; long sd_total_kb;
|
||
int mode; /* 1 meow 0 hiby（调用方） */
|
||
int napps; /* 应用数（调用方） */
|
||
char ver[16];
|
||
} meow_sys_state;
|
||
static meow_sys_state g_sys;
|
||
|
||
/* M2.48 蓝牙角色（状态栏多态 + 设置页"蓝牙模式"行共用；bt_role() 判定，缓存进 g_sys.bt_role） */
|
||
#define BT_ROLE_OFF 0 /* 关 */
|
||
#define BT_ROLE_ON_NO_CONN 1 /* 开未连接 */
|
||
#define BT_ROLE_MASTER 2 /* 主模式：连了外围（如耳机） */
|
||
#define BT_ROLE_SLAVE 3 /* 从模式：被远端接入，设备自身当耳机 */
|
||
#define BT_ROLE_UNKNOWN (-1) /* 判定失败（调用方按实际态兜底） */
|
||
static char g_bt_mode[48] = "开启未连接"; /* 设置页"蓝牙模式"行展示（bt_role_refresh 刷新） */
|
||
static int bt_role(char *desc, int len); /* 前向声明；实现在网络段（用 popen 带超时） */
|
||
static void bt_role_refresh(int force); /* 节流重探（force=1 立即；进系统/设置页/网络动作用） */
|
||
|
||
/* M2.47 版本号单一数据源：/etc/meowos_version（固件内独立文件，打包脚本写）。
|
||
* launcher 启动时读它，右下角显示/SSH 识别同一来源；不再维护 MEOWOS_VERSION 宏与文件两处。
|
||
* 读取失败/缺失时保留内置默认（最后一次编译时版本）。 */
|
||
#define MEOWOS_VERSION_FILE "/etc/meowos_version"
|
||
#define MEOWOS_VERSION_DEF MEOWOS_VERSION /* 兜底默认 = 编译期宏；运行时读 /etc/meowos_version 覆盖 */
|
||
static char g_meowos_version[16] = MEOWOS_VERSION_DEF;
|
||
static void load_meowos_version(void)
|
||
{
|
||
FILE *f = fopen(MEOWOS_VERSION_FILE, "r");
|
||
if (!f) { logmsg("meowos_version: %s missing, use default %s", MEOWOS_VERSION_FILE, g_meowos_version); return; }
|
||
char buf[32];
|
||
if (fgets(buf, sizeof buf, f)) {
|
||
char *e = buf + strlen(buf);
|
||
while (e > buf && (e[-1] == '\n' || e[-1] == '\r' || e[-1] == ' ')) e--;
|
||
*e = 0;
|
||
if (buf[0]) snprintf(g_meowos_version, sizeof g_meowos_version, "%s", buf);
|
||
}
|
||
fclose(f);
|
||
logmsg("meowos_version: read %s = '%s'", MEOWOS_VERSION_FILE, g_meowos_version);
|
||
}
|
||
|
||
/* 读一份 sysfs 字符串（剥尾随换行）；失败回退 "" */
|
||
static void read_sys_str(const char *path, char *buf, size_t n)
|
||
{
|
||
buf[0] = 0;
|
||
int fd = open(path, O_RDONLY);
|
||
if (fd < 0) return;
|
||
ssize_t r = read(fd, buf, n - 1);
|
||
close(fd);
|
||
if (r <= 0) { buf[0] = 0; return; }
|
||
buf[r] = 0;
|
||
while (r > 0 && (buf[r-1] == '\n' || buf[r-1] == '\r')) buf[--r] = 0;
|
||
}
|
||
|
||
/* 蓝牙实际上电状态（A/E：不只看 hci0 存在——节点常在但控制器可能 DOWN）。
|
||
* 本设备 /sys/class/bluetooth/hci0/powered 不存在（旧内核/BlueZ 5.54），
|
||
* 权威来源为 hciconfig -a hci0 的 UP/DOWN 行。费用较高（spawn），故缓存，
|
||
* 由 meow_sys_refresh()（进系统一次）/meow_sys_light()（轻刷）节流更新；
|
||
* 状态栏只读 g_sys.bt_on。 */
|
||
static int hci_powered(void)
|
||
{
|
||
FILE *p = popen("hciconfig -a hci0 2>/dev/null", "r");
|
||
if (!p) return 0;
|
||
int up = 0;
|
||
char buf[256];
|
||
while (fgets(buf, sizeof buf, p)) {
|
||
/* 状态行含 "UP RUNNING" 或 "DOWN"。匹配单词 UP（避免误中 UART 等）。 */
|
||
char *s = buf, *tok;
|
||
while ((tok = strsep(&s, " \t\r\n")) != NULL) {
|
||
if (!strcmp(tok, "UP")) { up = 1; break; }
|
||
}
|
||
}
|
||
pclose(p);
|
||
return up;
|
||
}
|
||
|
||
/* 全量重抓（进 MeowOS 时调用一次；阻塞可接受）。绝不放进 10ms 主循环。 */
|
||
static void meow_sys_refresh(void)
|
||
{
|
||
load_meowos_version(); /* M2.47：读 /etc/meowos_version（单一数据源，每次刷新对齐） */
|
||
int b = read_file_int("/sys/class/power_supply/battery/capacity");
|
||
g_sys.batt = (b >= 0 && b <= 100) ? b : -1;
|
||
char st[16];
|
||
read_sys_str("/sys/class/power_supply/battery/status", st, sizeof st);
|
||
g_sys.charging = (strstr(st, "Charg") || strstr(st, "Full")) ? 1 : 0;
|
||
g_sys.batt_mv = read_file_int("/sys/class/power_supply/battery/voltage_now") / 1000;
|
||
|
||
/* WiFi：wifi_on=网卡管理态 up（射频开）；wifi_connected=operstate up（已关联 AP）。
|
||
* M2.48：二者分工，状态栏才能区分「开未连接(WIFI_NO)」与「已连接(信号分档)」。 */
|
||
char op[16];
|
||
read_sys_str("/sys/class/net/wlan0/operstate", op, sizeof op);
|
||
g_sys.wifi_connected = !strcmp(op, "up") ? 1 : 0;
|
||
g_sys.wifi_on = wlan_radio_up();
|
||
g_sys.wifi_ip[0] = 0; g_sys.wifi_ssid[0] = 0;
|
||
if (g_sys.wifi_connected) {
|
||
/* 行形如 "2: wlan0 inet <device_ip>/24 brd ..."，取 inet 后第一个斜杠前的 token。
|
||
* 用大缓冲读整行，再从局部 token 拷贝到 16B 小字段（避免 OOB）。 */
|
||
char big[256];
|
||
FILE *p = popen("ip -o addr show wlan0 2>/dev/null | grep 'inet '", "r");
|
||
if (p) {
|
||
if (fgets(big, sizeof big, p)) {
|
||
char *s = strstr(big, "inet ");
|
||
if (s) { s += 5; while (*s == ' ') s++; char *e = strchr(s, '/'); if (e) *e = 0;
|
||
snprintf(g_sys.wifi_ip, sizeof g_sys.wifi_ip, "%s", s); }
|
||
}
|
||
pclose(p);
|
||
}
|
||
/* SSID 尽力读（wpa_cli 若在；失败留空不外溢）。注意：wpa_cli 可能因 wpa_supplicant
|
||
* 未跑而挂起——用后台 + 短等待避免阻塞 UI；超时即放弃（SSID 仅面板用，状态栏不读）。 */
|
||
}
|
||
|
||
/* 蓝牙：hci0 存在性 + 上电状态 + M2.48 角色/连接（进系统全量重探一次） */
|
||
g_sys.bt_seen = access("/sys/class/bluetooth/hci0", F_OK) == 0;
|
||
g_sys.bt_on = g_sys.bt_seen ? hci_powered() : 0;
|
||
bt_role_refresh(1); /* 立即探测角色/连接态，供状态栏与设置页"蓝牙模式"行 */
|
||
|
||
/* 音量（settings；进 MeowOS 全量时把真实 DAC 同步到当前档）/ 亮度 */
|
||
g_sys.vol = settings_volume_get();
|
||
meow_dac_vol_write(settings_volume); /* M2.13：进 MeowOS 即把 CS43198 DAC 置为当前音量 */
|
||
int br = read_brightness();
|
||
g_sys.brightness = (br >= 0) ? br : 0;
|
||
|
||
/* 存储：/data 剩余 + TF 卡挂载容量 */
|
||
g_sys.data_free_kb = 0;
|
||
FILE *df = popen("df -k /data 2>/dev/null | awk 'NR==2{print $4}'", "r");
|
||
if (df) { char x[24]; if (fgets(x, sizeof x, df)) g_sys.data_free_kb = atol(x); pclose(df); }
|
||
g_sys.sd_mounted = sd_mounted();
|
||
g_sys.sd_free_kb = g_sys.sd_total_kb = 0;
|
||
if (g_sys.sd_mounted) {
|
||
FILE *df2 = popen("df -k /usr/data/mnt/sd_0 2>/dev/null | awk 'NR==2{print $4, $2}'", "r");
|
||
if (df2) { char x[48]; if (fgets(x, sizeof x, df2)) { sscanf(x, "%ld %ld", &g_sys.sd_free_kb, &g_sys.sd_total_kb); } pclose(df2); }
|
||
}
|
||
|
||
snprintf(g_sys.ver, sizeof g_sys.ver, "%s", g_meowos_version);
|
||
logmsg("sys snapshot: batt=%d%% chg=%d wifi=%d ssid=%s ip=%s bt=%d/%d vol=%d bri=%d "
|
||
"data_free=%ldKB sd=%d(%ld/%ldKB)",
|
||
g_sys.batt, g_sys.charging, g_sys.wifi_on, g_sys.wifi_ssid[0]?g_sys.wifi_ssid:"-",
|
||
g_sys.wifi_ip[0]?g_sys.wifi_ip:"-", g_sys.bt_on, g_sys.bt_seen,
|
||
g_sys.vol, g_sys.brightness, g_sys.data_free_kb, g_sys.sd_mounted,
|
||
g_sys.sd_free_kb, g_sys.sd_total_kb);
|
||
}
|
||
|
||
/* 轻刷（1s 定时，只更新时钟/电量/WiFi 信号 + 节流探测蓝牙角色——便宜，绝不碰负载/温度） */
|
||
static void meow_sys_light(void)
|
||
{
|
||
int b = read_file_int("/sys/class/power_supply/battery/capacity");
|
||
if (b >= 0 && b <= 100) g_sys.batt = b;
|
||
char op[16];
|
||
read_sys_str("/sys/class/net/wlan0/operstate", op, sizeof op);
|
||
g_sys.wifi_connected = !strcmp(op, "up") ? 1 : 0;
|
||
g_sys.wifi_on = wlan_radio_up();
|
||
g_sys.vol = settings_volume_get(); /* 每进 MeowOS 重抓；此处同步内存值 */
|
||
bt_role_refresh(0); /* M2.48：节流探测蓝牙角色（约 5s 一次，不阻塞主循环） */
|
||
}
|
||
|
||
/* 40px status bar (Bug 1, 2026-08-28): the old 20px bar is doubled so the
|
||
* app list can also show voltage + bluetooth alongside time / battery / wifi.
|
||
* line 1: time (left) battery% WIFI BT (right)
|
||
* line 2: VOL nn% (left)
|
||
* M2.11：值全部取自 meow_sys_state 快照（g_sys），不再每帧读 amixer/sysfs；
|
||
* 音量 = settings audio.volume（非 CS43198 死镜像）；蓝牙 = 实际 powered；
|
||
* WiFi = operstate 实际 up。纯黑背景 = menu_bg；分隔线 y=28（栏高 40→28）。*/
|
||
/* ---- 状态栏固定完整格重绘（M2.17：修「整个状态栏部件脏区残留」）----
|
||
* 根因：M2.16 各部件/数字更新只把「当前内容包围盒」标为脏区并用它清底——旧内容超出新包围盒的
|
||
* 部分（时钟数字 '0' 底弧落于新 '1' 包围盒外、电量%/WiFi/BT 出现或消失、音量数字）未被重绘 →
|
||
* 残留；按音量键全屏刷新才清。修法：状态栏（0,0,480×28）用一条固定完整格：字段更新时整条清底 +
|
||
* 重绘时钟/右侧 + 整条标脏（SDK back_buf 做最终态 → meow_ui_flush 原子 blit 整条，无中间态）。
|
||
* 任何旧内容残留被整条覆盖。480×28≈27KB 极小，每秒一 blit 无碍；分隔线 y=28 单独绘制不在此列。
|
||
* （逐字段固定格在 480px 宽 + 「蓝牙」CJK 全字段同现时与时钟格重叠，故取整条退化——§18.46。） */
|
||
#define SB_BAR_Y 0
|
||
#define SB_BAR_H 28 /* rows 0..27；分隔线在 y=28 不在此（40→28，用户定） */
|
||
#define SB_FONT 20 /* 状态栏字体 28→20（28px 栏放不下 28 号；垂直居中锚点见 sb_text_y） */
|
||
static int g_sb_clock_x, g_sb_clock_y, g_sb_clock_w, g_sb_clock_h;
|
||
static int g_sb_right_x, g_sb_right_y, g_sb_right_w, g_sb_right_h;
|
||
|
||
/* ---- 主题（MD3 color roles，dark/light 两套）----
|
||
* M2.44：上移到本处（状态栏绘制之前），使状态栏/设置页共用同一套主题色板。 */
|
||
typedef struct meow_ui_theme {
|
||
uint32_t surface; /* 全局背景 */
|
||
uint32_t surface_variant; /* 卡片/列表底 */
|
||
uint32_t surface_container; /* 控件容器 */
|
||
uint32_t primary; /* 高亮/选中/accent */
|
||
uint32_t on_surface; /* 主文字 */
|
||
uint32_t on_surface_variant; /* 次文字 */
|
||
uint32_t outline; /* 描边/分隔线 */
|
||
uint32_t error; /* 错误提示 */
|
||
uint32_t surface_tint; /* 选中态叠色 */
|
||
} meow_ui_theme_t;
|
||
|
||
/* MD3 tonal palette（565 参考值见 MD3_UI_SPEC §1；此处存 24-bit RGB，#hex） */
|
||
static const meow_ui_theme_t meow_ui_theme_dark = {
|
||
0x141824, 0x1E2436, 0x263038, 0x4A6A9A, 0xFFFFFF,
|
||
0x9AA4C8, 0x2A2E38, 0xE57373, 0x4A6A9A
|
||
};
|
||
static const meow_ui_theme_t meow_ui_theme_light = {
|
||
0xE8EAF0, 0xD5D9E4, 0xCFD4E0, 0x2A5A8A, 0x1A1A2A,
|
||
0x4A4F5A, 0x9AA4C8, 0xB3261E, 0x2A5A8A
|
||
};
|
||
|
||
/* B2b 主题三方式（manual 深色 / manual 浅色 / 时段自动）。
|
||
* display.theme_mode（enum "manual,auto"）：manual=读 display.theme（dark/light）；
|
||
* auto=按深色时段。display.theme 保留为手动深浅的当前值（manual 下 s_ui_theme 直读它）。 */
|
||
#define THEME_MODE_MANUAL 0 /* display.theme_mode 枚举索引 0 = 手动 */
|
||
#define THEME_MODE_AUTO 1 /* display.theme_mode 枚举索引 1 = 时段自动 */
|
||
/* 获取当前本地时刻的「当天第几分钟」(tm_hour*60+tm_min)；供时段判定用 */
|
||
static int s_now_min_of_day(void)
|
||
{
|
||
time_t t = time(NULL);
|
||
struct tm tm;
|
||
localtime_r(&t, &tm);
|
||
return tm.tm_hour * 60 + tm.tm_min;
|
||
}
|
||
/* 深色时段判定（纯逻辑，便于单测）：now_min ∈ [start, end) → 深色。
|
||
* - start==end 视为未配置，返回 -1（由调用方决定回退策略）。
|
||
* - start<end：非跨天，如 720→1080 = 12:00→18:00，now ∈ [720,1080) 为深色。
|
||
* - start>end：跨午夜，如 1140→420 = 19:00→次日07:00，now∈[1140,1440)∪[0,420) 为深色。
|
||
* - 边界：end 半开（恰好 end 分回到浅色），start 闭（恰好 start 分进入深色）。 */
|
||
static int theme_should_dark(int now_min, int start, int end)
|
||
{
|
||
if (start == end) return -1; /* 未配置 */
|
||
if (start < end)
|
||
return (now_min >= start && now_min < end) ? 1 : 0;
|
||
return (now_min >= start || now_min < end) ? 1 : 0; /* 跨午夜 */
|
||
}
|
||
/* 当前主题（dark/light 两套；接 display.theme_mode + display.theme）。
|
||
* manual（mode==THEME_MODE_MANUAL）：直读 display.theme（dark/light），保持原有行为。
|
||
* auto（mode==THEME_MODE_AUTO）：读深色时段两键 + 当前本地分钟；start==end 未配置 →
|
||
* 回退 manual（读 display.theme，避免误判全天深色）。
|
||
* 读取失败一律回退 dark。 */
|
||
static const meow_ui_theme_t *s_ui_theme(void)
|
||
{
|
||
int mode = THEME_MODE_MANUAL;
|
||
if (meow_settings_get_enum("display.theme_mode", &mode) != 0) mode = THEME_MODE_MANUAL;
|
||
int v = 0; /* display.theme（manual）当前索引 */
|
||
int have_manual = (meow_settings_get_enum("display.theme", &v) == 0);
|
||
if (mode == THEME_MODE_AUTO) {
|
||
int start = 0, end = 0;
|
||
meow_settings_get_int("display.theme_dark_start", &start);
|
||
meow_settings_get_int("display.theme_dark_end", &end);
|
||
int d = theme_should_dark(s_now_min_of_day(), start, end);
|
||
if (d < 0) { /* 未配置：回退 manual（display.theme） */
|
||
if (have_manual && v == 1) return &meow_ui_theme_light;
|
||
return &meow_ui_theme_dark;
|
||
}
|
||
return d ? &meow_ui_theme_dark : &meow_ui_theme_light;
|
||
}
|
||
/* manual：照旧读 display.theme */
|
||
if (have_manual && v == 1) return &meow_ui_theme_light;
|
||
return &meow_ui_theme_dark;
|
||
}
|
||
|
||
/* ---- 状态栏右簇图标化（MD3）---- 布局常量 */
|
||
#define SB_TGAP 6 /* 图标右缘 ↔ 文字间隙 */
|
||
#define SB_XGAP 10 /* 相邻两项（右→左）间隙 */
|
||
#define SB_ICON_INK 16 /* 主图标目标 ink 高（px）：24→16（28px 栏等比缩放，留上下边距） */
|
||
#define SB_CLK_MARGIN 14 /* 右簇左缘相对时钟右缘须留出的安全间距 */
|
||
/* 图标 ink 垂直中心线 = 状态栏文字垂直中心（28px 栏文字按 (28-行高)/2 锚定后中心≈14，见 sb_text_y）。
|
||
* 图标 ink 对齐此线 → 与数字/文字同中线（修「图标比文字低」）；如需微调只改这一个常量。 */
|
||
#define SB_ICON_CY 14
|
||
static int g_sb_icon_cy = SB_ICON_CY;
|
||
|
||
/* 状态栏文字垂直锚 y（行首升线顶）：(栏高-行高)/2 把文字垂直居中于 28px 栏；
|
||
* 下限 1 防极端行高（>栏高）时算出负 y 溢出顶端（不越界优先）。 */
|
||
static int sb_text_y(void)
|
||
{
|
||
int y = (SB_BAR_H - ui_text_height(SB_FONT)) / 2;
|
||
return (y < 1) ? 1 : y;
|
||
}
|
||
|
||
/* 状态栏 MD3 图标 blit：把 sb_icons.h 的 32x32 单通道 alpha 位图画进状态栏（fb = SDK back_buf）。
|
||
* x = 图标槽左缘（槽宽 SB_ICON_SIZE）；fg = 24-bit RGB 前景色（主题 on_surface / on_surface_variant）。
|
||
* M2.46-2 视觉对齐（音量图标小一圈/下边距、图标与文字垂直中心）：
|
||
* - 先求该位图 ink 边界（阈值 32，忽略近透明抗锯齿）；按 ink 边界在槽内水平居中，并把 ink 垂直
|
||
* 中心对齐到全局 g_sb_icon_cy（==状态栏文字中心），→ 所有图标共用同一光学中线，不再「偏下」。
|
||
* - ink_h>0 时对 ink 做等比缩放（绘制时最近邻采样，源位图不变）到该 ink 高：主图标统一用
|
||
* SB_ICON_INK，音量（volume_up ink 较矮）随之放大到与电量/亮度一致 → 不显「小一圈」。
|
||
* - ink_h==0 保持位图自然 ink 尺寸（仅居中）：用于 WiFi 强弱档——较短 ink（少一格）本身即
|
||
* 「信号弱」语义，不可被等比拉大。
|
||
* 像素 = 前景与背景按 alpha 软边混合（a<8 跳过透明；a>=240 直写前景；其余按 a>>4 在 565 空间
|
||
* 插值），与 blit_pm_icon 同构——暗/亮主题下图标随状态栏底色一起换色。 */
|
||
static void sb_blit_icon(int icon_idx, int x, uint32_t fg, int ink_h)
|
||
{
|
||
const unsigned char *src = sb_icons[icon_idx].data;
|
||
uint16_t col = rgb565(fg);
|
||
/* 1) ink 边界（含空图兜底） */
|
||
int minx = SB_ICON_SIZE, miny = SB_ICON_SIZE, maxx = -1, maxy = -1;
|
||
for (int i = 0; i < SB_ICON_SIZE * SB_ICON_SIZE; i++) {
|
||
if (src[i] >= 32) {
|
||
int xx = i % SB_ICON_SIZE, yy = i / SB_ICON_SIZE;
|
||
if (xx < minx) minx = xx; if (xx > maxx) maxx = xx;
|
||
if (yy < miny) miny = yy; if (yy > maxy) maxy = yy;
|
||
}
|
||
}
|
||
if (maxx < minx || maxy < miny) { minx = miny = 0; maxx = maxy = SB_ICON_SIZE - 1; }
|
||
int ink_w = maxx - minx + 1, ink_h_n = maxy - miny + 1;
|
||
int t_h = (ink_h > 0) ? ink_h : ink_h_n; /* 目标 ink 高 */
|
||
int t_w = ink_w * t_h / ink_h_n; if (t_w < 1) t_w = 1;
|
||
if (t_w > SB_ICON_SIZE * 2) t_w = SB_ICON_SIZE * 2; /* 防御：等比极端上限 */
|
||
/* 2) 目标框左上：水平居中于 32px 槽；垂直中心 = g_sb_icon_cy */
|
||
int x0 = x + (SB_ICON_SIZE - t_w) / 2;
|
||
int y0 = g_sb_icon_cy - t_h / 2;
|
||
/* 3) 最近邻采样映射：目标 (dx,dy) ← 源 ink (minx+dx*ink_w/t_w, miny+dy*ink_h_n/t_h) */
|
||
for (int dy = 0; dy < t_h; dy++) {
|
||
int ty = y0 + dy;
|
||
if (ty < 0 || ty >= fb_yres) continue;
|
||
int sy = miny + (dy * ink_h_n) / t_h;
|
||
uint16_t *row = (uint16_t *)fb + ty * (fb_line / 2);
|
||
for (int dx = 0; dx < t_w; dx++) {
|
||
int tx = x0 + dx;
|
||
if (tx < 0 || tx >= fb_xres) continue;
|
||
int sx = minx + (dx * ink_w) / t_w;
|
||
int a = src[sy * SB_ICON_SIZE + sx];
|
||
if (a < 8) continue; /* 透明像素跳过 */
|
||
uint16_t bg = row[tx];
|
||
if (a >= 240) { row[tx] = col; continue; }
|
||
int a4 = a >> 4; /* 0..15 */
|
||
int r = ((col >> 11) * a4 + ((bg >> 11) & 0x1F) * (16 - a4)) >> 4;
|
||
int g = (((col >> 5) & 0x3F) * a4 + ((bg >> 5) & 0x3F) * (16 - a4)) >> 4;
|
||
int b = ((col & 0x1F) * a4 + (bg & 0x1F) * (16 - a4)) >> 4;
|
||
row[tx] = (uint16_t)((r << 11) | (g << 5) | b);
|
||
}
|
||
}
|
||
}
|
||
|
||
/* 画一个右对齐状态栏项：右边界 = *xr，画完向左推进 *xr（含 SB_XGAP 项间隙）。
|
||
* icon>=0 画图标（可配右侧文字 txt；txt==NULL 则仅图标）。文字/图标同用主题色 col。
|
||
* ink_h 传给 sb_blit_icon（主图标用 SB_ICON_INK 等大；WiFi 强弱档传 0 保持自然 ink）。
|
||
* 返回该项左边缘（供 g_sb_right_x 包围盒）。 */
|
||
static int sb_r_place(int *xr, int icon, const char *txt, uint32_t col, int ink_h)
|
||
{
|
||
int iconw = (icon >= 0) ? SB_ICON_SIZE : 0;
|
||
int gap = (icon >= 0 && txt) ? SB_TGAP : 0;
|
||
int tw = txt ? ui_width(txt, SB_FONT) : 0;
|
||
int x = *xr - (iconw + gap + tw);
|
||
if (icon >= 0) { sb_blit_icon(icon, x, col, ink_h); x += iconw + gap; }
|
||
if (txt) ui_draw(x, sb_text_y(), txt, col, SB_FONT);
|
||
*xr -= (iconw + gap + tw) + SB_XGAP;
|
||
return *xr + SB_XGAP;
|
||
}
|
||
|
||
#define WIFI_LVL_UNKNOWN (-1000) /* wifi_signal_level 读取失败哨兵（低于任何真实 dBm） */
|
||
/* 读 /proc/net/wireless 的 wlan0 level（dBm，如 -46）；失败（文件不存在/无 wlan0 行/解析失败）返回
|
||
* WIFI_LVL_UNKNOWN。行格式（Linux wext）形如 " wlan0: 0000 64. -46. -256 0 ..."；
|
||
* 接口名后第 3 个空白分隔数值 = level（注意末尾带 '.'，需剥离）。 */
|
||
static int wifi_signal_level(void)
|
||
{
|
||
FILE *f = fopen("/proc/net/wireless", "r");
|
||
if (!f) return WIFI_LVL_UNKNOWN;
|
||
char line[256];
|
||
int lvl = WIFI_LVL_UNKNOWN;
|
||
while (fgets(line, sizeof line, f)) {
|
||
char *p = strstr(line, "wlan0:");
|
||
if (!p) continue;
|
||
p += 6; /* 跳过 "wlan0:" */
|
||
int tok = 0;
|
||
while (*p) {
|
||
while (*p == ' ' || *p == '\t') p++;
|
||
if (!*p) break;
|
||
char *t = p;
|
||
while (*p && *p != ' ' && *p != '\t' && *p != '\n') p++;
|
||
char save = *p; *p = 0; /* 临时截断 token */
|
||
if (tok == 2) { /* 第 3 个数值（0 起） = level */
|
||
size_t n = strlen(t);
|
||
if (n && t[n - 1] == '.') t[n - 1] = 0; /* 去尾部 '.'（-46. → -46） */
|
||
lvl = atoi(t);
|
||
*p = save;
|
||
break;
|
||
}
|
||
*p = save;
|
||
tok++;
|
||
}
|
||
break; /* 只需 wlan0 行 */
|
||
}
|
||
fclose(f);
|
||
return lvl;
|
||
}
|
||
|
||
/* 整条状态栏：清底→重绘时钟+右侧信息→整条标脏。调用点：时钟每秒 / 电量·WiFi·音量事件。 */
|
||
static void sb_redraw(void)
|
||
{
|
||
const meow_ui_theme_t *th = s_ui_theme(); /* M2.44 状态栏接主题（浅色主题浅底深字，不再固定深色） */
|
||
uint32_t sb_bg = th->surface, sb_fg = th->on_surface;
|
||
fill_rect(0, SB_BAR_Y, fb_xres, SB_BAR_H, sb_bg); /* 整条清底→无旧内容残留 */
|
||
char timebuf[16];
|
||
time_t now = time(NULL);
|
||
struct tm tm;
|
||
localtime_r(&now, &tm);
|
||
snprintf(timebuf, sizeof timebuf, "%02d:%02d:%02d", tm.tm_hour, tm.tm_min, tm.tm_sec);
|
||
ui_draw(8, sb_text_y(), timebuf, sb_fg, SB_FONT);
|
||
/* 图标 ink 垂直中心 = 状态栏文字中心（SB_ICON_CY=14，28px 栏文字中心）：同中线。 */
|
||
g_sb_icon_cy = SB_ICON_CY;
|
||
/* 右簇 MD3 图标化（从右端 fb_xres-8 往左）：[电量图标+%] [音量图标+%] [蓝牙图标] [WiFi图标] [亮度图标+%]。
|
||
* M2.46-2：音量/电量顺序互换（最右由音量改为电量）；亮度由 on_surface_variant 改为主色 on_surface；
|
||
* WiFi 按信号强度分档（/proc/net/wireless level：≥-60 强 / -60..-75 中 / <-75 弱）。
|
||
* 主项色 on_surface；次项（蓝牙）用 on_surface_variant 稍淡。亮度「可选」：仅在右簇左缘
|
||
* 与时钟右缘相距足够（SB_CLK_MARGIN）时才画，否则整体让位，避免与时钟叠字。 */
|
||
uint32_t sb_fg2 = th->on_surface_variant;
|
||
char vol[16], batt[16], bright[16];
|
||
int xr = fb_xres - 8;
|
||
if (g_sys.batt >= 0) { /* 电量：图标+%（未知时不画）——最右项 */
|
||
snprintf(batt, sizeof batt, "%d%%", g_sys.batt);
|
||
sb_r_place(&xr, SB_I_BATT, batt, sb_fg, SB_ICON_INK);
|
||
}
|
||
snprintf(vol, sizeof vol, "%d%%", g_sys.vol);
|
||
sb_r_place(&xr, SB_I_VOL, vol, sb_fg, SB_ICON_INK); /* 音量：图标+% */
|
||
/* M2.48 蓝牙多态：关(bt_on=0 不画，见上行门)；开未连接→SB_I_BT_NO；主模式/从模式→SB_I_BT_CONN。
|
||
* 主/从区分用颜色：主模式走次色 sb_fg2（与外设相连），从模式（被连当耳机）走主色 sb_fg 稍醒目。 */
|
||
if (g_sys.bt_seen && g_sys.bt_on) {
|
||
int bco = SB_I_BT_NO; /* 默认：开未连接 */
|
||
uint32_t bcol = sb_fg2;
|
||
if (g_sys.bt_role == BT_ROLE_MASTER) { bco = SB_I_BT_CONN; bcol = sb_fg2; }
|
||
else if (g_sys.bt_role == BT_ROLE_SLAVE) { bco = SB_I_BT_CONN; bcol = sb_fg; }
|
||
sb_r_place(&xr, bco, NULL, bcol, SB_ICON_INK);
|
||
}
|
||
/* M2.48 WiFi 多态：网卡关(wifi_on=0 不画)；开未连接→SB_I_WIFI_NO；已连接→按信号分档。 */
|
||
if (g_sys.wifi_on) { /* WiFi：仅图标（按连接态+信号分档） */
|
||
int wco = SB_I_WIFI_NO; /* 默认：网卡开但未连 */
|
||
if (g_sys.wifi_connected) {
|
||
wco = SB_I_WIFI_STRONG; /* 已连接；读取失败/未知 → 满格 */
|
||
int wl = wifi_signal_level();
|
||
if (wl != WIFI_LVL_UNKNOWN) {
|
||
if (wl >= -60) wco = SB_I_WIFI_STRONG;
|
||
else if (wl >= -75) wco = SB_I_WIFI_MEDIUM;
|
||
else wco = SB_I_WIFI_WEAK;
|
||
}
|
||
}
|
||
/* 强弱档（MEDIUM/WEAK）保留自然 ink（少一格本身即语义）；SRONG/满格/开未连接走等大。 */
|
||
sb_r_place(&xr, wco, NULL, sb_fg,
|
||
(wco == SB_I_WIFI_MEDIUM || wco == SB_I_WIFI_WEAK) ? 0 : SB_ICON_INK);
|
||
}
|
||
if (g_sys.brightness > 0) {
|
||
int bl = (g_sys.brightness > 100) ? 100 : g_sys.brightness;
|
||
snprintf(bright, sizeof bright, "%d%%", bl);
|
||
int bw = SB_ICON_SIZE + SB_TGAP + ui_width(bright, SB_FONT) + SB_XGAP;
|
||
if (xr - bw > 8 + ui_width(timebuf, SB_FONT) + SB_CLK_MARGIN)
|
||
sb_r_place(&xr, SB_I_BRIGHT, bright, sb_fg, SB_ICON_INK); /* 亮度：图标+%（主色，与时钟不重叠才画） */
|
||
}
|
||
g_sb_clock_x = 4; g_sb_clock_y = sb_text_y();
|
||
g_sb_clock_w = 12 + ui_width(timebuf, SB_FONT); g_sb_clock_h = SB_BAR_H;
|
||
g_sb_right_x = xr + SB_XGAP;
|
||
g_sb_right_y = sb_text_y(); g_sb_right_w = (fb_xres - 8) - g_sb_right_x + 4;
|
||
g_sb_right_h = SB_BAR_H;
|
||
meow_dirty_add(0, SB_BAR_Y, fb_xres, SB_BAR_H); /* 整条标脏 */
|
||
}
|
||
|
||
/* 只重画状态栏整条到 SDK back_buf 并标整条脏 —— 每秒（时钟）/ 事件（电量/WiFi/音量）触发，绝不动列表。
|
||
* （取代 M2.16 的「只标当前内容包围盒」路径——它造成残留。） */
|
||
static void paint_sb_clock(void) { sb_redraw(); }
|
||
static void paint_sb_right(void) { sb_redraw(); }
|
||
|
||
static void draw_statusbar(void)
|
||
{
|
||
sb_redraw();
|
||
const meow_ui_theme_t *th = s_ui_theme(); /* M2.44 分隔线随主题 outline */
|
||
fill_rect(0, SB_BAR_H, fb_xres, 1, th->outline); /* separator（整条之外，单独绘制；栏底=28） */
|
||
}
|
||
|
||
/* returns 0 on success (app ran and exited), -1 on launch failure */
|
||
static int launch_app(struct app *a);
|
||
|
||
/* M2.36 B2b：实体系统设置页（定义在下方 write_brightness 之后；run_menu 触摸命中
|
||
* 「系统设置」行时调用，返回后由调用方重置按键防抖基线防面板误切换）。 */
|
||
static void run_settings_page(void);
|
||
|
||
/* 阶段B：通知中心面板（定义在下方 run_settings_page 之后；run_menu 顶部热区下滑调用）。
|
||
* *want_launch 初始为 -1；若点击通知命中可启动 app，返回时置为 apps[] 下标（run_menu 据此
|
||
* 走标准启动链路）。返回后由调用方重置按键防抖基线防面板误切换。 */
|
||
static void run_notif_center(struct app *apps, int napps, int *want_launch,
|
||
int live_open, int lox, int loy);
|
||
|
||
static int touch_fd = -1;
|
||
static int t_last_x = -1, t_last_y = -1;
|
||
static int t_down = 0;
|
||
static int t_down_x = 0, t_down_y = 0;
|
||
/* M2.23 手势原点锁定：BTN_TOUCH=1 只标「已按下」，坐标(goodix)不保证先于按下边沿，
|
||
* 故 t_down_x/y 延迟到「本次按下之后」的首个有效 ABS 才锁定，避免把上一手势残留
|
||
* (-1/旧坐标) 当本次原点。t_down_valid=0 表示本次尚未锁到有效坐标。 */
|
||
static int t_down_valid = 0;
|
||
/* ⑨ 顶部热区「跟手下拉」进入通知中心的 per-gesture latch：进入后置 1，本次手势不再二次进入；
|
||
* 由下次 touch-down 复位。防止「拖动中切入 run_notif_center 后返回」把同次手势再判成打开/滑动。 */
|
||
static int menu_live_open_pending = 0;
|
||
#define MENU_SWIPE_THRESH 65 /* px：抬手位移 >= 阈值判为滑动，不启动行（同 SDK SWIPE_THRESH） */
|
||
/* ⑨ 面板跟手下拉、半程可回（progress=手指位移映射；复用 mnp_anim_off/快照/ncp_anim_rebuild）。
|
||
* NCP_DRAG_ENTER_SLOP = 顶部热区下拉进入 run_notif_center（run_menu 切入时机）的位移阈值（px）；
|
||
* NCP_DRAG_THR_PCT = 松手锚定阈值（progress >= fix*40/100≈410 → 补到展开；否则收回=半程取消）。
|
||
* 拖满=面板高 PH（g_ncp_ph），实现「面板顶缘 1:1 跟手」：off = dy - PH。 */
|
||
#define NCP_DRAG_ENTER_SLOP 16
|
||
#define NCP_DRAG_THR_PCT 40
|
||
/* Bug 2/4 (2026-08-28): after an app exits we return to the menu, but touch
|
||
* events that were generated DURING the app run (the goodix ghost touch the
|
||
* v6.4 watchdog guards against, plus the back-tap/press that actually exited
|
||
* the app) are still queued on the launcher's touch fd and get replayed as
|
||
* fresh menu taps. A replayed tap on an app row relaunches the app (symptom:
|
||
* BYE then the app's main screen — Bug 2); a replayed tap on the "BACK TO
|
||
* PLAYER" row closes the menu and SIGCONTs the player (symptom: whole screen
|
||
* flashes back to the player — Bug 4). We drain the queue immediately after
|
||
* the app exits and ignore touches for a short cooldown that covers the
|
||
* measured 1.2-2.25s ghost window (matches the watchdog's COOLDOWN_MS). */
|
||
static unsigned long long menu_touch_cooldown_until = 0;
|
||
|
||
/* M2.6 幽灵触摸根除：会话边界（app退出/电源菜单关闭/启动/重启确认）统一
|
||
* drain 触摸队列 + 冷却（TAP_ARM_DELAY），避免触发开合的那次触摸/残留被
|
||
* 重放成「点击第 0 行 hello」。
|
||
* M2.22（D）：700ms 偏激进，把正常点击也当「启动残留触摸」丢弃（点一下没反应要点几下）。
|
||
* 用户要求「点一下就能进」，同时仍防 ghost 重放 → 调窄到 300ms。 */
|
||
#define TAP_ARM_DELAY_MS 300
|
||
static void menu_drain_touch(void)
|
||
{
|
||
if (touch_fd >= 0) {
|
||
unsigned char ev[16];
|
||
while (read(touch_fd, ev, sizeof ev) == (ssize_t)sizeof ev) { /* discard */ }
|
||
}
|
||
}
|
||
static void menu_arm_touch(long ms)
|
||
{
|
||
menu_drain_touch();
|
||
menu_touch_cooldown_until = now_ms() + ms;
|
||
}
|
||
|
||
/* Drain the touch queue + arm the post-app cooldown (call right after the
|
||
* app exits, before the menu resumes polling touch). The drain always runs so
|
||
* touches queued by the launch-attempt tail are cleared; the cooldown only
|
||
* arms when an app actually ran (app_ran) so a failed launch doesn't lock the
|
||
* menu out for 2.5s. */
|
||
static void menu_after_app_exit(int app_ran)
|
||
{
|
||
menu_drain_touch();
|
||
/* M2.22（D）：2500ms 冷却把正常的「app 退出后立即点下一个应用」也吞掉（点几下才进）。
|
||
* 用户要求点一下就能进 → 调窄到 1200ms，仍覆盖 goodix ghost 窗口（1.2–2.25s 实测略短，
|
||
* 与 watchdog COOLDOWN_MS 同阶），防启动重放。只调窄，保留 cooldown 本身。 */
|
||
if (app_ran) menu_touch_cooldown_until = now_ms() + 1200;
|
||
}
|
||
|
||
/* Header block (status bar + MEOWAPPS title + thin divider) covering the
|
||
* region y=0..58, kept separate from the app-list body so the ~1s clock tick
|
||
* (draw_clock) never redraws or tears the list. draw_menu fills the whole
|
||
* background then calls draw_header_content. The menu is pre-drawn before
|
||
* fb_norm_buf0 so the initial pan shows a complete frame. */
|
||
static void draw_header_content(void)
|
||
{
|
||
draw_statusbar();
|
||
/* M2.6 标题真字体（28px；回退点阵3x） */
|
||
if (mfont_ready) {
|
||
meow_font_drawtext((uint16_t *)fb, 24, 48, "MeowOS 应用", rgb565(0xFFE066), 28);
|
||
fill_rect(0, 48 + meow_font_line_height(28) + 2, fb_xres, 2, 0x3A3A5C);
|
||
} else {
|
||
draw_text(24, 28, "MEOWAPPS", 3, 0xFFE066);
|
||
fill_rect(0, 56, fb_xres, 2, 0x3A3A5C);
|
||
}
|
||
}
|
||
|
||
/* Refresh ONLY the clock digits (top-left, HH:MM:SS) once per second — the one
|
||
* status-bar value that changes every second. This is what makes the "clock
|
||
* updates every second" work WITHOUT redrawing (or tearing) the app list, and
|
||
* WITHOUT the slow amixer popen that a full draw_statusbar() would incur on
|
||
* each tick. Everything else (battery/wifi/bluetooth/volume) changes only on
|
||
* user input, which triggers a full draw_menu via the dirty flag. Clears a
|
||
* small box then redraws the time, so old digits do not ghost. */
|
||
static void draw_clock(void)
|
||
{
|
||
paint_sb_clock(); /* M2.16：本地重画时钟格（每秒），只动这个矩形 */
|
||
}
|
||
|
||
/* M2.36 右向小箭头（进入/下拉提示）。点阵后备字库（5x7）缺 '>' 字形（glyph_index 落到空
|
||
* 格），故用像素画一个 4x7 的 '>'；顶点在 (x,y) 指向右。设置页选择器/设置项行复用。 */
|
||
static void s_draw_chevron(int x, int y, uint32_t color)
|
||
{
|
||
for (int i = 0; i < 4; i++) {
|
||
put_px(x - i, y - i, color);
|
||
put_px(x - i, y + i, color);
|
||
}
|
||
}
|
||
|
||
/* M2.39 左向小箭头（返回提示）。点阵后备字库同样缺 '<' 字形（'‹' 会渲染成方框），
|
||
* 故用像素画一个指向左的 4x7 '<'；顶点在 (x,y)。设置页底部「返回」/任何左向提示复用。 */
|
||
static void s_draw_chevron_left(int x, int y, uint32_t color)
|
||
{
|
||
for (int i = 0; i < 4; i++) {
|
||
put_px(x + i, y - i, color);
|
||
put_px(x + i, y + i, color);
|
||
}
|
||
}
|
||
|
||
static void draw_menu(struct app apps[MAX_APPS], int napps, int state,
|
||
int cursor, int toast_ms, const char *toast)
|
||
{
|
||
fill_rect(0, 0, fb_xres, fb_yres, menu_bg);
|
||
draw_header_content();
|
||
|
||
char line[64];
|
||
int y = ROW_TOP;
|
||
if (state == 1) {
|
||
if (mfont_ready) { ui_draw(30, 200, "没有存储卡", 0xFFFFFF, 20); ui_draw(30, 234, "请插入TF卡后重开菜单", 0x9FB8D9, 20); }
|
||
else { draw_text(30, 200, "NO STORAGE CARD", 2, 0xFFFFFF); draw_text(30, 240, "INSERT TF CARD", 2, 0x9FB8D9); draw_text(30, 272, "THEN RE-OPEN MENU", 2, 0x9FB8D9); }
|
||
} else if (state == 2 || napps == 0) {
|
||
if (mfont_ready) { ui_draw(30, 200, "没有找到应用", 0xFFFFFF, 20); ui_draw(30, 234, "请放入应用到", 0x9FB8D9, 20); ui_draw(30, 268, "MeowAPPs/<id>/app.json", 0x9FB8D9, 20); }
|
||
else { draw_text(30, 200, "NO APPS FOUND", 2, 0xFFFFFF); draw_text(30, 240, "PUT APP IN", 2, 0x9FB8D9); draw_text(30, 272, "MeowAPPs/<id>/app.json", 2, 0x9FB8D9); }
|
||
} else {
|
||
for (int i = 0; i < napps; i++) {
|
||
int sel = (i == cursor);
|
||
if (sel) {
|
||
fill_rect(8, y - 4, fb_xres - 16, ROW_H - 8, 0x2A3A6A);
|
||
snprintf(line, sizeof line, "%d %s", i + 1, apps[i].name);
|
||
ui_draw(24, y, line, 0xFFFFFF, 20);
|
||
if (!apps[i].ok) ui_draw(24, y + ROW_H - 24, "[缺失]", 0xFF6B6B, 20);
|
||
} else {
|
||
snprintf(line, sizeof line, "%d %s", i + 1, apps[i].name);
|
||
ui_draw(24, y, line, 0xC8D0E8, 20);
|
||
if (!apps[i].ok) ui_draw(24, y + ROW_H - 24, "[缺失]", 0x8A4A4A, 20);
|
||
}
|
||
y += ROW_H;
|
||
}
|
||
}
|
||
|
||
/* M2.36 B2b：系统设置 builtin 行（过渡入口）。位于应用项之后、Exit 行之前；
|
||
* 不依赖 .mpk（图标/文案就地绘制）。音量导航可把光标移到此处（cursor==napps），
|
||
* 触摸点击该行进入设置页（run_menu 分发到 run_settings_page）。 */
|
||
{
|
||
int sy = EXIT_ROW - ROW_H; /* 固定在 Exit 行上方 588 */
|
||
int selset = (cursor == napps); /* 光标已移到设置行 */
|
||
fill_rect(8, sy - 4, fb_xres - 16, ROW_H - 8, selset ? 0x2A3A6A : 0x12142A);
|
||
if (mfont_ready) ui_draw(24, sy, "系统设置", selset ? 0xFFFFFF : 0xC8D0E8, 20);
|
||
else draw_text(24, sy, "SETTINGS", 2, selset ? 0xFFFFFF : 0xC8D0E8);
|
||
s_draw_chevron(fb_xres - 22, sy + ROW_H / 2, 0x9FB8D9); /* 右向进入提示 */
|
||
}
|
||
|
||
/* exit row */
|
||
fill_rect(8, EXIT_ROW - 4, fb_xres - 16, ROW_H - 8, 0x1A1A3A);
|
||
/* M2.2/M2.6：MeowOS 常驻主界面（播放器已死）时改「重启返回播放器」。 */
|
||
if (mfont_ready) ui_draw(24, EXIT_ROW, meow_mode ? "重启返回播放器" : "返回播放器", 0x8FBFD9, 20);
|
||
else draw_text(24, EXIT_ROW, meow_mode ? "REBOOT TO PLAYER" : "BACK TO PLAYER", 2, 0x8FBFD9);
|
||
|
||
/* M2.18 Bug 3: 底部对齐，弃用硬编码 y=700。屏幕高 fb_yres=720，字号 20 真实行高
|
||
* meow_font_line_height(20)=27（ascent 21 + descent 6）；原 y=700 使字底 = 700+27 = 727
|
||
* > 720，溢出 7px ≈ 1/5 字符高被裁。改为 y = fb_yres - 行高 - 底部留白。非 mfont 回退
|
||
* 分支（5x7 点阵，字高=7*scale）同样底部对齐，两分支都处理。 */
|
||
#define FOOTY_PAD 8
|
||
/* dev version, bottom-right: single source MEOWOS_VERSION. */
|
||
{
|
||
char ver[32];
|
||
snprintf(ver, sizeof ver, "MeowOS v%s dev", g_meowos_version);
|
||
int foot_y = fb_yres - meow_font_line_height(20) - FOOTY_PAD;
|
||
ui_draw(fb_xres - 8 - ui_width(ver, 20), foot_y, ver, 0x666688, 20);
|
||
}
|
||
|
||
if (toast_ms > 0 && toast && toast[0]) {
|
||
fill_rect(20, TOAST_Y - 6, fb_xres - 40, 40, 0x2A0A0A);
|
||
ui_draw(30, TOAST_Y, toast, 0xFF8080, 20);
|
||
}
|
||
}
|
||
|
||
/* ================================================================== */
|
||
/* M2.3A 电源菜单（Android 11 样式）：长按电源 3s 弹出；8s 强制关机 */
|
||
/* 半透明深色遮罩 + 居中 5 个大按钮（2 列×3 行，ASCII 点阵，不耦合字体） */
|
||
/* 与「单击=息屏」「电源+音量减=切MeowOS」按电源按住时长区分。 */
|
||
/* ================================================================== */
|
||
/* M2.3A sim 钩子（电源菜单验证，物理留用户）：
|
||
* --sim-power-hold N —— 主循环 N ms 后强制 pwr=1（模拟按住电源），驱动
|
||
* 3s 弹电源菜单 / 8s 强制关机两条路径。
|
||
* --sim-power-pick N —— 电源菜单打开 2s 后自动选中按钮 N（0..4；M2.29 起 5 钮）。
|
||
* --sim-no-exec —— 免执行：电源动作(关机/重启/回HibyOS)/8s强关仅打 log，
|
||
* 不真正 poweroff/reboot（安全 sim 用）。 */
|
||
static long sim_power_hold_ms = 0;
|
||
static int sim_power_pick = -1;
|
||
static int sim_no_exec = 0;
|
||
|
||
#define PM_NUM 5
|
||
/* M2.31 电源菜单 Android12(MD3) 圆钮：正中间圆角卡片 + 每行 2 个大圆钮 + 换行居中。
|
||
* 5 钮 → 2 列×3 行（行3=取消，单钮居中，默认选中安全项）。
|
||
* PM_R 半径50(直径100)，行距 PM_GAPY=140、圆心距 PM_GAPX=130 保证圆下 label 不被下一行圆压住；
|
||
* 卡片 40..440 / 115..620 居中放置。 */
|
||
#define PM_R 50 /* 圆钮半径（直径 100） */
|
||
#define PM_GAPX 130 /* 两列圆心 x 间距（175->305，居中 240） */
|
||
#define PM_GAPY 140 /* 相邻行圆心 y 间距 */
|
||
#define PM_CARD_X0 40 /* 圆角卡片左 */
|
||
#define PM_CARD_W 400 /* 圆角卡片宽（40..440，居中） */
|
||
#define PM_CARD_CX (PM_CARD_X0 + PM_CARD_W / 2) /* 卡片水平中心 240 */
|
||
#define PM_CARD_Y0 115 /* 圆角卡片顶 */
|
||
#define PM_CARD_H 505 /* 圆角卡片高（115..620） */
|
||
#define PM_CARD_R 26 /* 圆角卡片圆角 */
|
||
static const int pm_cx[PM_NUM] = { PM_CARD_CX - PM_GAPX / 2, PM_CARD_CX + PM_GAPX / 2,
|
||
PM_CARD_CX - PM_GAPX / 2, PM_CARD_CX + PM_GAPX / 2, PM_CARD_CX };
|
||
static const int pm_cy[PM_NUM] = { 250, 250, 390, 390, 530 }; /* 圆心 y（行距 140） */
|
||
static const char *pm_labels_cn[PM_NUM] = { "关机", "重启", "回HiBy", "升级", "取消" };
|
||
static const char *pm_labels_en[PM_NUM] = { "POWER OFF", "RESTART", "HIBYOS", "UPGRADE", "CANCEL" };
|
||
|
||
static void fill_circle(int cx, int cy, int r, uint32_t color)
|
||
{
|
||
for (int dy = -r; dy <= r; dy++)
|
||
for (int dx = -r; dx <= r; dx++)
|
||
if (dx * dx + dy * dy <= r * r)
|
||
put_px(cx + dx, cy + dy, color);
|
||
}
|
||
|
||
/* 圆角矩形 */
|
||
static void fill_round_rect(int x0, int y0, int w, int h, int r, uint32_t color)
|
||
{
|
||
fill_rect(x0 + r, y0, w - 2 * r, h, color);
|
||
fill_rect(x0, y0 + r, w, h - 2 * r, color);
|
||
fill_circle(x0 + r, y0 + r, r, color);
|
||
fill_circle(x0 + w - r, y0 + r, r, color);
|
||
fill_circle(x0 + r, y0 + h - r, r, color);
|
||
fill_circle(x0 + w - r, y0 + h - r, r, color);
|
||
}
|
||
|
||
/* 电源菜单圆钮图标：从 pm_icons.h 的 56×56 alpha 位图 blit 到 fb（以圆钮中心 cx,cy 为锚居中）。
|
||
* alpha 按 col（RGB565）映射：图标前景色随选中/未选中主题色变化（日夜间由 pm_theme_* 提供）。
|
||
* dst_px 为 fb16bpp 写入：新像素 = col 前景与背景(btn bg)按 alpha 混合。 */
|
||
static void blit_pm_icon(int idx, int cx, int cy, uint16_t col)
|
||
{
|
||
const unsigned char *src = pm_icons[idx].data;
|
||
int S = PM_ICON_SIZE;
|
||
int x0 = cx - S / 2, y0 = cy - S / 2;
|
||
for (int y = 0; y < S; y++) {
|
||
int yy = y0 + y;
|
||
if (yy < 0 || yy >= fb_yres) continue;
|
||
uint16_t *row = (uint16_t *)fb + yy * (fb_line / 2);
|
||
for (int x = 0; x < S; x++) {
|
||
int a = src[y * S + x];
|
||
if (a < 8) continue; /* 透明像素跳过 */
|
||
int xx = x0 + x;
|
||
if (xx < 0 || xx >= fb_xres) continue;
|
||
/* 前景 col 已含所需亮度；此处仅做软边 alpha 混合到背景，避免锯齿 */
|
||
uint16_t bg = row[xx];
|
||
if (a >= 240) { row[xx] = col; continue; }
|
||
int a4 = a >> 4; /* 0..15 */
|
||
int r = ((col >> 11) * a4 + ((bg >> 11) & 0x1F) * (16 - a4)) >> 4;
|
||
int g = (((col >> 5) & 0x3F) * a4 + ((bg >> 5) & 0x3F) * (16 - a4)) >> 4;
|
||
int b = ((col & 0x1F) * a4 + (bg & 0x1F) * (16 - a4)) >> 4;
|
||
row[xx] = (uint16_t)((r << 11) | (g << 5) | b);
|
||
}
|
||
}
|
||
}
|
||
|
||
/* 绘制电源菜单圆钮 i（MD3 圆形：外描边+内填充+圆内 Material 图标；选中高亮）。
|
||
* 圆内放 Material Symbols 位图，文字标签放圆下（Android 12 式：icon 上、label 下）。 */
|
||
static void draw_pm_button(int i, int selected)
|
||
{
|
||
int cx = pm_cx[i], cy = pm_cy[i];
|
||
/* 主题（日夜间由 pm_theme_* 决定；默认取 dark，后续接设置） */
|
||
const pm_theme_t *th = &pm_theme_dark;
|
||
/* 先铺一块比任何选中圈都大的卡片底色圆，盖掉上一态残留的选中描边（问题3：
|
||
* 焦点移走后 PM_R+2..PM_R+6 之间残留亮圈。以 0x1C2438 卡片色清底）。 */
|
||
fill_circle(cx, cy, PM_R + 10, 0x1C2438);
|
||
/* MD3 无边框高亮：选中=未选中底色稍亮填充（无描边圈），仅底色区分焦点；避免圆形描边残留。 */
|
||
if (selected)
|
||
fill_circle(cx, cy, PM_R, th->btn_sel_bg);
|
||
else
|
||
fill_circle(cx, cy, PM_R, th->btn_nor_bg);
|
||
/* 圆内 Material 图标（alpha 位图 + 主题前景色） */
|
||
blit_pm_icon(i, cx, cy, selected ? th->icon_sel : th->icon_nor);
|
||
uint32_t col = selected ? 0xFFFFFF : 0xC8D0E8;
|
||
/* 圆下文字标签（真字体/中文 或 点阵 ASCII 回退） */
|
||
int ly = cy + PM_R + 8;
|
||
if (mfont_ready) {
|
||
const char *lab = pm_labels_cn[i];
|
||
int lw = meow_font_width_text(lab, 18);
|
||
meow_font_drawtext((uint16_t *)fb, cx - lw / 2, ly, lab, rgb565(col), 18);
|
||
} else {
|
||
const char *lab = pm_labels_en[i];
|
||
int lw = (int)strlen(lab) * 5;
|
||
draw_text(cx - lw / 2, ly + 1, lab, 1, col);
|
||
}
|
||
}
|
||
|
||
/* 把当前显示 buffer（buffer0）逐像素压暗（半透明遮罩模拟） */
|
||
static void dim_screen(void)
|
||
{
|
||
for (int y = 0; y < fb_yres; y++) {
|
||
unsigned char *row = fb + (size_t)y * fb_line;
|
||
for (int x = 0; x < fb_xres; x++) {
|
||
unsigned char *p = row + x * (fb_bpp / 8);
|
||
if (fb_bpp == 16) {
|
||
uint16_t c = *(uint16_t *)p;
|
||
int r = (((c >> 11) & 0x1F) * 3) / 5;
|
||
int g = (((c >> 5) & 0x3F) * 3) / 5;
|
||
int b = ((c & 0x1F) * 3) / 5;
|
||
*(uint16_t *)p = (uint16_t)((r << 11) | (g << 5) | b);
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
/* A-0：电源菜单背景 = app 当前帧。从 fb0 buffer0（yoffset=0，app 永不 pan）读回 app
|
||
* SIGSTOP 后的最后一帧 → back_buf，再经 dim_screen 压暗作菜单背景，替代旧的「压暗
|
||
* launcher 应用列表底」（Bug：应用内长按电源，背景错显示成应用列表）。
|
||
* 参考 fb_backup_player 的读回思路，但目标是 app 帧而非播放器帧（播放器帧在其自身
|
||
* yoffset，app 帧固定 buffer0）。MeowOS 主界面（无 app 运行）时 buffer0 = launcher
|
||
* 列表帧，读回即现有「压暗列表底」效果，无回归。 */
|
||
static void pm_capture_app_frame(void)
|
||
{
|
||
if (!fb_mem || !back_buf_ok || !fb) return; /* 无真实 fb / 直写模式：维持现状 */
|
||
memcpy(fb, fb_mem, (size_t)fb_line * (size_t)fb_yres); /* fb = SDK back_buf */
|
||
meow_dirty_full(); /* 新背景整帧呈现 */
|
||
logmsg("pm: menu bg = app frame (fb0 buffer0)");
|
||
}
|
||
|
||
/* Bug 2 修复：直连 reboot(2) syscall。M2.6 用 system("... reboot"/"poweroff") 经 BusyBox
|
||
* 不生效（设备实测：动作日志打了但不起机/不关机——BusyBox reboot 非 PID1 时依赖 init 上的
|
||
* 信号/teinit 握手，本设备不完成；且 system() fork+sh 有竞态）。改为直接 syscall 绕过
|
||
* /bin/sh 与 init：sync() 后调用 reboot(2)，内核立即重启/关机。 */
|
||
#define LINUX_REBOOT_MAGIC1 0xfee1dead
|
||
#define LINUX_REBOOT_MAGIC2 672274793 /* 0x28121969 */
|
||
#define LINUX_REBOOT_CMD_RESTART 0x01234567
|
||
#define LINUX_REBOOT_CMD_POWER_OFF 0x4321fedc
|
||
static void sys_do_reboot(int cmd)
|
||
{
|
||
/* M2a：正常电源事件（关机/重启）触发清除板载通知数据之前，先转储所有未上卡通知
|
||
* （NOTIFICATION_SYSTEM.md §8）。meow_notif_before_poweroff 幂等安全（未 init 直接返回）。 */
|
||
meow_notif_before_poweroff();
|
||
sync(); /* 先落盘，避免数据丢失 */
|
||
logmsg("sys_do_reboot cmd=0x%x", cmd);
|
||
syscall(SYS_reboot, LINUX_REBOOT_MAGIC1, LINUX_REBOOT_MAGIC2, cmd, NULL);
|
||
logmsg("sys_do_reboot returned: %s", strerror(errno)); /* 正常不会返回 */
|
||
for (;;) usleep(1000); /* 防御：永不返回 */
|
||
}
|
||
|
||
/* 回HibyOS：写板载 /data/meow_boot_default=1（开机默认权威标记，O_TRUNC 单值、不写 TF 卡），
|
||
* 再 reboot 回选单并默认 HibyOS。meow.conf 不再写/承载 boot_default（bootmenu 以板载标记为准）。 */
|
||
static void set_boot_default_hiby(void)
|
||
{
|
||
int fd = open("/data/meow_boot_default", O_WRONLY | O_CREAT | O_TRUNC, 0644);
|
||
if (fd >= 0) { write(fd, "1\n", 2); close(fd); logmsg("pm: /data/meow_boot_default=1"); }
|
||
}
|
||
|
||
/* 电源菜单（M2.6）：2×2 网格，dirty 绘制消频闪；输入修复：
|
||
* - 触摸按下捕获坐标、抬起命中按钮即确认（同 run_menu MT 防抖）；
|
||
* - 音量上/下导航；播放=确认；电源新按（松开长按后）＝确认当前钮（非取消）；
|
||
* - 取消=选「取消」钮；8s 持续按住=强制关机（绕过）。
|
||
* 返回 1=采取动作，0=取消。 */
|
||
static int show_power_menu(void)
|
||
{
|
||
int fbfd = open(FB_DEV, O_RDWR);
|
||
if (fbfd >= 0) { ioctl(fbfd, FBIOBLANK, 0); close(fbfd); } /* 亮起面板 */
|
||
pm_capture_app_frame(); /* A-0：菜单背景 = app 当前帧（fb0 buffer0），再压暗绘制其上 */
|
||
dim_screen();
|
||
/* M2.8 Bug 3-residual：若电源菜单是在「息屏」态打开（按住 3s），此处 FBIOBLANK(0)
|
||
* 刚上电，LCDC 扫描地址可能非 buffer0；强制 re-pan 让压暗的应用列表 + 菜单落在被显示的
|
||
* 缓冲，否则菜单画在非显示缓冲上不可见。 */
|
||
fb_pan_buf0_force();
|
||
meow_screen_on = 1; /* 菜单打开即视为亮屏 */
|
||
|
||
/* M2.11 B：默认光标 = 「取消」（安全项，index 4）。用户打开菜单后未导航就按电源/播放，
|
||
* 只会取消关菜单，绝不因「按电源键」本身关机/重启。要真关机必须先导航到「关机」再确认。 */
|
||
int sel = PM_NUM - 1; /* 默认取消（安全） */
|
||
/* M2.30 MD3：居中圆角卡片背景 + 标题居中 + 圆钮网格。卡片白色柔和描边/深色底。 */
|
||
fill_round_rect(PM_CARD_X0, PM_CARD_Y0, PM_CARD_W, PM_CARD_H, PM_CARD_R, 0x141824);
|
||
fill_round_rect(PM_CARD_X0 + 2, PM_CARD_Y0 + 2, PM_CARD_W - 4, PM_CARD_H - 4, PM_CARD_R - 2, 0x1C2438);
|
||
/* 卡片顶部标题，水平居中 */
|
||
char title[32];
|
||
snprintf(title, sizeof title, "POWER MENU");
|
||
int title_y = PM_CARD_Y0 + 26; /* 标题在卡片内顶部（卡片顶 115，标题基线 ~141） */
|
||
if (mfont_ready) meow_font_drawtext((uint16_t *)fb, (fb_xres - meow_font_width_text(title, 20)) / 2, title_y, title, rgb565(0xFFFFFF), 20);
|
||
else draw_text((fb_xres - (int)strlen(title) * 6) / 2, title_y, title, 2, 0xFFFFFF);
|
||
/* 底部提示行（卡片下方，非圆钮所需） */
|
||
int hint_y = PM_CARD_Y0 + PM_CARD_H + 10;
|
||
if (mfont_ready) meow_font_drawtext((uint16_t *)fb, (fb_xres - meow_font_width_text("音量导航 电源确认", 18)) / 2, hint_y, "音量导航 电源确认", rgb565(0x777799), 18);
|
||
else draw_text((fb_xres - (int)strlen("VOLUME NAV POWER OK") * 5) / 2, hint_y + 1, "VOLUME NAV POWER OK", 1, 0x777799);
|
||
meow_dirty_full(); /* M2.16：把压暗列表+卡片+标题+（下方圆钮）作为一整帧呈现 */
|
||
|
||
/* 触摸状态（按下→抬起）：统一 meow_touch 接口（goodix 时序免疫，原点由首个有效 ABS 锁） */
|
||
meow_touch mt;
|
||
mt_reset(&mt);
|
||
int tfd = open(DEV_TOUCH, O_RDONLY | O_NONBLOCK);
|
||
|
||
struct keypoll kp_power, kp_keys;
|
||
kp_open(&kp_power, DEV_POWER);
|
||
kp_open(&kp_keys, DEV_KEYS);
|
||
int prev_vold = 0, prev_volu = 0, prev_play = 0, prev_pwr = 0;
|
||
kp_poll(&kp_power, NULL, NULL); kp_poll(&kp_keys, NULL, NULL);
|
||
prev_pwr = kp_is_down(&kp_power, KEY_POWER) ? 1 : 0;
|
||
prev_vold = kp_is_down(&kp_keys, KEY_VOLUMEDOWN) ? 1 : 0;
|
||
prev_volu = kp_is_down(&kp_keys, KEY_VOLUMEUP) ? 1 : 0;
|
||
prev_play = kp_is_down(&kp_keys, KEY_PLAYPAUSE) ? 1 : 0;
|
||
|
||
int act = -1;
|
||
unsigned long long pm_t0 = now_ms();
|
||
unsigned long long pm_last_interact = pm_t0; /* M2.33：菜单空闲自动关闭基准（任何互动刷新） */
|
||
int pm_init = 0, last_sel = -1;
|
||
/* M2.10 Bug：电源菜单 8s 强关（按住电源≥8s=绕过强关）会覆盖用户的菜单操作 —— 用户按住
|
||
* 电源打开菜单后（尤其仍按着电源）点选「回到HibyOS/重启」等按钮，8s 一到先触发强关 → 关机
|
||
* 而非执行所选动作。修法：一旦用户与菜单互动（音量导航/触摸/播放/电源确认），置 pm_interacted=1
|
||
* 取消 8s 强关，让所选动作（如「回到HibyOS」→ reboot RESTART）生效。仅当全程未互动才保留「按住
|
||
* 8s=强关」。*/
|
||
int pm_interacted = 0;
|
||
for (;;) {
|
||
/* dirty 绘制：首次全画；此后仅选中变化才重画受影响两钮（消频闪）→ 标脏 + present。 */
|
||
if (!pm_init) {
|
||
for (int i = 0; i < PM_NUM; i++) draw_pm_button(i, i == sel);
|
||
pm_init = 1; last_sel = sel;
|
||
meow_ui_flush(); /* A-1/A-2：SDK present（vsync+帧率门控+blit 脏=全帧，含压暗列表+标题+按钮） */
|
||
} else if (sel != last_sel) {
|
||
draw_pm_button(last_sel, 0);
|
||
draw_pm_button(sel, 1);
|
||
/* M2.30 圆形：dirty 区 = 圆（圆心±半径）+ 圆下文字（半径+偏移+行高），四周留 10px */
|
||
int dr = (PM_R + 6) + 10, dtxt = PM_R + 26 + 10;
|
||
meow_dirty_add(pm_cx[last_sel] - dr, pm_cy[last_sel] - dr, dr * 2, dr + dtxt);
|
||
meow_dirty_add(pm_cx[sel] - dr, pm_cy[sel] - dr, dr * 2, dr + dtxt);
|
||
last_sel = sel;
|
||
meow_ui_flush(); /* A-1/A-2：SDK present，blit 两钮区 */
|
||
}
|
||
|
||
if (sim_power_pick >= 0 && now_ms() - pm_t0 >= 2000) act = sim_power_pick;
|
||
|
||
int vold = 0, volu = 0, play = 0, pwr = 0;
|
||
if (kp_keys.ok) { kp_poll(&kp_keys, NULL, NULL);
|
||
vold = kp_is_down(&kp_keys, KEY_VOLUMEDOWN);
|
||
volu = kp_is_down(&kp_keys, KEY_VOLUMEUP);
|
||
play = kp_is_down(&kp_keys, KEY_PLAYPAUSE); }
|
||
if (kp_power.ok) { kp_poll(&kp_power, NULL, NULL); pwr = kp_is_down(&kp_power, KEY_POWER); }
|
||
|
||
if (vold && !prev_vold) { sel = (sel + 1) % PM_NUM; pm_interacted = 1; pm_last_interact = now_ms(); }
|
||
if (volu && !prev_volu) { sel = (sel - 1 + PM_NUM) % PM_NUM; pm_interacted = 1; pm_last_interact = now_ms(); }
|
||
/* M2.19：播放键不再作确认（让位给全局媒体控制）。电源菜单的物理确认
|
||
* 已由电源键负责（下行），播放键删除，重复确认移除。 */
|
||
(void)play;
|
||
if (pwr && !prev_pwr) { act = sel; pm_interacted = 1; pm_last_interact = now_ms(); } /* 电源新按=确认（非取消） */
|
||
prev_vold = vold; prev_volu = volu; prev_play = play; prev_pwr = pwr;
|
||
|
||
/* 触摸：按下（meow_touch 原点锁定，goodix 时序免疫），抬起按按钮命中确认 */
|
||
if (tfd >= 0) {
|
||
struct pollfd pfd = { tfd, POLLIN, 0 };
|
||
if (poll(&pfd, 1, 0) > 0) {
|
||
unsigned char ev[16];
|
||
while (read(tfd, ev, sizeof ev) == (ssize_t)sizeof ev) {
|
||
uint16_t type = *(uint16_t *)(ev + 8), code = *(uint16_t *)(ev + 10);
|
||
int32_t val = *(int32_t *)(ev + 12);
|
||
if (type == EV_ABS) {
|
||
if (code == ABS_X || code == ABS_MT_POSITION_X) mt_abs(&mt, val, mt.last_y);
|
||
else if (code == ABS_Y || code == ABS_MT_POSITION_Y) mt_abs(&mt, mt.last_x, val);
|
||
} else if (type == EV_KEY && code == BTN_TOUCH) {
|
||
if (val && !mt.down) {
|
||
mt_down(&mt);
|
||
pm_interacted = 1;
|
||
pm_last_interact = now_ms();
|
||
} else if (!val && mt.down) {
|
||
pm_interacted = 1;
|
||
pm_last_interact = now_ms();
|
||
int dx, dy;
|
||
/* M2.25：抬手位移 >= MEOW_TOUCH_SWIPE_THRESH 判滑动（返回0），
|
||
* 不做确认；否则有效 tap，按下原点命中的按钮即确认。 */
|
||
if (mt_up(&mt, &dx, &dy)) {
|
||
/* M2.30 圆形命中：按下原点距圆心 <= PM_R+6 即命中 */
|
||
for (int i = 0; i < PM_NUM; i++) {
|
||
int ddx = mt.down_x - pm_cx[i], ddy = mt.down_y - pm_cy[i];
|
||
int rr = (PM_R + 6) * (PM_R + 6);
|
||
if (ddx * ddx + ddy * ddy <= rr) { sel = i; act = i; break; }
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
/* 8s 强关（绕过）：仅当电源持续按住、且用户全程未与菜单互动才触发 —— 放在触摸/按键处理
|
||
* 之后，避免「用户已点选按钮」的同一轮被强关抢先（M2.10 Bug）。 */
|
||
if (pwr && !pm_interacted && now_ms() - pm_t0 >= 5000) {
|
||
if (sim_no_exec) { logmsg("pm: [sim-no-exec] POWER HOLD 8s -> would force poweroff"); }
|
||
else { logmsg("pm: POWER HOLD 8s -> force poweroff"); sys_do_reboot(LINUX_REBOOT_CMD_POWER_OFF); }
|
||
return 1;
|
||
}
|
||
|
||
/* M2.33 菜单空闲超时自动关闭：菜单受 MeowOS screen_off_timeout 管理（系统界面不豁免）。
|
||
* 超过超时无任何互动 → 关闭菜单（视为取消）并自动息屏。目的是：息屏后单击电源亮屏时，
|
||
* 电源按下信号不会命中菜单按钮（菜单已关），杜绝误触关机/执行菜单动作。 */
|
||
if (screen_off_timeout > 0 &&
|
||
(unsigned long long)(now_ms() - pm_last_interact) >= (unsigned long long)screen_off_timeout * 1000) {
|
||
logmsg("pm: idle %ds -> close menu + auto screen-off (act=cancel)", screen_off_timeout);
|
||
meow_panel_off();
|
||
meow_auto_slept = 1;
|
||
act = 4; /* 取消（关菜单） */
|
||
break;
|
||
}
|
||
|
||
if (act >= 0) break;
|
||
usleep(POLL_MS * 1000);
|
||
}
|
||
if (tfd >= 0) close(tfd);
|
||
|
||
/* M2.11 B：电源键在菜单 = 按当前项确认。act 与 syscall 类型逐项核对：
|
||
* act==4(取消) -> 只关菜单，绝不关机（return 0，永不到 reboot）；
|
||
* act==0(关机) -> 才 poweroff；act==1(重启)/act==2(回HibyOS)/act==3(升级模式) -> 才 reboot。
|
||
* 只有 act 为 0/1/2/3 才可能执行 sys_do_reboot；power 键本身绝不触发关机。 */
|
||
logmsg("pm: act=%d -> %s", act,
|
||
act == 0 ? "关机" : act == 1 ? "重启" : act == 2 ? "回HibyOS" : act == 3 ? "升级模式" : "取消");
|
||
if (act == 4) { logmsg("pm: cancel (close menu only)"); return 0; }
|
||
if (act == 0) {
|
||
logmsg("pm: POWER OFF");
|
||
if (!sim_no_exec) {
|
||
/* 先显关机 logo（cmd_jpeg_display 是独立二进制，能正常显图），再直连 poweroff */
|
||
system("PATH=/bin:/sbin:/usr/bin:/usr/sbin cmd_jpeg_display /etc/shutdown_logo.jpeg >/dev/null 2>&1");
|
||
sys_do_reboot(LINUX_REBOOT_CMD_POWER_OFF);
|
||
}
|
||
} else if (act == 1) {
|
||
logmsg("pm: REBOOT");
|
||
if (!sim_no_exec) sys_do_reboot(LINUX_REBOOT_CMD_RESTART);
|
||
} else if (act == 2) {
|
||
logmsg("pm: RETURN TO HIBYOS");
|
||
set_boot_default_hiby();
|
||
if (!sim_no_exec) sys_do_reboot(LINUX_REBOOT_CMD_RESTART);
|
||
} else if (act == 3) {
|
||
/* M2.29 升级模式：写 mtd5=ota:kernel2（bootmode.sh Recovery = flash_erase + nandwrite）
|
||
* 再 reboot —— uboot 读 mtd5=ota:kernel2 引导 kernel2（升级模式，自动刷 TF 卡
|
||
* r3proii.upt，双进度条，跑完重启进新固件）。已验证此链路可靠。 */
|
||
logmsg("pm: ENTER UPGRADE");
|
||
if (!sim_no_exec) {
|
||
system("PATH=/bin:/sbin:/usr/bin:/usr/sbin /usr/bin/bootmode.sh Recovery >/dev/null 2>&1");
|
||
sys_do_reboot(LINUX_REBOOT_CMD_RESTART);
|
||
}
|
||
}
|
||
return 1;
|
||
}
|
||
|
||
/* M2.6 G「Reboot to player」：MeowOS 常驻模式点「返回播放器」时，播放器已死，弹确认框
|
||
* 「返回播放器需重启，现在重启？[是/否]」。是=写选单默认 HibyOS + reboot；否=留在 MeowOS。
|
||
* VOL=是/否 切换；PLAY=确认；POWER=取消；触摸点 是/否 确认。风格同电源菜单。
|
||
* 返回 1=是(已 reboot，通常不回)，0=否/取消(调用方重绘应用列表)。 */
|
||
/* 「返回播放器」确认框「是/否」按钮（左右），选中高亮。
|
||
* M2.9 Bug 4：改为 dirty 绘制 —— 仅 sel 变化时重画两钮（旧钮取消高亮 + 新钮高亮），
|
||
* 不随主循环每 10ms 全刷（原实现每帧重画同一内容，与 LCD 刷新竞争产生频闪）。 */
|
||
static void draw_cr_button(int sel, int i)
|
||
{
|
||
int x0 = (i == 0) ? 80 : 280, y0 = 420, w = 120, h = 60;
|
||
fill_round_rect(x0, y0, w, h, 12, (i == sel) ? 0x2A3A6A : 0x1A1A2A);
|
||
const char *lbl = (i == 0) ? "是" : "否";
|
||
if (mfont_ready) {
|
||
int lw = meow_font_width_text(lbl, 20);
|
||
meow_font_drawtext((uint16_t *)fb, x0 + w / 2 - lw / 2, y0 + 30 - meow_font_line_height(20) / 2,
|
||
lbl, rgb565((i == sel) ? 0xFFFFFF : 0xC8D0E8), 20);
|
||
} else {
|
||
draw_text(x0 + w / 2 - 6, y0 + 24, (i == 0) ? "YES" : "NO", 2, (i == sel) ? 0xFFFFFF : 0xC8D0E8);
|
||
}
|
||
}
|
||
|
||
static int confirm_reboot_player(void)
|
||
{
|
||
dim_screen();
|
||
/* M2.8 Bug 3-residual：确认框同电源菜单 —— 若打开前刚经历息屏/blank，LCDC 扫描地址可能
|
||
* 非 buffer0；强制 re-pan 让「压暗列表 + 是/否」落在被显示的缓冲。 */
|
||
fb_pan_buf0_force();
|
||
if (mfont_ready) meow_font_drawtext((uint16_t *)fb, 20, 320, "返回播放器需重启，现在重启？", rgb565(0xFFFFFF), 20);
|
||
else draw_text(20, 322, "REBOOT TO RETURN TO PLAYER?", 2, 0xFFFFFF);
|
||
|
||
meow_touch mt;
|
||
mt_reset(&mt);
|
||
int tfd = open(DEV_TOUCH, O_RDONLY | O_NONBLOCK);
|
||
struct keypoll kp_power, kp_keys;
|
||
kp_open(&kp_power, DEV_POWER);
|
||
kp_open(&kp_keys, DEV_KEYS);
|
||
int prev_vold = 0, prev_volu = 0, prev_play = 0, prev_pwr = 0;
|
||
kp_poll(&kp_power, NULL, NULL); kp_poll(&kp_keys, NULL, NULL);
|
||
prev_pwr = kp_is_down(&kp_power, KEY_POWER) ? 1 : 0;
|
||
prev_vold = kp_is_down(&kp_keys, KEY_VOLUMEDOWN) ? 1 : 0;
|
||
prev_volu = kp_is_down(&kp_keys, KEY_VOLUMEUP) ? 1 : 0;
|
||
prev_play = kp_is_down(&kp_keys, KEY_PLAYPAUSE) ? 1 : 0;
|
||
|
||
int sel = 1; /* 默认「否」：不误重启 */
|
||
int act = -1;
|
||
int cr_init = 0, cr_last_sel = -1; /* M2.9 Bug 4：dirty——仅 sel 变化才重画两钮 */
|
||
/* 标题/按键提示：打开时画一次（原实现把它们放主循环每 10ms 全刷，与 LCD 刷新竞争 →
|
||
* 「是/否」钮频闪；改为只在打开/状态变化时绘制）。标题在前面已画一次，这里画提示行。 */
|
||
if (mfont_ready) meow_font_drawtext((uint16_t *)fb, 20, 560, "音量切换 电源取消", rgb565(0x666688), 20);
|
||
else draw_text(20, 562, "VOL NAV POWER EXIT", 1, 0x666688);
|
||
meow_dirty_full(); /* M2.16：压暗列表+标题+提示作为一整帧呈现 */
|
||
for (;;) {
|
||
/* dirty 绘制：首次全画两钮；此后仅 sel 变化才重画（消频闪）→ 标脏 + present。 */
|
||
if (!cr_init) {
|
||
for (int i = 0; i < 2; i++) draw_cr_button(sel, i);
|
||
cr_init = 1; cr_last_sel = sel;
|
||
meow_ui_flush();
|
||
} else if (sel != cr_last_sel) {
|
||
draw_cr_button(sel, cr_last_sel); /* 旧选中：取消高亮 */
|
||
draw_cr_button(sel, sel); /* 新选中：高亮 */
|
||
meow_dirty_add((cr_last_sel == 0 ? 80 : 280) - 10, 412, 140, 76);
|
||
meow_dirty_add((sel == 0 ? 80 : 280) - 10, 412, 140, 76);
|
||
cr_last_sel = sel;
|
||
meow_ui_flush();
|
||
}
|
||
|
||
int vold = 0, volu = 0, play = 0, pwr = 0;
|
||
if (kp_keys.ok) { kp_poll(&kp_keys, NULL, NULL);
|
||
vold = kp_is_down(&kp_keys, KEY_VOLUMEDOWN); volu = kp_is_down(&kp_keys, KEY_VOLUMEUP);
|
||
play = kp_is_down(&kp_keys, KEY_PLAYPAUSE); }
|
||
if (kp_power.ok) { kp_poll(&kp_power, NULL, NULL); pwr = kp_is_down(&kp_power, KEY_POWER); }
|
||
if (vold && !prev_vold) sel = (sel + 1) % 2;
|
||
if (volu && !prev_volu) sel = (sel - 1 + 2) % 2;
|
||
/* M2.19：播放键不再作「是/确认」（让位给全局媒体控制）。确认框的确认
|
||
* 走触摸点选（下方 tfd 命中），电源键=取消（下行）；播放键删除。 */
|
||
(void)play;
|
||
if (pwr && !prev_pwr) act = 3; /* 电源=取消 */
|
||
prev_vold = vold; prev_volu = volu; prev_play = play; prev_pwr = pwr;
|
||
|
||
if (tfd >= 0) {
|
||
struct pollfd pfd = { tfd, POLLIN, 0 };
|
||
if (poll(&pfd, 1, 0) > 0) {
|
||
unsigned char ev[16];
|
||
while (read(tfd, ev, sizeof ev) == (ssize_t)sizeof ev) {
|
||
uint16_t type = *(uint16_t *)(ev + 8), code = *(uint16_t *)(ev + 10);
|
||
int32_t val = *(int32_t *)(ev + 12);
|
||
if (type == EV_ABS) {
|
||
if (code == ABS_X || code == ABS_MT_POSITION_X) mt_abs(&mt, val, mt.last_y);
|
||
else if (code == ABS_Y || code == ABS_MT_POSITION_Y) mt_abs(&mt, mt.last_x, val);
|
||
} else if (type == EV_KEY && code == BTN_TOUCH) {
|
||
if (val && !mt.down) {
|
||
mt_down(&mt);
|
||
} else if (!val && mt.down) {
|
||
int dx, dy;
|
||
if (mt_up(&mt, &dx, &dy)) {
|
||
for (int i = 0; i < 2; i++) {
|
||
int x0 = (i == 0) ? 80 : 280;
|
||
/* 命中「是/否」钮：x∈[x0-8, x0+128], y∈[412, 488]（含端点） */
|
||
if (mt_in(&mt, x0 - 8, 412, 137, 77))
|
||
{ sel = i; act = i; break; }
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
if (act >= 0) break;
|
||
usleep(POLL_MS * 1000);
|
||
}
|
||
if (tfd >= 0) close(tfd);
|
||
if (act == 0) {
|
||
logmsg("reboot-to-player: YES -> default HibyOS + reboot");
|
||
set_boot_default_hiby();
|
||
if (!sim_no_exec) sys_do_reboot(LINUX_REBOOT_CMD_RESTART);
|
||
return 1;
|
||
}
|
||
logmsg("reboot-to-player: cancel");
|
||
return 0;
|
||
}
|
||
|
||
|
||
/* returns: 0 = stay in menu, 1 = exit menu (BACK TO PLAYER / sim-exit),
|
||
* 2 = launch request */
|
||
|
||
/* M2.8 Bug 3-residual「统一重绘」：把当前 MeowOS 界面内容整体重绘到 buffer0 并强制 pan 到
|
||
* buffer0。息屏唤醒（电源单击亮屏）时调用 —— 唤醒不是 draw 事件：FBIOBLANK(4) 下电 ->
|
||
* FBIOBLANK(0) 上电后，LCDC 指向的内容可能已失效/为空，必须把当前真实界面（应用列表主界面，
|
||
* 含「没有存储卡/没有找到应用」态）重新画一遍再强制 re-pan，而不是仅翻页到陈旧/空缓冲。
|
||
* signature 传入当前界面状态（由 run_menu 持有），不把应用列表局部状态全局化。 */
|
||
static void meow_repaint_surface(struct app apps[MAX_APPS], int napps, int state, int cursor)
|
||
{
|
||
/* M2.11 E：记录唤醒上下文（时刻/亮度/当前 screen_on/待 yoffset），便于定位偶发「唤醒后黑屏
|
||
* 又自愈」的竞态。 */
|
||
int pre_bri = read_brightness();
|
||
int pre_screen = meow_screen_on;
|
||
logmsg("wake repaint: pre bri=%d screen_on=%d (state=%d napps=%d cursor=%d)",
|
||
pre_bri, pre_screen, state, napps, cursor);
|
||
draw_menu(apps, napps, state, cursor, 0, ""); /* 完整重绘当前视图到 back_buf */
|
||
fb_pan_buf0_force(); /* 确保落在被显示的缓冲（buffer0） */
|
||
meow_dirty_full(); meow_ui_flush(); /* A-1/A-2：SDK present（vsync + 单次全帧 blit） */
|
||
int post_bri = read_brightness();
|
||
logmsg("wake repaint done: post bri=%d (after force-pan buffer0)", post_bri);
|
||
}
|
||
|
||
/* set by on_sigterm; run_menu breaks on it so the menu closes cleanly and
|
||
* the main loop restores the player (must be declared before run_menu) */
|
||
static volatile sig_atomic_t sigterm_flag = 0;
|
||
|
||
/* M2.2 sim 钩子：--sim-exit-tap N —— 菜单打开 N ms 后模拟「点 BACK TO PLAYER 行」，
|
||
* 用于验证 MeowOS 模式下 BACK TO PLAYER 显示需重启提示（而非恢复死帧）。 */
|
||
static long sim_exit_tap_ms = 0;
|
||
static int sim_exit_tap_done = 0;
|
||
|
||
/* M2.53：MeowOS 主屏接管时把亮度强制压回用户设置值（display.brightness，经
|
||
* meow_settings_brightness_clamped() —— 下限 brightness_min 默认 1、上限 100），
|
||
* 覆盖 HibyOS 播放器写入 sysfs 的背光下限（16/25）。仅应在「MeowOS 真正接管画面」
|
||
* （播放器已死、主屏常驻，即 run_menu 的 had_player==0）时调用；播放器会话期间的
|
||
* 覆盖菜单（had_player==1）不去抢亮度——尊重播放器背光（§红线）。 */
|
||
static void apply_user_brightness(void)
|
||
{
|
||
int v = meow_settings_brightness_clamped();
|
||
if (v <= 0) v = 60; /* 防御：clamp 后不可能 ≤0，仅兜底 */
|
||
write_brightness(v);
|
||
g_sys.brightness = v;
|
||
logmsg("apply user brightness (MeowOS takeover) -> %d", v);
|
||
}
|
||
|
||
/* real menu loop */
|
||
static void run_menu(struct app apps[MAX_APPS], int napps, int state,
|
||
long sim_tap_ms, long sim_exit_ms)
|
||
{
|
||
int cursor = 0;
|
||
unsigned long long t0 = now_ms();
|
||
int toast_ms = 0;
|
||
char toast[64] = "";
|
||
int want_exit = 0;
|
||
/* M2.17 超时自动息屏：任何输入重置 last_input；空闲 > screen_off_timeout → meow_panel_off()。
|
||
* meow_auto_slept 记录「自动息屏」态（手动电源息屏不置位），任意输入唤醒 + meow_repaint_surface。 */
|
||
unsigned long long last_input_ms = now_ms();
|
||
int any_input = 0;
|
||
int fbfd = -1;
|
||
int had_player = 0; /* M2.2：菜单打开时是否存在存活播放器 */
|
||
long sim_tap_done = 0, sim_exit_done = 0;
|
||
long meow_last_poll = 0; /* M2.2：MeowOS 后台拔营（卡/网）轮询时间戳 */
|
||
|
||
load_config(); /* meow.conf on the card: bg_color etc. */
|
||
|
||
/* A-1/A-2：launcher 用 SDK 渲染栈 —— 初始化 SDK（自建 back_buf/读几何/载字库），
|
||
* 并把刷新率档位/恒满速开关交给 SDK present 帧率门控（去中心化：launcher 不再自带一套）。
|
||
* set_statusbar(0)：launcher 用自己的状态栏（draw_statusbar），关闭 SDK 全局状态栏避免
|
||
* 同区双画（SDK 全局状态栏/左缘返回对 APP 生效；launcher 系统界面暂保留自有状态栏）。 */
|
||
meow_ui_init(NULL);
|
||
meow_ui_set_statusbar(0);
|
||
meow_ui_set_refresh_rate(refresh_rate_cfg);
|
||
meow_ui_set_refresh_always_max(refresh_always_max);
|
||
|
||
/* record the brightness BEFORE we touch it, so any menu exit can
|
||
* restore the player's pre-menu value (0 = player standby -> default 60) */
|
||
int raw_brightness = read_brightness();
|
||
saved_brightness = (raw_brightness > 0) ? raw_brightness : 60;
|
||
logmsg("menu saved brightness = %d", saved_brightness);
|
||
/* remember whether the player had blanked the panel: fb_open() below
|
||
* unblanks so the menu is visible, and restore_backlight() re-blanks
|
||
* on exit to keep the player's display state machine consistent */
|
||
menu_opened_blank = (raw_brightness <= 0);
|
||
|
||
fbfd = fb_open();
|
||
meow_font_bind_fb(); /* M2.6 字库绑定当前 fb 几何（宽/高/pitch） */
|
||
/* M2.6 加载字库（卡上 MeowOS/fonts/default/，卡片已挂载则该步成功；未挂载由下方轮询补载） */
|
||
meow_font_ensure();
|
||
meow_font_reload_multifont(); /* M2.5x 多字体（读 settings display.multi_font + 6 类；关=单字体） */
|
||
/* M2.2：先判播放器是否存活。MeowOS 常驻主界面（播放器已死）→ 不 SIGSTOP、不备份
|
||
* 播放器帧，全程只自绘 fb0（buffer0 + pan0）；仅当存在存活播放器（会话覆盖场景）才
|
||
* 冻结 + 备份，退出时恢复其帧。 */
|
||
had_player = (find_hiby_pid() > 0);
|
||
meow_mode = had_player ? 0 : 1; /* 权威判定：每次按播放器是否存活重置 */
|
||
/* M2.11 A：每次进 MeowOS（热键切换/开机选 MeowOS/覆盖菜单）都全量重抓系统状态快照，
|
||
* HibyOS 里改过（蓝牙/WiFi/音量/亮度等）也同步。主循环 10ms 绝不读系统态。 */
|
||
meow_sys_refresh();
|
||
g_sys.mode = meow_mode;
|
||
g_sys.napps = napps;
|
||
if (had_player) {
|
||
stop_player(); /* freeze the player so the menu owns fb0 */
|
||
} else {
|
||
logmsg("meow mode: hiby_player dead, self-drawn home (no stop/backup)");
|
||
}
|
||
ensure_backlight(); /* only if the panel is dark, never yank brightness */
|
||
unblank_panel(); /* player frozen: it can no longer re-blank */
|
||
/* M2.53：MeowOS 主屏接管（播放器已死，had_player==0）时强制把亮度压回用户
|
||
* display.brightness 设定值。HibyOS 播放器运行/恢复画面会把它自己的背光下限
|
||
* （16/25）写进 sysfs；若以它为「当前亮度」，用户设的低亮度（<25）会被覆盖。
|
||
* 覆盖菜单（had_player==1，播放器会话中）不压回——播电影时亮度归播放器管。 */
|
||
if (!had_player) apply_user_brightness();
|
||
if (had_player) fb_backup_player(); /* only snapshot when a live player is overlaid */
|
||
draw_menu(apps, napps, state, 0, 0, ""); /* full menu into back_buf */
|
||
fb_norm_buf0(); /* ensure LCDC shows buffer0 (yoffset=0) */
|
||
meow_dirty_full(); meow_ui_flush(); /* A-1/A-2：SDK present（vsync + 单次全帧 blit 到 fb0） */
|
||
|
||
/* touch: event reads (event1 is not grabbed) */
|
||
touch_fd = open(DEV_TOUCH, O_RDONLY | O_NONBLOCK);
|
||
if (touch_fd < 0) logmsg("touch open failed: %s", strerror(errno));
|
||
/* M2.6 幽灵触摸防护：菜单激活（启动）即 drain + 冷却 */
|
||
menu_arm_touch(TAP_ARM_DELAY_MS);
|
||
|
||
/* key polling */
|
||
struct keypoll kp_power, kp_keys;
|
||
kp_open(&kp_power, DEV_POWER);
|
||
kp_open(&kp_keys, DEV_KEYS);
|
||
/* M2.16 按键防抖状态（每键独立）；kd_tick 40ms 稳定后才认，抗 ADC 抖动 */
|
||
struct kd_state kd_vold, kd_volu, kd_play, kd_pwr;
|
||
memset(&kd_vold, 0, sizeof kd_vold); memset(&kd_volu, 0, sizeof kd_volu);
|
||
memset(&kd_play, 0, sizeof kd_play); memset(&kd_pwr, 0, sizeof kd_pwr);
|
||
|
||
logmsg("menu open: napps=%d state=%d cursor=%d",
|
||
napps, state, cursor);
|
||
|
||
/* key edge baselines: sample the initial state so keys already held
|
||
* when the menu opens (e.g. the hotkey release tail) do not fire
|
||
* edges; kp.prev cannot be used for this because kp_poll() syncs it
|
||
* to cur before we compare */
|
||
int m_prev_vold = 0, m_prev_volu = 0, m_prev_play = 0, m_prev_pwr = 0;
|
||
for (int w = 0; w < KEYBUF_WORDS; w++) {
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEDOWN % 32))) m_prev_vold = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEUP % 32))) m_prev_volu = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_PLAYPAUSE % 32))) m_prev_play = 1;
|
||
if (kp_power.cur[w] & (1UL << (KEY_POWER % 32))) m_prev_pwr = 1;
|
||
}
|
||
/* M2.3A 电源按住计时：≥8s 强制关机；≥3s 弹电源菜单；与单击息屏/热键按时长区分 */
|
||
unsigned long long pwr_hold_at = 0;
|
||
int pwr_menu_state = 0;
|
||
/* M2.18 Bug 2: 一次性标志——本次电源按下已触发「自动息屏唤醒」时置位，其释放
|
||
* 只唤醒不 toggle（防同一次按键被唤醒路径与单单击 toggle 各消费一次 → 闪黑）。 */
|
||
int pwr_woke = 0;
|
||
/* M2.34: 一次性标志——电源菜单刚关闭（无论确认/取消/超时）。返回主循环后，本次
|
||
* 电源按下-松开不得被 3130「松开→单击」路径误判为「电源单击」→ toggle 息屏，否则：
|
||
* ①菜单点关机/重启：关机/重启画面被息屏覆盖；②焦点在取消键单击电源：取消同时熄屏。
|
||
* 清除时机：电源松开（3130 松开分支末尾）或下一次电源按下边沿。 */
|
||
int pwr_suppress_click = 0;
|
||
|
||
/* The menu was already drawn into buffer0 above (pre-drawn before the pan
|
||
* to buffer0), so a redraw is only needed when something actually changes:
|
||
* cursor movement (input), app exit/enter, toast start/end, or a future
|
||
* notification-badge change. NEVER on a periodic timer — see the big
|
||
* comment on the redraw block below. */
|
||
int dirty = 0; /* 结构变化（app 进出/state/唤醒/热键…）→ 全帧重画 */
|
||
int need_menu_paint = 0; /* M2.16：需 draw_menu 全画 back_buf（光标/toast/test 变化） */
|
||
int last_cursor = 0; /* pre-drawn frame showed cursor 0 */
|
||
int toast_active = 0; /* tracks toast_ms>0 for start/end redraw edges */
|
||
long last_status_tick = 0; /* ~1s status-bar-only refresh (clock) */
|
||
|
||
for (;;) {
|
||
unsigned long long t = now_ms();
|
||
long el = (long)(t - t0);
|
||
any_input = 0; /* M2.17：本圈是否有输入（重置 auto screen-off 计时） */
|
||
|
||
/* SIGTERM during the menu: close it cleanly (restore + resume happen
|
||
* in the hotkey block / main loop after we return) */
|
||
if (sigterm_flag) { logmsg("menu: sigterm, closing"); want_exit = 1; break; }
|
||
|
||
/* 阶段 D · M0：菜单/主屏循环内排空 IPC（非阻塞；应用可随时查询/声明路由） */
|
||
meow_ipc_process();
|
||
meow_notif_tick(); /* M2a：通知 TTL 10s 转储（§8）*/
|
||
|
||
/* sim hooks */
|
||
if (sim_tap_ms > 0 && !sim_tap_done && el >= sim_tap_ms) {
|
||
logmsg("SIM TAP row 0");
|
||
sim_tap_done = 1;
|
||
if (napps > 0 && state == 0) {
|
||
/* fall through: select row 0 */
|
||
int ret = launch_app(&apps[0]);
|
||
/* app exited: RETURN TO THE MENU (v6.3) — closing the menu
|
||
* here would leave the app's last frame (e.g. BYE) on fb0,
|
||
* and the player only redraws on input events (none arrive,
|
||
* injection is not delivered), so the screen would stay
|
||
* dark until a key press. Staying in the menu keeps the
|
||
* menu visible; BACK TO PLAYER then resumes the player.
|
||
* Bug 2/3/4: a queued touch from the app run must NOT be
|
||
* replayed as a fresh menu tap (relaunch / flash-to-player),
|
||
* and the "CANNOT START" toast only fires on a real launch
|
||
* failure (ret != 0), never after a clean app exit. */
|
||
menu_after_app_exit(ret == 0);
|
||
last_input_ms = now_ms(); /* M2.17：回主界面即视为输入，重置自动息屏计时 */
|
||
dirty = 1; /* app wrote buffer0 during its run -> redraw menu */
|
||
if (ret != 0) {
|
||
snprintf(toast, sizeof toast, "CANNOT START: %s", apps[0].name);
|
||
toast_ms = TOAST_MS;
|
||
}
|
||
} else {
|
||
snprintf(toast, sizeof toast, "NO APPS");
|
||
toast_ms = TOAST_MS;
|
||
}
|
||
}
|
||
if (sim_exit_ms > 0 && !sim_exit_done && el >= sim_exit_ms) {
|
||
logmsg("SIM EXIT");
|
||
sim_exit_done = 1;
|
||
want_exit = 1;
|
||
break;
|
||
}
|
||
/* M2.6 sim：点 BACK TO PLAYER 行 → MeowOS 模式弹「需重启」确认框并留下；
|
||
* 会话覆盖模式则正常退出。 */
|
||
if (sim_exit_tap_ms > 0 && !sim_exit_tap_done && el >= sim_exit_tap_ms) {
|
||
logmsg("SIM TAP exit row");
|
||
sim_exit_tap_done = 1;
|
||
if (meow_mode) {
|
||
int rb = confirm_reboot_player();
|
||
menu_arm_touch(TAP_ARM_DELAY_MS);
|
||
dirty = 1;
|
||
logmsg("meow mode: BACK TO PLAYER -> confirm reboot (rb=%d)", rb);
|
||
} else {
|
||
want_exit = 1;
|
||
break;
|
||
}
|
||
}
|
||
|
||
/* M2.2 MeowOS 系统拔营：无播放器时由 launcher 接管官方交给
|
||
* hiby_player/sys_server 的两件事 —— TF 卡挂载 + WiFi 联网。
|
||
* 后台每 2s 重试，不阻塞主界面；卡片就绪后重扫应用列表并就地刷新。
|
||
* 仅 meow 常驻模式需要（HibyOS 覆盖模式播放器仍在，/或其管理）。
|
||
* M2.11 C：TF 卡热插拔最佳努力 —— 拔出检测（节点消失→无卡）、
|
||
* 插入检测（节点出现→自动挂载+重扫+重载字库）。不阻塞、不崩。 */
|
||
if (meow_mode && (long)(t - t0) - meow_last_poll >= 2000) {
|
||
meow_last_poll = (long)(t - t0);
|
||
ensure_wifi();
|
||
if (!sd_device_present()) {
|
||
/* 卡被拔出：设备节点消失 → 无卡态。停止扫描；留 state=1（NO STORAGE CARD）。
|
||
* 若此前是正常态，切到无卡并重绘。不杀正在跑的应用（其由 D 的监测处理）。 */
|
||
if (state == 0 || state == 2) { state = 1; dirty = 1; logmsg("hotplug: card removed -> state=1"); }
|
||
g_sys.sd_mounted = 0;
|
||
log_poll_card(); /* 卡日志不可用时回退 /tmp 缓冲 */
|
||
} else if (ensure_card_mounted()) {
|
||
/* 卡在且已挂载（刚插入/重挂成功）：补字库 + 重扫 · 仅真正变化才重绘 */
|
||
int was_nocard = (state == 1);
|
||
if (!mfont_ready && meow_font_ensure()) { dirty = 1; logmsg("hotplug: font loaded late"); }
|
||
if (mfont_ready) meow_font_reload_multifont(); /* M2.5x：卡挂载后重配多字体（此前无全局可配） */
|
||
if (was_nocard || state != 0 || napps == 0) {
|
||
struct app fresh[MAX_APPS];
|
||
int fn = scan_apps(fresh);
|
||
int fstate = (fn < 0) ? (fn == -1 ? 1 : 2) : (fn == 0 ? 2 : 0);
|
||
if (fstate == 0 && fn > 0) {
|
||
for (int i = 0; i < fn; i++) apps[i] = fresh[i];
|
||
napps = fn; state = 0;
|
||
logmsg("hotplug: card ready -> %d apps loaded", napps);
|
||
dirty = 1;
|
||
} else if (fstate != state) {
|
||
state = fstate;
|
||
logmsg("hotplug: state -> %d", state);
|
||
dirty = 1;
|
||
}
|
||
}
|
||
g_sys.sd_mounted = 1;
|
||
log_poll_card();
|
||
} else if (!sd_mounted()) {
|
||
/* 卡在但未挂载（正挂载/失败）：保持当前显示不误判；不崩。 */
|
||
g_sys.sd_mounted = 0;
|
||
}
|
||
}
|
||
|
||
/* keys: poll and handle edges. Power is NOT handled here anymore
|
||
* (v6.5): inside the menu the power key is a pure screen-off/on
|
||
* toggle handled by sys_server/kernel (the player being SIGSTOPped
|
||
* does not affect it) — the launcher must NOT touch brightness/panel
|
||
* or exit the menu on it. Exit is only via the BACK TO PLAYER touch
|
||
* row (below) or sim-exit. */
|
||
kp_poll(&kp_power, NULL, NULL);
|
||
kp_poll(&kp_keys, NULL, NULL);
|
||
int vold = 0, volu = 0, play = 0, pwr = 0;
|
||
for (int w = 0; w < KEYBUF_WORDS; w++) {
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEDOWN % 32))) vold = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEUP % 32))) volu = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_PLAYPAUSE % 32))) play = 1;
|
||
if (kp_power.cur[w] & (1UL << (KEY_POWER % 32))) pwr = 1;
|
||
}
|
||
if (sim_power_hold_ms > 0 && el >= sim_power_hold_ms) pwr = 1; /* sim：按住电源 */
|
||
/* 原始（未防抖）键值：长按连续（vol_ramp held）用，避免防抖延迟让单击仍连爬多档。 */
|
||
int rvold = vold, rvolu = volu, rplay = play, rpwr = pwr; /* 原始值：长按连续用 rvolu/rvold */
|
||
(void)rplay; (void)rpwr; /* play/pwr 只用稳定边沿，不需原始 held */
|
||
/* M2.16 防抖：每键值须稳定 KEY_DEBOUNCE_MS(40ms) 才认可，抗 ADC 抖动（"点一下跳5-6下"）。
|
||
* 稳定态 vold/volu/play/pwr 与 m_prev_*（上一稳定值）比较得稳定边沿；长按(连续)用 .down。 */
|
||
(void)kd_tick(&kd_vold, vold);
|
||
(void)kd_tick(&kd_volu, volu);
|
||
(void)kd_tick(&kd_play, play);
|
||
(void)kd_tick(&kd_pwr, pwr);
|
||
vold = kd_vold.stable; volu = kd_volu.stable;
|
||
play = kd_play.stable; pwr = kd_pwr.stable;
|
||
/* M2.6 电源语义（MeowOS 自持面板，无播放器拔河）：
|
||
* 单击（短按松开 <2s）= 息屏/亮屏；2s = 电源菜单；8s = 强制关机。 */
|
||
if (meow_mode) {
|
||
if (pwr && !m_prev_pwr) {
|
||
pwr_hold_at = t; pwr_menu_state = 0; any_input = 1;
|
||
pwr_suppress_click = 0; /* M2.34：新一次电源按下清除旧的抑制标志 */
|
||
/* M2.18 Bug 2: 若这次按下正好落在「自动息屏」态（auto_slept 且屏已关），
|
||
* 本次电源键只做唤醒（下方通用醒屏分支 meow_panel_on()），其释放不再走
|
||
* 单单击 toggle —— 否则同一次按下先被唤醒点亮、又在释放时被 toggle 关掉
|
||
* （症状：自动息屏后点电源「闪一下黑、再点才亮」）。 */
|
||
if (meow_auto_slept && !meow_screen_on) pwr_woke = 1;
|
||
}
|
||
if (pwr && pwr_hold_at) {
|
||
/* M2.10/M2.11 B：8s 强关只在该「按住」从未打开过电源菜单时才触发
|
||
* （!pwr_menu_state）。一旦打开过菜单（用户已互动/取消），run_menu 的
|
||
* 8s 强关永远不在此 hold 上再触发 —— 由菜单自身的「按当前项确认」/取消
|
||
* 决定动作。避免「按住电源开菜单->确认取消->仍按住->run_menu 8s 强关」残留。
|
||
* M2.37：阈值接 power.forceoff_ms（默认 8000），强关保持 > 弹菜单上限。 */
|
||
if (t - pwr_hold_at >= power_forceoff_ms && !pwr_menu_state) {
|
||
if (sim_no_exec) { logmsg("pm: [sim-no-exec] POWER HOLD %dms -> would force poweroff", power_forceoff_ms); }
|
||
else { logmsg("pm: POWER HOLD %dms -> force poweroff", power_forceoff_ms); sys_do_reboot(LINUX_REBOOT_CMD_POWER_OFF); }
|
||
m_prev_pwr = pwr; continue;
|
||
} else if (t - pwr_hold_at >= power_longpress_menu_ms && !pwr_menu_state) {
|
||
pwr_menu_state = 1;
|
||
logmsg("pm: POWER HOLD %dms -> show power menu", power_longpress_menu_ms);
|
||
show_power_menu(); /* 动作在函数内 system(); 取消则续循环 */
|
||
/* M2.31：菜单打开期间主循环阻塞，last_input_ms 不会刷新；若停留超过自动息屏
|
||
* 超时，取消返回后会被误判「空闲」而立即熄屏（用户点取消瞬间黑屏）。
|
||
* 菜单返回即视为「刚有输入」，重置自动息屏计时。 */
|
||
last_input_ms = now_ms();
|
||
/* M2.11 B：菜单已关闭（取消）。清空按住计时与菜单态：仍按住/随后松开的电源
|
||
* 按「新按下」处理，绝不把已互动的 hold 再累计到 8s 强关。 */
|
||
pwr_hold_at = 0; pwr_menu_state = 0; pwr_woke = 0;
|
||
pwr_suppress_click = 1; /* M2.34：菜单返回后抑制本次电源松开被误判单击熄屏 */
|
||
dirty = 1; /* 取消后重绘应用列表 */
|
||
menu_arm_touch(800); /* M2.6 幽灵触摸防护：菜单关闭后忽略触摸 */
|
||
/* M2.25 黑屏修复：阻塞式 show_power_menu() 期间 kd_* 防抖状态冻结。
|
||
* 用户常「松开电源 → 用触摸点取消」，返回后 kd_pwr.stable 仍是旧的「按住=1」，
|
||
* 而 m_prev_pwr 已按 raw 重播为 0 → 二者错配误判「新按下」刷新 pwr_hold_at，
|
||
* 随后稳定值转 0 时又被误判「单击」→ meow_toggle_panel 把面板关掉（黑屏且
|
||
* 难唤醒：launcher 以为屏开着，电源唤醒逻辑不触发）。电源键确认取消时 raw
|
||
* 仍=按住=1，无此错配，所以只有触摸路径黑屏。此处重播 kd_* 并以当前 raw
|
||
* 对齐 m_prev_*，杜绝该假边沿（真实新按键仍正常防抖/单击）。 */
|
||
memset(&kd_pwr, 0, sizeof kd_pwr);
|
||
memset(&kd_vold, 0, sizeof kd_vold);
|
||
memset(&kd_volu, 0, sizeof kd_volu);
|
||
memset(&kd_play, 0, sizeof kd_play);
|
||
kp_poll(&kp_power, NULL, NULL);
|
||
kp_poll(&kp_keys, NULL, NULL);
|
||
m_prev_pwr = kp_is_down(&kp_power, KEY_POWER);
|
||
m_prev_vold = kp_is_down(&kp_keys, KEY_VOLUMEDOWN);
|
||
m_prev_volu = kp_is_down(&kp_keys, KEY_VOLUMEUP);
|
||
m_prev_play = kp_is_down(&kp_keys, KEY_PLAYPAUSE);
|
||
continue;
|
||
}
|
||
}
|
||
if (!pwr && m_prev_pwr) {
|
||
/* 松开：短按（<3s 且菜单未开）→ 单击 = 息屏/亮屏切换 */
|
||
if (pwr_suppress_click) {
|
||
/* M2.34：本次电源按下来自「电源菜单内确认/取消」，其松开不得 toggle 息屏
|
||
* （否则关机/重启画面被息屏覆盖，或焦点在取消键单击电源导致熄屏）。 */
|
||
logmsg("pm: power release after power-menu -> no toggle (suppress)");
|
||
} else if (pwr_hold_at && (t - pwr_hold_at < power_longpress_menu_ms) && !pwr_menu_state && !pwr_woke) {
|
||
logmsg("pm: power single-click -> toggle panel (was %s)", meow_screen_on ? "on" : "off");
|
||
meow_toggle_panel();
|
||
if (meow_screen_on) {
|
||
/* M2.8 Bug 3-residual：唤醒不是 draw 事件，LCDC 在 FBIOBLANK(4)->(0)
|
||
* 后指向的内容可能已失效/为空；必须把当前界面（应用列表）整体重绘到
|
||
* buffer0 并强制 re-pan，而非仅翻页/仅 dirty 重绘（M2.7 仍黑屏根因）。 */
|
||
meow_auto_slept = 0; /* M2.17：手动/自动息屏后电源单击唤醒均清自动态 */
|
||
last_input_ms = now_ms(); /* M2.18 Bug 1：用真实墙钟（防 t 过期回绕） */
|
||
meow_repaint_surface(apps, napps, state, cursor);
|
||
} else {
|
||
dirty = 1; /* 息屏：面板已黑，留 dirty 供下次亮屏重绘 */
|
||
last_input_ms = now_ms(); /* M2.18 Bug 1：用真实墙钟 */
|
||
}
|
||
} else if (pwr_woke) {
|
||
/* M2.18 Bug 2：本次电源按下已由自动息屏唤醒分支消费，释放只记录、不 toggle。 */
|
||
logmsg("pm: power release after auto screen-off wake -> no toggle (wake only)");
|
||
}
|
||
pwr_hold_at = 0; pwr_menu_state = 0; pwr_woke = 0;
|
||
pwr_suppress_click = 0; /* M2.34：电源已松开，抑制标志一次性用完即清 */
|
||
}
|
||
m_prev_pwr = pwr;
|
||
}
|
||
/* volume/play edges against the launcher-maintained baselines
|
||
* (previously dead code: prev was re-seeded from cur each pass, so
|
||
* no edge could ever fire and the menu keys could not navigate or
|
||
* launch).
|
||
* M2.11 E：MeowOS 下音量键 = 调系统软件音量（settings audio.volume，步进5 clamp），
|
||
* 状态栏即时显示、持久化。有播放器的覆盖态才保留音量键=菜单光标导航。 */
|
||
if (meow_mode) {
|
||
if (vold && !m_prev_vold) {
|
||
any_input = 1;
|
||
settings_volume_adj(-settings_volume_step); /* 起线性渐变（1% 爬） */
|
||
logmsg("volume DOWN <- ramp step=%d", settings_volume_step);
|
||
} else if (volu && !m_prev_volu) {
|
||
any_input = 1;
|
||
settings_volume_adj(+settings_volume_step);
|
||
logmsg("volume UP <- ramp step=%d", settings_volume_step);
|
||
}
|
||
} else {
|
||
/* M2.36 B2b：光标范围扩展为 [0..napps]（napps=「系统设置」行，位于 Exit 行上方）。
|
||
* 音量下移越过最后应用 → 设置行；设置行再下移 → 回 0。应用行仍 0..napps-1。 */
|
||
if (vold && !m_prev_vold && napps > 0 && state == 0) {
|
||
any_input = 1;
|
||
cursor++;
|
||
if (cursor > napps) cursor = 0; /* napps=设置行 */
|
||
logmsg("menu cursor -> %d", cursor);
|
||
}
|
||
if (volu && !m_prev_volu && napps > 0 && state == 0) {
|
||
any_input = 1;
|
||
cursor--;
|
||
if (cursor < 0) cursor = napps; /* 回绕到设置行 */
|
||
logmsg("menu cursor -> %d", cursor);
|
||
}
|
||
}
|
||
/* M2.14 线性渐变：每 tick 推进 1% 并刷新状态栏（显示爬升中的值或最终值） */
|
||
if (meow_mode && vol_ramp_dir != 0) {
|
||
int held = (vol_ramp_dir > 0) ? rvolu : rvold; /* 长按=该方向键仍按住（用原始值：松开立即停止） */
|
||
int going = vol_ramp_tick(held);
|
||
g_sys.vol = settings_volume_get();
|
||
paint_sb_right(); /* M2.16：只重画右侧信息格（VOL 变化），不动列表/时钟 */
|
||
if (!going) logmsg("volume ramp end -> %d", g_sys.vol);
|
||
}
|
||
/* M2.19：播放键不再是「应用列表的确认/打开」——它让位给全局媒体控制
|
||
* （播放/暂停，路由到当前活跃媒体会话）。菜单/列表的确认只走触摸点选
|
||
* （见下方 touch 段），物理确认交给电源键（power 菜单/确认框），播放键
|
||
* 在 MeowOS 主循环里不再触发 launch_app。媒体预留：后续媒体会话接管，
|
||
* 此处仅作 any_input（any_input 仍用于重置自动息屏计时）。（原播放键=打开
|
||
* 已删；如需物理启动应用，可后续加「长按播放键」，本轮不做。） */
|
||
if (play && !m_prev_play) {
|
||
any_input = 1; /* 仍视为输入（重置息屏计时）；不再 launch_app */
|
||
logmsg("play key: media-reserved (no menu confirm)");
|
||
}
|
||
m_prev_vold = vold; m_prev_volu = volu; m_prev_play = play;
|
||
|
||
/* touch (event reads) */
|
||
if (touch_fd >= 0 && meow_screen_on) { /* 息屏时不处理触摸（goodix 已被 FBIOBLANK(4) 挂起） */
|
||
struct pollfd pfd = { touch_fd, POLLIN, 0 };
|
||
if (poll(&pfd, 1, 0) > 0) {
|
||
unsigned char ev[16];
|
||
while (read(touch_fd, ev, sizeof ev) == 16) {
|
||
uint16_t type = *(uint16_t *)(ev + 8);
|
||
uint16_t code = *(uint16_t *)(ev + 10);
|
||
int32_t val = *(int32_t *)(ev + 12);
|
||
if (type == EV_ABS) {
|
||
if (code == ABS_X || code == ABS_MT_POSITION_X) t_last_x = val;
|
||
else if (code == ABS_Y || code == ABS_MT_POSITION_Y) t_last_y = val;
|
||
/* M2.23 原点锁定：goodix 事件时序不保证 ABS 与 BTN_TOUCH 先后，
|
||
* 按下边沿只标 t_down，原点延迟到「本次按下之后」的首个有效坐标才锁定，
|
||
* 杜绝把上一手势残留(-1/旧坐标)当本次手势起点。 */
|
||
if (t_down && !t_down_valid && t_last_x >= 0 && t_last_y >= 0) {
|
||
t_down_x = t_last_x; t_down_y = t_last_y; t_down_valid = 1;
|
||
}
|
||
/* ⑨ 顶部热区「跟手下拉」打开通知中心（拖动中即进，真跟手）：
|
||
* 原点锁定 + 起点在顶部热区(y<SB_BAR_H) + 下拉达 NCP_DRAG_ENTER_SLOP →
|
||
* 立即切入 run_notif_center（此时手指仍按下拖动），由面板内拖动路径把 progress
|
||
* 映射为手指位移（跟手 1:1），松手由面板内锚定判定补到展开/收回（半程可回）。
|
||
* 原「抬手边沿 mnp_top_swipe_down」打开改为「拖动中即开」（该抬手边沿保留为防御）。
|
||
* 先在本次 ABS 内触发一次（menu_live_open_pending latch）；
|
||
* 进入前 t_down=0 使返回后同次手势的剩余事件被忽略（防 double-open/残留）。 */
|
||
if (t_down && t_down_valid && !menu_live_open_pending &&
|
||
t_down_y >= 0 && t_down_y < SB_BAR_H &&
|
||
(t_last_y - t_down_y) >= NCP_DRAG_ENTER_SLOP) {
|
||
menu_live_open_pending = 1; /* 本次手势仅触发一次 */
|
||
int loy = t_down_y;
|
||
logmsg("menu: top-edge live drag-down -> notification center (dy=%d)",
|
||
t_last_y - loy);
|
||
t_down = 0; t_down_valid = 0; /* 消费本次手势：返回后不再判 tap/滑动/重开 */
|
||
menu_arm_touch(TAP_ARM_DELAY_MS);
|
||
int want_launch = -1;
|
||
run_notif_center(apps, napps, &want_launch, 1, t_down_x, loy);
|
||
/* 重播按键防抖基线（同原 top-swipe 路径），防面板内电源/音量边沿被 run_menu 误判 */
|
||
memset(&kd_pwr, 0, sizeof kd_pwr);
|
||
memset(&kd_vold, 0, sizeof kd_vold);
|
||
memset(&kd_volu, 0, sizeof kd_volu);
|
||
memset(&kd_play, 0, sizeof kd_play);
|
||
kp_poll(&kp_power, NULL, NULL);
|
||
kp_poll(&kp_keys, NULL, NULL);
|
||
m_prev_pwr = kp_is_down(&kp_power, KEY_POWER);
|
||
m_prev_vold = kp_is_down(&kp_keys, KEY_VOLUMEDOWN);
|
||
m_prev_volu = kp_is_down(&kp_keys, KEY_VOLUMEUP);
|
||
m_prev_play = kp_is_down(&kp_keys, KEY_PLAYPAUSE);
|
||
last_input_ms = now_ms();
|
||
menu_arm_touch(800);
|
||
dirty = 1;
|
||
if (want_launch >= 0 && want_launch < napps) {
|
||
logmsg("menu: notification launch app idx=%d", want_launch);
|
||
int ret = launch_app(&apps[want_launch]);
|
||
menu_after_app_exit(ret == 0);
|
||
last_input_ms = now_ms();
|
||
dirty = 1;
|
||
if (ret != 0) {
|
||
snprintf(toast, sizeof toast, "CANNOT START: %s",
|
||
apps[want_launch].name);
|
||
toast_ms = TOAST_MS;
|
||
}
|
||
}
|
||
continue; /* 本圈不再按 tap/其余处理（剩余事件因 t_down=0 成 no-op） */
|
||
}
|
||
} else if (type == EV_KEY && code == BTN_TOUCH) {
|
||
if (val && !t_down) {
|
||
/* Bug 2/4: ignore touches inside the post-app
|
||
* cooldown (goodix ghost + back-tap replay). */
|
||
if (now_ms() < menu_touch_cooldown_until) {
|
||
/* M2.18 排查乱跳：记录被冷却丢弃的按下（坐标 + 剩余冷却），
|
||
* 便于定位「概率进 Hello」是否 ghost/重放越过冷却。 */
|
||
logmsg("menu touch dropped by cooldown (at %d,%d, rem %llu ms)",
|
||
t_last_x, t_last_y,
|
||
menu_touch_cooldown_until - now_ms());
|
||
} else {
|
||
any_input = 1; /* M2.17：触摸重置自动息屏计时 */
|
||
t_down = 1;
|
||
t_down_valid = 0; /* 原点待首个有效坐标锁定（防残留 -1/旧值） */
|
||
t_last_x = -1; t_last_y = -1; /* 本次以「无坐标」起步（防跨手势残留） */
|
||
menu_live_open_pending = 0; /* ⑨ 新触摸：复位 live-open latch */
|
||
}
|
||
}
|
||
else if (!val && t_down) {
|
||
t_down = 0;
|
||
if (!t_down_valid) {
|
||
/* 本次按下从未锁到有效坐标（坐标滞后/ghost 空按下）：丢本次。 */
|
||
logmsg("menu tap dropped: no valid origin (last %d,%d)",
|
||
t_last_x, t_last_y);
|
||
t_down_x = t_down_y = -1;
|
||
} else {
|
||
int tx = t_down_x, ty = t_down_y;
|
||
int dx = t_last_x - tx, dy = t_last_y - ty;
|
||
int adx = dx < 0 ? -dx : dx, ady = dy < 0 ? -dy : dy;
|
||
t_down_valid = 0;
|
||
logmsg("menu tap at %d,%d (up %d,%d, d=(%d,%d))", tx, ty,
|
||
t_last_x, t_last_y, dx, dy);
|
||
/* 阶段B：顶部热区下滑打开通知中心。判定在「滑动」分支内先于左缘返回——
|
||
* 左缘（down_x<MEOW_EDGE_W）起点交给 meow_edge_back 优先消费；
|
||
* 本函数只在顶部热区（down_y<SB_BAR_H）+向下主导时返回 1，与左缘互斥。 */
|
||
if (mnp_top_swipe_down(tx, ty, dx, dy, SB_BAR_H, MENU_SWIPE_THRESH)) {
|
||
logmsg("menu: top-edge swipe-down -> notification center (release edge, fallback)");
|
||
menu_arm_touch(TAP_ARM_DELAY_MS);
|
||
int want_launch = -1;
|
||
run_notif_center(apps, napps, &want_launch, 0, 0, 0); /* ⑨ live_open=0 → 触发式自动展开（防御） */
|
||
/* 重播按键防抖基线，防面板内电源/音量边沿被 run_menu 误判（M2.25 同款）。 */
|
||
memset(&kd_pwr, 0, sizeof kd_pwr);
|
||
memset(&kd_vold, 0, sizeof kd_vold);
|
||
memset(&kd_volu, 0, sizeof kd_volu);
|
||
memset(&kd_play, 0, sizeof kd_play);
|
||
kp_poll(&kp_power, NULL, NULL);
|
||
kp_poll(&kp_keys, NULL, NULL);
|
||
m_prev_pwr = kp_is_down(&kp_power, KEY_POWER);
|
||
m_prev_vold = kp_is_down(&kp_keys, KEY_VOLUMEDOWN);
|
||
m_prev_volu = kp_is_down(&kp_keys, KEY_VOLUMEUP);
|
||
m_prev_play = kp_is_down(&kp_keys, KEY_PLAYPAUSE);
|
||
last_input_ms = now_ms();
|
||
menu_arm_touch(800);
|
||
dirty = 1;
|
||
/* 点击通知命中可启动 app → 走标准启动链路（与触摸行同路径）。 */
|
||
if (want_launch >= 0 && want_launch < napps) {
|
||
logmsg("menu: notification launch app idx=%d", want_launch);
|
||
int ret = launch_app(&apps[want_launch]);
|
||
menu_after_app_exit(ret == 0);
|
||
last_input_ms = now_ms();
|
||
dirty = 1;
|
||
if (ret != 0) {
|
||
snprintf(toast, sizeof toast, "CANNOT START: %s",
|
||
apps[want_launch].name);
|
||
toast_ms = TOAST_MS;
|
||
}
|
||
}
|
||
continue; /* 本圈不再按 tap/其余处理 */
|
||
}
|
||
/* M2.23 滑动不启动：抬手位移 >= 阈值 → 判为滑动，不 launch、
|
||
* 不进行行判定（为将来左右滑切屏预留；本轮只判滑动、不打事件）。 */
|
||
if (adx >= MENU_SWIPE_THRESH || ady >= MENU_SWIPE_THRESH) {
|
||
logmsg("menu swipe (dx=%d,dy=%d) — no launch", dx, dy);
|
||
} else if (tx >= 0 && ty >= 0) {
|
||
if (ty >= EXIT_ROW - 4 && ty < EXIT_ROW + ROW_H - 8) {
|
||
logmsg("menu: touch exit row");
|
||
if (meow_mode) {
|
||
/* M2.6 G：播放器已死，弹出「返回播放器需重启」确认框。
|
||
* 是=写选单默认HibyOS + reboot；否=留在 MeowOS。
|
||
* 绝不恢复到播放器死帧、绝不对死进程 SIGCONT。 */
|
||
logmsg("meow mode: BACK TO PLAYER -> confirm reboot");
|
||
int rb = confirm_reboot_player();
|
||
menu_arm_touch(TAP_ARM_DELAY_MS); /* 幽灵触摸防护 */
|
||
dirty = 1;
|
||
if (rb) { logmsg("reboot-to-player: yes, rebooting"); }
|
||
/* rb==1 时 reboot 已发起，通常不回；rb==0 留在菜单 */
|
||
} else {
|
||
want_exit = 1;
|
||
break;
|
||
}
|
||
}
|
||
/* M2.36 B2b：系统设置行（位于 Exit 行上方，y ∈ [588-4, 588+52-8)）。
|
||
* 命中 → 进设置页。阻塞式 run_settings_page 返回后，重播 kd_* 并以
|
||
* 当前 raw 对齐 m_prev_*（M2.25 黑屏修复同款），杜绝「设置页内按电源
|
||
* 返回」的抬起边沿在 run_menu 被误判为面板单击而熄屏。 */
|
||
else if (ty >= EXIT_ROW - ROW_H - 4 && ty < EXIT_ROW - ROW_H + ROW_H - 8) {
|
||
logmsg("menu: touch settings row -> settings page");
|
||
menu_arm_touch(TAP_ARM_DELAY_MS); /* 幽灵触摸防护：吃掉打开此行的那次触摸 */
|
||
run_settings_page();
|
||
memset(&kd_pwr, 0, sizeof kd_pwr);
|
||
memset(&kd_vold, 0, sizeof kd_vold);
|
||
memset(&kd_volu, 0, sizeof kd_volu);
|
||
memset(&kd_play, 0, sizeof kd_play);
|
||
kp_poll(&kp_power, NULL, NULL);
|
||
kp_poll(&kp_keys, NULL, NULL);
|
||
m_prev_pwr = kp_is_down(&kp_power, KEY_POWER);
|
||
m_prev_vold = kp_is_down(&kp_keys, KEY_VOLUMEDOWN);
|
||
m_prev_volu = kp_is_down(&kp_keys, KEY_VOLUMEUP);
|
||
m_prev_play = kp_is_down(&kp_keys, KEY_PLAYPAUSE);
|
||
last_input_ms = now_ms(); /* 回主界面即视为输入 */
|
||
menu_arm_touch(800); /* 设置页返回后再忽略近期触摸 */
|
||
dirty = 1; /* 全帧重画应用列表 */
|
||
}
|
||
/* M2.18 排查乱跳：改为 else if —— 原为两个独立 if，退出行与
|
||
* 应用行动作非互斥。应用很多（napps*ROW_H 上探到 EXIT 带）时，
|
||
* 一个 tap 会同时命中退出行(<~684)与应用行带，触发确认重启又启动
|
||
* 应用（或直接 break 走人）→ 概率乱跳。退出行优先，命中即不再
|
||
* 落到应用行。普通小列表两区间不重叠，行为不变。 */
|
||
else if (ty >= ROW_TOP && ty < ROW_TOP + napps * ROW_H && napps > 0 && state == 0) {
|
||
int idx = (ty - ROW_TOP) / ROW_H;
|
||
if (idx < napps) {
|
||
logmsg("menu: touch row %d", idx);
|
||
int ret = launch_app(&apps[idx]);
|
||
/* app exited: return to menu (v6.3).
|
||
* menu_after_app_exit() drains queued
|
||
* app-run touches so they are not
|
||
* replayed as row/tap gestures. */
|
||
menu_after_app_exit(ret == 0);
|
||
last_input_ms = now_ms(); /* M2.17：回主界面即视为输入，重置自动息屏计时 */
|
||
dirty = 1; /* app wrote buffer0 -> redraw menu */
|
||
if (ret != 0) {
|
||
snprintf(toast, sizeof toast, "CANNOT START: %s", apps[idx].name);
|
||
toast_ms = TOAST_MS;
|
||
}
|
||
}
|
||
}
|
||
}
|
||
t_down_x = t_down_y = -1; /* 复位，下一手势从零开始 */
|
||
}
|
||
}
|
||
}
|
||
}
|
||
if (want_exit) break;
|
||
}
|
||
}
|
||
|
||
/* ---- M2.17 超时自动息屏（主界面；主循环 10ms 低频检查，不阻塞）----
|
||
* 任何输入重置 last_input；空闲 > screen_off_timeout（0=常亮）且未在 keep_awake 页 → 息屏。
|
||
* 自动息屏后任意输入唤醒（电源单击路径已在 meow_mode 块处理；这里处理其他输入/触摸）。
|
||
* black 模式：面板仍上电、触摸未挂起，故在屏下额外探测一次 BTN_TOUCH 按下 → 触发唤醒
|
||
* （不处理点击；唤醒后下一圈正常触摸处理）。panel 模式触摸已被 FBIOBLANK(4) 挂起，仅按键唤醒。 */
|
||
if (meow_auto_slept && !meow_screen_on && screen_off_mode == 1 && touch_fd >= 0) {
|
||
struct pollfd spfd = { touch_fd, POLLIN, 0 };
|
||
if (poll(&spfd, 1, 0) > 0) {
|
||
unsigned char ev[16];
|
||
while (read(touch_fd, ev, sizeof ev) == 16) {
|
||
uint16_t type = *(uint16_t *)(ev + 8), code = *(uint16_t *)(ev + 10);
|
||
int32_t val = *(int32_t *)(ev + 12);
|
||
if (type == EV_KEY && code == BTN_TOUCH && val) any_input = 1;
|
||
}
|
||
}
|
||
}
|
||
/* M2.18 Bug 1: 用 now_ms() 而非本圈顶部捕获的 t —— launch_app() 阻塞期间 t 已过期
|
||
* （停在 app 启动前小数），若仍写 t 会把 last_input 倒拨到 app 启动时刻；写 now_ms()
|
||
* 才是「输入发生」的真实墙钟。配合下方 idle_ms_since 的回绕保护，杜绝误判空闲。 */
|
||
if (any_input) last_input_ms = now_ms();
|
||
if (meow_auto_slept && any_input && !meow_screen_on) {
|
||
logmsg("auto screen-off: input wake (meow_mode=%d keep_awake=%d)", meow_mode, fg_keep_awake());
|
||
meow_panel_on();
|
||
meow_auto_slept = 0;
|
||
last_input_ms = now_ms();
|
||
meow_repaint_surface(apps, napps, state, cursor); /* M2.8 唤醒重绘 */
|
||
}
|
||
if (screen_off_timeout > 0 && meow_screen_on && !meow_auto_slept && !fg_keep_awake()) {
|
||
/* M2.18 Bug 1: 用 idle_ms_since 取差，杜绝 t<last_input 无符号回绕误判「空闲30s」。 */
|
||
if (idle_ms_since(t, last_input_ms) >= (unsigned long long)screen_off_timeout * 1000) {
|
||
meow_panel_off();
|
||
meow_auto_slept = 1;
|
||
logmsg("auto screen-off after %ds idle (mode=%s keep_awake=%d, t=%llu last=%llu)",
|
||
screen_off_timeout, screen_off_mode ? "black" : "panel",
|
||
fg_keep_awake(), t, last_input_ms);
|
||
}
|
||
}
|
||
|
||
/* Redraw only when something actually changed: cursor movement (an
|
||
* input event), app exit/enter (which rewrote buffer0), toast
|
||
* start/end, or a future notification-badge change. NEVER on a
|
||
* periodic timer.
|
||
*
|
||
* v6.8 BUG (the ~3fps list flicker): the v6.8 "500ms safety redraw"
|
||
* rewrote the ENTIRE menu into the live-displayed buffer0 every 500ms
|
||
* (the v6.8 fix made last_redraw=el so the timer finally fired), plus
|
||
* draw_statusbar()'s amixer popen on every redraw. An in-place full
|
||
* rewrite of the buffer the LCDC is scanning produces visible tearing/
|
||
* pulsing on the app list, and the slow amixer popen stalls the loop.
|
||
* Full-redraw in place is only correct right after a REAL change; the
|
||
* steady-state list must not be touched. */
|
||
/* M2.16：只在真变化时标脏（精确到格子），绝无"动一下就全屏重绘"。
|
||
* 光标移动 → 旧/新两行；toast 起止 → toast 区；其余结构变化 → dirty=1（全帧）。
|
||
* 音量渐变/时钟只经 paint_sb_right/draw_clock 标右侧格/时钟格。 */
|
||
if (cursor != last_cursor) {
|
||
/* M2.36 B2b：光标可能在应用行（0..napps-1）或「系统设置」行（napps，位于 Exit 行上方）。
|
||
* 分别标脏对应行 rect（设置行固定 y=EXIT_ROW-ROW_H，与 napps 无关）。 */
|
||
if (cursor == napps || last_cursor == napps)
|
||
meow_dirty_add(8, EXIT_ROW - ROW_H - 4, fb_xres - 16, ROW_H - 8);
|
||
if (state == 0 && napps > 0) {
|
||
if (last_cursor >= 0 && last_cursor < napps)
|
||
meow_dirty_add(8, ROW_TOP + last_cursor * ROW_H - 4, fb_xres - 16, ROW_H - 8);
|
||
if (cursor >= 0 && cursor < napps)
|
||
meow_dirty_add(8, ROW_TOP + cursor * ROW_H - 4, fb_xres - 16, ROW_H - 8);
|
||
}
|
||
last_cursor = cursor;
|
||
need_menu_paint = 1;
|
||
}
|
||
if (toast_active != (toast_ms > 0)) { /* toast start/end */
|
||
toast_active = (toast_ms > 0);
|
||
meow_dirty_add(20, TOAST_Y - 6, fb_xres - 40, 40);
|
||
need_menu_paint = 1;
|
||
}
|
||
if (dirty) { /* 结构变化 → 全帧重画 + 全屏 blit */
|
||
meow_dirty_full();
|
||
need_menu_paint = 1;
|
||
dirty = 0;
|
||
}
|
||
if (need_menu_paint) {
|
||
draw_menu(apps, napps, state, cursor, toast_ms, toast); /* 全画 SDK back_buf（RAM，快） */
|
||
need_menu_paint = 0;
|
||
}
|
||
/* A-1/A-2：呈现统一走 SDK meow_ui_flush()（内含帧率门控；无脏返回，门控未达期保留脏
|
||
* 待下一轮）。fb_norm_buf0 确保 LCDC 显示 buffer0（yoffset 非 0 才 pan，短路无开销）。
|
||
* 不再用 launcher 的 g_ndirty/g_dirty_full 做呈现门——SDK present 自会 no-op 于空脏。 */
|
||
fb_norm_buf0(); /* Bug 3：确保 LCDC 显示 buffer0 */
|
||
meow_ui_flush(); /* M2.16 无闪烁 + M2.16 帧率门控归口 SDK */
|
||
if (toast_ms > 0) {
|
||
toast_ms -= POLL_MS;
|
||
if (toast_ms < 0) toast_ms = 0;
|
||
}
|
||
/* Clock refresh ~1s: redraw ONLY the clock digits (and the right info
|
||
* cell if battery/wifi changed), never the list. */
|
||
if (el - last_status_tick >= 1000) {
|
||
last_status_tick = el;
|
||
meow_sys_light(); /* 同步电量/WiFi/音量进 g_sys */
|
||
draw_clock(); /* M2.17：sb_redraw() 重画整条（时钟+电量/WiFi/音量）并标整条脏 */
|
||
fb_norm_buf0();
|
||
meow_ui_flush(); /* blit 状态栏整条，不动列表 */
|
||
}
|
||
|
||
usleep(POLL_MS * 1000);
|
||
}
|
||
|
||
if (touch_fd >= 0) close(touch_fd);
|
||
/* v6.6: restore the player's frame + pan back BEFORE releasing fb (the
|
||
* player is event-driven and won't redraw on its own — see §18.15).
|
||
* M2.2：仅当存在存活播放器才恢复其帧；MeowOS 常驻主界面（无播放器）绝不
|
||
* 恢复死帧——屏幕保持自绘的应用列表（buffer0），不遗留播放器残帧。 */
|
||
if (had_player) fb_restore_player();
|
||
if (fbfd >= 0) { if (fb_fd == fbfd) fb_fd = -1; close(fbfd); }
|
||
logmsg("menu close (exit=%d meow_mode=%d had_player=%d)", want_exit, meow_mode, had_player);
|
||
}
|
||
|
||
/* ================================================================== */
|
||
/* app launch */
|
||
/* ================================================================== */
|
||
static void on_sigterm(int s) { (void)s; sigterm_flag = 1; }
|
||
|
||
/* Drain pending events from all input devices (non-blocking read to EAGAIN).
|
||
* Called right before launching an app so residual events (the tap/key that
|
||
* selected the row, the hotkey combo's release tail) are consumed before the
|
||
* app opens its own fds. Note: events generated AFTER the drain still reach
|
||
* the app (multicast); the app therefore also drains itself at startup and
|
||
* only exits on a fresh press edge (see hello.c). */
|
||
static void drain_input(void)
|
||
{
|
||
for (int i = 0; i < 4; i++) {
|
||
char dev[32];
|
||
snprintf(dev, sizeof dev, "/dev/input/event%d", i);
|
||
int fd = open(dev, O_RDONLY | O_NONBLOCK);
|
||
if (fd < 0) continue;
|
||
unsigned char ev[16];
|
||
while (read(fd, ev, sizeof ev) == (ssize_t)sizeof ev) { /* discard */ }
|
||
close(fd);
|
||
}
|
||
}
|
||
|
||
/* ---- backlight save/restore ---- */
|
||
static int read_brightness(void)
|
||
{
|
||
int fd = open(BACKLIGHT, O_RDONLY);
|
||
if (fd < 0) return -1;
|
||
char buf[16];
|
||
int n = read(fd, buf, sizeof buf - 1);
|
||
close(fd);
|
||
if (n <= 0) return -1;
|
||
buf[n] = 0;
|
||
return atoi(buf);
|
||
}
|
||
|
||
static void write_file(const char *path, const char *val)
|
||
{
|
||
int fd = open(path, O_WRONLY);
|
||
if (fd < 0) return;
|
||
int l = strlen(val);
|
||
if (write(fd, val, l) < 0)
|
||
logmsg("write %s <- %s: %s", path, val, strerror(errno));
|
||
close(fd);
|
||
}
|
||
|
||
static void write_brightness(int val)
|
||
{
|
||
char buf[8];
|
||
int l = snprintf(buf, sizeof buf, "%d\n", val);
|
||
int fd = open(BACKLIGHT, O_WRONLY);
|
||
if (fd < 0) { logmsg("backlight open fail: %s", strerror(errno)); return; }
|
||
if (write(fd, buf, l) < 0) logmsg("backlight write %d: %s", val, strerror(errno));
|
||
close(fd);
|
||
}
|
||
|
||
/* ================================================================== */
|
||
/* M2.36 阶段 B2b：实体系统设置页（MD3 风格） */
|
||
/* - 入口：应用列表「系统设置」builtin 行（draw_menu 中位于 Exit 行上 */
|
||
/* 方；触摸命中 run_menu 分发到此 run_settings_page）。 */
|
||
/* - 结构：分组列表（显示/电源/开机/输入/字体主题/通知/日志/音频）， */
|
||
/* 全屏单张 surface_variant 圆角卡片，组标题 on_surface_variant 小字。*/
|
||
/* - 控件：开关(SC_SWITCH)/滑条(SC_SLIDER)/选择器(SC_ENUM)/预设路径 */
|
||
/* (SC_PRESET)。所有读写仅走 meow_settings_getXXX / setXXX 接口； */
|
||
/* meow_settings_save()，绝不直接改文件（SYSTEM_SETTINGS §4）。 */
|
||
/* ================================================================== */
|
||
/* M2.36 阶段 B2b：实体系统设置页（MD3 风格） */
|
||
/* - 入口：应用列表「系统设置」builtin 行（draw_menu 中位于 Exit 行上 */
|
||
/* 方；触摸命中 run_menu 分发到此 run_settings_page）。 */
|
||
/* - 结构：分组列表（显示/电源/开机/输入/字体主题/通知/日志/音频）， */
|
||
/* 全屏单张 surface_variant 圆角卡片，组标题 on_surface_variant 小字。*/
|
||
/* - 控件：开关(SC_SWITCH)/滑条(SC_SLIDER)/选择器(SC_ENUM)/预设路径 */
|
||
/* (SC_PRESET)。所有读写仅走 meow_settings_getXXX / setXXX 接口； */
|
||
/* meow_settings_save()，绝不直接改文件（SYSTEM_SETTINGS §4）。 */
|
||
/* - 主题：MD3 color roles（dark/light 两套，接 display.theme），集中 */
|
||
/* 下表，禁止散落硬编码色值（MD3_UI_SPEC §1）。 */
|
||
/* - 交互：音量键=调系统音量 / 电源键=系统级语义（单击=息屏/亮屏、长按=电源菜单、
|
||
8s=强关；不再返回）/ 播放键=抓住（不返回）/ 退出仅靠触摸（底部返回 + 左缘左滑）。*/
|
||
/* 选中行 tonal 高亮（meow_ui_fill_rect_alpha），滑条拖动实时 set_*。 */
|
||
/* 静态展示不主动刷新，仅交互时经 meow_dirty 区标脏 + blit 局部。 */
|
||
/* ================================================================== */
|
||
/* 主题（MD3 color roles）定义已上移到本文件前方状态栏处（M2.44）。 */
|
||
|
||
/* ---- 控件类型 ---- */
|
||
typedef enum { SC_HEADER, SC_SWITCH, SC_SLIDER, SC_ENUM, SC_PRESET, SC_INFO, SC_LIST } sctrl_t;
|
||
/* ---- 一行描述（label+key+控件）；key=NULL 表示分组标题行 ---- */
|
||
typedef struct {
|
||
const char *label;
|
||
const char *key;
|
||
sctrl_t ctrl;
|
||
int min, max, step; /* SC_SLIDER 取值域/步进 */
|
||
const char *const *presets; /* SC_PRESET 选项名 */
|
||
const char *const *preset_labels; /* SC_PRESET 选项中文标签 */
|
||
int preset_n;
|
||
int net_list; /* SC_INFO/SC_LIST 网络信息类别（NET_LIST_*），0=无 */
|
||
} srow_t;
|
||
|
||
/* 网络信息类别（SC_LIST 打开下拉/详情；对应 SMENU「网络」组行） */
|
||
#define NET_LIST_WIFI_SSID 1 /* WiFi 当前连接（只读信息；点开显示详情） */
|
||
#define NET_LIST_WIFI_SAVED 2 /* WiFi 已保存网络（下拉，可 connect） */
|
||
#define NET_LIST_WIFI_SCAN 3 /* 附近WiFi：WiFi 扫描结果（按 BSSID 去重，只读展示） */
|
||
#define NET_LIST_BT_NEARBY 4 /* 蓝牙附近设备（已配对 + 扫描发现；下拉，只读展示） */
|
||
#define NET_LIST_BT_MODE 5 /* 蓝牙当前连接模式（只读信息；对应"蓝牙模式"行，s_net_get 显示） */
|
||
#define NET_LIST_ABOUT 6 /* 系统设置「关于本机」：只读设备信息弹窗（复用 s_dd_modal） */
|
||
#define S_NET_MAX 8 /* 网络下拉一次最多展示项（屏幕高度限制） */
|
||
|
||
/* SC_PRESET 预设表（路径/枚举字符串的"预设项，自定义文件选择留后期"） */
|
||
static const char *const bg_presets[] = { "black", "blue", "green" };
|
||
static const char *const bg_preset_labels[] = { "黑色", "深蓝", "深绿" };
|
||
#define BG_PRESETS_N 3
|
||
static const char *const hk_presets[] = { "power_voldown", "seq" };
|
||
static const char *const hk_preset_labels[] = { "电源+音量减", "连按序列" };
|
||
#define HK_PRESETS_N 2
|
||
static const char *const seq_presets[] = { "volup,volup,volup", "voldown,voldown,voldown" };
|
||
static const char *const seq_preset_labels[] = { "音量上×3", "音量下×3" };
|
||
#define SEQ_PRESETS_N 2
|
||
/* font.file 行（字体文件）不使用编译期静态表：其 presets/preset_labels 指向字体区
|
||
* (font_presets/font_preset_labels, 见本文件字体区) 的运行时动态数组，计数由
|
||
* s_row_presets() 动态返回（默认 1，进设置页扫描 TF 卡后更新）。见 SMENU 行。 */
|
||
static const char *const out_presets[] = { "hw:0,0" };
|
||
static const char *const out_preset_labels[] = { "CS43198 (hw:0,0)" };
|
||
#define OUT_PRESETS_N 1
|
||
|
||
/* M2.37：息屏时间滑条改为「离散档位」而非线性 0~86400 秒（线性步进 1 根本调不到 30s，
|
||
* 上限 24h 过于抽象）。档位 0=常亮；从 5s 起步的细粒度段可精调「30s 左右」，随后按
|
||
* 45s/分/刻/时 跳档，最高 2 时。滑条值 = 档位索引（0..S_TIME_TIERS_N-1，步进 1），
|
||
* 落盘仍写「秒」（display.screen_off_timeout）；索引<->秒双向映射见 s_time_tier_*。 */
|
||
static const int s_time_tiers[] = {
|
||
0, /* 常亮 */
|
||
5, 10, 15, 20, /* 细粒度段：可精确到 30s 附近 */
|
||
30, 45, /* 半分钟/三刻钟 */
|
||
60, 90, 120, 180, /* 1 分 / 1.5 分 / 2 分 / 3 分 */
|
||
300, 600, 900, /* 5 分 / 10 分 / 15 分 */
|
||
1800, /* 30 分 */
|
||
3600, 7200 /* 1 时 / 2 时 */
|
||
};
|
||
#define S_TIME_TIERS_N ((int)(sizeof s_time_tiers / sizeof s_time_tiers[0]))
|
||
|
||
/* 设置页扁平化菜单（分组=组标题行，其余=设置项）。顺序即显示顺序。 */
|
||
/* 分组/键/类型/默认与 SYSTEM_SETTINGS.md §1 一致（新建项四端同步）。 */
|
||
static const srow_t SMENU[] = {
|
||
/* 显示 */
|
||
{ "显示", NULL, SC_HEADER, 0,0,0, NULL,NULL,0 },
|
||
{ "亮度", "display.brightness", SC_SLIDER, 1,100,1, NULL,NULL,0 },
|
||
{ "息屏模式", "display.screen_off_mode", SC_ENUM, 0,0,0, NULL,NULL,0 },
|
||
{ "息屏时间", "display.screen_off_timeout", SC_SLIDER, 0,(S_TIME_TIERS_N-1),1, NULL,NULL,0 },
|
||
{ "刷新率", "display.refresh_rate", SC_ENUM, 0,0,0, NULL,NULL,0 },
|
||
{ "最高刷新率", "display.refresh_always_max", SC_SWITCH, 0,0,0, NULL,NULL,0 },
|
||
/* B2b 主题三方式：标题行「主题」改选 display.theme_mode（手动/时段自动），
|
||
* 手动深浅由下方「主题深浅」(display.theme) 控制；时段两键为分钟滑条(STEP=15)。 */
|
||
{ "主题", "display.theme_mode", SC_ENUM, 0,0,0, NULL,NULL,0 },
|
||
{ "主题深浅", "display.theme", SC_ENUM, 0,0,0, NULL,NULL,0 },
|
||
{ "深色时段开始", "display.theme_dark_start", SC_SLIDER, 0,1439,15, NULL,NULL,0 },
|
||
{ "深色时段结束", "display.theme_dark_end", SC_SLIDER, 0,1439,15, NULL,NULL,0 },
|
||
{ "背景", "display.background", SC_PRESET, 0,0,0, bg_presets, bg_preset_labels, BG_PRESETS_N },
|
||
/* 网络 */
|
||
{ "网络", NULL, SC_HEADER, 0,0,0, NULL,NULL,0 },
|
||
{ "WiFi", "network.wifi_enabled", SC_SWITCH, 0,0,0, NULL,NULL,0 },
|
||
{ "WiFi连接", NULL, SC_LIST, 0,0,0, NULL,NULL,0, NET_LIST_WIFI_SSID },
|
||
{ "已保存网络", NULL, SC_LIST, 0,0,0, NULL,NULL,0, NET_LIST_WIFI_SAVED },
|
||
{ "附近WiFi", NULL, SC_LIST, 0,0,0, NULL,NULL,0, NET_LIST_WIFI_SCAN },
|
||
{ "蓝牙", "network.bluetooth_enabled", SC_SWITCH, 0,0,0, NULL,NULL,0 },
|
||
{ "蓝牙模式", NULL, SC_INFO, 0,0,0, NULL,NULL,0, NET_LIST_BT_MODE },
|
||
{ "蓝牙设备", NULL, SC_LIST, 0,0,0, NULL,NULL,0, NET_LIST_BT_NEARBY },
|
||
/* 电源 */
|
||
{ "电源", NULL, SC_HEADER, 0,0,0, NULL,NULL,0 },
|
||
{ "长按弹菜单", "power.longpress_menu_ms", SC_SLIDER, 500,5000,500, NULL,NULL,0 },
|
||
{ "长按强关", "power.forceoff_ms", SC_SLIDER, 5500,15000,500, NULL,NULL,0 },
|
||
{ "退出热键", "power.defeat_hotkey", SC_PRESET, 0,0,0, hk_presets, hk_preset_labels, HK_PRESETS_N },
|
||
/* 开机 */
|
||
{ "开机", NULL, SC_HEADER, 0,0,0, NULL,NULL,0 },
|
||
{ "默认系统", "boot.default", SC_ENUM, 0,0,0, NULL,NULL,0 },
|
||
{ "显示选单", "boot.menu_enabled", SC_SWITCH, 0,0,0, NULL,NULL,0 },
|
||
{ "选单超时", "boot.timeout_ms", SC_SLIDER, 0,30000,500, NULL,NULL,0 },
|
||
/* 输入 */
|
||
{ "输入", NULL, SC_HEADER, 0,0,0, NULL,NULL,0 },
|
||
{ "热键序列", "input.hotkey_seq", SC_PRESET, 0,0,0, seq_presets, seq_preset_labels, SEQ_PRESETS_N },
|
||
{ "热键窗口", "input.hotkey_window_ms", SC_SLIDER, 0,5000,100, NULL,NULL,0 },
|
||
{ "触摸布防", "input.touch_arm_delay_ms", SC_SLIDER, 0,2000,50, NULL,NULL,0 },
|
||
{ "滑动方向", "input.swipe_invert", SC_SWITCH, 0,0,0, NULL,NULL,0 },
|
||
/* 字体主题 */
|
||
{ "字体主题", NULL, SC_HEADER, 0,0,0, NULL,NULL,0 },
|
||
{ "字体文件", "font.file", SC_PRESET, 0,0,0, font_presets, font_preset_labels, 0 },
|
||
/* M2.5x 字体档位分层/按需大字库：「加载大字库」= font.load_full（int 0/1 默认 0）。
|
||
* 开 → 强制全系统用大字库 gbk≈20k 档（覆盖 app 未声明/覆盖默认 font.file）；
|
||
* 关（默认）→ 小字库 common≈4k，仅 app 声明 fonts:"full" 才大字库。 */
|
||
{ "加载大字库", "font.load_full", SC_SWITCH, 0,0,0, NULL,NULL,0 },
|
||
/* M2.5x 多字体：开关 + 6 个字符类别字体（preset=可用 MeowOS/fonts/<family>/<weight>/ 列表；
|
||
* 值空 = 跟随全局 font.file）。仅开关开启时 6 行可见（s_row_visible）。 */
|
||
{ "多字体", "display.multi_font", SC_SWITCH, 0,0,0, NULL,NULL,0 },
|
||
{ "中文(CJK)", "font.class_cjk", SC_PRESET, 0,0,0, font_presets, font_preset_labels, 0 },
|
||
{ "中文标点", "font.class_cjk_sym", SC_PRESET, 0,0,0, font_presets, font_preset_labels, 0 },
|
||
{ "数字", "font.class_num", SC_PRESET, 0,0,0, font_presets, font_preset_labels, 0 },
|
||
{ "拉丁字母", "font.class_latin", SC_PRESET, 0,0,0, font_presets, font_preset_labels, 0 },
|
||
{ "半角标点", "font.class_latin_sym", SC_PRESET, 0,0,0, font_presets, font_preset_labels, 0 },
|
||
{ "其他字符", "font.class_other", SC_PRESET, 0,0,0, font_presets, font_preset_labels, 0 },
|
||
{ "标题字号", "font.size.title", SC_SLIDER, 16,40,1, NULL,NULL,0 },
|
||
{ "正文字号", "font.size.body", SC_SLIDER, 12,28,1, NULL,NULL,0 },
|
||
{ "UI风格", "ui.style", SC_ENUM, 0,0,0, NULL,NULL,0 },
|
||
/* 通知 */
|
||
{ "通知", NULL, SC_HEADER, 0,0,0, NULL,NULL,0 },
|
||
{ "通知中心", "notify.center_enabled", SC_SWITCH, 0,0,0, NULL,NULL,0 },
|
||
{ "应用配额", "notify.app_quota", SC_SLIDER, 1,64,1, NULL,NULL,0 },
|
||
/* 日志 */
|
||
{ "日志", NULL, SC_HEADER, 0,0,0, NULL,NULL,0 },
|
||
{ "日志级别", "log.level", SC_ENUM, 0,0,0, NULL,NULL,0 },
|
||
{ "写入TF卡", "log.to_card", SC_SWITCH, 0,0,0, NULL,NULL,0 },
|
||
/* 音频 */
|
||
{ "音频", NULL, SC_HEADER, 0,0,0, NULL,NULL,0 },
|
||
{ "音量", "audio.volume", SC_SLIDER, 0,100,1, NULL,NULL,0 },
|
||
{ "音量上限", "audio.volume_max", SC_SLIDER, 0,100,1, NULL,NULL,0 },
|
||
{ "音量跳步", "audio.volume_step", SC_SLIDER, 1,5,1, NULL,NULL,0 },
|
||
{ "输出设备", "audio.output", SC_PRESET, 0,0,0, out_presets, out_preset_labels, OUT_PRESETS_N },
|
||
/* 关于（设置列表最底；「关于本机」点开 s_about_open 弹只读设备信息框） */
|
||
{ "关于", NULL, SC_HEADER, 0,0,0, NULL,NULL,0 },
|
||
{ "关于本机", NULL, SC_LIST, 0,0,0, NULL,NULL,0, NET_LIST_ABOUT },
|
||
};
|
||
#define SMENU_N ((int)(sizeof SMENU / sizeof SMENU[0]))
|
||
|
||
/* 设置页布局（单卡片，行高统一便于整行式滚动对位与裁剪）。
|
||
* SET_CONTENT_H 取 SROW_H 的整数倍（520=10 行），使 scroll 恒为整行步进，
|
||
* 视口内行首行/末行都完整落位，避免部分可见行被画到卡片外（泄漏）。 */
|
||
#define SROW_H 58 /* M2.37：行高 52→58，便于触摸点选 */
|
||
#define SET_CARD_X 8
|
||
#define SET_CARD_W (fb_xres - 16)
|
||
#define SET_CARD_Y 92
|
||
#define SET_CARD_H 536 /* 卡片底 628；视口高 = 536-16 = 520 = 10×52 */
|
||
#define SET_CONTENT_X (SET_CARD_X + 12)
|
||
#define SET_CONTENT_W (SET_CARD_W - 24)
|
||
#define SET_CONTENT_Y (SET_CARD_Y + 8)
|
||
#define SET_CONTENT_H (SET_CARD_H - 16)
|
||
#define SET_CONTENT_BOT (SET_CONTENT_Y + SET_CONTENT_H)
|
||
#define S_SCROLL_SLOP 40 /* px：触摸纵向位移超此值 → 判为列表拖动滚动（非 tap；tap 判定 ady<60） */
|
||
/* M2.39 左缘返回手势已抽为共享函数 meow_edge_back()（meow_touch.h MEOW_EDGE_W/SWIPE 由
|
||
* 其定义），设置页运行期调用；此处不再定义独立 S_EDGE_W/S_SWIPE_THRESH。 */
|
||
|
||
/* 当前选中行若是滑条：记录其 track 纵向位置，供触摸拖动命中判（x/w 为布局常量，
|
||
* 所有滑条行相同，可直接算；仅 y 随行变，故独立记录）。 */
|
||
static int s_sel_track_y = -1;
|
||
/* 滑条 track 布局常量（所有滑条行一致；track 纵向 = 行顶 + 40，由 s_sel_track_y 记录） */
|
||
#define S_SLIDER_X (SET_CARD_X + 16)
|
||
#define S_SLIDER_W (SET_CONTENT_W)
|
||
|
||
/* ---- 行高/位置/导航辅助 ---- */
|
||
/* M2.5x 多字体：6 个「字体文件」行仅在 display.multi_font=1 时可见（开时显示）。
|
||
* 可见性与分组的标题行无关（标题恒显示）。 */
|
||
static int s_row_visible(int i)
|
||
{
|
||
const srow_t *r = &SMENU[i];
|
||
if (r->key && !strncmp(r->key, "font.class_", 11)) {
|
||
int on = 0; meow_settings_get_switch("display.multi_font", &on);
|
||
return on;
|
||
}
|
||
return 1;
|
||
}
|
||
/* 可见行数（= 压缩后占用的行数；标题行计入，隐藏的 class 行不计） */
|
||
static int s_vis_count(void)
|
||
{
|
||
int n = 0;
|
||
for (int i = 0; i < SMENU_N; i++) if (s_row_visible(i)) n++;
|
||
return n;
|
||
}
|
||
/* SMENU 下标 → 压缩位置（第几个可见行）；不可见返回 -1 */
|
||
static int s_vis_of(int i)
|
||
{
|
||
if (i < 0 || i >= SMENU_N || !s_row_visible(i)) return -1;
|
||
int p = 0;
|
||
for (int k = 0; k < i; k++) if (s_row_visible(k)) p++;
|
||
return p;
|
||
}
|
||
/* 压缩位置 → SMENU 下标 */
|
||
static int s_vis_at(int p)
|
||
{
|
||
int c = 0;
|
||
for (int i = 0; i < SMENU_N; i++) if (s_row_visible(i)) { if (c == p) return i; c++; }
|
||
return SMENU_N - 1;
|
||
}
|
||
|
||
static int s_setting_idx(int i) { return i >= 0 && i < SMENU_N && SMENU[i].ctrl != SC_HEADER && s_row_visible(i); }
|
||
static int s_first_setting(void)
|
||
{
|
||
for (int i = 0; i < SMENU_N; i++) if (s_setting_idx(i)) return i;
|
||
return 0;
|
||
}
|
||
static int s_next_setting(int i)
|
||
{
|
||
for (int k = i + 1; k < SMENU_N; k++) if (s_setting_idx(k)) return k;
|
||
return s_first_setting(); /* 回绕 */
|
||
}
|
||
|
||
/* 字体行（font.file + font.class_*）走「family→字重」两级子菜单（M2.6 字重结构） */
|
||
static int s_row_is_font(const srow_t *r)
|
||
{
|
||
return r && r->key && (!strcmp(r->key, "font.file") || !strncmp(r->key, "font.class_", 11));
|
||
}
|
||
|
||
/* SC_PRESET 行取「选项表 + 数量」：字体行（font.file + font.class_*）用运行时动态数组
|
||
* （TF 卡 MeowOS/fonts/<family>/<weight>/ 扫描结果，见字体区 font_presets/font_presets_n），
|
||
* 其余行用编译期静态表（r->presets / r->preset_n）。 */
|
||
static const char *const *s_row_presets(const srow_t *r, int *n)
|
||
{
|
||
if (r && r->key && (!strcmp(r->key, "font.file") || !strncmp(r->key, "font.class_", 11))) {
|
||
if (n) *n = font_presets_n;
|
||
return font_presets;
|
||
}
|
||
if (n) *n = r->preset_n;
|
||
return r->presets;
|
||
}
|
||
|
||
/* 滚动：纯范围钳制到 [0, 内容高度-视口高]（列表拖动滚动用；不强制选中行可见） */
|
||
static int s_clamp_scroll_range(int scroll)
|
||
{
|
||
int total = s_vis_count() * SROW_H;
|
||
if (total <= SET_CONTENT_H) return 0;
|
||
int max_scroll = total - SET_CONTENT_H;
|
||
if (scroll < 0) scroll = 0;
|
||
if (scroll > max_scroll) scroll = max_scroll;
|
||
return scroll;
|
||
}
|
||
|
||
/* 滚动：保证当前选中行在 [SET_CONTENT_Y, SET_CONTENT_BOT] 内 */
|
||
static int s_clamp_scroll(int sel, int scroll)
|
||
{
|
||
scroll = s_clamp_scroll_range(scroll);
|
||
int pos = s_vis_of(sel);
|
||
if (pos < 0) pos = s_vis_of(s_first_setting());
|
||
int top = pos * SROW_H;
|
||
int bot = top + SROW_H;
|
||
if (top < scroll) scroll = top; /* 选中行滑出顶部 → 上滚 */
|
||
if (bot > scroll + SET_CONTENT_H) scroll = bot - SET_CONTENT_H; /* 滑出底部 → 下滚 */
|
||
return s_clamp_scroll_range(scroll);
|
||
}
|
||
|
||
/* 行 y 落在 content 坐标 cy 时对应的行号（压缩位置 → SMENU 下标）；越界返回 -1 */
|
||
static int s_row_at_content_y(int cy)
|
||
{
|
||
if (cy < 0) return -1;
|
||
int pos = cy / SROW_H;
|
||
if (pos >= s_vis_count()) return -1;
|
||
return s_vis_at(pos);
|
||
}
|
||
|
||
/* ---- 值格式化/展示 ---- */
|
||
static void s_fmt_time(int sec, char *buf, int len)
|
||
{
|
||
if (sec <= 0) { snprintf(buf, len, "常亮"); return; }
|
||
if (sec < 60) { snprintf(buf, len, "%d 秒", sec); return; }
|
||
if (sec < 3600) { snprintf(buf, len, "%d 分", sec / 60); return; }
|
||
snprintf(buf, len, "%d 时", sec / 3600);
|
||
}
|
||
/* B2b 主题时段：分钟(0-1439) → "HH:MM"（如 1140→"19:00"）。注意与 s_fmt_time 的秒语义区分。 */
|
||
static void s_fmt_minutes(int mins, char *buf, int len)
|
||
{
|
||
if (mins < 0) mins = 0;
|
||
if (mins > 1439) mins = 1439;
|
||
snprintf(buf, len, "%02d:%02d", mins / 60, mins % 60);
|
||
}
|
||
/* 息屏时间：秒 → 最近档位索引（显示滑动位置用；等值优先，跨档取较近档，平手取高档） */
|
||
static int s_time_tier_idx(int sec)
|
||
{
|
||
if (sec <= s_time_tiers[0]) return 0;
|
||
for (int i = 1; i < S_TIME_TIERS_N; i++) {
|
||
if (sec == s_time_tiers[i]) return i;
|
||
if (sec < s_time_tiers[i]) {
|
||
int lo = s_time_tiers[i - 1], hi = s_time_tiers[i];
|
||
return (sec - lo < hi - sec) ? i - 1 : i;
|
||
}
|
||
}
|
||
return S_TIME_TIERS_N - 1;
|
||
}
|
||
/* 息屏时间：档位索引 → 秒（落盘写给 display.screen_off_timeout 的实值） */
|
||
static int s_time_tier_val(int idx)
|
||
{
|
||
if (idx < 0) idx = 0;
|
||
if (idx >= S_TIME_TIERS_N) idx = S_TIME_TIERS_N - 1;
|
||
return s_time_tiers[idx];
|
||
}
|
||
static void s_fmt_value(const srow_t *r, char *buf, int len)
|
||
{
|
||
int v = 0;
|
||
if (meow_settings_get_int(r->key, &v) != 0) { snprintf(buf, len, "-"); return; }
|
||
if (!strcmp(r->key, "display.screen_off_timeout")) { s_fmt_time(v, buf, len); return; }
|
||
/* B2b 深色时段（分钟 0-1439 → "HH:MM"）；start==end 视为未配置，显示「未设置」 */
|
||
if (!strcmp(r->key, "display.theme_dark_start") || !strcmp(r->key, "display.theme_dark_end")) {
|
||
int s2 = 0, e2 = 0;
|
||
meow_settings_get_int("display.theme_dark_start", &s2);
|
||
meow_settings_get_int("display.theme_dark_end", &e2);
|
||
if (s2 == e2) { snprintf(buf, len, "未设置"); return; }
|
||
s_fmt_minutes(v, buf, len);
|
||
return;
|
||
}
|
||
/* 长按弹菜单/强关：毫秒换算成秒（0.5 步进，如 "2.5 秒"） */
|
||
if (!strcmp(r->key, "power.longpress_menu_ms") || !strcmp(r->key, "power.forceoff_ms")) {
|
||
if (v % 1000 == 0) snprintf(buf, len, "%d 秒", v / 1000);
|
||
else snprintf(buf, len, "%.1f 秒", v / 1000.0);
|
||
return;
|
||
}
|
||
snprintf(buf, len, "%d", v);
|
||
}
|
||
static void s_display_value(const srow_t *r, char *buf, int len)
|
||
{
|
||
if (r->ctrl == SC_ENUM) {
|
||
int idx = 0;
|
||
if (meow_settings_get_enum(r->key, &idx) != 0) idx = 0;
|
||
if (meow_settings_enum_label(r->key, idx, buf, len) != 0) snprintf(buf, len, "-");
|
||
return;
|
||
}
|
||
/* SC_PRESET */
|
||
char cur[MEOW_SET_MAX_LEN];
|
||
if (meow_settings_get_str(r->key, cur, sizeof cur) != 0) { snprintf(buf, len, "-"); return; }
|
||
/* M2.5x 多字体：class 行空值 = 跟随全局 font.file */
|
||
if (r->key && !strncmp(r->key, "font.class_", 11) && !cur[0]) {
|
||
snprintf(buf, len, "跟随全局");
|
||
return;
|
||
}
|
||
int pn = 0;
|
||
const char *const *pps = s_row_presets(r, &pn);
|
||
for (int i = 0; i < pn; i++) {
|
||
if (!strcmp(pps[i], cur)) {
|
||
snprintf(buf, len, "%s", (r->preset_labels && r->preset_labels[i][0]) ? r->preset_labels[i] : cur);
|
||
return;
|
||
}
|
||
}
|
||
snprintf(buf, len, "%s", cur);
|
||
}
|
||
|
||
/* ===== M2.39/M2.40 网络/WiFi/蓝牙（设置页「网络」分组）=====
|
||
* 背景：launcher 已读 wlan0 operstate（wlan_connected）/ hci_powered（hciconfig UP）。
|
||
* 本组在设置页内做 WiFi/蓝牙开关 + 当前连接 SSID + 已保存网络 + 附近WiFi（WiFi 扫描，
|
||
* 按 BSSID 去重）+ 蓝牙设备（已配对 + 附近扫描发现）。读取全部经带超时 popen（wpa_cli/
|
||
* bluetoothctl 在 supplicant/BlueZ 未跑时可能挂起），绝不阻塞主循环；WiFi/蓝牙扫描均异步
|
||
* （先触发、后读缓存/结果），超时余量。开关/计数/列表只读展示走 meow_settings 新键
|
||
* network.wifi_enabled/network.bluetooth_enabled。
|
||
* M2.40：wpa_cli 对非 ASCII（中文）SSID 输出转义文字 \xNN，新增 wpa_decode_ssid() 还原成
|
||
* 真实 UTF-8 字节；net_wifi_scan 按 BSSID 去重（同 BSSID 只留一条，优先具名）；蓝牙附近
|
||
* 扫描经后台有界 bluetoothctl 写 /tmp 缓存（system() 尾部 & 立即返回，不阻塞主循环）。
|
||
* 设计：绘制路径只读缓存（g_net_*，s_net_refresh 刷新一次），下拉打开时才重新 popen 解析，
|
||
* 避免绘制热点反复 spawn。 */
|
||
|
||
/* 带超时跑一条命令并读 stdout（防 wpa_supplicant/BlueZ 未跑时命令挂起）。
|
||
* 返回 malloc 字符串（调用方 free）；超时/失败返回 NULL；子进程超时被 SIGKILL。 */
|
||
static char *popen_read_tmo(int tmo_ms, const char *cmd)
|
||
{
|
||
int fds[2];
|
||
if (pipe(fds) != 0) return NULL;
|
||
pid_t pid = fork();
|
||
if (pid < 0) { close(fds[0]); close(fds[1]); return NULL; }
|
||
if (pid == 0) {
|
||
close(fds[0]);
|
||
dup2(fds[1], 1);
|
||
dup2(fds[1], 2);
|
||
close(fds[1]);
|
||
execl("/bin/sh", "sh", "-c", cmd, (char *)NULL);
|
||
_exit(127);
|
||
}
|
||
close(fds[1]);
|
||
int fd = fds[0];
|
||
int fl = fcntl(fd, F_GETFL, 0);
|
||
fcntl(fd, F_SETFL, fl | O_NONBLOCK);
|
||
char *out = NULL; size_t cap = 0, len = 0;
|
||
char tmp[256];
|
||
int done = 0;
|
||
unsigned long long deadline = now_ms() + tmo_ms;
|
||
while (!done) {
|
||
struct pollfd pfd = { fd, POLLIN, 0 };
|
||
int pr = poll(&pfd, 1, 25);
|
||
if (pr < 0) break;
|
||
if (pr == 0) { if (now_ms() > deadline) break; continue; }
|
||
ssize_t r = read(fd, tmp, sizeof tmp);
|
||
if (r > 0) {
|
||
if (len + (size_t)r + 1 > cap) {
|
||
size_t nc = cap ? cap * 2 : 512;
|
||
char *nn = realloc(out, nc);
|
||
if (!nn) { free(out); out = NULL; break; }
|
||
out = nn; cap = nc;
|
||
}
|
||
memcpy(out + len, tmp, (size_t)r); len += (size_t)r; out[len] = 0;
|
||
} else if (r == 0) {
|
||
done = 1;
|
||
} else if (errno != EAGAIN && errno != EWOULDBLOCK) {
|
||
done = 1;
|
||
}
|
||
}
|
||
/* 子进程收尸：已退出则不杀；仍在跑（读到 EOF 前超时）则 SIGKILL，防僵尸。 */
|
||
int status = 0;
|
||
pid_t rp = waitpid(pid, &status, WNOHANG);
|
||
if (rp == 0) { kill(pid, SIGKILL); waitpid(pid, &status, 0); }
|
||
close(fd);
|
||
return out;
|
||
}
|
||
|
||
/* 已保存网络 / 扫描结果 / 蓝牙设备名称列表（用于下拉展示与连接动作） */
|
||
typedef struct { int id; char name[48]; } meow_net_t;
|
||
|
||
/* 十六进制字符值（'0'-'9'/'a'-'f'/'A'-'F'）；非法返回 -1。避免依赖 ctype.h（musl/内存受限）。
|
||
* M2.40：wpa_cli 对非 ASCII SSID 输出 "\xNN" 转义文字（`\`+x+两位hex 的纯文字，非真字节），
|
||
* 需先还原成真实 UTF-8 字节才能进界面文本。 */
|
||
static int hex_val(char c)
|
||
{
|
||
if (c >= '0' && c <= '9') return c - '0';
|
||
if (c >= 'a' && c <= 'f') return c - 'a' + 10;
|
||
if (c >= 'A' && c <= 'F') return c - 'A' + 10;
|
||
return -1;
|
||
}
|
||
|
||
/* wpa_decode_ssid：把 wpa_cli 的 "\xNN" 转义文字还原成真实字节（\xe5\xa4\xa9… = "天…"）。
|
||
* 遇 `\x`+两位合法 hex → 拼一字节；普通字符原样拷贝；dlen 为 dst 容量（含 NUL）。
|
||
* 无 \x 的纯 ASCII 名（如 "<ssid>"）原样通过。 */
|
||
static void wpa_decode_ssid(const char *src, char *dst, int dlen)
|
||
{
|
||
int o = 0;
|
||
while (*src && o < dlen - 1) {
|
||
if (src[0] == '\\' && src[1] == 'x' &&
|
||
hex_val(src[2]) >= 0 && hex_val(src[3]) >= 0) {
|
||
dst[o++] = (char)((hex_val(src[2]) << 4) | hex_val(src[3]));
|
||
src += 4;
|
||
} else {
|
||
dst[o++] = *src++;
|
||
}
|
||
}
|
||
dst[o] = 0;
|
||
}
|
||
|
||
/* 通用选择器下拉（定义在 s_net_open 之后）；网络列表复用同款模态 */
|
||
static int s_dd_modal(const char *title, const char *item[S_NET_MAX], int n, int cur);
|
||
|
||
|
||
/* 取 WiFi 当前连接 SSID（wpa_cli -i wlan0 status 的 ssid= 行）；未连接返回空串 */
|
||
static void net_wifi_ssid(char *buf, int len)
|
||
{
|
||
buf[0] = 0;
|
||
if (!wlan_connected()) return;
|
||
char *o = popen_read_tmo(1200, "PATH=/bin:/sbin:/usr/bin:/usr/sbin wpa_cli -i wlan0 status 2>/dev/null");
|
||
if (!o) return;
|
||
char *s = strstr(o, "ssid=");
|
||
if (s) {
|
||
s += 5;
|
||
char *e = s; while (*e && *e != '\n' && *e != '\r') e++;
|
||
int l = (int)(e - s);
|
||
/* M2.40：status 的 ssid= 同样可能是中文 \xNN 转义文字，还原成真实 UTF-8 字节 */
|
||
char raw[128];
|
||
if (l > (int)sizeof raw - 1) l = (int)sizeof raw - 1;
|
||
memcpy(raw, s, (size_t)l); raw[l] = 0;
|
||
wpa_decode_ssid(raw, buf, len);
|
||
}
|
||
free(o);
|
||
}
|
||
|
||
/* 当前 WiFi 连接详情（点开「WiFi连接」行展示）：解析 wpa_cli status + 路由网关。
|
||
* 填充 info[][48]（调用方提供的二维缓冲），每行 "标签: 值"，返回行数(≤max)。
|
||
* 当前SSID / AP MAC(bssid) / 本机MAC(address) / AP IP(默认网关) / 本机IP(ip_address) / 频道freq。
|
||
* 未连接返回 0（调用方显示"未连接"）。绝不阻塞：popen 带超时。 */
|
||
static int net_wifi_info(char (*info)[48], int max)
|
||
{
|
||
if (!wlan_connected()) return 0;
|
||
char *o = popen_read_tmo(1500,
|
||
"PATH=/bin:/sbin:/usr/bin:/usr/sbin wpa_cli -i wlan0 status 2>/dev/null; ip route 2>/dev/null | grep default");
|
||
if (!o) return 0;
|
||
char ssid[64] = "", bssid[24] = "", addr[24] = "", ip[32] = "", freq[16] = "", gw[32] = "";
|
||
char *p = o;
|
||
while (p && *p) {
|
||
char *e = strchr(p, '\n'); if (e) *e = 0;
|
||
if (!strncmp(p, "ssid=", 5)) { char raw[128]; snprintf(raw, sizeof raw, "%s", p + 5); wpa_decode_ssid(raw, ssid, sizeof ssid); }
|
||
else if (!strncmp(p, "bssid=", 6)) snprintf(bssid, sizeof bssid, "%s", p + 6);
|
||
else if (!strncmp(p, "address=", 8)) snprintf(addr, sizeof addr, "%s", p + 8);
|
||
else if (!strncmp(p, "ip_address=", 11)) snprintf(ip, sizeof ip, "%s", p + 11);
|
||
else if (!strncmp(p, "freq=", 5)) snprintf(freq, sizeof freq, "%s", p + 5);
|
||
else if (!strncmp(p, "default via ", 11)) { char *s = p + 11; char *g = s; while (*g && *g != ' ') g++; snprintf(gw, sizeof gw, "%s", s); }
|
||
p = e ? e + 1 : NULL;
|
||
}
|
||
free(o);
|
||
int n = 0;
|
||
if (n < max && ssid[0]) snprintf(info[n++], 48, "SSID: %s", ssid);
|
||
if (n < max && bssid[0]) snprintf(info[n++], 48, "AP MAC: %s", bssid);
|
||
if (n < max && addr[0]) snprintf(info[n++], 48, "本机MAC: %s", addr);
|
||
if (n < max && gw[0]) snprintf(info[n++], 48, "AP IP: %s", gw);
|
||
if (n < max && ip[0]) snprintf(info[n++], 48, "本机IP: %s", ip);
|
||
if (n < max && freq[0]) snprintf(info[n++], 48, "频道: %s MHz", freq);
|
||
return n;
|
||
}
|
||
|
||
/* 已保存网络（wpa_cli -i wlan0 list_networks）：首行为表头，其余每行 "<id>\t<ssid>\t<bssid>\t<flag>"。
|
||
* 填 out[i].id/.name（SSID，中文经 wpa_decode_ssid 还原 \xNN），返回项数（≤max）。 */
|
||
static int net_wifi_saved(meow_net_t *out, int max)
|
||
{
|
||
int n = 0;
|
||
char *o = popen_read_tmo(1500, "PATH=/bin:/sbin:/usr/bin:/usr/sbin wpa_cli -i wlan0 list_networks 2>/dev/null");
|
||
if (!o) return 0;
|
||
char *line = strchr(o, '\n');
|
||
if (line) line++; /* 跳表头 */
|
||
while (line && *line && n < max) {
|
||
char *eol = strchr(line, '\n');
|
||
if (eol) *eol = 0;
|
||
char *p = line; while (*p == ' ' || *p == '\t') p++;
|
||
if (*p && *p != '#') {
|
||
int id = atoi(p);
|
||
char *sp = p; while (*sp && *sp != ' ' && *sp != '\t') sp++;
|
||
while (*sp == ' ' || *sp == '\t') sp++;
|
||
char *se = sp; while (*se && *se != ' ' && *se != '\t' && *se != '\n' && *se != '\r') se++;
|
||
if (sp != se) {
|
||
/* M2.40：list_networks 对中文 SSID 输出 \xNN 转义文字（如 \xe5\xa4\xa9… = "天…"），
|
||
* 先拷进临时缓冲再还原成真实 UTF-8 字节存入 name，否则界面显示超长乱码。 */
|
||
char raw[160];
|
||
int l = (int)(se - sp);
|
||
if (l > (int)sizeof raw - 1) l = (int)sizeof raw - 1;
|
||
memcpy(raw, sp, (size_t)l); raw[l] = 0;
|
||
out[n].id = id;
|
||
wpa_decode_ssid(raw, out[n].name, sizeof out[n].name);
|
||
n++;
|
||
}
|
||
}
|
||
line = eol ? eol + 1 : NULL;
|
||
}
|
||
free(o);
|
||
return n;
|
||
}
|
||
|
||
/* WiFi 扫描触发（异步：wpa_cli scan 只是通知 supplicant 发起扫描，立即返回）。
|
||
* 结果稍后经 net_wifi_scan() 读。 */
|
||
static void net_wifi_scan_trigger(void)
|
||
{
|
||
if (!wlan_connected()) return;
|
||
system("PATH=/bin:/sbin:/usr/bin:/usr/sbin wpa_cli -i wlan0 scan 2>/dev/null");
|
||
}
|
||
|
||
/* 读 WiFi 扫描结果（wpa_cli -i wlan0 scan_results）：首行列头，数据行形如
|
||
* <bssid> <freq> <signal> [flags..] [ssid...]
|
||
* flags 恒以 '[' 起；SSID 为 flags 后的整段余量（可含空格；为空=隐藏网络）。
|
||
* M2.40：同一 AP 常出现多条（不同频段/空 SSID/重名），按 BSSID 去重——每个 BSSID 只留一条，
|
||
* 优先采用含完整 SSID 的行（后到且有 SSID 则覆盖先到的空 SSID 行），隐藏网络显示 "(隐藏网络)"。
|
||
* 填 out[i].id=-1；name 存 SSID（或隐藏标记）。返回项数（≤max，且 ≤S_NET_MAX）。 */
|
||
static int net_wifi_scan(meow_net_t *out, int max)
|
||
{
|
||
int n = 0;
|
||
if (max > S_NET_MAX) max = S_NET_MAX;
|
||
char *o = popen_read_tmo(2500, "PATH=/bin:/sbin:/usr/bin:/usr/sbin wpa_cli -i wlan0 scan_results 2>/dev/null");
|
||
if (!o) return 0;
|
||
char seen_bssid[S_NET_MAX][24];
|
||
int named[S_NET_MAX] = {0};
|
||
char *line = strchr(o, '\n');
|
||
if (line) line++;
|
||
while (line && *line && n < max) {
|
||
char *eol = strchr(line, '\n');
|
||
if (eol) *eol = 0;
|
||
char *p = line; while (*p == ' ' || *p == '\t') p++;
|
||
if (*p) {
|
||
/* 首 token = bssid */
|
||
char bssid[24] = "";
|
||
{ char *b = p; while (*p && *p != ' ' && *p != '\t') p++;
|
||
int l = (int)(p - b); if (l > 22) l = 22; memcpy(bssid, b, (size_t)l); bssid[l] = 0; }
|
||
/* 找 flags（首个以 '[' 起始的 token），之后（trim 掉前导空白）才是 SSID */
|
||
const char *ssid = "";
|
||
char *br = strchr(p, '[');
|
||
if (br) {
|
||
char *q = br;
|
||
while (*q) {
|
||
while (*q == ' ' || *q == '\t') q++;
|
||
if (*q == '[') { while (*q && *q != ' ' && *q != '\t') q++; }
|
||
else break;
|
||
}
|
||
ssid = q;
|
||
while (*ssid == ' ' || *ssid == '\t') ssid++;
|
||
}
|
||
/* SSID 去尾部空白/换行 */
|
||
char *se = (char *)ssid;
|
||
while (*se && *se != '\n' && *se != '\r') se++;
|
||
while (se > ssid && (se[-1] == ' ' || se[-1] == '\t')) se--;
|
||
int has = (se > ssid && *ssid);
|
||
/* 去重：同一 BSSID 只留一条，优先具名 SSID */
|
||
int idx = -1;
|
||
for (int j = 0; j < n; j++) if (!strcmp(seen_bssid[j], bssid)) { idx = j; break; }
|
||
if (idx < 0) {
|
||
if (n >= max) { line = eol ? eol + 1 : NULL; continue; }
|
||
idx = n++;
|
||
strncpy(seen_bssid[idx], bssid, sizeof seen_bssid[idx] - 1);
|
||
seen_bssid[idx][sizeof seen_bssid[idx] - 1] = 0;
|
||
named[idx] = has;
|
||
out[idx].id = -1;
|
||
if (has) {
|
||
/* M2.41：扫描结果 SSID 也可能是 wpa_cli 的 \xNN 转义（中文），还原成真 UTF-8 */
|
||
char raw[96];
|
||
int l = (int)(se - ssid); if (l > (int)sizeof raw - 1) l = (int)sizeof raw - 1;
|
||
memcpy(raw, ssid, (size_t)l); raw[l] = 0;
|
||
wpa_decode_ssid(raw, out[idx].name, sizeof out[idx].name);
|
||
} else {
|
||
snprintf(out[idx].name, sizeof out[idx].name, "(隐藏网络)");
|
||
}
|
||
} else if (has && !named[idx]) {
|
||
/* 同 BSSID 先出现无 SSID 行、后有具名行 → 用后者 SSID 覆盖（解码 \xNN） */
|
||
char raw[96];
|
||
int l = (int)(se - ssid); if (l > (int)sizeof raw - 1) l = (int)sizeof raw - 1;
|
||
memcpy(raw, ssid, (size_t)l); raw[l] = 0;
|
||
wpa_decode_ssid(raw, out[idx].name, sizeof out[idx].name);
|
||
named[idx] = 1;
|
||
}
|
||
}
|
||
line = eol ? eol + 1 : NULL;
|
||
}
|
||
free(o);
|
||
return n;
|
||
}
|
||
|
||
/* 蓝牙已配对设备（bluetoothctl paired-devices）：每行 "Device <MAC> <Name>"。
|
||
* hci 未上电则返回 0（避免 spawn bluetoothctl 白跑）。 */
|
||
static int net_bt_paired(meow_net_t *out, int max)
|
||
{
|
||
if (!hci_powered()) return 0;
|
||
int n = 0;
|
||
char *o = popen_read_tmo(1800, "bluetoothctl paired-devices 2>/dev/null");
|
||
if (!o) return 0;
|
||
char *line = o;
|
||
while (line && *line && n < max) {
|
||
char *eol = strchr(line, '\n');
|
||
if (eol) *eol = 0;
|
||
char *p = strstr(line, "Device ");
|
||
if (p) {
|
||
p += 7;
|
||
char *mac = p; while (*mac && *mac != ' ' && *mac != '\t') mac++;
|
||
char *nm = mac; while (*nm == ' ' || *nm == '\t') nm++;
|
||
/* 设备名每行即名称 token；名称可含空格，这里取整行剩余部分（含 MAC 后的名字） */
|
||
if (*nm)
|
||
snprintf(out[n].name, sizeof out[n].name, "%s", nm);
|
||
else {
|
||
int ml = (int)(mac - p); if (ml > 47) ml = 47;
|
||
memcpy(out[n].name, p, (size_t)ml); out[n].name[ml] = 0;
|
||
}
|
||
out[n].id = -1;
|
||
n++;
|
||
}
|
||
line = eol ? eol + 1 : NULL;
|
||
}
|
||
free(o);
|
||
return n;
|
||
}
|
||
|
||
/* ---- 蓝牙附近设备（未配对扫描发现；异步，不阻塞主循环）----
|
||
* M2.40：用户要的「附近的设备」= 蓝牙扫描发现（含未配对），而不只是已配对。扫描较慢（2-6s），
|
||
* 故后台有界驱动 bluetoothctl：scan on → sleep 4 → scan off → devices → quit，输出写 /tmp 缓存；
|
||
* system() 因尾部 & 立即返回（约 5s 后自灭），绝不卡死主循环。读取端 net_bt_scan 只解析缓存
|
||
* （bluetoothctl `devices` 行 "Device <MAC> <Name>"，含已配对+未配对发现，去重）。 */
|
||
static long g_bt_scan_ms = 0; /* 最近一次发起扫描的 now_ms()；0=从未 */
|
||
|
||
static void net_bt_scan_trigger(void)
|
||
{
|
||
if (!hci_powered()) return;
|
||
long t = (long)now_ms();
|
||
if (g_bt_scan_ms && t - g_bt_scan_ms < 7000) return; /* 7s 内不重复触发，防堆积 */
|
||
g_bt_scan_ms = t;
|
||
system("(sleep 1; echo 'scan on'; sleep 4; echo 'scan off'; echo 'devices'; echo 'quit') | bluetoothctl > /tmp/meow_bt_scan.txt 2>&1 &");
|
||
}
|
||
|
||
/* 读蓝牙附近设备缓存：解析 bluetoothctl `devices` 输出（"Device <MAC> <Name>"，去重；含已配对
|
||
* 与未配对但已发现的设备）。缓存不存在/为空则退回已配对列表（保证至少展示已知设备）。
|
||
* 返回项数（≤max，且 ≤S_NET_MAX）。 */
|
||
static int net_bt_scan(meow_net_t *out, int max)
|
||
{
|
||
if (!hci_powered()) return 0;
|
||
if (max > S_NET_MAX) max = S_NET_MAX;
|
||
int n = 0;
|
||
FILE *f = fopen("/tmp/meow_bt_scan.txt", "r");
|
||
if (f) {
|
||
char line[256];
|
||
char seen[S_NET_MAX][24];
|
||
while (fgets(line, sizeof line, f)) {
|
||
char *p = line; while (*p == ' ' || *p == '\t') p++;
|
||
/* 认两种行：`devices` 输出的 "Device <MAC> <Name>"；发现会话里的 "[NEW] Device <MAC> <Name>"。
|
||
* 跳过 [CHG]/[DEL] 等属性/移除行（无稳定名称）。 */
|
||
char *dv = NULL;
|
||
if (!strncmp(p, "Device ", 7)) dv = p + 7;
|
||
else if (!strncmp(p, "[NEW] Device ", 13)) dv = p + 13;
|
||
if (!dv) continue;
|
||
char *mac = dv; while (*mac && *mac != ' ' && *mac != '\t' && *mac != '\n' && *mac != '\r') mac++;
|
||
int ml = (int)(mac - dv);
|
||
if (ml < 6 || !memchr(dv, ':', (size_t)ml)) continue; /* 需像 MAC（含冒号）；过滤属性行 */
|
||
/* 去重（同 MAC 只留一条，取首个出现） */
|
||
int dup = 0;
|
||
for (int j = 0; j < n; j++) if (!strncmp(seen[j], dv, (size_t)ml)) { dup = 1; break; }
|
||
if (dup) continue;
|
||
if (n >= max) break;
|
||
char *nm = mac; while (*nm == ' ' || *nm == '\t') nm++;
|
||
char *e = nm; while (*e && *e != '\n' && *e != '\r') e++;
|
||
*e = 0; /* 去行尾换行 */
|
||
strncpy(seen[n], dv, (size_t)ml); seen[n][ml] = 0;
|
||
if (*nm)
|
||
snprintf(out[n].name, sizeof out[n].name, "%s", nm);
|
||
else {
|
||
int l = ml; if (l > 47) l = 47;
|
||
memcpy(out[n].name, dv, (size_t)l); out[n].name[l] = 0;
|
||
}
|
||
out[n].id = -1;
|
||
n++;
|
||
}
|
||
fclose(f);
|
||
if (n > 0) return n;
|
||
}
|
||
return net_bt_paired(out, max); /* 无扫描缓存 → 退回已配对列表 */
|
||
}
|
||
|
||
/* ---- 蓝牙角色判定（M2.48：状态栏多态 + 设置页"蓝牙模式"行）----
|
||
* 返回 BT_ROLE_*；desc 非空则写中文描述（供设置页只读行展示）。全部 popen 带超时，绝不阻塞。
|
||
* 判定（best-effort，蓝牙栈=BlueZ 5.54）：
|
||
* 关 ：hci0 不存在或 DOWN（hci_powered）。
|
||
* 开未连接：hciconfig UP 但 hcitool con 无 ACL 连接。
|
||
* 主模式 ：有 ACL 连接（连了外围设备如耳机）；设备侧 A2DP sink 命中 → 主。
|
||
* 从模式 ：有 ACL 连接且设备侧 A2DP source 命中（远端接入，设备被当耳机用）。
|
||
* 注：master/slave 依赖 bluealsa-cli a2dp list 端点角色，其输出随固件格式不同；解析不到时，
|
||
* 有 ACL 一律按「主模式」兜底（仍可靠区分 关/开未连接/已连接三态）。若真机 a2dp 角色
|
||
* 与注释相反，只需交换 a2dp_side() 的 1/2 返回值即可。 */
|
||
static void copy_utf8_trunc(char *dst, int dlen, const char *src)
|
||
{
|
||
int o = 0;
|
||
while (*src && o < dlen - 1) {
|
||
unsigned char c = (unsigned char)*src;
|
||
int nb = 1;
|
||
if ((c & 0xE0) == 0xC0) nb = 2;
|
||
else if ((c & 0xF0) == 0xE0) nb = 3;
|
||
else if ((c & 0xF8) == 0xF0) nb = 4;
|
||
if (o + nb > dlen - 1) break; /* 放不下整个字符就停（不截半字符） */
|
||
for (int k = 0; k < nb; k++) { if (!src[k]) break; dst[o++] = src[k]; }
|
||
src += nb;
|
||
}
|
||
dst[o] = 0;
|
||
}
|
||
|
||
/* A2DP 段端点角色：1=设备侧 sink（主模式），2=设备侧 source（从模式），-1=无法判定。
|
||
* 宽松匹配：同段内出现 connected/running 且出现对应角色词。优先认 BlueALSA 对象路径
|
||
* a2dpsnk/a2dpsrc（跨版本稳定），再退到 source/sink/source 单词。 */
|
||
static int a2dp_side(const char *sec)
|
||
{
|
||
if (!sec) return -1;
|
||
if (!strstr(sec, "connected") && !strstr(sec, "running")) return -1;
|
||
int src = (strstr(sec, "a2dpsrc") || strstr(sec, "source") || strstr(sec, "Source")) ? 1 : 0;
|
||
int snk = (strstr(sec, "a2dpsnk") || strstr(sec, "sink") ||
|
||
strstr(sec, "Sink") || strstr(sec, "target")) ? 1 : 0;
|
||
if (src && !snk) return 2; /* 设备侧 source → 被当耳机（从） */
|
||
if (snk && !src) return 1; /* 设备侧 sink → 送流给外围（主） */
|
||
return -1;
|
||
}
|
||
|
||
/* 蓝牙角色：见上方注释。一次 popen 拿 ACL + A2DP + 已连设备名三类信息，避免反复 spawn。 */
|
||
static int bt_role(char *desc, int len)
|
||
{
|
||
if (desc && len > 0) desc[0] = 0;
|
||
if (!g_sys.bt_seen || !hci_powered()) {
|
||
if (desc && len > 0) snprintf(desc, len, "关闭");
|
||
return BT_ROLE_OFF;
|
||
}
|
||
/* 快的放前（HCI 连接、A2DP 端点），bluetoothctl 最慢放最后；整体超时防挂起（超时 SIGKILL）。 */
|
||
char *o = popen_read_tmo(1800,
|
||
"PATH=/bin:/sbin:/usr/bin:/usr/sbin hcitool con 2>/dev/null; "
|
||
"echo '===A2DP==='; bluealsa-cli a2dp list 2>/dev/null; "
|
||
"echo '===NAMES==='; printf 'devices Connected\\nquit\\n' | bluetoothctl 2>/dev/null");
|
||
if (!o) { /* 探测失败：保守按「开未连接」 */
|
||
if (desc && len > 0) snprintf(desc, len, "开启未连接");
|
||
return BT_ROLE_ON_NO_CONN;
|
||
}
|
||
/* 按标记分节（把标记首字符置 0 切断） */
|
||
char *s_acl = o;
|
||
char *s_a2dp = NULL, *s_names = NULL;
|
||
char *p = strstr(o, "===A2DP===");
|
||
if (p) { *p = 0; s_a2dp = p + 10; } /* "===A2DP===" 长 10 */
|
||
if (s_a2dp) { char *q = strstr(s_a2dp, "===NAMES==="); if (q) { *q = 0; s_names = q + 11; } }
|
||
else { char *q = strstr(o, "===NAMES==="); if (q) { *q = 0; s_names = q + 11; } }
|
||
/* ACL：hcitool con 的连接行含 "ACL <MAC>"（如 " < ACL 00:1A:.. handle.. state.. lm MASTER"） */
|
||
int has_acl = 0;
|
||
{
|
||
char *line = s_acl;
|
||
while (line && *line) {
|
||
char *eol = strchr(line, '\n'); if (eol) *eol = 0;
|
||
if (strstr(line, "ACL") && strchr(line, ':')) { has_acl = 1; break; }
|
||
line = eol ? eol + 1 : NULL;
|
||
}
|
||
}
|
||
/* 已连设备名（bluetoothctl `devices Connected`："Device <MAC> <Name>"，取首个）。
|
||
* 定长 22：配合「从模式·被连(耳机…」前缀（UTF-8 约 25B）仍落在展示缓冲 48B 内。
|
||
* 同时也作「已连接」的第二证据（hcitool 缺失时 bluetoothctl 兜底）。 */
|
||
char dev[22] = "";
|
||
int has_conn = has_acl;
|
||
if (s_names) {
|
||
char *line = s_names;
|
||
while (line && *line) {
|
||
char *eol = strchr(line, '\n'); if (eol) *eol = 0;
|
||
char *q = line; while (*q == ' ' || *q == '\t') q++;
|
||
if (!strncmp(q, "Device ", 7)) {
|
||
has_conn = 1; /* bluetoothctl 也确认有设备已连 */
|
||
if (!dev[0]) {
|
||
q += 7;
|
||
char *mac = q; while (*mac && *mac != ' ' && *mac != '\t' &&
|
||
*mac != '\n' && *mac != '\r') mac++;
|
||
char *nm = mac; while (*nm == ' ' || *nm == '\t') nm++;
|
||
char *e = nm; while (*e && *e != '\n' && *e != '\r') e++;
|
||
*e = 0;
|
||
if (*nm) copy_utf8_trunc(dev, sizeof dev, nm);
|
||
else copy_utf8_trunc(dev, sizeof dev, q);
|
||
}
|
||
}
|
||
line = eol ? eol + 1 : NULL;
|
||
}
|
||
}
|
||
int side = a2dp_side(s_a2dp);
|
||
int role;
|
||
if (!has_conn) role = BT_ROLE_ON_NO_CONN;
|
||
else if (side == 2) role = BT_ROLE_SLAVE; /* 设备侧 source → 被当耳机 */
|
||
else role = BT_ROLE_MASTER; /* sink 或 a2dp 不明但有连接 → 主 */
|
||
if (desc && len > 0) {
|
||
if (role == BT_ROLE_ON_NO_CONN) snprintf(desc, len, "开启未连接");
|
||
else if (role == BT_ROLE_SLAVE) snprintf(desc, len, "从模式·被连(耳机%s%s)",
|
||
dev[0] ? " " : "", dev);
|
||
else snprintf(desc, len, "主模式·已连%s%s",
|
||
dev[0] ? " " : "", dev[0] ? dev : "设备");
|
||
}
|
||
free(o);
|
||
return role;
|
||
}
|
||
|
||
/* 节流重探蓝牙角色（约 5s 一次；force=1 立即）。结果写 g_sys.bt_role + g_bt_mode，
|
||
* 并同步 g_sys.bt_on/bt_seen，保证状态栏与本行一致。蓝牙关时免费（只 spawn hciconfig）。 */
|
||
static long g_bt_role_ms = 0; /* 最近一次 bt_role 探测的 now_ms()；0=从未 */
|
||
static void bt_role_refresh(int force)
|
||
{
|
||
if (!force && g_bt_role_ms && (now_ms() - g_bt_role_ms) < 5000) return;
|
||
g_bt_role_ms = now_ms();
|
||
char d[48];
|
||
g_sys.bt_role = bt_role(d, sizeof d);
|
||
snprintf(g_bt_mode, sizeof g_bt_mode, "%s", d);
|
||
g_sys.bt_seen = access("/sys/class/bluetooth/hci0", F_OK) == 0;
|
||
g_sys.bt_on = (g_sys.bt_role != BT_ROLE_OFF) ? 1 : 0;
|
||
}
|
||
|
||
/* 网络信息缓存（绘制路径只读，s_net_refresh 刷新；下拉打开时才重新解析列表） */
|
||
static char g_net_ssid[64] = "未连接";
|
||
static int g_net_saved_n = 0;
|
||
static int g_net_scan_n = 0;
|
||
static int g_net_bt_n = 0;
|
||
|
||
/* 刷新网络信息缓存（进入设置页 / 网络动作后调用；含一次 WiFi 扫描触发） */
|
||
static void s_net_refresh(void)
|
||
{
|
||
if (wlan_connected()) {
|
||
char ss[64]; net_wifi_ssid(ss, sizeof ss);
|
||
if (ss[0]) snprintf(g_net_ssid, sizeof g_net_ssid, "已连接: %s", ss);
|
||
else snprintf(g_net_ssid, sizeof g_net_ssid, "已连接");
|
||
} else {
|
||
snprintf(g_net_ssid, sizeof g_net_ssid, "未连接");
|
||
}
|
||
net_wifi_scan_trigger(); /* 异步发起扫描，稍后附近/计数更接近真实 */
|
||
net_bt_scan_trigger(); /* M2.40：异步发起蓝牙附近扫描（写 /tmp 缓存，不阻塞） */
|
||
bt_role_refresh(1); /* M2.48：进入设置/网络动作时立即重探蓝牙角色，本行/状态栏最新 */
|
||
meow_net_t tmp[S_NET_MAX];
|
||
g_net_saved_n = net_wifi_saved(tmp, S_NET_MAX);
|
||
g_net_scan_n = net_wifi_scan(tmp, S_NET_MAX);
|
||
g_net_bt_n = net_bt_scan(tmp, S_NET_MAX); /* 附近（已配对+扫描发现） */
|
||
}
|
||
|
||
/* SC_INFO/SC_LIST 行的即时展示文本（读缓存；draw 路径不 popen） */
|
||
static int s_net_get(const srow_t *r, char *buf, int len)
|
||
{
|
||
switch (r->net_list) {
|
||
case NET_LIST_WIFI_SSID: snprintf(buf, len, "%s", g_net_ssid); return 0;
|
||
case NET_LIST_WIFI_SAVED: snprintf(buf, len, "%d 个网络", g_net_saved_n); return 0;
|
||
case NET_LIST_WIFI_SCAN: snprintf(buf, len, "%d 个附近WiFi", g_net_scan_n); return 0;
|
||
case NET_LIST_BT_NEARBY: snprintf(buf, len, "%d 台设备", g_net_bt_n); return 0;
|
||
case NET_LIST_BT_MODE: snprintf(buf, len, "%s", g_bt_mode); return 0;
|
||
case NET_LIST_ABOUT: snprintf(buf, len, "MeowOS v%s", g_meowos_version); return 0;
|
||
}
|
||
snprintf(buf, len, "-");
|
||
return 0;
|
||
}
|
||
|
||
/* 网络动作开关：wifi/bluetooth 开/关（写 wlan0/hci0；立即生效，异步刷新缓存）。
|
||
* 走 system（wifi_up.sh 自身后台化子进程、ip link/hciconfig 均为快 ioctl）。 */
|
||
static void s_net_toggle_wifi(int on)
|
||
{
|
||
if (on) system("PATH=/bin:/sbin:/usr/bin:/usr/sbin /usr/bin/wifi_up.sh");
|
||
else system("PATH=/bin:/sbin:/usr/bin:/usr/sbin ip link set wlan0 down 2>/dev/null");
|
||
}
|
||
static void s_net_toggle_bt(int on)
|
||
{
|
||
if (on) system("hciconfig hci0 up 2>/dev/null");
|
||
else system("hciconfig hci0 down 2>/dev/null");
|
||
}
|
||
|
||
/* 进入设置页时把 network.wifi_enabled/bluetooth_enabled 同步为真实硬件态，
|
||
* 让开关行反映 reality（仅同步内存 + 刷新缓存；不落盘 —— s_commit 的 save 才真正写）。
|
||
* settings 未 init/取值失败则不动（保默认）。 */
|
||
static void s_net_sync_from_sys(void)
|
||
{
|
||
int cur = 0;
|
||
if (meow_settings_get_bool("network.wifi_enabled", &cur) == 0) {
|
||
int real = wlan_connected() ? 1 : 0;
|
||
if (real != cur) meow_settings_set_bool("network.wifi_enabled", real);
|
||
}
|
||
if (meow_settings_get_bool("network.bluetooth_enabled", &cur) == 0) {
|
||
int real = hci_powered() ? 1 : 0;
|
||
if (real != cur) meow_settings_set_bool("network.bluetooth_enabled", real);
|
||
}
|
||
s_net_refresh();
|
||
}
|
||
|
||
/* M2.5x 系统设置「关于本机」：复用 s_dd_modal 弹只读设备信息（定义见下，供 s_net_open 分发）。
|
||
* 前置声明：s_net_open 在其定义之前调用它。 */
|
||
static void s_about_open(void);
|
||
|
||
/* 打开 SC_LIST 网络下拉（重新解析最新列表）：已保存=可 select_network 连接；
|
||
* 附近WiFi（扫描）/蓝牙设备（附近扫描+已配对）=只读展示（选择即关闭；带密码/配对仍留后期）。
|
||
* 返回后刷新缓存。 */
|
||
static void s_net_open(const srow_t *r)
|
||
{
|
||
meow_net_t items[S_NET_MAX];
|
||
const char *txt[S_NET_MAX];
|
||
char back[S_NET_MAX][48];
|
||
int n = 0;
|
||
switch (r->net_list) {
|
||
case NET_LIST_WIFI_SSID: /* 点开「WiFi连接」→ 显示当前连接详情（只读） */
|
||
n = net_wifi_info(back, S_NET_MAX);
|
||
if (n == 0) { snprintf(back[0], sizeof back[0], "%s", wlan_connected() ? "已连接（无详情）" : "未连接"); n = 1; }
|
||
for (int i = 0; i < n; i++) txt[i] = back[i];
|
||
s_dd_modal(r->label, txt, n, -1); /* 只读展示 */
|
||
break;
|
||
case NET_LIST_WIFI_SAVED:
|
||
n = net_wifi_saved(items, S_NET_MAX);
|
||
if (n == 0) { snprintf(back[0], sizeof back[0], "无已保存网络"); txt[0] = back[0]; n = 1; items[0].id = -1; }
|
||
else for (int i = 0; i < n; i++) {
|
||
snprintf(back[i], sizeof back[i], "%s", items[i].name[0] ? items[i].name : "<未命名>");
|
||
txt[i] = back[i];
|
||
}
|
||
{
|
||
int pick = s_dd_modal(r->label, txt, n, -1); /* cur=-1：不预勾选 */
|
||
if (pick >= 0 && pick < n && items[pick].id >= 0) {
|
||
char cmd[160];
|
||
snprintf(cmd, sizeof cmd, "PATH=/bin:/sbin:/usr/bin:/usr/sbin wpa_cli -i wlan0 select_network %d 2>/dev/null",
|
||
items[pick].id);
|
||
system(cmd);
|
||
}
|
||
}
|
||
break;
|
||
case NET_LIST_WIFI_SCAN:
|
||
net_wifi_scan_trigger();
|
||
n = net_wifi_scan(items, S_NET_MAX);
|
||
if (n == 0) { snprintf(back[0], sizeof back[0], "未扫描到附近网络"); txt[0] = back[0]; n = 1; }
|
||
else for (int i = 0; i < n; i++) { snprintf(back[i], sizeof back[i], "%s", items[i].name); txt[i] = back[i]; }
|
||
s_dd_modal(r->label, txt, n, -1); /* 只读展示 */
|
||
break;
|
||
case NET_LIST_BT_NEARBY:
|
||
net_bt_scan_trigger(); /* M2.40：异步发起/刷新附近扫描（读缓存；绝不阻塞主循环） */
|
||
n = net_bt_scan(items, S_NET_MAX);
|
||
if (n == 0) {
|
||
long t = (long)now_ms();
|
||
if (g_bt_scan_ms && t - g_bt_scan_ms < 6000)
|
||
snprintf(back[0], sizeof back[0], "扫描中...");
|
||
else
|
||
snprintf(back[0], sizeof back[0], "未发现附近设备");
|
||
txt[0] = back[0]; n = 1; items[0].id = -1;
|
||
}
|
||
else for (int i = 0; i < n; i++) { snprintf(back[i], sizeof back[i], "%s", items[i].name); txt[i] = back[i]; }
|
||
s_dd_modal(r->label, txt, n, -1); /* 只读展示 */
|
||
break;
|
||
case NET_LIST_ABOUT:
|
||
s_about_open(); /* M2.5x 系统设置「关于本机」：只读设备信息弹窗 */
|
||
return; /* 不上网/蓝牙缓存刷新（信息已现场读取） */
|
||
default:
|
||
return;
|
||
}
|
||
s_net_refresh();
|
||
}
|
||
|
||
/* M2.5x 系统设置「关于本机」：复用 s_dd_modal（与「WiFi连接状态」弹窗同款）列只读设备信息，
|
||
* 点卡片外/返回即关。信息源：settings system.hostname / g_meowos_version(=/etc/meowos_version) /
|
||
* uname -r / /proc/cpuinfo / /proc/meminfo / df / wpa_cli status / hciconfig / fb 分辨率+状态栏高。
|
||
* 只展示安全信息（不含任何密钥/凭证）；实时读，短超时不阻塞主循环；行数 ≤12 适配下拉视口。
|
||
* 说明：launcher/bootmenu/watchdog/meow_v 未单独暴露版本号，统一以 /etc/meowos_version 的
|
||
* MeowOS 版本表示（与固件打包同源）；无独立固件版本文件。 */
|
||
static void s_about_open(void)
|
||
{
|
||
char info[12][96];
|
||
const char *item[12];
|
||
int n = 0;
|
||
char host[64];
|
||
char *o;
|
||
|
||
/* 设备名（settings system.hostname；缺省 meowos） */
|
||
if (meow_settings_get_str("system.hostname", host, sizeof host) != 0 || !host[0])
|
||
snprintf(host, sizeof host, "meowos");
|
||
snprintf(info[n++], sizeof info[0], "设备名: %s", host);
|
||
|
||
/* MeowOS / 固件版本（/etc/meowos_version；与固件打包同源） */
|
||
snprintf(info[n++], sizeof info[0], "MeowOS: v%s", g_meowos_version);
|
||
|
||
/* 内核版本 */
|
||
o = popen_read_tmo(400, "PATH=/bin:/sbin:/usr/bin:/usr/sbin uname -r 2>/dev/null");
|
||
if (o) { for (char *p = o; *p; p++) if (*p == '\n' || *p == '\r') { *p = 0; break; }
|
||
snprintf(info[n++], sizeof info[0], "内核: %s", o[0] ? o : "-"); free(o); }
|
||
else snprintf(info[n++], sizeof info[0], "内核: -");
|
||
|
||
/* CPU（/proc/cpuinfo：Processor/CPU model/Hardware/system type 任取首非空行） */
|
||
o = popen_read_tmo(500,
|
||
"PATH=/bin:/sbin:/usr/bin:/usr/sbin awk -F: '/(model name|cpu model|system type|machine|hardware)/{print $2; exit}' /proc/cpuinfo 2>/dev/null");
|
||
if (o) { char *q = o; for (char *p = o; *p; p++) if (*p == '\n' || *p == '\r') { *p = 0; break; }
|
||
while (*q == ' ' || *q == '\t') q++;
|
||
snprintf(info[n++], sizeof info[0], "CPU: %s", q[0] ? q : "-"); free(o); }
|
||
else snprintf(info[n++], sizeof info[0], "CPU: -");
|
||
|
||
/* 内存（/proc/meminfo MemTotal / MemAvailable，KB→MB） */
|
||
long mtot = 0, mavail = 0;
|
||
o = popen_read_tmo(500, "PATH=/bin:/sbin:/usr/bin:/usr/sbin awk '/^MemTotal:/{print $2}/^MemAvailable:/{print $2}' /proc/meminfo 2>/dev/null");
|
||
if (o) { if (sscanf(o, "%ld%ld", &mtot, &mavail) < 2) mavail = 0; free(o); }
|
||
if (mtot > 0) snprintf(info[n++], sizeof info[0], "内存: %ld/%ld MB", mavail / 1024, mtot / 1024);
|
||
else snprintf(info[n++], sizeof info[0], "内存: -");
|
||
|
||
/* 板载 /usr/data：df -k → 可用/总量（MB） */
|
||
long dfree = 0, dtot = 0;
|
||
o = popen_read_tmo(600, "PATH=/bin:/sbin:/usr/bin:/usr/sbin df -k /usr/data 2>/dev/null | awk 'NR==2{print $4, $2}'");
|
||
if (o) { if (sscanf(o, "%ld%ld", &dfree, &dtot) < 2) dtot = 0; free(o); }
|
||
if (dtot > 0) snprintf(info[n++], sizeof info[0], "板载: %ld/%ld MB", dfree / 1024, dtot / 1024);
|
||
else snprintf(info[n++], sizeof info[0], "板载: -");
|
||
|
||
/* TF 卡 /usr/data/mnt/sd_0：卡在（/proc/mounts 含该挂载点）则 df，否则「无卡」 */
|
||
if (card_present()) {
|
||
long sfree = 0, stot = 0;
|
||
o = popen_read_tmo(600, "PATH=/bin:/sbin:/usr/bin:/usr/sbin df -k /usr/data/mnt/sd_0 2>/dev/null | awk 'NR==2{print $4, $2}'");
|
||
if (o) { if (sscanf(o, "%ld%ld", &sfree, &stot) < 2) stot = 0; free(o); }
|
||
if (stot > 0) snprintf(info[n++], sizeof info[0], "TF卡: %ld/%ld MB", sfree / 1024, stot / 1024);
|
||
else snprintf(info[n++], sizeof info[0], "TF卡: -");
|
||
} else {
|
||
snprintf(info[n++], sizeof info[0], "TF卡: 无卡");
|
||
}
|
||
|
||
/* 当前屏幕分辨率 + 状态栏高 */
|
||
snprintf(info[n++], sizeof info[0], "屏幕: %dx%d 状态栏%dpx", fb_xres, fb_yres, (int)SB_BAR_H);
|
||
|
||
/* WiFi：连上则 SSID（decode）+ 本机IP + 本机MAC；未连接显示「未连接」 */
|
||
if (wlan_connected()) {
|
||
char ss[64]; net_wifi_ssid(ss, sizeof ss);
|
||
snprintf(info[n++], sizeof info[0], "WiFi: %s", ss[0] ? ss : "已连接");
|
||
o = popen_read_tmo(1200, "PATH=/bin:/sbin:/usr/bin:/usr/sbin wpa_cli -i wlan0 status 2>/dev/null");
|
||
char ip[32] = "", mac[24] = "";
|
||
if (o) {
|
||
char *p = o;
|
||
while (p && *p) {
|
||
char *e = strchr(p, '\n'); if (e) *e = 0;
|
||
if (!strncmp(p, "ip_address=", 11)) snprintf(ip, sizeof ip, "%s", p + 11);
|
||
else if (!strncmp(p, "address=", 8)) snprintf(mac, sizeof mac, "%s", p + 8);
|
||
p = e ? e + 1 : NULL;
|
||
}
|
||
free(o);
|
||
}
|
||
if (ip[0]) snprintf(info[n++], sizeof info[0], "本机IP: %s", ip);
|
||
if (mac[0]) snprintf(info[n++], sizeof info[0], "本机MAC: %s", mac);
|
||
} else {
|
||
snprintf(info[n++], sizeof info[0], "WiFi: 未连接");
|
||
}
|
||
|
||
/* 蓝牙：hci_powered 决定开/关 */
|
||
snprintf(info[n++], sizeof info[0], "蓝牙: %s", hci_powered() ? "开" : "关");
|
||
|
||
for (int i = 0; i < n && i < 12; i++) item[i] = info[i];
|
||
s_dd_modal("关于本机", item, n, -1); /* cur=-1：只读展示，无预勾选 */
|
||
}
|
||
|
||
|
||
/* ---- 控件绘制（MD3 形态；全部用主题角色色，无散落硬编码）---- */
|
||
static void s_draw_switch(int x, int y, int on, const meow_ui_theme_t *th)
|
||
{
|
||
int w = 48, h = 28;
|
||
meow_gfx_fill_round(x, y, w, h, h / 2, on ? th->primary : th->surface_container);
|
||
int knob_r = h / 2 - 3;
|
||
int kx = on ? x + w - knob_r * 2 - 3 : x + 3;
|
||
meow_gfx_fill_round(kx, y + 3, knob_r * 2, knob_r * 2, knob_r,
|
||
on ? 0xFFFFFF : th->on_surface_variant);
|
||
}
|
||
static void s_draw_slider(int x, int y, int w, int val, int mn, int mx,
|
||
const meow_ui_theme_t *th)
|
||
{
|
||
int h = 6, ty = y;
|
||
fill_rect(x, ty, w, h, th->surface_container); /* 未达段 */
|
||
int range = mx - mn;
|
||
int frac = range ? (val - mn) * w / range : 0;
|
||
if (frac > 0) fill_rect(x, ty, frac, h, th->primary); /* 已达段 */
|
||
int tx = x + frac, cy = ty + h / 2;
|
||
meow_gfx_fill_round(tx - 12, cy - 12, 24, 24, 12, th->primary); /* thumb */
|
||
meow_gfx_fill_round(tx - 5, cy - 5, 10, 10, 5, 0xFFFFFF); /* thumb 中点 */
|
||
}
|
||
|
||
/* ---- set 后统一侧效应（DAC/背光/刷新率）+ 可选落盘 ---- */
|
||
static void s_commit(const srow_t *r, int save_now)
|
||
{
|
||
if (!r || !r->key) return;
|
||
if (!strcmp(r->key, "audio.volume")) {
|
||
/* M2.38 Bug1/2：音量变更——拖动中节流写 DAC（防 system() 高频卡死），抬手才无条件直写；
|
||
* 同时把 g_sys.vol 同步为当前值并刷整条状态栏（顶层 VOL 数字随之更新，不整屏重绘）。 */
|
||
g_sys.vol = settings_volume_get();
|
||
paint_sb_right();
|
||
if (save_now) meow_dac_vol_flush(); /* 抬手/点击落盘=无条件直写真实 DAC */
|
||
else meow_dac_vol_write_throttled();/* 拖动中=墙钟节流写 DAC */
|
||
}
|
||
else if (!strcmp(r->key, "display.brightness")) {
|
||
/* M2.46-2 ①：亮度滑条拖动时状态栏百分比数字实时跟。根因：旧代码只 write_brightness(v)
|
||
* 写背光，未同步 g_sys.brightness（状态栏亮度数字取它）也未重绘 → 数字卡住。
|
||
* 修法：写背光后同步 g_sys.brightness 并 paint_sb_right()(≡sb_redraw 整条标脏)。
|
||
* 一致性：其后 meow_sys_refresh 从 sysfs 读回的也是刚写入的 v，二者一致不打架。 */
|
||
int v; if (meow_settings_get_int("display.brightness", &v) == 0) {
|
||
write_brightness(v);
|
||
g_sys.brightness = v;
|
||
paint_sb_right();
|
||
}
|
||
}
|
||
else if (!strcmp(r->key, "display.refresh_rate"))
|
||
meow_ui_set_refresh_rate(refresh_rate_cfg);
|
||
else if (!strcmp(r->key, "display.refresh_always_max"))
|
||
meow_ui_set_refresh_always_max(refresh_always_max);
|
||
else if (!strcmp(r->key, "network.wifi_enabled")) {
|
||
int on = 0; meow_settings_get_bool(r->key, &on);
|
||
s_net_toggle_wifi(on);
|
||
s_net_refresh();
|
||
}
|
||
else if (!strcmp(r->key, "network.bluetooth_enabled")) {
|
||
int on = 0; meow_settings_get_bool(r->key, &on);
|
||
s_net_toggle_bt(on);
|
||
s_net_refresh();
|
||
}
|
||
/* M2.44 背景选项真正生效：display.background(black/blue/green) → menu_bg(主界面背景)。
|
||
* 此前 SC_PRESET 只写 meow_settings，未应用 menu_bg → 黑/绿点了没用。 */
|
||
else if (!strcmp(r->key, "display.background")) {
|
||
char bg[16]; meow_settings_get_str(r->key, bg, sizeof bg);
|
||
if (!strcmp(bg, "blue")) menu_bg = 0x0A1428; /* 深蓝 */
|
||
else if (!strcmp(bg, "green")) menu_bg = 0x0A2814; /* 深绿 */
|
||
else menu_bg = 0x000000; /* black(默认) */
|
||
/* 状态栏(menu_bg)与主界面背景都会用到 menu_bg；退出设置页回主界面时重绘即可。 */
|
||
}
|
||
/* M2.44 主题/mode 变更：状态栏文字/底色已接 s_ui_theme()，此处仅确保回主界面重绘。 */
|
||
else if (!strcmp(r->key, "display.theme") || !strcmp(r->key, "display.theme_mode") ||
|
||
!strcmp(r->key, "display.theme_dark_start") || !strcmp(r->key, "display.theme_dark_end")) {
|
||
paint_sb_right(); /* 状态栏文字/底色随主题刷新（整条标脏） */
|
||
}
|
||
/* M2.5x：字体文件(font.file)变更 → 立即 unload + reload（若已加载）。
|
||
* 置 mfont_forced 跳过 meow_font_ensure 的 SDK 复用捷径，强制走
|
||
* font.file → 卡默认 → 固件 链；全失败则回退 5x7 点阵（系统不死）。 */
|
||
else if (!strcmp(r->key, "font.file")) {
|
||
mfont_ready = 0;
|
||
mfont_forced = 1;
|
||
if (!meow_font_ensure())
|
||
logmsg("font.file: reload failed -> dotmatrix fallback");
|
||
else
|
||
logmsg("font.file: reloaded");
|
||
meow_font_reload_multifont(); /* M2.5x：全局字体变更 → 重配多字体（各类跟随全局者随之更新） */
|
||
meow_dirty_full(); /* 字体变化可能影响所有文本渲染，整帧重绘 */
|
||
}
|
||
/* M2.5x「加载大字库」开关（font.load_full）变更 → 强制重载 launcher 自身字体（小/大字库切换），
|
||
* 并重配多字体；大字库 atlas 大，meow_font_ensure 先 unload 旧再 load 新（防双驻留）。 */
|
||
else if (!strcmp(r->key, "font.load_full")) {
|
||
mfont_ready = 0;
|
||
mfont_forced = 1; /* 跳过 SDK 复用捷径，强制按生效档（gbk/common）真实 reload */
|
||
if (!meow_font_ensure())
|
||
logmsg("font.load_full: reload failed -> dotmatrix fallback");
|
||
else {
|
||
int lf = 0; meow_settings_get_switch("font.load_full", &lf);
|
||
logmsg("font.load_full: reloaded (load_full=%d)", lf);
|
||
}
|
||
meow_font_reload_multifont();
|
||
meow_dirty_full();
|
||
}
|
||
/* M2.5x 多字体：开关或任一类别字体变更 → 重新去重装载类别字库并重绘（多字体可能影响文本渲染）。 */
|
||
else if (!strcmp(r->key, "display.multi_font") || !strncmp(r->key, "font.class_", 11)) {
|
||
meow_font_reload_multifont();
|
||
meow_dirty_full();
|
||
}
|
||
if (save_now) meow_settings_save();
|
||
}
|
||
static void s_set_int_value(const srow_t *r, int v, int save_now)
|
||
{
|
||
if (!strcmp(r->key, "audio.volume")) v = vol_clamp(v); /* 尊重 audio.volume_max */
|
||
meow_settings_set_int(r->key, v);
|
||
s_commit(r, save_now);
|
||
}
|
||
/* 滑条拖动/点击落值：对「档位型」息屏时间做 索引→秒 换算，其余行原样写盘。
|
||
* sl_v 为滑条轨迹值（s_slider_val_from_x 返回值；息屏时间=档位索引）。 */
|
||
static void s_slider_set_from_track(const srow_t *r, int sl_v, int save_now)
|
||
{
|
||
if (!strcmp(r->key, "display.screen_off_timeout")) sl_v = s_time_tier_val(sl_v);
|
||
/* B2b 深色时段滑条：分钟按 15 分钟步进吸附（0-1439，整 15 分钟），避免拖出任意分钟 */
|
||
if (!strcmp(r->key, "display.theme_dark_start") || !strcmp(r->key, "display.theme_dark_end")) {
|
||
sl_v = ((sl_v + 7) / 15) * 15;
|
||
if (sl_v < 0) sl_v = 0;
|
||
if (sl_v > 1439) sl_v = 1439;
|
||
}
|
||
s_set_int_value(r, sl_v, save_now);
|
||
}
|
||
|
||
/* 滑条拖动值域映射：x（屏幕坐标）→ value，基于布局常量 S_SLIDER_X/W。
|
||
* 所有滑条行共用同一 track 几何，故任意滑条行都能正确映射。 */
|
||
static int s_slider_val_from_x(const srow_t *r, int px)
|
||
{
|
||
int range = r->max - r->min;
|
||
int v = r->min + (range ? (px - S_SLIDER_X) * range / S_SLIDER_W : 0);
|
||
if (v < r->min) v = r->min;
|
||
if (v > r->max) v = r->max;
|
||
return v;
|
||
}
|
||
|
||
/* ---- 绘制设置页（整页画进 SDK back_buf；调用方再 meow_dirty_add 局部 + flush）---- */
|
||
static void draw_settings_page(int sel, int scroll_off)
|
||
{
|
||
const meow_ui_theme_t *th = s_ui_theme();
|
||
int W = fb_xres, H = fb_yres;
|
||
fill_rect(0, 0, W, H, th->surface);
|
||
draw_statusbar(); /* 复用状态栏骨架 */
|
||
if (mfont_ready) ui_draw(24, 50, "系统设置", th->on_surface, 28);
|
||
else draw_text(24, 30, "SETTINGS", 3, th->on_surface);
|
||
fill_rect(0, 50 + (mfont_ready ? meow_font_line_height(28) : 24) + 2, W, 2, th->outline);
|
||
|
||
/* M2.38 Bug5：整屏背景替代带圆角的单张卡片（用户反馈圆角非全屏底很怪）。
|
||
* 内容区从 SET_CARD_Y 起整屏 fill surface_variant、去圆角、满宽直到屏幕底；
|
||
* 状态栏(0-28)与标题区(28-92)仍为 surface，标题/分隔线/分组 outline/选中高亮/滚动条布局不变。 */
|
||
fill_rect(0, SET_CARD_Y, W, H - SET_CARD_Y, th->surface_variant);
|
||
|
||
int clip_top = SET_CONTENT_Y, clip_bot = SET_CONTENT_BOT;
|
||
s_sel_track_y = -1;
|
||
for (int i = 0; i < SMENU_N; i++) {
|
||
int pos = s_vis_of(i);
|
||
if (pos < 0) continue; /* 隐藏行（多字体关闭时 6 个 class 行） */
|
||
int sy = SET_CONTENT_Y + pos * SROW_H - scroll_off;
|
||
if (sy + SROW_H < clip_top || sy >= clip_bot) continue; /* 视野外行跳过（配滚动） */
|
||
const srow_t *r = &SMENU[i];
|
||
int selected = (i == sel);
|
||
if (selected)
|
||
meow_ui_fill_rect_alpha(SET_CARD_X + 4, sy, SET_CARD_W - 8, SROW_H, th->primary, 34);
|
||
meow_ui_fill_rect(SET_CARD_X + 12, sy + SROW_H - 1, SET_CONTENT_W, 1, th->outline);
|
||
|
||
if (r->ctrl == SC_HEADER) {
|
||
ui_draw(SET_CARD_X + 16, sy + 14, r->label, th->on_surface_variant, 18);
|
||
} else if (r->ctrl == SC_SWITCH) {
|
||
ui_draw(SET_CARD_X + 16, sy + (SROW_H - meow_font_line_height(22)) / 2, r->label,
|
||
th->on_surface, 22);
|
||
int on = 0; meow_settings_get_switch(r->key, &on);
|
||
s_draw_switch(SET_CARD_X + SET_CARD_W - 16 - 48, sy + (SROW_H - 28) / 2, on, th);
|
||
} else if (r->ctrl == SC_SLIDER) {
|
||
int ly = sy + (SROW_H - meow_font_line_height(22)) / 2 - 6; /* 标题略上移，给下方滑条留位 */
|
||
ui_draw(SET_CARD_X + 16, ly, r->label, th->on_surface, 22);
|
||
char vb[32]; s_fmt_value(r, vb, sizeof vb);
|
||
ui_draw(SET_CARD_X + SET_CARD_W - 16 - ui_width(vb, 22), ly, vb, th->on_surface_variant, 22);
|
||
int v = 0; meow_settings_get_int(r->key, &v);
|
||
/* 息屏时间为档位索引型：把秒换算成档位索引再画（各档等距，便于触摸对位）；
|
||
* 其余滑条防御性 clamp 到 [min,max]，防止后端暂存值越界（如 brightness 旧值 101
|
||
* 在画时被 clamp 到 100，thumb 不冲出 track）。 */
|
||
if (!strcmp(r->key, "display.screen_off_timeout")) v = s_time_tier_idx(v);
|
||
else {
|
||
if (v < r->min) v = r->min;
|
||
if (v > r->max) v = r->max;
|
||
}
|
||
int tyy = sy + 40;
|
||
s_draw_slider(S_SLIDER_X, tyy, S_SLIDER_W, v, r->min, r->max, th);
|
||
if (selected) s_sel_track_y = tyy;
|
||
} else if (r->ctrl == SC_INFO) { /* M2.39 只读动态信息（如 WiFi 连接 SSID） */
|
||
int ly = sy + (SROW_H - meow_font_line_height(22)) / 2;
|
||
ui_draw(SET_CARD_X + 16, ly, r->label, th->on_surface, 22);
|
||
char vb[48]; s_net_get(r, vb, sizeof vb);
|
||
int vx = SET_CARD_X + SET_CARD_W - 16 - ui_width(vb, 22);
|
||
ui_draw(vx, ly, vb, th->on_surface_variant, 22);
|
||
} else if (r->ctrl == SC_LIST) { /* M2.39 网络列表行：摘要 + 右向展开提示 */
|
||
int ly = sy + (SROW_H - meow_font_line_height(22)) / 2;
|
||
ui_draw(SET_CARD_X + 16, ly, r->label, th->on_surface, 22);
|
||
char vb[48]; s_net_get(r, vb, sizeof vb);
|
||
int vx = SET_CARD_X + SET_CARD_W - 16 - 12 - ui_width(vb, 22); /* 给右向 chevron 留位 */
|
||
ui_draw(vx, ly, vb, th->on_surface_variant, 22);
|
||
s_draw_chevron(SET_CARD_X + SET_CARD_W - 16, sy + SROW_H / 2, th->on_surface_variant);
|
||
} else { /* SC_ENUM / SC_PRESET */
|
||
int ly = sy + (SROW_H - meow_font_line_height(22)) / 2;
|
||
ui_draw(SET_CARD_X + 16, ly, r->label, th->on_surface, 22);
|
||
char vb[40]; s_display_value(r, vb, sizeof vb);
|
||
int vx = SET_CARD_X + SET_CARD_W - 16 - ui_width(vb, 22);
|
||
ui_draw(vx, ly, vb, th->on_surface_variant, 22);
|
||
s_draw_chevron(vx - 8, sy + SROW_H / 2, th->on_surface_variant);
|
||
}
|
||
}
|
||
|
||
/* 滚动条（内容超出视口时显示 thumb；on_surface_variant 弱化） */
|
||
int vis_total = s_vis_count() * SROW_H;
|
||
if (vis_total > SET_CONTENT_H) {
|
||
int total = vis_total;
|
||
int thumb_h = SET_CONTENT_H * SET_CONTENT_H / total;
|
||
if (thumb_h < 24) thumb_h = 24;
|
||
int th_y = SET_CONTENT_Y + (SET_CONTENT_H - thumb_h) * scroll_off / (total - SET_CONTENT_H);
|
||
meow_gfx_fill_round(fb_xres - 12, SET_CONTENT_Y, 5, SET_CONTENT_H, 3, th->surface_container);
|
||
meow_gfx_fill_round(fb_xres - 12, th_y, 5, thumb_h, 3, th->on_surface_variant);
|
||
}
|
||
|
||
/* 底部：返回提示（左）+ 版本号（右），复用应用列表底部对齐逻辑。
|
||
* M2.39：返回按钮改用像素左向箭头 + 「返回」——点阵回退字库缺少 '‹' 字形，
|
||
* 原 「‹ 返回」在 !mfont_ready 时 '‹' 渲染成方框。 */
|
||
{
|
||
char ver[32];
|
||
snprintf(ver, sizeof ver, "MeowOS v%s dev", g_meowos_version);
|
||
int foot_y = fb_yres - meow_font_line_height(20) - 8;
|
||
s_draw_chevron_left(SET_CARD_X + 12, foot_y + meow_font_line_height(20) / 2, th->on_surface_variant);
|
||
ui_draw(SET_CARD_X + 24, foot_y, "返回", th->on_surface_variant, 20);
|
||
ui_draw(fb_xres - 8 - ui_width(ver, 20), foot_y, ver, th->outline, 20);
|
||
}
|
||
}
|
||
|
||
/* M2.5x 多字体：class 行下拉的「跟随全局」选项（值=空串）在 write 路径经此映射回真实存储值。 */
|
||
static const char *s_preset_value(const srow_t *r, int pick)
|
||
{
|
||
int is_cls = r->key && !strncmp(r->key, "font.class_", 11);
|
||
if (is_cls) {
|
||
if (pick == 0) return ""; /* 跟随全局 font.file */
|
||
pick--;
|
||
}
|
||
int pn = 0;
|
||
const char *const *pps = s_row_presets(r, &pn);
|
||
if (pick < 0 || pick >= pn) return is_cls ? "" : (pps && pn > 0 ? pps[0] : "");
|
||
return pps[pick];
|
||
}
|
||
|
||
/* ---- 选择器子对话框（MD3 §3.3：居中圆角卡片，列选项；中文标签）----
|
||
* ENUM 用 meow_settings_enum_names/enum_label；PRESET 用本地预设表。
|
||
* 返回选中索引；取消返回 -1。阻塞（自开输入设备）。
|
||
* M2.39：modal 核心抽到 s_dd_modal（网络列表复用），本函数只负责组装选项数组。 */
|
||
static int s_dropdown(const srow_t *r)
|
||
{
|
||
int n = 0, cur = 0;
|
||
const char *names[8];
|
||
char labels[8][48];
|
||
const char *item[S_NET_MAX];
|
||
if (r->ctrl == SC_ENUM) {
|
||
int kn = 0;
|
||
meow_settings_enum_names(r->key, names, &kn);
|
||
n = kn;
|
||
if (n > S_NET_MAX) n = S_NET_MAX;
|
||
for (int i = 0; i < n; i++) {
|
||
meow_settings_enum_label(r->key, i, labels[i], sizeof labels[i]);
|
||
item[i] = labels[i];
|
||
}
|
||
int ci = 0; meow_settings_get_enum(r->key, &ci); cur = ci;
|
||
} else {
|
||
char cstr[MEOW_SET_MAX_LEN];
|
||
meow_settings_get_str(r->key, cstr, sizeof cstr);
|
||
int pn = 0;
|
||
const char *const *pps = s_row_presets(r, &pn);
|
||
int is_cls = r->key && !strncmp(r->key, "font.class_", 11);
|
||
int base = is_cls ? 1 : 0; /* class 行 0 号留给「跟随全局」 */
|
||
int cnt = pn; if (cnt > S_NET_MAX - base) cnt = S_NET_MAX - base;
|
||
n = base + cnt;
|
||
if (is_cls) {
|
||
names[0] = "";
|
||
snprintf(labels[0], sizeof labels[0], "跟随全局字体");
|
||
item[0] = labels[0];
|
||
if (!cstr[0]) cur = 0;
|
||
}
|
||
for (int i = 0; i < cnt; i++) {
|
||
names[base + i] = pps[i];
|
||
snprintf(labels[base + i], sizeof labels[base + i], "%s",
|
||
(r->preset_labels && r->preset_labels[i][0]) ? r->preset_labels[i] : pps[i]);
|
||
item[base + i] = labels[base + i];
|
||
if (!strcmp(pps[i], cstr)) cur = base + i;
|
||
}
|
||
}
|
||
if (n <= 0) return -1;
|
||
if (cur < 0 || cur >= n) cur = 0;
|
||
return s_dd_modal(r->label, item, n, cur);
|
||
}
|
||
|
||
/* ---- 通用选择器下拉模态（MD3 §3.3：居中圆角卡片，列选项）----
|
||
* title=标题；item[i]=第 i 项显示文本；n=项数（≤S_NET_MAX）；cur=当前值下标（画勾选）。
|
||
* 返回选中下标；取消/点卡片外返回 -1。阻塞（自开输入设备）。
|
||
* s_dropdown（设置项 enum/preset）与 s_net_open（网络列表）共用。
|
||
* M2.40：触摸命中判定改在抬手用抬手时刻最新 abs 坐标（见循环内注释），修「点选项无反应」。
|
||
* 说明：模态内部仍保留音量键=移动选项高亮（这是「选值」不是「设置页列表光标」，属另一语义，
|
||
* 与 M2.39 仅移除 run_settings_page 列表光标移动的约束不冲突）。 */
|
||
static int s_dd_modal(const char *title, const char *item[S_NET_MAX], int n, int cur)
|
||
{
|
||
int sel = cur;
|
||
const meow_ui_theme_t *th = s_ui_theme();
|
||
int W = fb_xres, H = fb_yres;
|
||
int opt_row = 48, pad = 20, title_h = 40;
|
||
int d_h = title_h + n * opt_row + pad;
|
||
int d_w = 348, d_x = (W - d_w) / 2, d_y = (H - d_h) / 2;
|
||
if (d_y < SB_BAR_H) d_y = SB_BAR_H; /* 下拉不压状态栏（栏高 40→28，随常量） */
|
||
if (H - d_y - d_h < 20) d_y = H - d_h - 20;
|
||
|
||
struct keypoll kp_power, kp_keys;
|
||
kp_open(&kp_power, DEV_POWER); kp_open(&kp_keys, DEV_KEYS);
|
||
struct kd_state kd_vold, kd_volu, kd_pwr;
|
||
memset(&kd_vold, 0, sizeof kd_vold); memset(&kd_volu, 0, sizeof kd_volu); memset(&kd_pwr, 0, sizeof kd_pwr);
|
||
int m_prev_vold = 0, m_prev_volu = 0, m_prev_pwr = 0;
|
||
for (int w = 0; w < KEYBUF_WORDS; w++) {
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEDOWN % 32))) m_prev_vold = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEUP % 32))) m_prev_volu = 1;
|
||
if (kp_power.cur[w] & (1UL << (KEY_POWER % 32))) m_prev_pwr = 1;
|
||
}
|
||
int tfd = open(DEV_TOUCH, O_RDONLY | O_NONBLOCK);
|
||
if (tfd >= 0) {
|
||
/* M2.37：彻底清空「打开下拉」这次触摸的残留边沿。goodix 的抬起序列（ABS 坐标/
|
||
* BTN_TOUCH=0/MT_TRACKING=-1）在开 fd 后仍可能陆续送达，若只清空一次，第一轮
|
||
* 下拉循环会读到这些残边 → 误判抬起/选项错位/点卡片外穿透。故 排空→短延时→再排空。 */
|
||
unsigned char ev[16];
|
||
while (read(tfd, ev, sizeof ev) == 16) {}
|
||
usleep(40000); /* M2.38 Bug3：排空→40ms→再排空，吸收 goodix 抬起序列长尾 */
|
||
while (read(tfd, ev, sizeof ev) == 16) {}
|
||
}
|
||
int pwr_pending = 0;
|
||
int result = -1;
|
||
int dlx = -1, dly = -1, dtd = 0; /* 下拉触摸解析（dlx/dly=最新有效坐标；dtd=已按下） */
|
||
/* M2.40：不再锁按下时刻的 ddx/ddy —— goodix 时序 BTN_TOUCH 先于 ABS，按下边沿时坐标可能
|
||
* 还是 -1/上一手势残留，锁原点会把点击判成「点卡片外=取消」。命中改在抬手时用抬手时刻的
|
||
* dlx/dly（抬起时必已更新到本次最新有效坐标），与 meow_touch mt_up 语义同源。 */
|
||
|
||
/* 初始绘制：全屏压暗覆盖层 + 居中圆角卡片（fill 后画空心圆角描边） */
|
||
meow_ui_fill_rect_alpha(0, 0, W, H, 0x000000, 150);
|
||
meow_gfx_fill_round(d_x, d_y, d_w, d_h, 16, th->surface_container);
|
||
meow_ui_draw_rect_round(d_x, d_y, d_w, d_h, 16, th->outline);
|
||
if (mfont_ready) ui_draw(d_x + 18, d_y + 8, title, th->on_surface, 20);
|
||
else draw_text(d_x + 18, d_y + 8, title, 2, th->on_surface);
|
||
for (int i = 0; i < n; i++) {
|
||
int ry = d_y + title_h + i * opt_row;
|
||
int cur_sel = (i == sel);
|
||
if (cur_sel) meow_ui_fill_rect_alpha(d_x + 4, ry, d_w - 8, opt_row, th->primary, 36);
|
||
ui_draw(d_x + 18, ry + (opt_row - meow_font_line_height(20)) / 2, item[i] ? item[i] : "",
|
||
cur_sel ? 0xFFFFFF : th->on_surface, 20);
|
||
if (i == cur) meow_ui_fill_rect(d_x + d_w - 28, ry + (opt_row - 12) / 2, 12, 12, th->primary);
|
||
}
|
||
meow_dirty_full(); meow_ui_flush();
|
||
|
||
for (;;) {
|
||
if (sigterm_flag) { result = -1; break; }
|
||
kp_poll(&kp_power, NULL, NULL); kp_poll(&kp_keys, NULL, NULL);
|
||
int vold = 0, volu = 0, pwr = 0;
|
||
for (int w = 0; w < KEYBUF_WORDS; w++) {
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEDOWN % 32))) vold = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEUP % 32))) volu = 1;
|
||
if (kp_power.cur[w] & (1UL << (KEY_POWER % 32))) pwr = 1;
|
||
}
|
||
(void)kd_tick(&kd_vold, vold); (void)kd_tick(&kd_volu, volu); (void)kd_tick(&kd_pwr, pwr);
|
||
vold = kd_vold.stable; volu = kd_volu.stable; pwr = kd_pwr.stable;
|
||
int need = 0;
|
||
if (vold && !m_prev_vold && sel < n - 1) { sel++; need = 1; }
|
||
if (volu && !m_prev_volu && sel > 0) { sel--; need = 1; }
|
||
if (pwr && !m_prev_pwr) pwr_pending = 1; /* 按下：待抬起确认 */
|
||
if (!pwr && m_prev_pwr && pwr_pending) { pwr_pending = 0; result = sel; break; } /* 抬起=确认 */
|
||
m_prev_vold = vold; m_prev_volu = volu; m_prev_pwr = pwr;
|
||
|
||
/* 触摸：抬起命中选项=确认，点卡片外=取消 */
|
||
if (tfd >= 0) {
|
||
struct pollfd pfd = { tfd, POLLIN, 0 };
|
||
if (poll(&pfd, 1, 0) > 0) {
|
||
unsigned char ev[16];
|
||
while (read(tfd, ev, sizeof ev) == 16) {
|
||
uint16_t type = *(uint16_t *)(ev + 8), code = *(uint16_t *)(ev + 10);
|
||
int32_t val = *(int32_t *)(ev + 12);
|
||
if (type == EV_ABS) {
|
||
if (code == ABS_X || code == ABS_MT_POSITION_X) dlx = val;
|
||
else if (code == ABS_Y || code == ABS_MT_POSITION_Y) dly = val;
|
||
} else if (type == EV_KEY && code == BTN_TOUCH) {
|
||
if (val) {
|
||
/* 按下边沿：只标「已按下」，绝不锁原点（goodix 时序 BTN_TOUCH 先于
|
||
* ABS，此刻 dlx/dly 可能还是 -1 或上一手势残留）。 */
|
||
dtd = 1;
|
||
} else if (dtd) {
|
||
dtd = 0;
|
||
/* 抬手判定：此刻 dlx/dly 必为本次最新有效坐标（抬起时 ABS 已先到）。
|
||
* 卡片内命中 → 返回选项下标；卡片外 → 取消(-1)；从未见有效坐标 → 丢弃。 */
|
||
if (dlx >= 0 && dly >= 0) {
|
||
if (dlx >= d_x && dlx < d_x + d_w && dly >= d_y && dly < d_y + d_h) {
|
||
int i = (dly - d_y - title_h) / opt_row;
|
||
if (i >= 0 && i < n) { sel = i; result = sel; goto ddone; }
|
||
/* 卡片内但落在标题/内边距：保持弹出态，等待下一次点选 */
|
||
} else {
|
||
result = -1; goto ddone; /* 点卡片外=取消 */
|
||
}
|
||
}
|
||
/* dlx/dly 为 -1：ghost/残留抬手，丢弃不动作 */
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
if (need) {
|
||
/* 重绘覆盖层+选项（仅 sel 高亮变化） */
|
||
meow_ui_fill_rect_alpha(0, 0, W, H, 0x000000, 150);
|
||
meow_gfx_fill_round(d_x, d_y, d_w, d_h, 16, th->surface_container);
|
||
meow_ui_draw_rect_round(d_x, d_y, d_w, d_h, 16, th->outline);
|
||
if (mfont_ready) ui_draw(d_x + 18, d_y + 8, title, th->on_surface, 20);
|
||
for (int i = 0; i < n; i++) {
|
||
int ry = d_y + title_h + i * opt_row;
|
||
int cur_sel = (i == sel);
|
||
if (cur_sel) meow_ui_fill_rect_alpha(d_x + 4, ry, d_w - 8, opt_row, th->primary, 36);
|
||
ui_draw(d_x + 18, ry + (opt_row - meow_font_line_height(20)) / 2, item[i] ? item[i] : "",
|
||
cur_sel ? 0xFFFFFF : th->on_surface, 20);
|
||
if (i == cur) meow_ui_fill_rect(d_x + d_w - 28, ry + (opt_row - 12) / 2, 12, 12, th->primary);
|
||
}
|
||
meow_dirty_full(); meow_ui_flush();
|
||
}
|
||
usleep(POLL_MS * 1000);
|
||
}
|
||
ddone:
|
||
if (tfd >= 0) close(tfd);
|
||
kp_close(&kp_power); kp_close(&kp_keys);
|
||
return result;
|
||
}
|
||
|
||
/* ---- 字体行「family→字重」两级子菜单（M2.6 字重结构）----
|
||
* 一级：列出扫描到的去重 family（class 行首项「跟随全局」=空值）；选 family 后自动进入
|
||
* 二级：该 family 的可用字重（regular/bold/italic…）。选中写 out_val = 卡根相对路径
|
||
* MeowOS/fonts/<family>/<weight>/font.png（或 class 行「跟随全局」=空串）。
|
||
* 复用 s_dd_modal（与 WiFi/关于 同款模态）。返回 1=已选中（out_val 已填），0=取消。 */
|
||
static int s_font_dropdown(const srow_t *r, char *out_val, int vlen)
|
||
{
|
||
if (!r) return 0;
|
||
int is_cls = r->key && !strncmp(r->key, "font.class_", 11);
|
||
char cur[MEOW_SET_MAX_LEN];
|
||
meow_settings_get_str(r->key, cur, sizeof cur);
|
||
char curfam[64] = "", curwt[32] = "";
|
||
if (cur[0])
|
||
font_family_weight_from_png(cur, curfam, sizeof curfam, curwt, sizeof curwt);
|
||
|
||
/* ---- 一级：去重 family 列表（class 行首项「跟随全局」）---- */
|
||
char fam_slug[S_NET_MAX][64], fam_disp[S_NET_MAX][64];
|
||
int famn = 0;
|
||
if (is_cls) {
|
||
if (famn < S_NET_MAX) { snprintf(fam_slug[famn], sizeof fam_slug[0], "");
|
||
snprintf(fam_disp[famn], sizeof fam_disp[0], "跟随全局字体"); famn++; }
|
||
}
|
||
for (int i = 0; i < font_presets_n && famn < S_NET_MAX; i++) {
|
||
const char *f = font_preset_fams[i] ? font_preset_fams[i] : "";
|
||
int dup = 0;
|
||
for (int k = 0; k < famn; k++) if (!strcmp(fam_slug[k], f)) { dup = 1; break; }
|
||
if (dup) continue;
|
||
snprintf(fam_slug[famn], sizeof fam_slug[0], "%s", f);
|
||
snprintf(fam_disp[famn], sizeof fam_disp[0], "%s",
|
||
(font_preset_names[i] && font_preset_names[i][0]) ? font_preset_names[i] : f);
|
||
famn++;
|
||
}
|
||
if (famn <= 0) return 0;
|
||
const char *fitem[S_NET_MAX];
|
||
char ftext[S_NET_MAX][64];
|
||
for (int i = 0; i < famn; i++) { snprintf(ftext[i], sizeof ftext[i], "%s", fam_disp[i]); fitem[i] = ftext[i]; }
|
||
int cur_fam = is_cls ? 0 : -1;
|
||
for (int i = is_cls ? 1 : 0; i < famn; i++)
|
||
if (curfam[0] && !strcmp(fam_slug[i], curfam)) cur_fam = i;
|
||
int pick = s_dd_modal(r->label, fitem, famn, cur_fam);
|
||
if (pick < 0) return 0;
|
||
if (is_cls && pick == 0) { snprintf(out_val, vlen, ""); return 1; } /* 跟随全局 */
|
||
const char *fam = fam_slug[pick];
|
||
|
||
/* ---- 二级：该 family 的字重列表（值=完整卡根相对路径，显示=label）---- */
|
||
char wt_val[S_NET_MAX][MEOW_SET_MAX_LEN];
|
||
char wt_text[S_NET_MAX][96];
|
||
int wn = 0;
|
||
for (int i = 0; i < font_presets_n && wn < S_NET_MAX; i++) {
|
||
if (!font_preset_fams[i] || strcmp(font_preset_fams[i], fam)) continue;
|
||
snprintf(wt_val[wn], sizeof wt_val[0], "%s", font_presets[i]);
|
||
snprintf(wt_text[wn], sizeof wt_text[0], "%s", font_preset_labels[i]);
|
||
wn++;
|
||
}
|
||
if (wn <= 0) return 0; /* 该 family 无字重（理论不出现：能进 family 必已探到字重） */
|
||
const char *witem[S_NET_MAX];
|
||
for (int i = 0; i < wn; i++) witem[i] = wt_text[i];
|
||
int cur_wt = -1;
|
||
for (int i = 0; i < wn; i++) if (cur[0] && !strcmp(wt_val[i], cur)) cur_wt = i;
|
||
int wp = s_dd_modal(r->label, witem, wn, cur_wt);
|
||
if (wp < 0) return 0;
|
||
snprintf(out_val, vlen, "%s", wt_val[wp]);
|
||
return 1;
|
||
}
|
||
|
||
/* ---- 运行设置页（独立子循环；run_menu 触摸命中设置行后调用）---- */
|
||
static void run_settings_page(void)
|
||
{
|
||
int sel = s_first_setting();
|
||
int scroll_off = 0;
|
||
int H = fb_yres;
|
||
|
||
/* M2.6：进设置页扫描一次 TF 卡 MeowOS/fonts/<family>/<weight>/，刷新「字体文件」下拉。
|
||
* 进设置时卡通常在位；此步只枚举/校验，不加载（加载由 meow_font_ensure 按 font.file 决定）。 */
|
||
meow_font_scan_presets();
|
||
|
||
struct keypoll kp_power, kp_keys;
|
||
kp_open(&kp_power, DEV_POWER); kp_open(&kp_keys, DEV_KEYS);
|
||
struct kd_state kd_vold, kd_volu, kd_play, kd_pwr;
|
||
memset(&kd_vold, 0, sizeof kd_vold); memset(&kd_volu, 0, sizeof kd_volu);
|
||
memset(&kd_play, 0, sizeof kd_play); memset(&kd_pwr, 0, sizeof kd_pwr);
|
||
int m_prev_vold = 0, m_prev_volu = 0, m_prev_play = 0, m_prev_pwr = 0;
|
||
for (int w = 0; w < KEYBUF_WORDS; w++) {
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEDOWN % 32))) m_prev_vold = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEUP % 32))) m_prev_volu = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_PLAYPAUSE % 32))) m_prev_play = 1;
|
||
if (kp_power.cur[w] & (1UL << (KEY_POWER % 32))) m_prev_pwr = 1;
|
||
}
|
||
int tfd = open(DEV_TOUCH, O_RDONLY | O_NONBLOCK);
|
||
if (tfd >= 0) { unsigned char ev[16]; while (read(tfd, ev, sizeof ev) == 16) {} }
|
||
unsigned long long touch_cooldown_until = now_ms() + 300;
|
||
unsigned long long last_tick = now_ms();
|
||
unsigned long long last_act = now_ms(); /* 最近一次交互时间（自动息屏用） */
|
||
int after_modal = 0; /* 选择器子对话框刚关闭：其全屏 dim 覆盖过状态栏，需整帧重绘还原 */
|
||
|
||
/* 触摸拖动滑条状态 */
|
||
int td = 0, td_ok = 0, tdx = -1, tdy = -1, tlx = -1, tly = -1;
|
||
int drag = -1; /* 被拖动的行索引；-1=无 */
|
||
/* M2.37 列表拖动滚动状态 */
|
||
int scroll_drag = 0; /* 是否处于列表拖动滚动手势 */
|
||
int scroll_base = 0; /* 进入滚动时对应的 scroll_off 基准（连续跟手） */
|
||
int scroll_y0 = 0; /* 按下原点纵向坐标 */
|
||
int scroll_invert = 0; /* M2.38 Bug4：滑动方向切换（input.swipe_invert；0=标准方向） */
|
||
int sel_changed = 0; /* 本轮是否改变了选中行（仅此场景才强制选中行可见） */
|
||
int wake_suppress = 0; /* 自动息屏唤醒后：吸收唤醒键边沿，待全部抬起再接管 */
|
||
/* M2.x（KEY_CONTROL_DESIGN §2）电源键状态：设置页电源键 = 系统级语义（非返回），
|
||
* 对照主界面 run_menu 3130-3137 的同名变量。单击=息屏/亮屏、长按=电源菜单、8s=强关。 */
|
||
unsigned long long pwr_hold_at = 0; /* 本次电源按下计时起点 */
|
||
int pwr_menu_state = 0; /* 是否已因此次 hold 弹过电源菜单 */
|
||
int pwr_woke = 0; /* 本次按下=自动息屏唤醒（释放只唤醒不 toggle） */
|
||
int pwr_suppress_click = 0; /* 菜单刚关闭：松开不得误判单击熄屏（M2.34 同款） */
|
||
|
||
/* 首次全帧绘制 */
|
||
s_net_sync_from_sys(); /* M2.39：WiFi/蓝牙开关行同步真实硬件态 + 刷新网络信息缓存 */
|
||
scroll_off = s_clamp_scroll(sel, scroll_off);
|
||
draw_settings_page(sel, scroll_off);
|
||
meow_dirty_full(); meow_ui_flush();
|
||
|
||
for (;;) {
|
||
unsigned long long now = now_ms();
|
||
if (sigterm_flag) break;
|
||
/* 重绘触发：值/选中/滚动变化 */
|
||
int need_paint = 0;
|
||
|
||
/* ---- M2.37 自动息屏态：留在设置页，等待任意输入唤醒，恢复后重绘（不丢上下文）----
|
||
* 对照 run_menu 主循环 meow_auto_slept 的唤醒重绘（M2.17/2.18）。休眠期间仅探测
|
||
* 输入（按键原始按下 / black 模式触摸按下）；一旦唤醒：亮屏、清自动态并整帧重绘。 */
|
||
if (meow_auto_slept && !meow_screen_on) {
|
||
kp_poll(&kp_power, NULL, NULL); kp_poll(&kp_keys, NULL, NULL);
|
||
int wake = 0;
|
||
for (int w = 0; w < KEYBUF_WORDS; w++) {
|
||
if (kp_power.cur[w] & (1UL << (KEY_POWER % 32))) wake = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEDOWN % 32))) wake = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEUP % 32))) wake = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_PLAYPAUSE % 32))) wake = 1;
|
||
}
|
||
if (!wake && screen_off_mode == 1 && tfd >= 0) { /* black 模式：面板仍上电，触摸可唤醒 */
|
||
struct pollfd spfd = { tfd, POLLIN, 0 };
|
||
if (poll(&spfd, 1, 0) > 0) {
|
||
unsigned char ev[16];
|
||
while (read(tfd, ev, sizeof ev) == 16) {
|
||
uint16_t type = *(uint16_t *)(ev + 8), code = *(uint16_t *)(ev + 10);
|
||
int32_t val = *(int32_t *)(ev + 12);
|
||
if (type == EV_KEY && code == BTN_TOUCH && val) wake = 1;
|
||
}
|
||
}
|
||
}
|
||
if (wake) {
|
||
meow_panel_on();
|
||
meow_auto_slept = 0;
|
||
wake_suppress = 1;
|
||
last_act = now_ms();
|
||
/* 重置按键防抖与 m_prev_*（含唤醒键原始态对齐），并丢唤醒的这次触摸 */
|
||
memset(&kd_pwr, 0, sizeof kd_pwr); memset(&kd_vold, 0, sizeof kd_vold);
|
||
memset(&kd_volu, 0, sizeof kd_volu); memset(&kd_play, 0, sizeof kd_play);
|
||
kp_poll(&kp_power, NULL, NULL); kp_poll(&kp_keys, NULL, NULL);
|
||
m_prev_pwr = kp_is_down(&kp_power, KEY_POWER);
|
||
m_prev_vold = kp_is_down(&kp_keys, KEY_VOLUMEDOWN);
|
||
m_prev_volu = kp_is_down(&kp_keys, KEY_VOLUMEUP);
|
||
m_prev_play = kp_is_down(&kp_keys, KEY_PLAYPAUSE);
|
||
touch_cooldown_until = now_ms() + 300;
|
||
td = 0; td_ok = 0; drag = -1; scroll_drag = 0; tlx = tly = -1;
|
||
logmsg("settings: auto screen-off -> input wake, stayed in settings page");
|
||
scroll_off = s_clamp_scroll_range(scroll_off);
|
||
draw_settings_page(sel, scroll_off);
|
||
meow_dirty_full(); meow_ui_flush();
|
||
}
|
||
usleep(POLL_MS * 1000);
|
||
continue;
|
||
}
|
||
|
||
/* ---- 按键 ---- */
|
||
kp_poll(&kp_power, NULL, NULL); kp_poll(&kp_keys, NULL, NULL);
|
||
int vold = 0, volu = 0, play = 0, pwr = 0;
|
||
for (int w = 0; w < KEYBUF_WORDS; w++) {
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEDOWN % 32))) vold = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEUP % 32))) volu = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_PLAYPAUSE % 32))) play = 1;
|
||
if (kp_power.cur[w] & (1UL << (KEY_POWER % 32))) pwr = 1;
|
||
}
|
||
(void)kd_tick(&kd_vold, vold); (void)kd_tick(&kd_volu, volu);
|
||
(void)kd_tick(&kd_play, play); (void)kd_tick(&kd_pwr, pwr);
|
||
vold = kd_vold.stable; volu = kd_volu.stable;
|
||
play = kd_play.stable; pwr = kd_pwr.stable;
|
||
if (wake_suppress) {
|
||
/* 刚被唤醒：吸收唤醒键的边沿，等所有按键完全抬起后再接管动作，
|
||
* 避免「电源唤醒→抬起→被当成电源单击返回」或音量唤醒→误导航。 */
|
||
if (!pwr && !vold && !volu && !play) wake_suppress = 0;
|
||
} else {
|
||
/* M2.39：设置页音量键 = 调系统音量（写 DAC），不做光标移动（用户约束：
|
||
* 设置页仅触摸导航；音量键在电菜单/应用列表的系统级导航保持不动）。
|
||
* 按下边沿即起线性渐变（vol_ramp_begin），下方 vol_ramp_tick 逐 1% 爬 + 刷状态栏。 */
|
||
if (vold && !m_prev_vold) { settings_volume_adj(-settings_volume_step); need_paint = 1; }
|
||
if (volu && !m_prev_volu) { settings_volume_adj(+settings_volume_step); need_paint = 1; }
|
||
/* M2.x（KEY_CONTROL_DESIGN §2/§3）播放键在设置页同样被系统「抓住」：
|
||
* 捕获+日志+消费，不再映射为「返回/确认」（原 play 边沿=break 已删，播放键不再退出设置页）。
|
||
* 仍视为输入（重置自动息屏计时，与主界面 play 的媒体预留/any_input 一致）。 */
|
||
if (play && !m_prev_play) {
|
||
logmsg("settings: play key caught (media-reserved, no exit)");
|
||
last_act = now;
|
||
}
|
||
/* M2.x（KEY_CONTROL_DESIGN §2）电源键 = 系统级语义，对齐主界面 run_menu 3284-3366：
|
||
* 单击（按<长按阈值后松开）= 息屏/亮屏；长按>=longpress_menu_ms = 电源菜单；
|
||
* 按住>=forceoff_ms（且未开过菜单）= 强制关机；自动息屏按下只唤醒。
|
||
* ※ 电源键在设置页不再映射为「返回」——退出只能靠触摸（底部返回按钮 + 左缘左滑）。 */
|
||
if (pwr && !m_prev_pwr) {
|
||
pwr_hold_at = now; pwr_menu_state = 0;
|
||
pwr_suppress_click = 0; /* M2.34：新一次电源按下清除旧的抑制标志 */
|
||
last_act = now; /* 视为输入，防按住期间误触发自动息屏 */
|
||
/* M2.18 Bug 2 同款：按下正落在自动息屏态（auto_slept 且屏已关）→ 本次只做唤醒 */
|
||
if (meow_auto_slept && !meow_screen_on) pwr_woke = 1;
|
||
}
|
||
if (pwr && pwr_hold_at) {
|
||
/* M2.10/M2.11 B/M2.37 同款：8s 强关只在该「按住」从未开过菜单（!pwr_menu_state）
|
||
* 时触发；开过菜单则交给菜单内确认/取消，杜绝「开菜单->取消->仍按住->强关」残留。 */
|
||
if (now - pwr_hold_at >= power_forceoff_ms && !pwr_menu_state) {
|
||
if (sim_no_exec) { logmsg("settings pm: [sim-no-exec] POWER HOLD %dms -> would force poweroff", power_forceoff_ms); }
|
||
else { logmsg("settings pm: POWER HOLD %dms -> force poweroff", power_forceoff_ms); sys_do_reboot(LINUX_REBOOT_CMD_POWER_OFF); }
|
||
/* 关机一般不复返；若 reboot 失败返回仍按按住处理（m_prev 由下方统一复写） */
|
||
} else if (now - pwr_hold_at >= power_longpress_menu_ms && !pwr_menu_state) {
|
||
pwr_menu_state = 1;
|
||
logmsg("settings pm: POWER HOLD %dms -> show power menu", power_longpress_menu_ms);
|
||
show_power_menu(); /* 动作在函数内 system()；取消则续循环 */
|
||
last_act = now_ms(); /* 菜单返回即视为「刚有输入」，重置自动息屏计时 */
|
||
/* M2.11 B 同款：菜单已关闭。清空按住计时与菜单态，绝不把已互动的 hold 再累计到 8s 强关。 */
|
||
pwr_hold_at = 0; pwr_menu_state = 0; pwr_woke = 0;
|
||
pwr_suppress_click = 1; /* M2.34：菜单返回后抑制本次电源松开被误判单击息屏 */
|
||
/* M2.25 同款：阻塞式 show_power_menu() 期间 kd_* 冻结，m_prev_* 与稳定值可能错配，
|
||
* 重播 kd_* 并以当前 raw 对齐 m_prev_*，杜绝「菜单内触摸点取消->返回后被误判单击息屏」。 */
|
||
memset(&kd_pwr, 0, sizeof kd_pwr);
|
||
memset(&kd_vold, 0, sizeof kd_vold);
|
||
memset(&kd_volu, 0, sizeof kd_volu);
|
||
memset(&kd_play, 0, sizeof kd_play);
|
||
kp_poll(&kp_power, NULL, NULL); kp_poll(&kp_keys, NULL, NULL);
|
||
m_prev_pwr = kp_is_down(&kp_power, KEY_POWER);
|
||
m_prev_vold = kp_is_down(&kp_keys, KEY_VOLUMEDOWN);
|
||
m_prev_volu = kp_is_down(&kp_keys, KEY_VOLUMEUP);
|
||
m_prev_play = kp_is_down(&kp_keys, KEY_PLAYPAUSE);
|
||
after_modal = 1; /* 全屏 dim 覆盖过状态栏，需整帧重绘还原 */
|
||
need_paint = 1;
|
||
/* 已按 raw 对齐 m_prev_*，跳过下方基线复写，防把 raw 值覆盖回旧稳定值 → 假单边沿 */
|
||
goto settings_keys_seeded;
|
||
}
|
||
}
|
||
if (!pwr && m_prev_pwr) {
|
||
/* 松开：短按（<长按阈值且菜单未开）→ 单击 = 息屏/亮屏切换 */
|
||
if (pwr_suppress_click) {
|
||
logmsg("settings pm: power release after power-menu -> no toggle (suppress)");
|
||
} else if (pwr_hold_at && (now - pwr_hold_at < power_longpress_menu_ms) && !pwr_menu_state && !pwr_woke) {
|
||
logmsg("settings pm: power single-click -> toggle panel (was %s)", meow_screen_on ? "on" : "off");
|
||
meow_toggle_panel();
|
||
meow_auto_slept = 0; /* M2.17：手动/自动息屏后电源单击唤醒均清自动态 */
|
||
last_act = now_ms();
|
||
need_paint = 1; /* 亮屏重绘 / 息屏留屏（面板已黑，下次亮屏重绘） */
|
||
} else if (pwr_woke) {
|
||
logmsg("settings pm: power release after auto screen-off wake -> no toggle (wake only)");
|
||
}
|
||
pwr_hold_at = 0; pwr_menu_state = 0; pwr_woke = 0;
|
||
pwr_suppress_click = 0; /* M2.34：电源已松开，抑制标志一次性用完即清 */
|
||
}
|
||
}
|
||
/* M2.39：驱动音量线性渐变（长按续爬/松开即止）+ 刷新状态栏 VOL；「音量」行随 need_paint 更新 */
|
||
if (vol_ramp_dir != 0) {
|
||
int held = (vol_ramp_dir > 0) ? volu : vold;
|
||
int going = vol_ramp_tick(held);
|
||
g_sys.vol = settings_volume_get();
|
||
paint_sb_right();
|
||
need_paint = 1;
|
||
if (!going) logmsg("settings vol ramp end -> %d", g_sys.vol);
|
||
}
|
||
m_prev_vold = vold; m_prev_volu = volu; m_prev_play = play; m_prev_pwr = pwr;
|
||
settings_keys_seeded:
|
||
;
|
||
|
||
/* ---- 触摸 ---- */
|
||
if (tfd >= 0 && meow_screen_on) { /* M2.x：手动电源息屏后不处理触摸（与主界面一致，且防屏黑时误退出/误改值） */
|
||
struct pollfd pfd = { tfd, POLLIN, 0 };
|
||
if (poll(&pfd, 1, 0) > 0) {
|
||
unsigned char ev[16];
|
||
while (read(tfd, ev, sizeof ev) == 16) {
|
||
uint16_t type = *(uint16_t *)(ev + 8), code = *(uint16_t *)(ev + 10);
|
||
int32_t val = *(int32_t *)(ev + 12);
|
||
if (type == EV_ABS) {
|
||
if (code == ABS_X || code == ABS_MT_POSITION_X) tlx = val;
|
||
else if (code == ABS_Y || code == ABS_MT_POSITION_Y) tly = val;
|
||
if (td && !td_ok && tlx >= 0 && tly >= 0) {
|
||
tdx = tlx; tdy = tly; td_ok = 1;
|
||
scroll_y0 = tdy; /* 列表拖动基准：按下原点（触发时才锁 scroll_base） */
|
||
/* 按下原点落在选中滑条 track 带内 → 开始拖动 */
|
||
if (SMENU[sel].ctrl == SC_SLIDER && s_sel_track_y >= 0 &&
|
||
tlx >= S_SLIDER_X - 12 && tlx <= S_SLIDER_X + S_SLIDER_W + 12 &&
|
||
tly >= s_sel_track_y - 14 && tly <= s_sel_track_y + 20) {
|
||
drag = sel;
|
||
const srow_t *r = &SMENU[sel];
|
||
int v = s_slider_val_from_x(r, tlx);
|
||
s_slider_set_from_track(r, v, 0);
|
||
need_paint = 1;
|
||
}
|
||
}
|
||
/* M2.37 列表拖动滚动：非滑条行按下后纵向位移超阈值 → 进入列表滚动。
|
||
* scroll_base 在触发瞬间反推，保证进入滚动那一刻不跳变（连续跟手）。
|
||
* M2.38 Bug4：默认标准滑动（手指上滑 → scroll_off 增大 = 内容往下翻看后面项）；
|
||
* 方向可经 input.swipe_invert 切换（1=反向：手指上滑 → 内容上移）。 */
|
||
if (td_ok && drag < 0 && !scroll_drag) {
|
||
int ddy = tly - scroll_y0;
|
||
if (ddy >= S_SCROLL_SLOP || ddy <= -S_SCROLL_SLOP) {
|
||
scroll_drag = 1;
|
||
meow_settings_get_bool("input.swipe_invert", &scroll_invert);
|
||
scroll_base = scroll_off + (scroll_invert ? -ddy : ddy);
|
||
}
|
||
}
|
||
if (scroll_drag && td_ok) {
|
||
int dydt = tly - scroll_y0;
|
||
scroll_off = s_clamp_scroll_range(scroll_base + (scroll_invert ? dydt : -dydt));
|
||
need_paint = 1;
|
||
}
|
||
if (drag >= 0 && td_ok) {
|
||
const srow_t *r = &SMENU[drag];
|
||
int v = s_slider_val_from_x(r, tlx);
|
||
s_slider_set_from_track(r, v, 0); /* 拖动实时 set_*，抬起才落盘 */
|
||
need_paint = 1;
|
||
}
|
||
} else if (type == EV_KEY && code == BTN_TOUCH) {
|
||
if (val && !td) {
|
||
if (now_ms() < touch_cooldown_until) {
|
||
tlx = tly = -1; /* 冷却丢弃 */
|
||
} else {
|
||
td = 1; td_ok = 0; tlx = -1; tly = -1; drag = -1; scroll_drag = 0;
|
||
}
|
||
} else if (!val && td) {
|
||
td = 0;
|
||
if (drag >= 0) { /* 滑条拖动结束 → 落盘 */
|
||
const srow_t *r = &SMENU[drag];
|
||
s_commit(r, 1);
|
||
drag = -1;
|
||
need_paint = 1;
|
||
} else if (scroll_drag) {
|
||
scroll_drag = 0; /* 列表滚动结束（已实时重绘），不再当 tap */
|
||
scroll_base = 0; scroll_y0 = 0;
|
||
need_paint = 1;
|
||
} else if (td_ok) {
|
||
int dx = tlx - tdx, dy = tly - tdy;
|
||
/* M2.39 左缘右滑返回：复用全局左缘返回判定 meow_edge_back()
|
||
* （与 SDK 全局左缘返回 A-0 同语义：左缘起点 + 右滑≥MEOW_EDGE_SWIPE
|
||
* 且横向主导），避免设置页自造一套重复判定。 */
|
||
if (meow_edge_back(tdx, dx, dy)) {
|
||
if (tfd >= 0) { unsigned char e[16]; while (read(tfd, e, sizeof e) == 16) {} }
|
||
goto done;
|
||
}
|
||
int adx = dx < 0 ? -dx : dx, ady = dy < 0 ? -dy : dy;
|
||
if (adx < 60 && ady < 60) { /* 视为 tap */
|
||
int tx = tdx, ty = tdy;
|
||
/* 底部返回按钮 */
|
||
if (ty >= H - 52 && tx >= SET_CARD_X && tx <= SET_CARD_X + 120) {
|
||
if (tfd >= 0) { unsigned char e[16]; while (read(tfd, e, sizeof e) == 16) {} }
|
||
goto done;
|
||
}
|
||
int cy = ty - SET_CONTENT_Y + scroll_off;
|
||
int idx = s_row_at_content_y(cy);
|
||
if (idx >= 0 && !s_setting_idx(idx)) {
|
||
/* 点分组标题行 → 仅选中下一设置行 */
|
||
int ns = s_next_setting(idx);
|
||
sel = ns; need_paint = 1; sel_changed = 1;
|
||
} else if (idx >= 0) {
|
||
const srow_t *r = &SMENU[idx];
|
||
sel = idx; need_paint = 1; sel_changed = 1;
|
||
if (r->ctrl == SC_SWITCH) {
|
||
int on = 0; meow_settings_get_switch(r->key, &on);
|
||
meow_settings_set_switch(r->key, !on);
|
||
s_commit(r, 1);
|
||
} else if (r->ctrl == SC_LIST) {
|
||
/* M2.39 网络列表行：开下拉（重新解析）+ 重绘 + 排空本页 tfd
|
||
* （复刻 s_dropdown 后的穿透防护，见下方 ENUM/PRESET 分支）。 */
|
||
after_modal = 1;
|
||
s_net_open(r);
|
||
if (tfd >= 0) {
|
||
unsigned char e[16];
|
||
while (read(tfd, e, sizeof e) == 16) {}
|
||
usleep(40000);
|
||
while (read(tfd, e, sizeof e) == 16) {}
|
||
}
|
||
td = 0; td_ok = 0; drag = -1; scroll_drag = 0;
|
||
scroll_base = 0; scroll_y0 = 0;
|
||
tdx = tdy = tlx = tly = -1;
|
||
touch_cooldown_until = now_ms() + 300;
|
||
memset(&kd_pwr, 0, sizeof kd_pwr);
|
||
memset(&kd_vold, 0, sizeof kd_vold);
|
||
memset(&kd_volu, 0, sizeof kd_volu);
|
||
memset(&kd_play, 0, sizeof kd_play);
|
||
kp_poll(&kp_power, NULL, NULL); kp_poll(&kp_keys, NULL, NULL);
|
||
m_prev_pwr = kp_is_down(&kp_power, KEY_POWER);
|
||
m_prev_vold = kp_is_down(&kp_keys, KEY_VOLUMEDOWN);
|
||
m_prev_volu = kp_is_down(&kp_keys, KEY_VOLUMEUP);
|
||
m_prev_play = kp_is_down(&kp_keys, KEY_PLAYPAUSE);
|
||
need_paint = 1;
|
||
} else if (r->ctrl == SC_ENUM || r->ctrl == SC_PRESET) {
|
||
/* 单次点击即开选择器子对话框 */
|
||
after_modal = 1; /* 关闭后整帧重绘（还原被 dim 的状态栏） */
|
||
if (s_row_is_font(r)) {
|
||
/* M2.6 字重：字体行走「family→字重」两级子菜单 */
|
||
char fval[MEOW_SET_MAX_LEN];
|
||
if (s_font_dropdown(r, fval, sizeof fval)) {
|
||
meow_settings_set_str(r->key, fval);
|
||
s_commit(r, 1);
|
||
}
|
||
} else {
|
||
int pick = s_dropdown(r);
|
||
if (pick >= 0) {
|
||
if (r->ctrl == SC_ENUM) meow_settings_set_enum(r->key, pick);
|
||
else meow_settings_set_str(r->key, s_preset_value(r, pick));
|
||
s_commit(r, 1);
|
||
}
|
||
}
|
||
/* M2.38 Bug3：s_dropdown 返回后彻底排空本页 tfd +
|
||
* 重置触摸基线。根因：input 子系统把事件广播到所有
|
||
* 打开的 fd —— s_dropdown 用独立 fd 消费选项 tap，但
|
||
* 本页 tfd 同样收到了整套下拉会话事件；若不清空，
|
||
* 外层 while(read) 会把它们当新 tap → 穿透到下层设置项。
|
||
* 故 排空→40ms→再排空 + 重置触摸状态 + 冷却窗口吸收长尾。 */
|
||
if (tfd >= 0) {
|
||
unsigned char e[16];
|
||
while (read(tfd, e, sizeof e) == 16) {}
|
||
usleep(40000);
|
||
while (read(tfd, e, sizeof e) == 16) {}
|
||
}
|
||
td = 0; td_ok = 0; drag = -1; scroll_drag = 0;
|
||
scroll_base = 0; scroll_y0 = 0;
|
||
tdx = tdy = tlx = tly = -1;
|
||
touch_cooldown_until = now_ms() + 300;
|
||
/* 重置设置页按键防抖基线，防残边 */
|
||
memset(&kd_pwr, 0, sizeof kd_pwr);
|
||
memset(&kd_vold, 0, sizeof kd_vold);
|
||
memset(&kd_volu, 0, sizeof kd_volu);
|
||
memset(&kd_play, 0, sizeof kd_play);
|
||
kp_poll(&kp_power, NULL, NULL); kp_poll(&kp_keys, NULL, NULL);
|
||
m_prev_pwr = kp_is_down(&kp_power, KEY_POWER);
|
||
m_prev_vold = kp_is_down(&kp_keys, KEY_VOLUMEDOWN);
|
||
m_prev_volu = kp_is_down(&kp_keys, KEY_VOLUMEUP);
|
||
m_prev_play = kp_is_down(&kp_keys, KEY_PLAYPAUSE);
|
||
need_paint = 1;
|
||
} else if (r->ctrl == SC_SLIDER && tlx >= 0) {
|
||
int v = s_slider_val_from_x(r, tlx);
|
||
s_slider_set_from_track(r, v, 1);
|
||
}
|
||
}
|
||
}
|
||
}
|
||
td_ok = 0;
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
/* ---- 滚动 + 重绘 ---- */
|
||
if (need_paint) {
|
||
last_act = now;
|
||
/* 仅选中行变化时强制其可见；列表拖动滚动时保留用户滚到的位置，不把选中拉回视野 */
|
||
if (sel_changed) { scroll_off = s_clamp_scroll(sel, scroll_off); sel_changed = 0; }
|
||
draw_settings_page(sel, scroll_off);
|
||
/* 局部标脏：标题+卡片+滚动条+底部（y=42 以下全部，覆盖主题/选中/值变化），
|
||
* 状态栏(0-28)由 draw_statusbar/draw_clock 各自维护，不在此列。
|
||
* 选择器关闭后（after_modal）其全屏 dim 把状态栏也压暗了，须整帧重绘还原。 */
|
||
if (after_modal) { meow_dirty_full(); after_modal = 0; }
|
||
else meow_dirty_add(0, 42, fb_xres, fb_yres - 42);
|
||
meow_ui_flush();
|
||
}
|
||
/* M2.37 超时自动息屏（与主界面一致）：空闲 > screen_off_timeout → 关屏，但留在设置页：
|
||
* 置 meow_auto_slept 进入休眠态，由顶部睡眠门等待任意输入唤醒并重绘设置页、不丢上下文
|
||
* （对照 run_menu 外层 meow_auto_slept 的唤醒重绘，M2.17/2.18 同款语义）。 */
|
||
if (screen_off_timeout > 0 && meow_screen_on && !meow_auto_slept &&
|
||
(unsigned long long)(now - last_act) >= (unsigned long long)screen_off_timeout * 1000) {
|
||
meow_panel_off();
|
||
meow_auto_slept = 1;
|
||
wake_suppress = 1; /* 唤醒输入边沿待完全抬起后再接管，避免误动作 */
|
||
logmsg("settings: idle %ds -> auto screen-off (stay in settings)", screen_off_timeout);
|
||
}
|
||
/* ~1s 状态栏时钟刷新 */
|
||
if (now - last_tick >= 1000) {
|
||
last_tick = now;
|
||
draw_clock();
|
||
fb_norm_buf0();
|
||
meow_ui_flush();
|
||
}
|
||
usleep(POLL_MS * 1000);
|
||
}
|
||
done:
|
||
if (tfd >= 0) close(tfd);
|
||
kp_close(&kp_power); kp_close(&kp_keys);
|
||
logmsg("settings page closed");
|
||
}
|
||
|
||
/* ================================================================== */
|
||
/* 阶段B：通知中心面板（状态栏下滑，系统级叠加层，§6.1 ③ 仅框架内部） */
|
||
/* - 入口：run_menu 顶部热区下滑 → run_notif_center 阻塞子循环。 */
|
||
/* - 结构：顶部把手/标题 + 快捷开关行(WiFi/蓝牙/主题/亮度/音量) + */
|
||
/* 亮度/音量滑条 + 通知列表（app 图标+标题+内容+时间+进度）。 */
|
||
/* - 只读写 meow_settings_* / meow_notif 存储，零旁路；MD3 接 s_ui_theme()。*/
|
||
/* - 手势：面板内上滑/点空白/左缘左滑关闭（左缘复用 meow_edge_back）。 */
|
||
/* - 物理键：系统语义不变（电源=息屏/亮屏/菜单/8s强关、音量=调音量、 */
|
||
/* 播放=媒体预留），绝不映射为返回/确认/exit（APPS §3.4.1）。 */
|
||
/* - 性能：打开/交互只标面板体区域脏（状态栏 0-27 由 draw_statusbar */
|
||
/* 单独维护），绝不整屏重绘；滑条拖动实时 set_*（后端 clamp），抬手落盘。*/
|
||
/* ================================================================== */
|
||
|
||
/* ---- 面板布局常量 ---- */
|
||
#define NCP_TOP SB_BAR_H /* 28：面板顶缘（状态栏下） */
|
||
#define NCP_GRAB_Y 32
|
||
#define NCP_TITLE_Y 46
|
||
#define NCP_CHIP_Y 86
|
||
#define NCP_CHIP_H 44
|
||
#define NCP_CHIP_W 70
|
||
#define NCP_CHIP_GAP 8
|
||
#define NCP_CHIP_N 5 /* ⑥：快捷 chip 扩充为 5 个（+电源菜单） */
|
||
#define NCP_SLIDER_X 20
|
||
#define NCP_SLIDER_W (fb_xres - 40)
|
||
#define NCP_SL1_Y 162 /* 亮度滑条 track 顶（label 在 -26 =136） */
|
||
#define NCP_SL2_Y 214 /* 音量滑条 track 顶（label 在 -26 =188） */
|
||
#define NCP_DIV_Y 258
|
||
#define NCP_DND_Y 264 /* ⑥：勿扰面板内开关带顶缘（分隔线下方） */
|
||
#define NCP_DND_H 40 /* 勿扰开关带高（label+状态+s_draw_switch 48×28） */
|
||
#define NCP_LIST_TOP 308 /* 通知列表顶缘（原 266 → 下移 42 给勿扰带） */
|
||
#define NCP_LIST_BOT 694
|
||
#define NCP_ROW_H 92
|
||
#define NCP_ROW_X 12
|
||
#define NCP_ROW_W (fb_xres - 24)
|
||
#define NCP_ICON_X 26
|
||
#define NCP_TEXT_X 72
|
||
#define NCP_TEXT_W (NCP_ROW_W - (NCP_TEXT_X - NCP_ROW_X) - 10)
|
||
#define NCP_FOOT_Y 700
|
||
#define NCP_MAX_ROWS 24 /* 面板一次缓冲的通知行上限（防御） */
|
||
#define NCP_SCROLL_REBOUND_TOL 48 /* px：列表拖到顶/底仍继续拖过此容差 → 判回弹（关闭语义），
|
||
避免在边界小幅抖动即误关（> S_SCROLL_SLOP=40） */
|
||
|
||
/* ---- ⑦ 单条通知行左滑删除（跟手 + 半程可回 + 回弹）---- */
|
||
#define NCP_SWIPE_SLOP 24 /* px：行内水平位移达此值且横向主导+左移 → 进行左滑（>阈值） */
|
||
#define NCP_SWIPE_RATE 3 /* px/ms：行左滑落位动画线性速率（回弹/滑出） */
|
||
#define NCP_SWIPE_DELETE_FRAC 40 /* %：行宽百分比阈值（│off│>=row_w*40/100 → 删） */
|
||
#define NCP_SWIPE_DELETE_MIN 110 /* px：绝对像素阈值（│off│>=110 → 删；OR 语义，窄行由 frac 起作用） */
|
||
|
||
/* 勿扰过滤阈值：dnd=1 只显示 urgency>=2（HIGH=2/CRITICAL=3） */
|
||
#define NCP_DND_MIN_URGENCY 2
|
||
|
||
/* ⑧ 一键清除（勿扰对称处）：与勿扰带同排（NCP_DND_Y/H），x 对半（中线=fb_xres/2）。
|
||
* 勿扰=左半段 [NCP_ROW_X, fb_xres/2)；清除=右半段 [fb_xres/2, fb_xres-NCP_ROW_X)。 */
|
||
#define NCP_DND_SPLIT_X (fb_xres / 2) /* 勿扰/清除带分割中线（左右对称） */
|
||
|
||
/* ---- 开关平移动画（§9：状态时间轴 + 快照 blit 平移，不整屏重绘）---- */
|
||
#define NCP_ANIM_FIX 1024 /* 进度 p 的定点分母（1/1024 精度） */
|
||
#define NCP_ANIM_MS 180 /* 单程打开/关闭时长（ms，真机可调） */
|
||
|
||
/* chip 索引（⑥：第 5 个 = 电源菜单，点击唤起既有系统电源菜单 show_power_menu） */
|
||
enum { NCP_CHIP_WIFI=0, NCP_CHIP_BT=1, NCP_CHIP_THEME=2, NCP_CHIP_BRIGHT=3,
|
||
NCP_CHIP_POWER=4, NCP_CHIP_COUNT=5 };
|
||
|
||
/* 通知行快照（面板读取字段 + 缓存的 icon 句柄）。 */
|
||
typedef struct {
|
||
uint32_t id;
|
||
char app_id[MEOW_NOTIF_APP_ID_MAX];
|
||
char summary[MEOW_NOTIF_SUMMARY_MAX];
|
||
char body[MEOW_NOTIF_BODY_MAX];
|
||
char icon[MEOW_NOTIF_ICON_MAX];
|
||
char target[MEOW_NOTIF_ACTIVITY_MAX];
|
||
uint64_t created_ms;
|
||
int progress;
|
||
uint8_t urgency;
|
||
meow_img *img; /* 缓存图标（meow_img_load_file 结果；NULL=回退首字符圆点） */
|
||
} ncp_row_t;
|
||
|
||
static ncp_row_t g_rows[NCP_MAX_ROWS];
|
||
static int g_nrows = 0;
|
||
static struct app *g_ncp_apps = NULL; /* run_notif_center 注入（通知点击找 app 用） */
|
||
static int g_ncp_napps = 0;
|
||
|
||
/* ⑥ 勿扰面板内开关：当前 dnd 态（开面板/切换时从 meow_settings notify.dnd 读/写，零旁路）。
|
||
* ncp_collect_cb / ncp_active_count 按它过滤行（only urgency>=NCP_DND_MIN_URGENCY when on）。 */
|
||
static int g_ncp_dnd = 0;
|
||
|
||
/* ⑦ 行左滑删除的绘制态（供 ncp_draw_list / ncp_repaint_row 画该行位移）。
|
||
* g_ncp_swipe_row = 正在左滑的行下标（-1=无）；g_ncp_swipe_off = 该行左移量（px，<=0）。
|
||
* run_notif_center 的手势状态机（row_swipe_row/row_off/row_settle/row_off_target/row_anim_at/row_paint）
|
||
* 与其同步，绘制只读这组全局，避免给 draw_notif_center/ncp_draw_list 加参数。 */
|
||
static int g_ncp_swipe_row = -1;
|
||
static int g_ncp_swipe_off = 0;
|
||
|
||
/* 短串拷贝（同 meow_notif.c 语义：保证 NUL + 截断） */
|
||
static void ncp_strncpy(char *dst, const char *src, size_t len)
|
||
{
|
||
if (!dst || len == 0) return;
|
||
if (!src) { dst[0] = 0; return; }
|
||
strncpy(dst, src, len - 1);
|
||
dst[len - 1] = 0;
|
||
}
|
||
|
||
/* app_id → 显示名（apps[] 匹配则用 name，否则原样 app_id；无则空串） */
|
||
static const char *ncp_app_name(const char *app_id)
|
||
{
|
||
if (app_id && g_ncp_apps)
|
||
for (int i = 0; i < g_ncp_napps; i++)
|
||
if (!strcmp(g_ncp_apps[i].id, app_id)) return g_ncp_apps[i].name;
|
||
return app_id ? app_id : "";
|
||
}
|
||
|
||
/* 通知图标加载回调：把 app_icon（相对卡根/绝对）解成绝对路径，加载 meow_img。 */
|
||
static void ncp_load_icon(ncp_row_t *r)
|
||
{
|
||
if (!r) return;
|
||
r->img = NULL;
|
||
if (!r->icon[0]) return;
|
||
char path[MEOW_NOTIF_ICON_MAX + 80];
|
||
if (r->icon[0] == '/') snprintf(path, sizeof path, "%s", r->icon);
|
||
else snprintf(path, sizeof path, "/usr/data/mnt/sd_0/%s", r->icon);
|
||
r->img = meow_img_load_file(path);
|
||
}
|
||
|
||
static int ncp_collect_cb(const meow_notif_t *n, void *ctx)
|
||
{
|
||
(void)ctx;
|
||
if (g_nrows >= NCP_MAX_ROWS) return 1; /* 满：中止遍历 */
|
||
/* 勿扰（⑥）：dnd 开时只收集 urgency>=NCP_DND_MIN_URGENCY（HIGH/CRITICAL）。 */
|
||
if (!mnp_dnd_should_show(n->urgency, g_ncp_dnd)) return 0;
|
||
ncp_row_t *r = &g_rows[g_nrows++];
|
||
memset(r, 0, sizeof *r);
|
||
r->id = n->id;
|
||
ncp_strncpy(r->app_id, n->app_id, sizeof r->app_id);
|
||
ncp_strncpy(r->summary, n->summary, sizeof r->summary);
|
||
ncp_strncpy(r->body, n->body, sizeof r->body);
|
||
ncp_strncpy(r->icon, n->app_icon, sizeof r->icon);
|
||
ncp_strncpy(r->target, n->target_activity, sizeof r->target);
|
||
r->created_ms = n->created_ms;
|
||
r->progress = n->progress;
|
||
r->urgency = n->urgency;
|
||
ncp_load_icon(r);
|
||
return 0;
|
||
}
|
||
|
||
/* 释放全部缓存图标 + 清行数（面板关闭/列表刷新前用）。 */
|
||
static void ncp_rows_free(void)
|
||
{
|
||
for (int i = 0; i < g_nrows; i++)
|
||
if (g_rows[i].img) { meow_img_free(g_rows[i].img); g_rows[i].img = NULL; }
|
||
g_nrows = 0;
|
||
}
|
||
|
||
/* 重新采集通知列表（比 meow_notif_count 变化时调用）。 */
|
||
static int ncp_refresh_rows(void)
|
||
{
|
||
ncp_rows_free();
|
||
meow_notif_list(NULL, ncp_collect_cb, NULL);
|
||
return g_nrows;
|
||
}
|
||
|
||
/* 当前应显示的活跃通知数（按 g_ncp_dnd 过滤，与 g_rows 同口径）——供变化检测/重采集用。 */
|
||
static int ncp_count_cb(const meow_notif_t *n, void *ctx)
|
||
{
|
||
if (!mnp_dnd_should_show(n->urgency, g_ncp_dnd)) return 0;
|
||
(*(int *)ctx)++;
|
||
return 0;
|
||
}
|
||
static int ncp_active_count(void)
|
||
{
|
||
int c = 0;
|
||
meow_notif_list(NULL, ncp_count_cb, &c);
|
||
if (c > NCP_MAX_ROWS) c = NCP_MAX_ROWS;
|
||
return c;
|
||
}
|
||
|
||
/* 通知列表是否变化（按过滤后活跃数比；新条/撤下/TTL 释放都反映在 count，含 dnd 过滤）。 */
|
||
static int ncp_rows_changed(void)
|
||
{
|
||
return ncp_active_count() != g_nrows;
|
||
}
|
||
|
||
/* ---- 开关平移动画辅助（§9：快照 blit + 平移；只在 run_notif_center 内分配/释放）----
|
||
* g_ncp_ph = 面板高 PH = fb_yres - NCP_TOP；两块快照各 PH × fb_line 字节：
|
||
* bg_snap = 进入面板时（绘制面板前）从 back_buf 行 [NCP_TOP, NCP_TOP+PH) 拍的背景（应用列表）；
|
||
* panel_snap= 最终位置整面板渲染（draw_notif_center 后拍），稳态重绘后刷新。
|
||
* 快照不可用（分配失败/无 fb）时动画降级为瞬时显示/消失（fallback）。 */
|
||
static unsigned char *g_ncp_bg_snap = NULL;
|
||
static unsigned char *g_ncp_panel_snap = NULL;
|
||
static int g_ncp_ph = 0;
|
||
|
||
static void ncp_snap_init(void)
|
||
{
|
||
int ph = fb_yres - NCP_TOP;
|
||
if (ph <= 0 || fb_line <= 0) { g_ncp_ph = 0; return; }
|
||
size_t bsz = (size_t)ph * (size_t)fb_line;
|
||
g_ncp_bg_snap = malloc(bsz);
|
||
g_ncp_panel_snap = malloc(bsz);
|
||
if (!g_ncp_bg_snap || !g_ncp_panel_snap) {
|
||
free(g_ncp_bg_snap); g_ncp_bg_snap = NULL;
|
||
free(g_ncp_panel_snap); g_ncp_panel_snap = NULL;
|
||
g_ncp_ph = 0;
|
||
return;
|
||
}
|
||
g_ncp_ph = ph;
|
||
}
|
||
static void ncp_snap_free(void)
|
||
{
|
||
free(g_ncp_bg_snap); g_ncp_bg_snap = NULL;
|
||
free(g_ncp_panel_snap); g_ncp_panel_snap = NULL;
|
||
g_ncp_ph = 0;
|
||
}
|
||
|
||
/* 从 back_buf 行 [NCP_TOP, NCP_TOP+PH) 拷贝到 dst（行宽 fb_line）。 */
|
||
static void ncp_snap_copy_rows(unsigned char *dst, const unsigned char *base)
|
||
{
|
||
if (!dst || g_ncp_ph <= 0) return;
|
||
size_t row = (size_t)fb_line;
|
||
for (int i = 0; i < g_ncp_ph; i++)
|
||
memcpy(dst + (size_t)i * row, base + (size_t)i * row, row);
|
||
}
|
||
/* 拍背景（应用列表）：进入面板时、面板绘制前调用。 */
|
||
static void ncp_snap_bg(void)
|
||
{
|
||
ncp_snap_copy_rows(g_ncp_bg_snap, fb + (size_t)NCP_TOP * fb_line);
|
||
}
|
||
/* 拍最终整面板：draw_notif_center 画完后 / 每次稳态重绘后调用。 */
|
||
static void ncp_snap_panel(void)
|
||
{
|
||
ncp_snap_copy_rows(g_ncp_panel_snap, fb + (size_t)NCP_TOP * fb_line);
|
||
}
|
||
|
||
/* 重建动画帧：把 back_buf 面板区 [NCP_TOP..) 还原为「背景 + 平移后的面板」。
|
||
* off∈[-PH,0]；prev_bot=上一帧覆盖底缘（exclusive），用于关（收窄）时恢复新露出背景条。
|
||
* 返回本帧覆盖底缘（exclusive，供调用方算脏区与传给下次）。 */
|
||
static int ncp_anim_rebuild(int off, int prev_bot)
|
||
{
|
||
if (!g_ncp_bg_snap || !g_ncp_panel_snap || g_ncp_ph <= 0) return NCP_TOP;
|
||
int top = NCP_TOP;
|
||
int ph = g_ncp_ph;
|
||
int cur_bot = mnp_anim_covered_bot(top, ph, off); /* ∈[top, top+ph]（§9.3 裁切） */
|
||
if (cur_bot < top) cur_bot = top;
|
||
if (cur_bot > top + ph) cur_bot = top + ph;
|
||
size_t row = (size_t)fb_line;
|
||
/* 1) 面板收窄（收回中）：[cur_bot, prev_bot) 新露出 → 恢复背景（应用列表）。 */
|
||
if (prev_bot > cur_bot) {
|
||
int b0 = prev_bot < top + ph ? prev_bot : top + ph;
|
||
for (int sy = cur_bot; sy < b0; sy++)
|
||
memcpy(fb + (size_t)sy * row,
|
||
g_ncp_bg_snap + (size_t)(sy - top) * row, row);
|
||
}
|
||
/* 2) 贴平移面板：[top, cur_bot) 从 panel_snap 行 yy = sy-(top+off) 拷回。 */
|
||
for (int sy = top; sy < cur_bot; sy++) {
|
||
int yy = sy - (top + off); /* ∈[0, ph)（见 §9.3 裁切论证） */
|
||
if (yy < 0) yy = 0;
|
||
if (yy >= ph) yy = ph - 1;
|
||
memcpy(fb + (size_t)sy * row,
|
||
g_ncp_panel_snap + (size_t)yy * row, row);
|
||
}
|
||
return cur_bot;
|
||
}
|
||
|
||
/* ⑨ 应用一帧面板动画（开关时间轴 §9 与跟手拖动 ⑨ 共用）：把 back_buf 面板区重建为
|
||
* 「背景 + 平移后的面板」并标脏/呈现。p=当前进度；prev_bot=上一帧覆盖底缘（exclusive，
|
||
* 回填本帧）；ok=快照可用（否则 no-op，动画降级为瞬时）。只刷面板矩形 + 新露出条，
|
||
* 顶= NCP_TOP（不盖状态栏）、不含 [0,NCP_TOP) 带；不重排面板控件（panel_snap 固定）。 */
|
||
static void ncp_anim_frame(int p, int *prev_bot, int ok)
|
||
{
|
||
if (!ok || g_ncp_ph <= 0 || !prev_bot) return;
|
||
int off = mnp_anim_off(p, NCP_ANIM_FIX, g_ncp_ph);
|
||
int cur_bot = ncp_anim_rebuild(off, *prev_bot);
|
||
int maxb = (*prev_bot > cur_bot) ? *prev_bot : cur_bot;
|
||
*prev_bot = cur_bot;
|
||
meow_dirty_add(0, NCP_TOP, fb_xres, maxb - NCP_TOP);
|
||
meow_ui_flush();
|
||
}
|
||
|
||
/* 把文本按宽度截断（UTF-8 安全：不切开多字节码），超出加 "..."。 */
|
||
static void ncp_text(int x, int y, const char *s, int size, uint32_t color, int maxw)
|
||
{
|
||
if (!s) s = "";
|
||
if (ui_width(s, size) <= maxw) { ui_draw(x, y, s, color, size); return; }
|
||
int ell = ui_width("...", size);
|
||
int limit = maxw - ell;
|
||
int len = 0;
|
||
char buf[128];
|
||
while (s[len] && len < (int)sizeof buf - 8) {
|
||
/* 取当前字节对应的 UTF-8 码长（1-4），避免切断多字节字符 */
|
||
unsigned char c0 = (unsigned char)s[len];
|
||
int cp = 1;
|
||
if ((c0 & 0xE0) == 0xC0) cp = 2;
|
||
else if ((c0 & 0xF0) == 0xE0) cp = 3;
|
||
else if ((c0 & 0xF8) == 0xF0) cp = 4;
|
||
if (len + cp >= (int)sizeof buf - 1) break;
|
||
for (int k = 0; k < cp; k++) buf[len + k] = s[len + k];
|
||
buf[len + cp] = 0;
|
||
if (ui_width(buf, size) > limit) { buf[len] = 0; break; }
|
||
len += cp;
|
||
}
|
||
if (len > 0) {
|
||
if (len + 3 < (int)sizeof buf) { buf[len] = '.'; buf[len+1] = '.'; buf[len+2] = '.'; buf[len+3] = 0; }
|
||
ui_draw(x, y, buf, color, size);
|
||
} else {
|
||
ui_draw(x, y, "...", color, size);
|
||
}
|
||
}
|
||
|
||
/* 画一个小圆点（近似圆 = 圆角方 r=radius；主题 chip 用）。 */
|
||
static void ncp_dot(int cx, int cy, int r, uint32_t col)
|
||
{
|
||
meow_gfx_fill_round(cx - r, cy - r, r * 2, r * 2, r, col);
|
||
}
|
||
|
||
/* 画 32×32 图标（复用 sb_blit_icon；ink 垂直中心对齐 cy）。 */
|
||
static void ncp_sb_icon(int icon, int slot_x, int cy, uint32_t col, int ink_h)
|
||
{
|
||
int saved = g_sb_icon_cy;
|
||
g_sb_icon_cy = cy;
|
||
sb_blit_icon(icon, slot_x, col, ink_h);
|
||
g_sb_icon_cy = saved;
|
||
}
|
||
|
||
/* chip 位置（4 个，居中排布）。返回下标对应 chip 的 x 左缘。 */
|
||
static int ncp_chip_x(int chip)
|
||
{
|
||
int total = NCP_CHIP_N * NCP_CHIP_W + (NCP_CHIP_N - 1) * NCP_CHIP_GAP;
|
||
int x0 = (fb_xres - total) / 2;
|
||
return x0 + chip * (NCP_CHIP_W + NCP_CHIP_GAP);
|
||
}
|
||
static int ncp_chip_hit(int chip, int tx, int ty)
|
||
{
|
||
int x = ncp_chip_x(chip);
|
||
return (tx >= x && tx < x + NCP_CHIP_W && ty >= NCP_CHIP_Y && ty < NCP_CHIP_Y + NCP_CHIP_H);
|
||
}
|
||
|
||
/* 面板当前 4 个 chip 的状态（① 能否写入/取值在 meow_settings_*；② 显示用）。 */
|
||
static void ncp_chip_state(int chip, int *on, char *val, int vlen)
|
||
{
|
||
*on = 0;
|
||
if (val && vlen > 0) val[0] = 0;
|
||
if (chip == NCP_CHIP_WIFI) {
|
||
int v = 0; meow_settings_get_switch("network.wifi_enabled", &v);
|
||
*on = v;
|
||
} else if (chip == NCP_CHIP_BT) {
|
||
int v = 0; meow_settings_get_switch("network.bluetooth_enabled", &v);
|
||
*on = v;
|
||
} else if (chip == NCP_CHIP_THEME) {
|
||
int v = 0; meow_settings_get_enum("display.theme", &v); /* dark=0, light=1 */
|
||
*on = (v == 1);
|
||
if (val && vlen > 0) snprintf(val, vlen, "%s", *on ? "浅色" : "深色");
|
||
} else if (chip == NCP_CHIP_BRIGHT) {
|
||
int v = 0; meow_settings_get_int("display.brightness", &v);
|
||
int vmin = 1; meow_settings_get_int("display.brightness_min", &vmin);
|
||
int vc = mnp_brightness_clamp(v, vmin);
|
||
if (val && vlen > 0) snprintf(val, vlen, "%d%%", vc);
|
||
*on = (vc >= 50); /* 过半视为"亮"态 */
|
||
} else if (chip == NCP_CHIP_POWER) {
|
||
/* 电源菜单 chip：非开关（无 on/off 态），恒示中性；点击由 ncp_chip_apply 唤起电源菜单。 */
|
||
*on = 0;
|
||
}
|
||
}
|
||
|
||
/* chip 快捷动作（写 meow_settings_* + 侧效应；零手写文件）。
|
||
* 返回 1=主题变化（需重刷状态栏）；2=电源菜单已弹出（调用方置 after_modal=1 整帧重绘还原）；
|
||
* 0=其它。电源菜单 chip 复用既有系统级 show_power_menu（含 dim/圆钮/音量导航/电源确认/8s强关/
|
||
* 空闲自动息屏），真弹对话框，动作在函数内 system()；取消则返回续 panel —— 与电源键长按同款。 */
|
||
static int ncp_chip_apply(int chip)
|
||
{
|
||
if (chip == NCP_CHIP_WIFI) {
|
||
int v = 0; meow_settings_get_switch("network.wifi_enabled", &v);
|
||
meow_settings_set_switch("network.wifi_enabled", !v);
|
||
s_net_toggle_wifi(!v);
|
||
s_net_refresh();
|
||
} else if (chip == NCP_CHIP_BT) {
|
||
int v = 0; meow_settings_get_switch("network.bluetooth_enabled", &v);
|
||
meow_settings_set_switch("network.bluetooth_enabled", !v);
|
||
s_net_toggle_bt(!v);
|
||
s_net_refresh();
|
||
} else if (chip == NCP_CHIP_THEME) {
|
||
/* 快捷主题：切到 manual（确保生效），再翻转 dark/light（display.theme）。 */
|
||
int mode = THEME_MODE_MANUAL;
|
||
meow_settings_get_enum("display.theme_mode", &mode);
|
||
if (mode != THEME_MODE_MANUAL) meow_settings_set_enum("display.theme_mode", THEME_MODE_MANUAL);
|
||
int v = 0; meow_settings_get_enum("display.theme", &v);
|
||
meow_settings_set_enum("display.theme", v ? 0 : 1);
|
||
paint_sb_right(); /* 状态栏文字/底色随主题刷新 */
|
||
meow_settings_save();
|
||
return 1; /* 主题变化 → 重刷状态栏 */
|
||
} else if (chip == NCP_CHIP_BRIGHT) {
|
||
/* 快捷亮度：在「极暗(下限)」与「100」之间切换。 */
|
||
int cur = 0; meow_settings_get_int("display.brightness", &cur);
|
||
int vmin = 1; meow_settings_get_int("display.brightness_min", &vmin);
|
||
if (mnp_brightness_clamp(cur, vmin) < 100) {
|
||
meow_settings_set_int("display.brightness", 100);
|
||
write_brightness(100);
|
||
g_sys.brightness = 100;
|
||
} else {
|
||
meow_settings_set_int("display.brightness", vmin);
|
||
write_brightness(vmin);
|
||
g_sys.brightness = vmin;
|
||
}
|
||
paint_sb_right();
|
||
} else if (chip == NCP_CHIP_POWER) {
|
||
/* 电源菜单 chip：唤起既有系统级电源菜单（真弹对话框，动作在函数内 system()；取消则返回）。
|
||
* 不涉及任何设置项（电源菜单不走 meow_settings，零旁路）。返回 2 → 调用方整帧重绘还原面板/状态栏。 */
|
||
logmsg("notif-center: power chip -> show power menu");
|
||
show_power_menu();
|
||
return 2;
|
||
}
|
||
meow_settings_save();
|
||
return 0;
|
||
}
|
||
|
||
/* ⑦ 画删除底：行右缘被空出的条（宽=-off）铺 error 红底 + 白「删除」字（条宽≥44 才显字，否则纯红渐进）。
|
||
* off<=0（负得多=卡滑出多、露出右条多）；off=0 不画。 */
|
||
static void ncp_draw_delete_bg(int ry, int off, const meow_ui_theme_t *th)
|
||
{
|
||
if (off >= 0) return;
|
||
int bw = -off;
|
||
if (bw <= 0) return;
|
||
int bx = NCP_ROW_X + NCP_ROW_W + off; /* 被空出的右条左缘 */
|
||
fill_rect(bx, ry, bw, NCP_ROW_H - 6, th->error);
|
||
if (bw >= 44) {
|
||
int cx = bx + bw / 2, cy = ry + (NCP_ROW_H - 6) / 2;
|
||
ui_draw(cx - ui_width("删除", 16) / 2, cy - meow_font_line_height(16) / 2,
|
||
"删除", 0xFFFFFF, 16);
|
||
}
|
||
}
|
||
|
||
/* 画一行内容（行卡 + 图标/APP名/时间/标题/正文/进度），整体随 off 左移（⑦ 行左滑跟手）。
|
||
* i=g_rows 下标；ry=行顶（已含 scroll）；off=行左移量（px，<=0）。 */
|
||
static void ncp_draw_row(int i, int ry, int off, const meow_ui_theme_t *th)
|
||
{
|
||
const ncp_row_t *r = &g_rows[i];
|
||
meow_gfx_fill_round(NCP_ROW_X + off, ry, NCP_ROW_W, NCP_ROW_H - 6, 12, th->surface_container);
|
||
/* 图标 */
|
||
int icx = NCP_ICON_X + off, icy = ry + (NCP_ROW_H - 32) / 2;
|
||
if (r->img) meow_ui_img_cover(icx, icy, 32, r->img);
|
||
else {
|
||
/* 回退：主题色圆点 + 首字符 */
|
||
const char *nm = ncp_app_name(r->app_id);
|
||
ncp_dot(icx + 16, icy + 16, 16, th->primary);
|
||
char ch = nm[0] ? nm[0] : '?';
|
||
char cbuf[4] = { ch, 0, 0, 0 };
|
||
/* 首字符若是多字节（中文），取整码 */
|
||
if ((unsigned char)ch >= 0x80 && nm[1]) { cbuf[1] = nm[1]; cbuf[2] = 0;
|
||
if ((unsigned char)ch >= 0xE0 && nm[2]) { cbuf[2] = nm[2]; cbuf[3] = 0; } }
|
||
int cw = ui_width(cbuf, 20);
|
||
ui_draw(icx + 16 - cw / 2, icy + 16 - meow_font_line_height(20) / 2, cbuf, 0xFFFFFF, 20);
|
||
}
|
||
/* app 名 + 时间 */
|
||
ui_draw(NCP_TEXT_X + off, ry + 10, ncp_app_name(r->app_id), th->on_surface_variant, 16);
|
||
char tbuf[32]; mnp_time_ago(r->created_ms, (uint64_t)time(NULL) * 1000u, tbuf, sizeof tbuf);
|
||
ui_draw(NCP_ROW_X + NCP_ROW_W - 8 - ui_width(tbuf, 16) + off, ry + 12, tbuf, th->on_surface_variant, 16);
|
||
/* 标题 + 内容 */
|
||
ncp_text(NCP_TEXT_X + off, ry + 30, r->summary, 20, th->on_surface, NCP_TEXT_W);
|
||
ncp_text(NCP_TEXT_X + off, ry + 56, r->body, 18, th->on_surface_variant, NCP_TEXT_W);
|
||
/* 进度（progress>=0）：细条 */
|
||
if (r->progress >= 0) {
|
||
int px = NCP_TEXT_X + off, pw = NCP_TEXT_W, py = ry + NCP_ROW_H - 14;
|
||
fill_rect(px, py, pw, 4, th->surface_variant);
|
||
int fw = r->progress * pw / 100;
|
||
if (fw > 0) fill_rect(px, py, fw, 4, th->primary);
|
||
}
|
||
}
|
||
|
||
/* 绘制通知列表可见区（scroll=像素偏移）。每行：图标 + app名 + 标题 + 内容 + 时间 + 进度。
|
||
* ⑦：左滑中的行（g_ncp_swipe_row）按 g_ncp_swipe_off 左移，其下先画删除底（ncp_draw_delete_bg）。 */
|
||
static void ncp_draw_list(int scroll)
|
||
{
|
||
const meow_ui_theme_t *th = s_ui_theme();
|
||
if (g_nrows == 0) {
|
||
ui_draw(NCP_ROW_X + 8, NCP_LIST_TOP + 40, "暂无通知", th->on_surface_variant, 22);
|
||
return;
|
||
}
|
||
int total = g_nrows * NCP_ROW_H;
|
||
scroll = mnp_scroll_clamp(scroll, total, NCP_LIST_BOT - NCP_LIST_TOP);
|
||
for (int i = 0; i < g_nrows; i++) {
|
||
int ry = NCP_LIST_TOP + i * NCP_ROW_H - scroll;
|
||
if (ry + NCP_ROW_H < NCP_LIST_TOP || ry >= NCP_LIST_BOT) continue; /* 视口外整行跳过 */
|
||
int off = (i == g_ncp_swipe_row) ? g_ncp_swipe_off : 0; /* 左滑中的行位移 */
|
||
if (off < 0) ncp_draw_delete_bg(ry, off, th);
|
||
ncp_draw_row(i, ry, off, th);
|
||
}
|
||
/* 滚动条 */
|
||
if (total > NCP_LIST_BOT - NCP_LIST_TOP) {
|
||
int view = NCP_LIST_BOT - NCP_LIST_TOP;
|
||
int thumb_h = view * view / total; if (thumb_h < 24) thumb_h = 24;
|
||
int ty = NCP_LIST_TOP + (view - thumb_h) * scroll / (total - view);
|
||
meow_gfx_fill_round(fb_xres - 8, NCP_LIST_TOP, 5, view, 3, th->surface_container);
|
||
meow_gfx_fill_round(fb_xres - 8, ty, 5, thumb_h, 3, th->on_surface_variant);
|
||
}
|
||
}
|
||
|
||
/* 仅重绘列表可见区（滚动专用；不整面板、不刷状态栏）。先清列表底（面板 surface_variant），
|
||
* 再画可见行 + 滚动条；只标列表带脏（[NCP_LIST_TOP, NCP_LIST_BOT)），面板体其它控件 / 状态栏带
|
||
* [0,NCP_TOP) 均不触碰 —— 满足「滚动只重绘列表可视区，绝不整屏」。 */
|
||
static void ncp_repaint_list(int scroll)
|
||
{
|
||
const meow_ui_theme_t *th = s_ui_theme();
|
||
fill_rect(0, NCP_LIST_TOP, fb_xres, NCP_LIST_BOT - NCP_LIST_TOP, th->surface_variant);
|
||
ncp_draw_list(scroll);
|
||
meow_dirty_add(0, NCP_LIST_TOP, fb_xres, NCP_LIST_BOT - NCP_LIST_TOP);
|
||
meow_ui_flush();
|
||
}
|
||
|
||
/* ⑦ 仅重绘一行（行左滑跟手/回弹/滑出专用；只刷该行矩形，不整面板、不刷状态栏）。
|
||
* 清该行带（含被滑出的右条）→ 画删除底（若 off<0）+ 该行内容位移 → 只标该行带脏。 */
|
||
static void ncp_repaint_row(int scroll, int row, int off)
|
||
{
|
||
const meow_ui_theme_t *th = s_ui_theme();
|
||
if (row < 0 || row >= g_nrows) return;
|
||
int ry = NCP_LIST_TOP + row * NCP_ROW_H - scroll;
|
||
if (ry + NCP_ROW_H < NCP_LIST_TOP || ry >= NCP_LIST_BOT) return; /* 视口外：无需重绘 */
|
||
/* 清该行带全宽（含左缘 [0,NCP_ROW_X)，因深滑时卡可滑到左缘外），再画删除底 + 位移行卡。 */
|
||
fill_rect(0, ry, NCP_ROW_X + NCP_ROW_W, NCP_ROW_H, th->surface_variant);
|
||
if (off < 0) ncp_draw_delete_bg(ry, off, th);
|
||
ncp_draw_row(row, ry, off, th);
|
||
meow_dirty_add(0, ry, fb_xres, NCP_ROW_H);
|
||
meow_ui_flush();
|
||
}
|
||
|
||
/* ⑥/⑧ 勿扰开关带命中（面板内小 toggle，⑧ 收窄为左半段）：
|
||
* 落在 [NCP_DND_Y, NCP_DND_Y+NCP_DND_H) 且 x ∈ [0, NCP_DND_SPLIT_X) → 勿扰命中。
|
||
* 右半段归「一键清除」（ncp_clear_hit，互斥）；不与 5 chip（y≤130）、滑条带（y≤238）、
|
||
* 通知列表（y≥NCP_LIST_TOP=308）、状态栏（y<28）重叠。 */
|
||
static int ncp_dnd_hit(int tx, int ty)
|
||
{
|
||
return (ty >= NCP_DND_Y && ty < NCP_DND_Y + NCP_DND_H &&
|
||
tx >= 0 && tx < NCP_DND_SPLIT_X);
|
||
}
|
||
|
||
/* ⑧ 一键清除带命中（勿扰对称处的右半段）：
|
||
* 落在 [NCP_DND_Y, NCP_DND_Y+NCP_DND_H) 且 x ∈ [NCP_DND_SPLIT_X, fb_xres) → 清除命中。 */
|
||
static int ncp_clear_hit(int tx, int ty)
|
||
{
|
||
return (ty >= NCP_DND_Y && ty < NCP_DND_Y + NCP_DND_H &&
|
||
tx >= NCP_DND_SPLIT_X && tx < fb_xres);
|
||
}
|
||
|
||
/* ⑥ 绘勿扰带（⑧ 收窄为左半段）：label「勿扰」+ 铃铛图标 + 状态「开/关」 + 左半段右侧 s_draw_switch(48×28)。
|
||
* 右半段由 ncp_draw_clear 画「一键清除」按钮（对称）。 */
|
||
static void ncp_draw_dnd(const meow_ui_theme_t *th)
|
||
{
|
||
int y = NCP_DND_Y;
|
||
int dnd_on = g_ncp_dnd;
|
||
int cy = y + NCP_DND_H / 2;
|
||
/* 铃铛（简化：圆顶 + 顶蒂 + 底部小圆点）。 */
|
||
int bx = NCP_ROW_X + 4, bcy = cy - 2;
|
||
meow_gfx_fill_round(bx, bcy - 7, 16, 13, 7, th->on_surface_variant); /* 铃身圆顶 */
|
||
meow_gfx_fill_round(bx + 6, bcy - 11, 4, 4, 2, th->on_surface_variant);/* 顶蒂 */
|
||
ncp_dot(bx + 8, bcy + 6, 2, th->on_surface_variant); /* 底部小圆点 */
|
||
/* label + 状态 */
|
||
ui_draw(bx + 22, cy - meow_font_line_height(18) / 2 + 2, "勿扰", th->on_surface, 18);
|
||
char st[16];
|
||
snprintf(st, sizeof st, "%s", dnd_on ? "开" : "关");
|
||
int lw = ui_width("勿扰", 18);
|
||
ui_draw(bx + 22 + lw + 12, cy - meow_font_line_height(18) / 2 + 2, st,
|
||
dnd_on ? th->primary : th->on_surface_variant, 18);
|
||
/* 左半段右侧开关（⑧：从原 fb_xres-24-48 左移到分割线左侧，48×28 垂直居中） */
|
||
s_draw_switch(NCP_DND_SPLIT_X - 6 - 48, cy - 14, dnd_on, th);
|
||
}
|
||
|
||
/* ⑧ 绘一键清除按钮（勿扰对称处的右半段）：圆角按钮底 + 垃圾桶字形 + 「清除」文字。 */
|
||
static void ncp_draw_clear(const meow_ui_theme_t *th)
|
||
{
|
||
int y = NCP_DND_Y;
|
||
int cy = y + NCP_DND_H / 2;
|
||
int cx0 = NCP_DND_SPLIT_X + 8; /* 右半段按钮左缘 */
|
||
int cw = (fb_xres - NCP_ROW_X) - cx0; /* 右半段按钮宽 */
|
||
if (cw <= 0) return;
|
||
meow_gfx_fill_round(cx0, y + 4, cw, NCP_DND_H - 8, 12, th->surface_container);
|
||
/* 垃圾桶字形（简化：顶盖横条 + 桶身圆角 + 侧提手）+「清除」文字，整体在按钮内居中（美观对称）。 */
|
||
const char *lbl = "清除";
|
||
int lw = ui_width(lbl, 18);
|
||
int unit = 22; /* 图标占位宽 + 与文字的间距 */
|
||
int total = unit + lw;
|
||
int gx = cx0 + (cw - total) / 2; /* 图标左缘(居中) */
|
||
int icy = cy;
|
||
fill_rect(gx, icy - 7, 14, 2, th->on_surface_variant); /* 顶盖 */
|
||
meow_gfx_fill_round(gx + 1, icy - 3, 12, 12, 2, th->on_surface_variant);/* 桶身 */
|
||
meow_gfx_fill_round(gx - 2, icy - 6, 4, 3, 1, th->on_surface_variant);/* 侧提手左 */
|
||
meow_gfx_fill_round(gx + 14, icy - 6, 4, 3, 1, th->on_surface_variant);/* 侧提手右 */
|
||
ui_draw(gx + unit, cy - meow_font_line_height(18) / 2 + 2, lbl, th->on_surface, 18);
|
||
}
|
||
|
||
/* ---- ⑧ 一键清除（批量）：先转储留档 → 再清空显示（红线：保留 ongoing/media/progress）---- */
|
||
typedef struct { uint32_t ids[NCP_MAX_ROWS]; int n; } ncp_clear_ctx_t;
|
||
static int ncp_clear_collect_cb(const meow_notif_t *n, void *ctx)
|
||
{
|
||
ncp_clear_ctx_t *c = ctx;
|
||
if (!mnp_clearable(n->ongoing, n->media, n->progress)) return 0; /* 保留红线项 */
|
||
if (c->n >= NCP_MAX_ROWS) return 1; /* 满：中止遍历 */
|
||
c->ids[c->n++] = n->id;
|
||
return 0;
|
||
}
|
||
/* 收集可清除通知 id 后逐条 dismiss（dismiss = archive_one(dump→TF) + 释放槽 = 转储留档 + 清出显示）。
|
||
* 返回清除条数。 */
|
||
static int ncp_clear_all(void)
|
||
{
|
||
ncp_clear_ctx_t c;
|
||
memset(&c, 0, sizeof c);
|
||
meow_notif_list(NULL, ncp_clear_collect_cb, &c);
|
||
for (int i = 0; i < c.n; i++) meow_notif_dismiss(c.ids[i]);
|
||
return c.n;
|
||
}
|
||
|
||
/* 绘制整个通知中心面板（画进 SDK back_buf；redraw_sb=1 时另绘状态栏在最顶）。
|
||
* 性能：面板体单独；(0..27) 状态栏只在打开/主题变化时 redraw_sb=1 重绘，交互时跳过，
|
||
* 使脏区仅限面板体，绝不整屏重绘。 */
|
||
static void draw_notif_center(int scroll, int redraw_sb)
|
||
{
|
||
const meow_ui_theme_t *th = s_ui_theme();
|
||
int W = fb_xres, H = fb_yres;
|
||
/* 状态栏带 [0,NCP_TOP) 仅当 redraw_sb=1（打开/主题变化）时清底，随后由下方 draw_statusbar()
|
||
* 覆盖重绘；redraw_sb=0（交互重绘，如拖滑条）时**绝不触碰**——保留 back_buf 中 paint_sb_right()
|
||
* 已绘好的状态栏，避免被清成 surface 底仍被 blit → 状态栏数值闪烁/消失（真机①修复）。
|
||
* 面板体（状态栏之下 surface_variant）态恒整片铺。 */
|
||
if (redraw_sb) fill_rect(0, 0, W, NCP_TOP, th->surface);
|
||
fill_rect(0, NCP_TOP, W, H - NCP_TOP, th->surface_variant);
|
||
|
||
/* 把手 */
|
||
int grab_w = 44, grab_x = (W - grab_w) / 2;
|
||
meow_gfx_fill_round(grab_x, NCP_GRAB_Y, grab_w, 6, 3, th->outline);
|
||
/* 标题 + 「上滑/点空白关闭」 提示 */
|
||
ui_draw(24, NCP_TITLE_Y, "通知中心", th->on_surface, 22);
|
||
ui_draw(W - 24 - ui_width("点空白关闭", 16), NCP_TITLE_Y + 2, "点空白关闭", th->on_surface_variant, 16);
|
||
|
||
/* 快捷开关行（⑥：5 个 = WiFi/蓝牙/主题/亮度/电源菜单，居中自动随 NCP_CHIP_N） */
|
||
static const char *chip_lbl[NCP_CHIP_COUNT] = { "WiFi", "蓝牙", "主题", "亮度", "电源菜单" };
|
||
int total_chip = NCP_CHIP_N * NCP_CHIP_W + (NCP_CHIP_N - 1) * NCP_CHIP_GAP;
|
||
int chip_x0 = (W - total_chip) / 2;
|
||
for (int c = 0; c < NCP_CHIP_N; c++) {
|
||
int cx = chip_x0 + c * (NCP_CHIP_W + NCP_CHIP_GAP);
|
||
int on = 0; char val[16] = ""; ncp_chip_state(c, &on, val, sizeof val);
|
||
uint32_t bg = on ? th->primary : th->surface_container;
|
||
uint32_t fg = on ? 0xFFFFFF : th->on_surface_variant;
|
||
meow_gfx_fill_round(cx, NCP_CHIP_Y, NCP_CHIP_W, NCP_CHIP_H, 12, bg);
|
||
int icon_cx = cx + (NCP_CHIP_W - SB_ICON_SIZE) / 2;
|
||
int icon_cy = NCP_CHIP_Y + 14;
|
||
if (c == NCP_CHIP_WIFI) ncp_sb_icon(on ? SB_I_WIFI : SB_I_WIFI_OFF, icon_cx, icon_cy, fg, 22);
|
||
else if (c == NCP_CHIP_BT) ncp_sb_icon(on ? SB_I_BT : SB_I_BT_DIS, icon_cx, icon_cy, fg, 22);
|
||
else if (c == NCP_CHIP_THEME) {
|
||
if (on) ncp_dot(icon_cx + 16, icon_cy, 11, fg);
|
||
else { ncp_dot(icon_cx + 16, icon_cy, 11, fg); ncp_dot(icon_cx + 16, icon_cy, 6, bg); }
|
||
}
|
||
else if (c == NCP_CHIP_BRIGHT) ncp_sb_icon(SB_I_BRIGHT, icon_cx, icon_cy, fg, 22);
|
||
else if (c == NCP_CHIP_POWER) {
|
||
/* 电源符号：圆环 + 顶部短柄，近似 ⏻（用现有 meow_gfx_fill_round 近似圆）。 */
|
||
int pc = icon_cx + SB_ICON_SIZE / 2;
|
||
meow_gfx_fill_round(pc - 8, icon_cy - 8, 16, 16, 8, fg); /* 外环 */
|
||
meow_gfx_fill_round(pc - 4, icon_cy - 4, 8, 8, 4, bg); /* 内孔（显环厚） */
|
||
meow_gfx_fill_round(pc - 1, icon_cy - 16, 3, 9, 1, fg); /* 顶部短柄 */
|
||
}
|
||
char label[24];
|
||
snprintf(label, sizeof label, "%s", chip_lbl[c]);
|
||
if (val[0] && c == NCP_CHIP_BRIGHT)
|
||
snprintf(label, sizeof label, "%.9s", val); /* chip 下示值 */
|
||
ui_draw(cx + (NCP_CHIP_W - ui_width(label, 14)) / 2, NCP_CHIP_Y + NCP_CHIP_H - 18,
|
||
label, fg, 14);
|
||
}
|
||
|
||
/* 亮度滑条 */
|
||
int bmin = 1; meow_settings_get_int("display.brightness_min", &bmin);
|
||
int bval = 0; meow_settings_get_int("display.brightness", &bval);
|
||
bval = mnp_brightness_clamp(bval, bmin);
|
||
ui_draw(NCP_SLIDER_X, NCP_SL1_Y - 26, "亮度", th->on_surface, 18);
|
||
char vbb[16]; snprintf(vbb, sizeof vbb, "%d%%", bval);
|
||
ui_draw(NCP_SLIDER_X + NCP_SLIDER_W - ui_width(vbb, 18), NCP_SL1_Y - 26, vbb,
|
||
th->on_surface_variant, 18);
|
||
s_draw_slider(NCP_SLIDER_X, NCP_SL1_Y, NCP_SLIDER_W, bval, bmin, 100, th);
|
||
|
||
/* 音量滑条 */
|
||
int vval = 0; meow_settings_get_int("audio.volume", &vval);
|
||
vval = vol_clamp(vval);
|
||
ui_draw(NCP_SLIDER_X, NCP_SL2_Y - 26, "音量", th->on_surface, 18);
|
||
char vbl[16]; snprintf(vbl, sizeof vbl, "%d%%", vval);
|
||
ui_draw(NCP_SLIDER_X + NCP_SLIDER_W - ui_width(vbl, 18), NCP_SL2_Y - 26, vbl,
|
||
th->on_surface_variant, 18);
|
||
s_draw_slider(NCP_SLIDER_X, NCP_SL2_Y, NCP_SLIDER_W, vval, 0, vol_clamp(100), th);
|
||
|
||
/* 分隔线 */
|
||
fill_rect(12, NCP_DIV_Y, W - 24, 1, th->outline);
|
||
|
||
/* ⑥ 勿扰面板内开关带（list 上方，左半段） */
|
||
ncp_draw_dnd(th);
|
||
/* ⑧ 一键清除按钮（勿扰对称处的右半段） */
|
||
ncp_draw_clear(th);
|
||
|
||
/* 通知列表 */
|
||
ncp_draw_list(scroll);
|
||
|
||
/* 底部提示 */
|
||
ui_draw((W - ui_width("上滑或点空白关闭", 16)) / 2, NCP_FOOT_Y, "上滑或点空白关闭",
|
||
th->on_surface_variant, 16);
|
||
|
||
/* 状态栏画在面板体之上（0-27 单独由 draw_statusbar 维护/标脏，不落面板体脏区）。
|
||
* 仅 redraw_sb=1（打开/主题变化）才重绘，交互时跳过以保持脏区只限面板体。 */
|
||
if (redraw_sb) draw_statusbar();
|
||
}
|
||
|
||
/* 触摸滑条带命中：origin 落在 (slugX, slugY) 的滑条行带内。返回 1=命中。 */
|
||
static int ncp_slider_band(int tx, int ty, int sy)
|
||
{
|
||
return (tx >= NCP_SLIDER_X - 14 && tx <= NCP_SLIDER_X + NCP_SLIDER_W + 14 &&
|
||
ty >= sy - 30 && ty <= sy + 24);
|
||
}
|
||
|
||
/* 滑条值应用（拖动实时 set_*，save_now=抬手落盘）。
|
||
* 复用设置页方案：亮度 clamp [bmin,100]；音量 vol_clamp 上限 + 跳步吸附 + DAC 节流去抖。
|
||
* 返回 1=值实际变更（需重绘面板/刷状态栏）；0=吸附+钳制后与当前已提交值相同（懒跳过：
|
||
* 不写 DAC/背光、不刷状态栏、不标脏）→ 拖动去抖，消除逐事件刷状态栏/DAC 的卡顿（真机②修复）。
|
||
* 亮度写背光仅 sysfs 不引额外节流；音量写 DAC 节流（meow_dac_vol_write_throttled/flush 同 s_commit）。 */
|
||
static int ncp_slider_apply(int which, int tx, int save_now)
|
||
{
|
||
if (which == 1) {
|
||
int bmin = 1; meow_settings_get_int("display.brightness_min", &bmin);
|
||
int v = mnp_slider_val_from_x(tx, NCP_SLIDER_X, NCP_SLIDER_W, bmin, 100);
|
||
v = mnp_brightness_clamp(v, bmin); /* 下限 brightness_min(≥1)、上限 100 */
|
||
int cur = 0; meow_settings_get_int("display.brightness", &cur);
|
||
if (!save_now && v == mnp_brightness_clamp(cur, bmin)) return 0; /* 去抖：值未变（含 clamp 后） */
|
||
meow_settings_set_int("display.brightness", v);
|
||
write_brightness(v);
|
||
g_sys.brightness = v; /* 状态栏数值源=最近写入值（含 clamp 后） */
|
||
paint_sb_right();
|
||
if (save_now) meow_settings_save();
|
||
return 1;
|
||
} else {
|
||
int vmax = vol_clamp(settings_volume_max); /* 音量上限（尊重 audio.volume_max） */
|
||
int v = mnp_slider_val_from_x(tx, NCP_SLIDER_X, NCP_SLIDER_W, 0, vmax);
|
||
v = mnp_step_round(v, settings_volume_step); /* 跳步吸附（默认 step=1 → 连续同设置页） */
|
||
v = vol_clamp(v); /* 0..MEOW_VOL_MAX + 上限 clamp */
|
||
if (!save_now && v == settings_volume_get()) return 0; /* 去抖：值未变跳过写 DAC/刷状态栏 */
|
||
meow_settings_set_int("audio.volume", v);
|
||
g_sys.vol = settings_volume_get(); /* 状态栏数值源=最近写入值（含 clamp 后） */
|
||
paint_sb_right();
|
||
if (save_now) { meow_dac_vol_flush(); meow_settings_save(); } /* 抬手=无条件直写 DAC */
|
||
else meow_dac_vol_write_throttled();/* 拖动中=墙钟节流写 DAC */
|
||
return 1;
|
||
}
|
||
}
|
||
|
||
/* 通知点击：dismiss（标记阅读）+ 若 app 有 entry 记录则请求启动。返回 1=应关闭面板。 */
|
||
static int ncp_row_tap(int tx, int ty, int scroll, int *want_launch)
|
||
{
|
||
int eff = ty - NCP_LIST_TOP + scroll;
|
||
int row = mnp_row_at(eff, 0, g_nrows * NCP_ROW_H, NCP_ROW_H);
|
||
if (row < 0 || row >= g_nrows) return 0;
|
||
const ncp_row_t *r = &g_rows[row];
|
||
meow_notif_dismiss(r->id); /* 点击 = 阅读，撤下 */
|
||
/* 跳转：app entry 记录（apps[] 内且 ok）→ 记 want_launch（run_menu 走标准启动）。
|
||
* target_activity 为后续 M3 导航预留下的跳转目标（activity 级路由后置）。 */
|
||
if (want_launch) *want_launch = -1;
|
||
if (g_ncp_apps)
|
||
for (int i = 0; i < g_ncp_napps; i++)
|
||
if (!strcmp(g_ncp_apps[i].id, r->app_id) && g_ncp_apps[i].ok) {
|
||
if (want_launch) *want_launch = i;
|
||
break;
|
||
}
|
||
return 1; /* 点击即关（启动由 run_menu 执行；无记录则仅关闭） */
|
||
}
|
||
|
||
/* ---- 通知中心面板主循环（阻塞；参照 run_settings_page 交互惯用法）---- */
|
||
static void run_notif_center(struct app *apps, int napps, int *want_launch,
|
||
int live_open, int lox, int loy)
|
||
{
|
||
if (want_launch) *want_launch = -1;
|
||
int list_scroll = 0;
|
||
unsigned char evbuf16[16];
|
||
g_ncp_apps = apps; g_ncp_napps = napps;
|
||
|
||
struct keypoll kp_power, kp_keys;
|
||
kp_open(&kp_power, DEV_POWER); kp_open(&kp_keys, DEV_KEYS);
|
||
struct kd_state kd_vold, kd_volu, kd_play, kd_pwr;
|
||
memset(&kd_vold, 0, sizeof kd_vold); memset(&kd_volu, 0, sizeof kd_volu);
|
||
memset(&kd_play, 0, sizeof kd_play); memset(&kd_pwr, 0, sizeof kd_pwr);
|
||
int m_prev_vold = 0, m_prev_volu = 0, m_prev_play = 0, m_prev_pwr = 0;
|
||
for (int w = 0; w < KEYBUF_WORDS; w++) {
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEDOWN % 32))) m_prev_vold = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEUP % 32))) m_prev_volu = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_PLAYPAUSE % 32))) m_prev_play = 1;
|
||
if (kp_power.cur[w] & (1UL << (KEY_POWER % 32))) m_prev_pwr = 1;
|
||
}
|
||
int tfd = open(DEV_TOUCH, O_RDONLY | O_NONBLOCK);
|
||
if (tfd >= 0) { unsigned char ev[16]; while (read(tfd, ev, sizeof ev) == 16) {} }
|
||
unsigned long long touch_cooldown_until = now_ms() + 300;
|
||
unsigned long long last_tick = now_ms();
|
||
unsigned long long last_act = now_ms();
|
||
unsigned long long last_listchk = now_ms();
|
||
|
||
int td = 0, td_ok = 0, tdx = -1, tdy = -1, tlx = -1, tly = -1;
|
||
int drag_slider = 0; /* 0=无, 1=亮度, 2=音量 */
|
||
/* 通知列表拖动滚动（方向遵循 input.swipe_invert，与设置页列表同式；关闭手势区分见 §11.3） */
|
||
int scroll_drag = 0; /* 是否处于列表区拖动滚动手势 */
|
||
int scroll_base = 0; /* 进入滚动时锁定的 list_scroll 基准（连续跟手，防触发瞬间跳变） */
|
||
int scroll_y0 = 0; /* 按下原点纵向坐标 */
|
||
int scroll_invert = 0; /* input.swipe_invert（0=标准方向） */
|
||
int scroll_rebound = 0; /* 拖到顶/底仍继续拖（回弹）→ 抬手按关闭语义收起 */
|
||
int list_paint = 0; /* 仅列表区重绘（滚动专用，不整面板/不刷状态栏） */
|
||
/* ⑦ 单条通知行左滑删除（跟手+半程可回+回弹；绘制态见 g_ncp_swipe_row/off）：
|
||
* row_swipe_row = 正在左滑的行下标（-1=无）；row_off = 行左移量（px，<=0，跟手）；
|
||
* row_settle = 0 跟手 / 1 松手后向 row_off_target 回弹或滑出；row_anim_at = 落位动画计时。
|
||
* row_paint = 仅重绘该行带（跟手局部 blit/位移，不整面板/不刷状态栏）。 */
|
||
int row_swipe_row = -1;
|
||
int row_off = 0;
|
||
int row_settle = 0;
|
||
int row_off_target = 0;
|
||
unsigned long long row_anim_at = 0;
|
||
int row_paint = 0; /* 仅重绘该行带（行左滑专用） */
|
||
/* ⑨ 面板跟手下拉、半程可回：
|
||
* panel_drag = 1 面板跟手拖动中（anim_p 直接由手指位移映射，状态时间轴暂停）；
|
||
* drag_seed_reveal = 进入拖动时锁定的面板「露出高度」（= ph + off，防触发瞬间跳变）；
|
||
* drag_y0 = 进入拖动时锁定手指 y（此后 reveal = seed + (tly - drag_y0)，连续跟手/半程可回）；
|
||
* drag_paint = 仅用动画重建路径重绘一帧（复用 §9 快照 blit，不整屏/不重排控件）。 */
|
||
int panel_drag = 0;
|
||
int drag_seed_reveal = 0;
|
||
int drag_y0 = 0;
|
||
int drag_paint = 0;
|
||
int closed = 0; /* 非动画路径的兜底关面板（快照不可用时瞬时退出） */
|
||
int after_modal = 0; /* 电源菜单返回：整帧重绘还原被 dim 的状态栏 */
|
||
int wake_suppress = 0;
|
||
unsigned long long pwr_hold_at = 0;
|
||
int pwr_menu_state = 0, pwr_woke = 0, pwr_suppress_click = 0;
|
||
|
||
int need_sb = 1; /* 打开/主题变化时重绘状态栏；其余交互跳过（脏区只限面板体） */
|
||
|
||
/* 开关平移动画状态（§9）：anim_p∈[0,NCP_ANIM_FIX]，anim_target 为意图（FIX=开、0=关）。
|
||
* 仅当快照可用（anim_ok）才做平滑动画；否则降级为瞬时显示/消失（closed 兜底）。 */
|
||
int anim_p = 0, anim_target = NCP_ANIM_FIX;
|
||
int anim_last_target = NCP_ANIM_FIX; /* 记录上一步 anim_target（用于检测「意图切换」重置计时） */
|
||
unsigned long long anim_last = 0;
|
||
int anim_prev_bot = NCP_TOP; /* 上一帧面板覆盖底缘（exclusive；初始=NCP_TOP=未覆盖） */
|
||
int anim_ok = 0;
|
||
|
||
/* ⑨ live_open 入口（run_menu 热区拖动中切入）：手指此刻已按下且正拖动。
|
||
* - 触摸：直接以传入原点作「已按下已锁原点」（evdev 广播，本 fd 只接后续 move/release）。
|
||
* - 进度：面板从隐藏（anim_p=0）起步，target 未定（=0），由拖动路径实时映射 anim_p；
|
||
* 松手按阈值锚定 target。默认（非 live_open）仍为 trigger 式自动展开（防御路径）。 */
|
||
if (live_open) {
|
||
td = 1; td_ok = 1; tdx = lox; tdy = loy; scroll_y0 = tdy;
|
||
anim_target = 0; anim_last_target = 0; /* 待拖动/松手锚定 */
|
||
}
|
||
|
||
/* ⑥ 读勿扰面板内开关态（开面板一次；切换在下面 tap 分支写回）。 */
|
||
{
|
||
int d = 0; meow_settings_get_bool("notify.dnd", &d);
|
||
g_ncp_dnd = d;
|
||
}
|
||
|
||
/* 首次绘制：先拍背景（应用列表）→ 渲染最终位置整面板 → 拍面板快照 → 还原背景到 p=0
|
||
* 起点（面板隐藏、先露应用列表），随后进入循环由动画推进 p:0→FIX 滑入。 */
|
||
ncp_refresh_rows();
|
||
list_scroll = mnp_scroll_clamp(0, g_nrows * NCP_ROW_H, NCP_LIST_BOT - NCP_LIST_TOP);
|
||
ncp_snap_init();
|
||
if (g_ncp_ph > 0) {
|
||
anim_ok = 1;
|
||
ncp_snap_bg(); /* 背景（应用列表）在面板绘制前拍 */
|
||
draw_notif_center(list_scroll, 1); /* 渲染最终位置整面板 → back_buf */
|
||
ncp_snap_panel(); /* 拍面板快照 */
|
||
/* 起点 p=0：按「上一帧为全覆盖(NCP_TOP+PH)」重建 → 整段还原为背景（面板隐藏） */
|
||
anim_prev_bot = ncp_anim_rebuild(mnp_anim_off(0, NCP_ANIM_FIX, g_ncp_ph),
|
||
NCP_TOP + g_ncp_ph);
|
||
meow_dirty_add(0, NCP_TOP, fb_xres, fb_yres - NCP_TOP);
|
||
meow_ui_flush();
|
||
} else {
|
||
draw_notif_center(list_scroll, 1);
|
||
meow_dirty_full(); meow_ui_flush();
|
||
}
|
||
need_sb = 0;
|
||
anim_last = now_ms();
|
||
|
||
int need_paint = 0; /* 持久：跨 tick 保持（动画进行中延迟到稳态再画） */
|
||
|
||
for (;;) {
|
||
unsigned long long now = now_ms();
|
||
if (sigterm_flag) break;
|
||
int animating = anim_ok && (anim_p != anim_target);
|
||
|
||
/* 自动息屏（同设置页语义） */
|
||
if (meow_auto_slept && !meow_screen_on) {
|
||
kp_poll(&kp_power, NULL, NULL); kp_poll(&kp_keys, NULL, NULL);
|
||
int wak = 0;
|
||
for (int w = 0; w < KEYBUF_WORDS; w++) {
|
||
if (kp_power.cur[w] & (1UL << (KEY_POWER % 32))) wak = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEDOWN % 32))) wak = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEUP % 32))) wak = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_PLAYPAUSE % 32))) wak = 1;
|
||
}
|
||
if (!wak && screen_off_mode == 1 && tfd >= 0) {
|
||
struct pollfd spfd = { tfd, POLLIN, 0 };
|
||
if (poll(&spfd, 1, 0) > 0) {
|
||
unsigned char ev[16];
|
||
while (read(tfd, ev, sizeof ev) == 16) {
|
||
uint16_t type = *(uint16_t *)(ev + 8), code = *(uint16_t *)(ev + 10);
|
||
int32_t val = *(int32_t *)(ev + 12);
|
||
if (type == EV_KEY && code == BTN_TOUCH && val) wak = 1;
|
||
}
|
||
}
|
||
}
|
||
if (wak) {
|
||
meow_panel_on(); meow_auto_slept = 0; wake_suppress = 1; last_act = now_ms();
|
||
memset(&kd_pwr, 0, sizeof kd_pwr); memset(&kd_vold, 0, sizeof kd_vold);
|
||
memset(&kd_volu, 0, sizeof kd_volu); memset(&kd_play, 0, sizeof kd_play);
|
||
kp_poll(&kp_power, NULL, NULL); kp_poll(&kp_keys, NULL, NULL);
|
||
m_prev_pwr = kp_is_down(&kp_power, KEY_POWER);
|
||
m_prev_vold = kp_is_down(&kp_keys, KEY_VOLUMEDOWN);
|
||
m_prev_volu = kp_is_down(&kp_keys, KEY_VOLUMEUP);
|
||
m_prev_play = kp_is_down(&kp_keys, KEY_PLAYPAUSE);
|
||
touch_cooldown_until = now_ms() + 300;
|
||
td = 0; td_ok = 0; drag_slider = 0; tlx = tly = -1;
|
||
scroll_drag = 0; scroll_base = 0; scroll_y0 = 0;
|
||
scroll_invert = 0; scroll_rebound = 0; list_paint = 0;
|
||
row_swipe_row = -1; row_off = 0; row_settle = 0;
|
||
row_off_target = 0; row_anim_at = 0; row_paint = 0;
|
||
g_ncp_swipe_row = -1; g_ncp_swipe_off = 0;
|
||
panel_drag = 0; drag_seed_reveal = 0; drag_y0 = 0; drag_paint = 0;
|
||
/* 唤醒：面板直接就位（不重播滑入动画，面板早已打开）；重拍快照防内容已变 */
|
||
anim_p = anim_target = anim_last_target = NCP_ANIM_FIX;
|
||
if (anim_ok) anim_prev_bot = NCP_TOP + g_ncp_ph;
|
||
draw_notif_center(list_scroll, 1);
|
||
if (anim_ok) ncp_snap_panel();
|
||
meow_dirty_full(); meow_ui_flush();
|
||
anim_last = now_ms();
|
||
need_sb = 0;
|
||
}
|
||
usleep(POLL_MS * 1000);
|
||
continue;
|
||
}
|
||
|
||
/* 按键：系统语义（APP §3.4.1 红线——不映射返回/确认） */
|
||
kp_poll(&kp_power, NULL, NULL); kp_poll(&kp_keys, NULL, NULL);
|
||
int vold = 0, volu = 0, play = 0, pwr = 0;
|
||
for (int w = 0; w < KEYBUF_WORDS; w++) {
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEDOWN % 32))) vold = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEUP % 32))) volu = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_PLAYPAUSE % 32))) play = 1;
|
||
if (kp_power.cur[w] & (1UL << (KEY_POWER % 32))) pwr = 1;
|
||
}
|
||
(void)kd_tick(&kd_vold, vold); (void)kd_tick(&kd_volu, volu);
|
||
(void)kd_tick(&kd_play, play); (void)kd_tick(&kd_pwr, pwr);
|
||
vold = kd_vold.stable; volu = kd_volu.stable;
|
||
play = kd_play.stable; pwr = kd_pwr.stable;
|
||
if (wake_suppress) {
|
||
if (!pwr && !vold && !volu && !play) wake_suppress = 0;
|
||
} else {
|
||
if (vold && !m_prev_vold) { settings_volume_adj(-settings_volume_step); need_paint = 1; }
|
||
if (volu && !m_prev_volu) { settings_volume_adj(+settings_volume_step); need_paint = 1; }
|
||
if (play && !m_prev_play) {
|
||
logmsg("notif-center: play key caught (media-reserved, no exit)");
|
||
last_act = now;
|
||
}
|
||
if (pwr && !m_prev_pwr) {
|
||
pwr_hold_at = now; pwr_menu_state = 0; pwr_suppress_click = 0; last_act = now;
|
||
if (meow_auto_slept && !meow_screen_on) pwr_woke = 1;
|
||
}
|
||
if (pwr && pwr_hold_at) {
|
||
if (now - pwr_hold_at >= power_forceoff_ms && !pwr_menu_state) {
|
||
if (sim_no_exec) logmsg("notif-center pm: [sim-no-exec] hold %dms -> would forceoff", power_forceoff_ms);
|
||
else { logmsg("notif-center pm: hold %dms -> force poweroff", power_forceoff_ms); sys_do_reboot(LINUX_REBOOT_CMD_POWER_OFF); }
|
||
} else if (now - pwr_hold_at >= power_longpress_menu_ms && !pwr_menu_state) {
|
||
pwr_menu_state = 1;
|
||
logmsg("notif-center pm: hold %dms -> power menu", power_longpress_menu_ms);
|
||
show_power_menu();
|
||
last_act = now_ms();
|
||
pwr_hold_at = 0; pwr_menu_state = 0; pwr_woke = 0; pwr_suppress_click = 1;
|
||
memset(&kd_pwr, 0, sizeof kd_pwr); memset(&kd_vold, 0, sizeof kd_vold);
|
||
memset(&kd_volu, 0, sizeof kd_volu); memset(&kd_play, 0, sizeof kd_play);
|
||
kp_poll(&kp_power, NULL, NULL); kp_poll(&kp_keys, NULL, NULL);
|
||
m_prev_pwr = kp_is_down(&kp_power, KEY_POWER);
|
||
m_prev_vold = kp_is_down(&kp_keys, KEY_VOLUMEDOWN);
|
||
m_prev_volu = kp_is_down(&kp_keys, KEY_VOLUMEUP);
|
||
m_prev_play = kp_is_down(&kp_keys, KEY_PLAYPAUSE);
|
||
after_modal = 1; need_paint = 1;
|
||
goto ncp_keys_seeded;
|
||
}
|
||
}
|
||
if (!pwr && m_prev_pwr) {
|
||
if (pwr_suppress_click)
|
||
logmsg("notif-center pm: release after menu -> no toggle");
|
||
else if (pwr_hold_at && (now - pwr_hold_at < power_longpress_menu_ms) && !pwr_menu_state && !pwr_woke) {
|
||
logmsg("notif-center pm: single-click -> toggle panel");
|
||
meow_toggle_panel(); meow_auto_slept = 0; last_act = now_ms(); need_paint = 1;
|
||
} else if (pwr_woke) {
|
||
logmsg("notif-center pm: release after wake -> no toggle");
|
||
}
|
||
pwr_hold_at = 0; pwr_menu_state = 0; pwr_woke = 0; pwr_suppress_click = 0;
|
||
}
|
||
}
|
||
if (vol_ramp_dir != 0) {
|
||
int held = (vol_ramp_dir > 0) ? volu : vold;
|
||
int going = vol_ramp_tick(held);
|
||
g_sys.vol = settings_volume_get();
|
||
paint_sb_right();
|
||
need_paint = 1;
|
||
if (!going) logmsg("notif-center vol ramp end -> %d", g_sys.vol);
|
||
}
|
||
m_prev_vold = vold; m_prev_volu = volu; m_prev_play = play; m_prev_pwr = pwr;
|
||
ncp_keys_seeded:
|
||
;
|
||
|
||
/* 触摸 */
|
||
if (tfd >= 0 && meow_screen_on) {
|
||
/* 面板是否就位（稳态开）：就位才允许控件交互；动画中抑制 chip/滑条/通知行命中
|
||
* （面板在滑，控件坐标已定但只部分可见，命中会误触——见 §9.5）。 */
|
||
int open_settled = anim_ok ? (anim_target >= NCP_ANIM_FIX && anim_p >= NCP_ANIM_FIX) : 1;
|
||
struct pollfd pfd = { tfd, POLLIN, 0 };
|
||
if (poll(&pfd, 1, 0) > 0) {
|
||
while (read(tfd, evbuf16, sizeof evbuf16) == 16) {
|
||
uint16_t type = *(uint16_t *)(evbuf16 + 8), code = *(uint16_t *)(evbuf16 + 10);
|
||
int32_t val = *(int32_t *)(evbuf16 + 12);
|
||
if (type == EV_ABS) {
|
||
if (code == ABS_X || code == ABS_MT_POSITION_X) tlx = val;
|
||
else if (code == ABS_Y || code == ABS_MT_POSITION_Y) tly = val;
|
||
if (td && !td_ok && tlx >= 0 && tly >= 0) {
|
||
tdx = tlx; tdy = tly; td_ok = 1;
|
||
scroll_y0 = tdy; /* 列表拖动基准：按下原点（进滚动时才锁 scroll_base） */
|
||
/* 按下原点落在滑条带 → 开始拖动（仅面板就位） */
|
||
if (open_settled && drag_slider == 0) {
|
||
if (ncp_slider_band(tlx, tly, NCP_SL1_Y)) { drag_slider = 1; if (ncp_slider_apply(1, tlx, 0)) need_paint = 1; }
|
||
else if (ncp_slider_band(tlx, tly, NCP_SL2_Y)) { drag_slider = 2; if (ncp_slider_apply(2, tlx, 0)) need_paint = 1; }
|
||
}
|
||
}
|
||
if (drag_slider == 1 && td_ok) { if (ncp_slider_apply(1, tlx, 0)) need_paint = 1; }
|
||
else if (drag_slider == 2 && td_ok) { if (ncp_slider_apply(2, tlx, 0)) need_paint = 1; }
|
||
/* ⑦ 行左滑（进入）：面板就位（open_settled）+ 未锁其它手势 + 位移达 slop，
|
||
* 判定横向主导（adx>ady）且左移（ddx<0）且起点落在可见行 → 进行左滑（只该行）。
|
||
* 与竖向滚动互斥：本分支锁 row_swipe_row 后下方 scroll 不再进入（gate 含
|
||
* row_swipe_row<0）；竖向主导（ady>adx）或不左移则回退既有滚动（改变不大：
|
||
* 以前「横主导左移」也滚，现改为行左滑，符合「横向主导→行左滑」）。 */
|
||
if (open_settled && td_ok && !scroll_drag && drag_slider == 0 && row_swipe_row < 0) {
|
||
int ddx = tlx - tdx, ddy = tly - tdy;
|
||
int adx = ddx < 0 ? -ddx : ddx, ady = ddy < 0 ? -ddy : ddy;
|
||
if ((adx >= NCP_SWIPE_SLOP || ady >= S_SCROLL_SLOP) && adx > ady && ddx < 0) {
|
||
int eff = tdy - NCP_LIST_TOP + list_scroll;
|
||
int row = mnp_row_at(eff, 0, g_nrows * NCP_ROW_H, NCP_ROW_H);
|
||
/* 起点必须在列表区（DND 带/底部提示等不在列表区，防 scroll 导致误匹行） */
|
||
if (tdy >= NCP_LIST_TOP && tdy < NCP_LIST_BOT &&
|
||
row >= 0 && row < g_nrows) {
|
||
row_swipe_row = row;
|
||
row_off = mnp_swipe_clamp(ddx, NCP_ROW_W);
|
||
row_settle = 0; row_off_target = 0;
|
||
row_anim_at = now_ms();
|
||
g_ncp_swipe_row = row; g_ncp_swipe_off = row_off;
|
||
row_paint = 1;
|
||
}
|
||
}
|
||
}
|
||
/* ⑦ 行左滑跟手：已进则更新 off（反向可回 → 回落至 0）；只该行生效。 */
|
||
if (row_swipe_row >= 0 && td_ok && !row_settle) {
|
||
row_off = mnp_swipe_clamp(tlx - tdx, NCP_ROW_W);
|
||
g_ncp_swipe_off = row_off;
|
||
row_paint = 1;
|
||
}
|
||
/* ⑨ 面板跟手拖动（进入）：竖向位移达 slop、起点不在列表溢出滚动区（归 §11）、
|
||
* 未锁行左滑/滚动/滑条 → 进入拖动。锁定当前面板露出高度 + 当前手指 y，
|
||
* 此后 reveal = seed + (tly - drag_y0)，方向无关、连续可反向（半程可回）。 */
|
||
if (td_ok && !drag_slider && !scroll_drag && row_swipe_row < 0 && !panel_drag) {
|
||
int ady2 = (tly - tdy) < 0 ? (tdy - tly) : (tly - tdy);
|
||
if (ady2 >= S_SCROLL_SLOP) {
|
||
int av = g_nrows * NCP_ROW_H;
|
||
int vw = NCP_LIST_BOT - NCP_LIST_TOP;
|
||
int in_over = (tdy >= NCP_LIST_TOP && tdy < NCP_LIST_BOT &&
|
||
mnp_scroll_max(av, vw) > 0);
|
||
if (!in_over) {
|
||
int cur_off = mnp_anim_off(anim_p, NCP_ANIM_FIX, g_ncp_ph);
|
||
drag_seed_reveal = (g_ncp_ph > 0) ? (g_ncp_ph + cur_off) : 0;
|
||
drag_y0 = tly;
|
||
panel_drag = 1;
|
||
}
|
||
}
|
||
}
|
||
/* ⑨ 跟手：panel_drag 时 reveal=seed+位移 → progress 更新 anim_p；拖动期时间轴暂停。 */
|
||
if (panel_drag && td_ok) {
|
||
int reveal = mnp_drag_reveal(drag_seed_reveal, tly - drag_y0, g_ncp_ph);
|
||
int np = mnp_drag_progress(reveal, NCP_ANIM_FIX, g_ncp_ph);
|
||
if (np != anim_p) { anim_p = np; drag_paint = 1; }
|
||
}
|
||
/* 列表滚动（§11）：面板就位（open_settled）+ 起点在列表区 + 内容溢出 +
|
||
* 纵向位移达 slop → 进滚动。方向遵循 input.swipe_invert（与设置页列表同式）；
|
||
* 拖到顶/底继续拖 → 回弹标记。动画进行中（面板在滑，未就位）不启动滚动。 */
|
||
if (open_settled && td_ok && !scroll_drag && drag_slider == 0 && row_swipe_row < 0) {
|
||
int ddy = tly - scroll_y0;
|
||
if (ddy >= S_SCROLL_SLOP || ddy <= -S_SCROLL_SLOP) {
|
||
int total = g_nrows * NCP_ROW_H;
|
||
int view = NCP_LIST_BOT - NCP_LIST_TOP;
|
||
if (mnp_scroll_max(total, view) > 0 &&
|
||
tdy >= NCP_LIST_TOP && tdy < NCP_LIST_BOT) {
|
||
scroll_drag = 1;
|
||
meow_settings_get_bool("input.swipe_invert", &scroll_invert);
|
||
scroll_base = mnp_scroll_base(list_scroll, ddy, scroll_invert);
|
||
scroll_rebound = 0;
|
||
}
|
||
}
|
||
}
|
||
if (scroll_drag && td_ok) {
|
||
int total = g_nrows * NCP_ROW_H;
|
||
int view = NCP_LIST_BOT - NCP_LIST_TOP;
|
||
int target = mnp_scroll_target(scroll_base, tly - scroll_y0, scroll_invert);
|
||
list_scroll = mnp_scroll_clamp(target, total, view);
|
||
scroll_rebound = mnp_scroll_rebound(target, mnp_scroll_max(total, view),
|
||
NCP_SCROLL_REBOUND_TOL);
|
||
list_paint = 1;
|
||
}
|
||
} else if (type == EV_KEY && code == BTN_TOUCH) {
|
||
if (val && !td) {
|
||
if (now_ms() < touch_cooldown_until) { tlx = tly = -1; }
|
||
else {
|
||
td = 1; td_ok = 0; tlx = -1; tly = -1; drag_slider = 0;
|
||
scroll_drag = 0; scroll_base = 0; scroll_y0 = 0;
|
||
scroll_invert = 0; scroll_rebound = 0;
|
||
/* ⑦ 新触摸：清行左滑（防上一手势残留） */
|
||
row_swipe_row = -1; row_off = 0; row_settle = 0;
|
||
row_off_target = 0; row_anim_at = 0; row_paint = 0;
|
||
g_ncp_swipe_row = -1; g_ncp_swipe_off = 0;
|
||
/* ⑨ 新触摸：清面板跟手（防上一拖动残留） */
|
||
panel_drag = 0; drag_seed_reveal = 0; drag_y0 = 0; drag_paint = 0;
|
||
}
|
||
} else if (!val && td) {
|
||
td = 0;
|
||
if (drag_slider) { /* 滑条拖动结束 → 落盘 */
|
||
ncp_slider_apply(drag_slider, tlx >= 0 ? tlx : tdx, 1);
|
||
drag_slider = 0; need_paint = 1;
|
||
} else if (td_ok) {
|
||
int dx = tlx - tdx, dy = tly - tdy;
|
||
int adx = dx < 0 ? -dx : dx, ady = dy < 0 ? -dy : dy;
|
||
/* 左缘左滑 = 关闭（复用全局左缘返回语义；动画中同样可打断）——
|
||
* 优先于列表滚动落定，保「左缘返回关」语义不受滚动影响 */
|
||
if (meow_edge_back(tdx, dx, dy)) {
|
||
if (anim_ok) anim_target = 0; else closed = 1;
|
||
break;
|
||
}
|
||
if (row_swipe_row >= 0) {
|
||
/* ⑦ 行左滑松手：过阈值 → 滑出删除；未过/反向 → 回弹复原（半程取消）。
|
||
* 只该行生效；本手势锁定后不再走 tap/上滑关闭/点空白，不关面板。 */
|
||
/* 用抬手最终位移兜底刷新 off（可能最后有位移但无 ABS 事件跟进）。 */
|
||
row_off = mnp_swipe_clamp(dx, NCP_ROW_W);
|
||
g_ncp_swipe_off = row_off;
|
||
if (mnp_swipe_delete(row_off, NCP_ROW_W,
|
||
NCP_SWIPE_DELETE_FRAC, NCP_SWIPE_DELETE_MIN)) {
|
||
row_off_target = -NCP_ROW_W; /* 滑出（删除）目标：整行移出 */
|
||
} else {
|
||
row_off_target = 0; /* 回弹复原 */
|
||
}
|
||
row_settle = 1; row_anim_at = now_ms();
|
||
} else if (scroll_drag) {
|
||
/* 列表滚动落定：最终 clamp 到边界（拖动中已实时跟手，此处确认终值）；
|
||
* 若回弹（拖到顶/底继续拖）→ 按「上滑/下滑关闭」收起（§11.3）。
|
||
* 绝不把「滑列表」误判成「上滑关闭」——scroll_drag 一旦置位即跳过
|
||
* 下方 mnp_vertical_up 关闭判定。 */
|
||
int total = g_nrows * NCP_ROW_H;
|
||
int view = NCP_LIST_BOT - NCP_LIST_TOP;
|
||
int target = mnp_scroll_target(scroll_base, tly - scroll_y0, scroll_invert);
|
||
list_scroll = mnp_scroll_clamp(target, total, view);
|
||
if (scroll_rebound) {
|
||
if (anim_ok) anim_target = 0; else closed = 1;
|
||
break;
|
||
}
|
||
list_paint = 1;
|
||
scroll_base = 0; scroll_y0 = 0; scroll_rebound = 0; scroll_invert = 0;
|
||
} else if (panel_drag) {
|
||
/* ⑨ 面板跟手拖动松手：按阈值锚定 target（≥40% → 补到展开；
|
||
* <40% 或反向拖回 → 回 0 收回 = 半程取消/关闭过阈值）。时间轴接管
|
||
* 把 anim_p 补到位；不误关面板、不走 tap/上滑/点空白（本手势锁定）。 */
|
||
int go_open = mnp_drag_anchor(anim_p, NCP_ANIM_FIX, NCP_DRAG_THR_PCT);
|
||
if (anim_ok) anim_target = go_open ? NCP_ANIM_FIX : 0;
|
||
else if (!go_open) closed = 1; /* 无快照降级：收回 → 直接退出 */
|
||
panel_drag = 0; drag_paint = 0; drag_seed_reveal = 0; drag_y0 = 0;
|
||
} else if (adx < 60 && ady < 60) { /* tap */
|
||
if (animating) break; /* 动画进行中：tap 忽略（控件命中会误触，见 §9.5） */
|
||
int tx = tdx, ty = tdy;
|
||
int hit = 0;
|
||
for (int c = 0; c < NCP_CHIP_COUNT; c++)
|
||
if (ncp_chip_hit(c, tx, ty)) {
|
||
int ar = ncp_chip_apply(c);
|
||
if (ar == 1) need_sb = 1; /* 主题变化 → 重刷状态栏 */
|
||
else if (ar == 2) {
|
||
after_modal = 1; /* 电源菜单已弹 → 整帧重绘还原 */
|
||
/* 电源菜单返回：菜单期间用户可能按电源确认/取消，键边沿可能错配，
|
||
* 同电源键长按路径（line 7480-7488）重 poll + 重采 m_prev_*，防误判「单击」→ 误切 panel。 */
|
||
memset(&kd_pwr, 0, sizeof kd_pwr);
|
||
memset(&kd_vold, 0, sizeof kd_vold);
|
||
memset(&kd_volu, 0, sizeof kd_volu);
|
||
memset(&kd_play, 0, sizeof kd_play);
|
||
kp_poll(&kp_power, NULL, NULL);
|
||
kp_poll(&kp_keys, NULL, NULL);
|
||
m_prev_pwr = kp_is_down(&kp_power, KEY_POWER);
|
||
m_prev_vold = kp_is_down(&kp_keys, KEY_VOLUMEDOWN);
|
||
m_prev_volu = kp_is_down(&kp_keys, KEY_VOLUMEUP);
|
||
m_prev_play = kp_is_down(&kp_keys, KEY_PLAYPAUSE);
|
||
/* 菜单期间用户的触摸经 evdev 广播也会进本 panel 的 tfd → 立即排空，
|
||
* 防返回后把「菜单里的点击」误判为 panel 内 tap/滑动。 */
|
||
if (tfd >= 0) {
|
||
unsigned char ev2[16];
|
||
while (read(tfd, ev2, sizeof ev2) == 16) {}
|
||
}
|
||
}
|
||
hit = 1; need_paint = 1; break;
|
||
}
|
||
if (!hit && ncp_slider_band(tx, ty, NCP_SL1_Y)) { hit = 1; if (ncp_slider_apply(1, tx, 1)) need_paint = 1; }
|
||
else if (!hit && ncp_slider_band(tx, ty, NCP_SL2_Y)) { hit = 1; if (ncp_slider_apply(2, tx, 1)) need_paint = 1; }
|
||
/* ⑥ 勿扰面板内开关（列表上方小 toggle）：tap 即切换（整带命中） */
|
||
if (!hit && ncp_dnd_hit(tx, ty)) {
|
||
int dv = 0; meow_settings_get_bool("notify.dnd", &dv);
|
||
meow_settings_set_bool("notify.dnd", dv ? 0 : 1);
|
||
meow_settings_save();
|
||
g_ncp_dnd = dv ? 0 : 1;
|
||
ncp_refresh_rows(); /* 按 dnd 过滤重采集 */
|
||
list_scroll = mnp_scroll_clamp(list_scroll, g_nrows * NCP_ROW_H,
|
||
NCP_LIST_BOT - NCP_LIST_TOP);
|
||
hit = 1; need_paint = 1;
|
||
}
|
||
/* ⑧ 一键清除（勿扰对称处右半段）：先转储留档 → 再清空显示（留 ongoing/media/progress）。 */
|
||
if (!hit && ncp_clear_hit(tx, ty)) {
|
||
int n = ncp_clear_all();
|
||
logmsg("notif-center: clear %d notif(s) (dumped first, kept ongo/media/progress)", n);
|
||
/* 清除后取消行左滑（下标会变），再重采集 + 重钳 + 整面板重画。 */
|
||
row_swipe_row = -1; row_off = 0; row_settle = 0;
|
||
row_off_target = 0; row_anim_at = 0; row_paint = 0;
|
||
g_ncp_swipe_row = -1; g_ncp_swipe_off = 0;
|
||
ncp_refresh_rows();
|
||
list_scroll = mnp_scroll_clamp(list_scroll, g_nrows * NCP_ROW_H,
|
||
NCP_LIST_BOT - NCP_LIST_TOP);
|
||
hit = 1; need_paint = 1;
|
||
}
|
||
if (!hit && ty >= NCP_LIST_TOP && ty < NCP_LIST_BOT) {
|
||
if (ncp_row_tap(tx, ty, list_scroll, want_launch)) {
|
||
hit = 1;
|
||
if (anim_ok) anim_target = 0; /* 点击通知：dismiss + 记录启动 → 滑出收回 */
|
||
else closed = 1;
|
||
break;
|
||
}
|
||
}
|
||
if (!hit) { /* 点空白（标题/把手/提示/分隔线/列表外）→ 关闭 */
|
||
if (anim_ok) anim_target = 0; else closed = 1;
|
||
break;
|
||
}
|
||
} else if (mnp_vertical_up(dx, dy, MENU_SWIPE_THRESH)) {
|
||
if (anim_ok) anim_target = 0; else closed = 1; /* 面板内上滑 → 关闭 */
|
||
break;
|
||
} else if (anim_ok && anim_target == 0 &&
|
||
mnp_top_swipe_down(tdx, tdy, dx, dy, SB_BAR_H, MENU_SWIPE_THRESH)) {
|
||
anim_target = NCP_ANIM_FIX; /* 收回途中顶部热区下滑 → 重新打开（平滑转向） */
|
||
}
|
||
/* 其余横滑/下滑忽略（不关闭不动作） */
|
||
}
|
||
td_ok = 0;
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
if (closed) break; /* 非动画兜底：上滑 / 点空白 / 左缘左滑 / 通知点击 → 关面板返回 run_menu */
|
||
|
||
/* 列表变化检测：~500ms 对比 count；变化重采集 + 重绘列表区 */
|
||
if (now - last_listchk >= 500) {
|
||
last_listchk = now;
|
||
meow_notif_tick();
|
||
if (ncp_rows_changed()) {
|
||
/* ⑦ 列表已变（新条/撤下/TTL）：取消当前行左滑，避免行下标错位。⑨ 同时取消面板跟手。 */
|
||
row_swipe_row = -1; row_off = 0; row_settle = 0;
|
||
row_off_target = 0; row_anim_at = 0; row_paint = 0;
|
||
g_ncp_swipe_row = -1; g_ncp_swipe_off = 0;
|
||
panel_drag = 0; drag_seed_reveal = 0; drag_y0 = 0; drag_paint = 0;
|
||
ncp_refresh_rows();
|
||
list_scroll = mnp_scroll_clamp(list_scroll, g_nrows * NCP_ROW_H,
|
||
NCP_LIST_BOT - NCP_LIST_TOP);
|
||
need_paint = 1;
|
||
}
|
||
}
|
||
|
||
/* 开关动画推进（§9：状态时间轴 + 快照 blit 平移；present 尊重 SDK 帧率门控，动画不更高频）。
|
||
* 每 tick 依壁钟差推进 p；改 anim_target 即平滑转向（可打断，不跳变）。 */
|
||
if (anim_ok && anim_p != anim_target && !panel_drag) {
|
||
unsigned long long anow = now_ms();
|
||
int dt;
|
||
if (anim_target != anim_last_target) {
|
||
/* 意图刚切换（打开↔关闭）：重置计时起点，本 tick 不计时，
|
||
* 避免稳态闲置后 anim_last 陈旧导致首帧就跳到目标（不产生动画）。 */
|
||
anim_last_target = anim_target;
|
||
anim_last = anow;
|
||
dt = 0;
|
||
} else {
|
||
dt = (int)((anow > anim_last) ? (anow - anim_last) : 0);
|
||
anim_last = anow;
|
||
}
|
||
int np = mnp_anim_step(anim_p, anim_target, NCP_ANIM_FIX,
|
||
(unsigned long long)dt, NCP_ANIM_MS);
|
||
if (np != anim_p) {
|
||
anim_p = np;
|
||
ncp_anim_frame(anim_p, &anim_prev_bot, anim_ok); /* §9 快照 blit 平移（只刷面板矩形） */
|
||
}
|
||
}
|
||
if (anim_ok && !panel_drag && !td && anim_target == 0 && anim_p == 0) break; /* 滑出到 0 且无按下触摸 → 真正退出子循环 */
|
||
|
||
/* ⑦ 行左滑落位动画：row_settle=1 时按壁钟差向 row_off_target 线性步进（回弹→0 / 滑出→-row_w）。
|
||
* 到达目标：0=回弹完成（行复原，无需重排）；-row_w=删除 → dismiss + 重采集 + 重排（need_paint）。
|
||
* 只该行生效；与面板开关动画（上块）互不干扰（行左滑仅在面板稳态 open_settled 下进行）。 */
|
||
if (row_swipe_row >= 0 && row_settle) {
|
||
unsigned long long rnow = now_ms();
|
||
int rdt = (int)((rnow > row_anim_at) ? (rnow - row_anim_at) : 0);
|
||
row_anim_at = rnow;
|
||
int noff = mnp_swipe_step(row_off, row_off_target, (unsigned long long)rdt, NCP_SWIPE_RATE);
|
||
if (noff != row_off) {
|
||
row_off = noff;
|
||
g_ncp_swipe_off = noff;
|
||
row_paint = 1;
|
||
}
|
||
if (noff == row_off_target) {
|
||
if (row_off_target == 0) {
|
||
/* 回弹复原完成：先把行重画回 0 位（清残留偏移），再清滑动态（无需重排）。 */
|
||
ncp_repaint_row(list_scroll, row_swipe_row, 0);
|
||
row_swipe_row = -1; row_settle = 0; row_off = 0;
|
||
row_off_target = 0; row_paint = 0;
|
||
g_ncp_swipe_row = -1; g_ncp_swipe_off = 0;
|
||
if (anim_ok) ncp_snap_panel(); /* 行已复原：刷新面板快照（供滑出动画用） */
|
||
} else {
|
||
/* 滑出删除完成：撤下该通知 + 重采集 + 重排列表（整面板重画）。 */
|
||
if (row_swipe_row >= 0 && row_swipe_row < g_nrows)
|
||
meow_notif_dismiss(g_rows[row_swipe_row].id);
|
||
row_swipe_row = -1; row_settle = 0; row_off = 0;
|
||
row_off_target = 0; row_paint = 0;
|
||
g_ncp_swipe_row = -1; g_ncp_swipe_off = 0;
|
||
ncp_refresh_rows();
|
||
list_scroll = mnp_scroll_clamp(list_scroll, g_nrows * NCP_ROW_H,
|
||
NCP_LIST_BOT - NCP_LIST_TOP);
|
||
need_paint = 1; /* 行已移除/重排：整面板（列表区）重画 */
|
||
}
|
||
}
|
||
}
|
||
|
||
/* 重绘（面板体区域；状态栏 0-27 由 draw_statusbar 单独维护，不落入此脏区）。
|
||
* need_sb=1（打开/主题变化）时 draw_notif_center 内另绘状态栏并标其脏——脏区仍
|
||
* 只含「面板体 + 28px 状态栏」两带，绝不整屏重绘。
|
||
* 动画进行中：不画稳态面板（会覆盖正在滑动的帧），need_paint 保持到到位后再补画。 */
|
||
if (need_paint) {
|
||
last_act = now;
|
||
if (!(anim_ok && anim_p != anim_target)) {
|
||
draw_notif_center(list_scroll, need_sb);
|
||
need_sb = 0;
|
||
if (anim_ok) ncp_snap_panel(); /* 面板内容已变：刷新快照（供滑出动画用） */
|
||
if (after_modal) { meow_dirty_full(); after_modal = 0; }
|
||
else meow_dirty_add(0, NCP_TOP, fb_xres, fb_yres - NCP_TOP);
|
||
meow_ui_flush();
|
||
need_paint = 0;
|
||
list_paint = 0; /* 整面板已含列表：滚动重绘标记随之清除 */
|
||
}
|
||
/* 否则动画进行中：保留 need_paint，到位后（下一稳态 tick）补画最终面板 */
|
||
}
|
||
/* 仅列表区重绘（滚动专用：只刷列表带，不整面板/不刷状态栏；同受动画门控，
|
||
* 动画进行中不画稳态，list_paint 保持到到位后再补画一次列表终值）。 */
|
||
if (list_paint) {
|
||
last_act = now;
|
||
if (!(anim_ok && anim_p != anim_target)) {
|
||
ncp_repaint_list(list_scroll);
|
||
if (anim_ok) ncp_snap_panel(); /* 列表已变：刷新面板快照（供滑出动画用） */
|
||
list_paint = 0;
|
||
}
|
||
}
|
||
/* ⑨ 面板跟手拖动重绘：只刷面板矩形 + 新露出条（§9 快照 blit 平移；不整屏/不重排控件）。
|
||
* 拖动期 anim_p 直接由手指映射，故不受下方「animating」门控（非时间轴推进），直接呈现。 */
|
||
if (drag_paint) {
|
||
last_act = now;
|
||
ncp_anim_frame(anim_p, &anim_prev_bot, anim_ok);
|
||
drag_paint = 0;
|
||
}
|
||
/* 仅重绘该行带（行左滑跟手/回弹/滑出专用：只刷该行矩形，不整面板/不刷状态栏；同受动画门控）。
|
||
* row_swipe_row<0（行已回弹/删除/被取消）则跳过并清标记，避免对已移除行重绘。 */
|
||
if (row_paint) {
|
||
last_act = now;
|
||
if (row_swipe_row >= 0 && !(anim_ok && anim_p != anim_target))
|
||
ncp_repaint_row(list_scroll, row_swipe_row, row_off);
|
||
row_paint = 0;
|
||
}
|
||
/* ~1s 状态栏时钟 */
|
||
if (now - last_tick >= 1000) {
|
||
last_tick = now;
|
||
draw_clock();
|
||
fb_norm_buf0();
|
||
meow_ui_flush();
|
||
}
|
||
usleep(POLL_MS * 1000);
|
||
}
|
||
if (tfd >= 0) close(tfd);
|
||
kp_close(&kp_power); kp_close(&kp_keys);
|
||
ncp_snap_free(); /* 释放动画快照（退出即回收，不驻留） */
|
||
ncp_rows_free();
|
||
logmsg("notification center closed");
|
||
}
|
||
|
||
/* Bring the panel up for the menu, but ONLY when it is actually dark:
|
||
* brightness 0 (the player's own screen-off/standby writes brightness 0
|
||
* then FBIOBLANK(4); on this device bl_power stays 0, so brightness==0 is
|
||
* the reliable indicator — keep the bl_power check as a belt-and-suspenders
|
||
* for other states). A normal brightness is left completely untouched so
|
||
* the menu never yanks the brightness up (Bug A).
|
||
*
|
||
* CRITICAL (2026-08-28 hotfix): we NEVER touch FBIOBLANK here — the panel
|
||
* blank state belongs to the player's display state machine. fb_open()
|
||
* already unblanks for the menu (the menu must be visible); forcibly
|
||
* unblanking while the player thinks the screen is blanked leaves the
|
||
* player's state machine inconsistent (it stops drawing, UI freezes —
|
||
* this is the Bug B keeper deadlock, do not reintroduce). */
|
||
static void ensure_backlight(void)
|
||
{
|
||
int cur = read_brightness();
|
||
int blp = read_file_int(BACKLIGHT_POWER);
|
||
if (cur > 0 && blp <= 0) {
|
||
logmsg("backlight: screen on (%d), leave untouched", cur);
|
||
return;
|
||
}
|
||
int target = (saved_brightness > 0) ? saved_brightness : 60;
|
||
logmsg("backlight off (cur=%d bl_power=%d) -> %d", cur, blp, target);
|
||
if (cur <= 0) write_brightness(target);
|
||
if (blp > 0) write_file(BACKLIGHT_POWER, "0\n");
|
||
}
|
||
|
||
/* Restore the backlight after the player resumes (app exit / SIGTERM).
|
||
* Minimal duty after the 2026-08-28 hotfix:
|
||
* - if the menu opened while the player had blanked the panel (screen
|
||
* timeout), re-blank it (brightness 0 + FBIOBLANK(4)) so the physical
|
||
* panel matches the player's display state machine — no frozen frame,
|
||
* and the player still owns the blank state;
|
||
* - otherwise only write brightness back when it reads 0, and never
|
||
* unblank (unblanking behind the player's back wedges its display state
|
||
* machine — see ensure_backlight). A normal brightness is left
|
||
* completely untouched (Bug A: no forced brightness raise). */
|
||
static void restore_backlight(void)
|
||
{
|
||
if (menu_opened_blank) {
|
||
logmsg("restore: panel was blanked at menu open, re-blank (0 + FBIOBLANK 4)");
|
||
write_brightness(0);
|
||
int fbfd = open(FB_DEV, O_RDWR);
|
||
if (fbfd >= 0) { ioctl(fbfd, FBIOBLANK, 4); close(fbfd); }
|
||
menu_opened_blank = 0;
|
||
return;
|
||
}
|
||
int cur = read_brightness();
|
||
int blp = read_file_int(BACKLIGHT_POWER);
|
||
if (cur <= 0 || blp > 0) {
|
||
int target = (saved_brightness > 0) ? saved_brightness : 60;
|
||
logmsg("restore backlight (cur=%d bl_power=%d) -> %d (saved=%d)",
|
||
cur, blp, target, saved_brightness);
|
||
if (cur <= 0) write_brightness(target);
|
||
if (blp > 0) write_file(BACKLIGHT_POWER, "0\n");
|
||
}
|
||
}
|
||
|
||
/* ================================================================== */
|
||
/* M2.12 MeowAPPs 包数据目录 + .mpk 接口 */
|
||
/* exFAT 无符号链接 → 数据目录用环境变量（MEOW_DATA_DIR/CACHE_DIR） */
|
||
/* 传址给应用，不做 symlink（APPS.md 附录 v2 修订）。 */
|
||
/* ================================================================== */
|
||
|
||
/* 由 exec 绝对路径取包名：/usr/data/mnt/sd_0/MeowAPPs/<pkg>/<binary> → <pkg> */
|
||
static int meow_pkg_name(const char *exec, char *out, int n)
|
||
{
|
||
if (!exec || strncmp(exec, MEOWAPPS, strlen(MEOWAPPS)) != 0) { if (n>0) out[0]=0; return -1; }
|
||
const char *p = exec + strlen(MEOWAPPS);
|
||
if (*p != '/') { if (n>0) out[0]=0; return -1; }
|
||
p++;
|
||
const char *end = strchr(p, '/');
|
||
int len = end ? (int)(end - p) : (int)strlen(p);
|
||
if (len <= 0 || len >= n) { if (n>0) out[0]=0; return -1; }
|
||
memcpy(out, p, len); out[len] = 0;
|
||
return 0;
|
||
}
|
||
|
||
/* 启动应用前准备数据目录：建 MeowData/<pkg>/{data,cache}（如缺）。幂等。
|
||
* 失败只 log（MeowData 所在卡不存在/只读），绝不崩 —— 零卡依赖：应用需按
|
||
* APPS.md 规范容忍无数据目录。返回 0=就绪，-1=pkg 不在卡上/不能判名。 */
|
||
static int meow_app_prepare(const char *exec)
|
||
{
|
||
char pkg[64];
|
||
if (meow_pkg_name(exec, pkg, sizeof pkg) != 0) return -1;
|
||
if (!sd_device_present()) return -1; /* 卡不在，跳过（应用仍可跑非卡资源） */
|
||
char cmd[320];
|
||
snprintf(cmd, sizeof cmd, "mkdir -p '/usr/data/mnt/sd_0/MeowData/%s/data' "
|
||
"'/usr/data/mnt/sd_0/MeowData/%s/cache' 2>/dev/null", pkg, pkg);
|
||
int rc = system(cmd);
|
||
logmsg("app_prepare: pkg=%s rc=%d", pkg, rc);
|
||
return rc == 0 ? 0 : -1;
|
||
}
|
||
|
||
/* .mpk 安装（本期接口/CLI + 文档；UI 后期）：解压 .mpk → MeowAPPs/<pkg>/。
|
||
* 约定 .mpk = tar.gz，顶层即包目录（含 app.json）；包名 = 文件名茎 <pkg>.mpk。
|
||
* 同名先备份；解压后校验 app.json；随后数据 init（MeowData/<pkg>/{data,cache}）。
|
||
* 返回 0 ok / 负=错误。 */
|
||
static int meow_pkg_install(const char *mpk_path)
|
||
{
|
||
if (!mpk_path || access(mpk_path, R_OK) != 0) { logmsg("pkg_install: bad mpk %s", mpk_path?mpk_path:"(null)"); return -1; }
|
||
if (!sd_device_present()) { logmsg("pkg_install: no card"); return -1; }
|
||
if (strpbrk(mpk_path, " ;`$'\"&|<>") != NULL) { logmsg("pkg_install: unsafe path"); return -2; }
|
||
/* 包名 = 文件名茎（去掉 .mpk） */
|
||
const char *bn = strrchr(mpk_path, '/');
|
||
bn = bn ? bn + 1 : mpk_path;
|
||
const char *dot = strrchr(bn, '.');
|
||
char pkg[64];
|
||
if (!dot || strcmp(dot, ".mpk") != 0) { logmsg("pkg_install: need <pkg>.mpk"); return -1; }
|
||
int len = (int)(dot - bn);
|
||
if (len <= 0 || len >= (int)sizeof pkg) { logmsg("pkg_install: bad pkg name"); return -1; }
|
||
memcpy(pkg, bn, len); pkg[len] = 0;
|
||
/* 目标 MeowAPPs/<pkg>/；同名先备份（.bak_<pid>），再解压，再校验 app.json */
|
||
char dst[256], bak[256], cmd[700];
|
||
snprintf(dst, sizeof dst, "/usr/data/mnt/sd_0/MeowAPPs/%s", pkg);
|
||
snprintf(bak, sizeof bak, "%s.bak_%d", dst, (int)getpid());
|
||
/* BusyBox tar 无 -z：用 gzip -dc | tar -x 处理 tar.gz。 */
|
||
snprintf(cmd, sizeof cmd,
|
||
"rm -rf '%s' 2>/dev/null; "
|
||
"[ -d '%s' ] && mv '%s' '%s' 2>/dev/null; "
|
||
"mkdir -p '%s' && gzip -dc '%s' | tar -x -C '%s' 2>/dev/null && "
|
||
"[ -f '%s/app.json' ]", bak, dst, dst, bak, dst, mpk_path, dst, dst);
|
||
if (system(cmd) != 0) { logmsg("pkg_install: extract/validate fail for %s", pkg); return -1; }
|
||
/* 数据 init：MeowData/<pkg>/{data,cache} */
|
||
snprintf(cmd, sizeof cmd, "mkdir -p '/usr/data/mnt/sd_0/MeowData/%s/data' "
|
||
"'/usr/data/mnt/sd_0/MeowData/%s/cache' 2>/dev/null", pkg, pkg);
|
||
system(cmd);
|
||
logmsg("pkg_install: %s installed (old backed up %s)", pkg, bak);
|
||
return 0;
|
||
}
|
||
|
||
/* .mpk 导出：打包 MeowAPPs/<pkg>/（数据目录本就由 env 指向 MeowData，MeowAPPs/<pkg> 下无
|
||
* data/cache 实体，直接全打包）→ <pkg>.mpk。返回 0 ok。 */
|
||
static int meow_pkg_export(const char *pkg, const char *out_path)
|
||
{
|
||
if (!pkg || !out_path || strpbrk(pkg, " ;`$'\"&|<>/" ) || strpbrk(out_path, " ;`$'\"&|<>")) {
|
||
logmsg("pkg_export: unsafe path"); return -2;
|
||
}
|
||
if (!sd_mounted()) { logmsg("pkg_export: card not mounted"); return -1; }
|
||
char src[256], dst[256];
|
||
snprintf(src, sizeof src, "/usr/data/mnt/sd_0/MeowAPPs/%s", pkg);
|
||
if (access(src, R_OK) != 0) { logmsg("pkg_export: no such pkg"); return -1; }
|
||
snprintf(dst, sizeof dst, "%s", out_path);
|
||
/* BusyBox tar 无 -z：tar -c | gzip -c > out（先写 .tmp 再 mv，防半成品）。 */
|
||
char cmd[512];
|
||
snprintf(cmd, sizeof cmd, "tar -c -C '%s' . | gzip -c > '%s.tmp' 2>/dev/null && "
|
||
"mv '%s.tmp' '%s'", src, dst, dst, dst);
|
||
if (system(cmd) != 0) { logmsg("pkg_export: tar/gzip fail"); return -1; }
|
||
logmsg("pkg_export: %s -> %s", pkg, dst);
|
||
return 0;
|
||
}
|
||
|
||
/* ================================================================== */
|
||
/* 阶段 D · M0：AF_UNIX IPC 骨架 */
|
||
/* IPC 线程只读帧+解析+入队（SPSC 无锁环 + eventfd 唤醒主循环）； */
|
||
/* 主循环 meow_ipc_process() 单写者改状态并回 ACK/ERR/RESULT。 */
|
||
/* 遵守 FRAMEWORK_DESIGN §1/§6：主循环 10ms 热键轮询绝不被 socket IO 阻塞。 */
|
||
/* ================================================================== */
|
||
#define MEOW_IPC_RING 16 /* 无锁环深度（单生产者=IPC线程，单消费者=主循环） */
|
||
#define MEOW_IPC_CONNS 10 /* 同时接入连接上限（backlog 4 + 余量） */
|
||
#define MEOW_IPC_BACKLOG 4
|
||
|
||
/* 入队消息：类型 + 请求 id + 客户端 fd（回包用）+ 负载拷贝（≤CARGO） */
|
||
struct meow_ipc_msg {
|
||
uint16_t type;
|
||
uint16_t plen;
|
||
uint32_t req_id;
|
||
int fd;
|
||
uint8_t payload[MEOW_IPC_CARGO];
|
||
};
|
||
|
||
static struct meow_ipc_msg ipc_ring[MEOW_IPC_RING];
|
||
static volatile uint32_t ipc_head = 0; /* 消费端（主循环）推进 */
|
||
static volatile uint32_t ipc_tail = 0; /* 生产端（IPC线程）推进 */
|
||
static void ipc_dispatch(struct meow_ipc_msg *m); /* 定义在下方，主循环排空用 */
|
||
static int ipc_event_fd = -1;
|
||
static volatile int ipc_shutdown = 0;
|
||
static volatile int ipc_thread_ok = 0; /* bind+listen 成功 */
|
||
static char ipc_sock_path[MEOW_IPC_SOCK_LEN] = MEOW_IPC_PATH;
|
||
static pthread_t ipc_pthread;
|
||
|
||
/* 每连接字节流帧组装状态（TCP 流语义下逐字节缓冲，跨 poll 保留） */
|
||
struct meow_ipc_conn {
|
||
int fd;
|
||
uint8_t hdr[MEOW_IPC_HDR_LEN];
|
||
int hdr_n;
|
||
uint8_t pay[MEOW_IPC_MAX];
|
||
uint32_t pay_tot;
|
||
uint32_t pay_n;
|
||
};
|
||
static struct meow_ipc_conn ipc_conns[MEOW_IPC_CONNS];
|
||
|
||
/* 写一帧（16B 头 + 负载）。返回写入字节；<=0 视为失败。 */
|
||
static size_t ipc_send(int fd, uint16_t type, uint32_t req_id,
|
||
const void *payload, uint32_t len)
|
||
{
|
||
if (fd < 0) return 0;
|
||
uint8_t hdr[MEOW_IPC_HDR_LEN];
|
||
uint32_t magic = MEOW_IPC_MAGIC;
|
||
uint16_t ver = MEOW_IPC_VERSION;
|
||
memcpy(hdr + 0, &magic, 4);
|
||
memcpy(hdr + 4, &ver, 2);
|
||
memcpy(hdr + 6, &type, 2);
|
||
memcpy(hdr + 8, &req_id, 4);
|
||
memcpy(hdr + 12, &len, 4);
|
||
size_t off = 0;
|
||
while (off < sizeof hdr) {
|
||
ssize_t w = write(fd, hdr + off, sizeof hdr - off);
|
||
if (w <= 0) return off;
|
||
off += (size_t)w;
|
||
}
|
||
if (len && payload) {
|
||
size_t p = 0;
|
||
while (p < len) {
|
||
ssize_t w = write(fd, (const uint8_t *)payload + p, len - p);
|
||
if (w <= 0) break;
|
||
p += (size_t)w;
|
||
}
|
||
off += p;
|
||
}
|
||
return off;
|
||
}
|
||
|
||
/* 组装完的帧入队（SPSC 无锁，先写槽再推进 tail，__sync 发布）。 */
|
||
static void ipc_enqueue_frame(struct meow_ipc_conn *c)
|
||
{
|
||
uint16_t type;
|
||
uint32_t req_id, len;
|
||
memcpy(&type, c->hdr + 6, 2);
|
||
memcpy(&req_id, c->hdr + 8, 4);
|
||
len = c->pay_tot;
|
||
if ((ipc_tail - ipc_head) >= MEOW_IPC_RING) {
|
||
logmsg("ipc: ring full, drop frame type=0x%04x", type);
|
||
return;
|
||
}
|
||
uint32_t slot = ipc_tail % MEOW_IPC_RING;
|
||
struct meow_ipc_msg *m = &ipc_ring[slot];
|
||
m->type = type;
|
||
m->req_id = req_id;
|
||
m->fd = c->fd;
|
||
uint32_t copy = len < MEOW_IPC_CARGO ? len : MEOW_IPC_CARGO;
|
||
m->plen = (uint16_t)copy;
|
||
memcpy(m->payload, c->pay, copy);
|
||
__sync_synchronize();
|
||
ipc_tail++;
|
||
if (ipc_event_fd >= 0) { uint64_t one = 1; (void)write(ipc_event_fd, &one, sizeof one); }
|
||
}
|
||
|
||
/* 读一个连接的可用字节并组装成帧（>=1 完整帧即入队）。返回 0=ok（可能已入队），
|
||
* -1=连接关闭/坏帧（调用方应关闭并回收）。 */
|
||
static int ipc_conn_read(struct meow_ipc_conn *c)
|
||
{
|
||
for (;;) {
|
||
if (c->hdr_n < MEOW_IPC_HDR_LEN) {
|
||
ssize_t r = read(c->fd, c->hdr + c->hdr_n, MEOW_IPC_HDR_LEN - c->hdr_n);
|
||
if (r < 0) { if (errno == EAGAIN) return 0; return -1; }
|
||
if (r == 0) return -1;
|
||
c->hdr_n += (int)r;
|
||
if (c->hdr_n < MEOW_IPC_HDR_LEN) return 0;
|
||
uint32_t magic, len;
|
||
uint16_t ver;
|
||
memcpy(&magic, c->hdr, 4);
|
||
memcpy(&ver, c->hdr + 4, 2);
|
||
memcpy(&len, c->hdr + 12, 4);
|
||
if (magic != MEOW_IPC_MAGIC) { logmsg("ipc: bad magic %08x", magic); return -1; }
|
||
if (ver != MEOW_IPC_VERSION) { logmsg("ipc: bad version %u", ver); return -1; }
|
||
if (len > MEOW_IPC_MAX) { logmsg("ipc: frame len %u too long", len); return -1; }
|
||
c->pay_tot = len;
|
||
c->pay_n = 0;
|
||
if (len == 0) {
|
||
ipc_enqueue_frame(c);
|
||
c->hdr_n = 0;
|
||
continue;
|
||
}
|
||
}
|
||
if (c->pay_n < c->pay_tot) {
|
||
ssize_t r = read(c->fd, c->pay + c->pay_n, c->pay_tot - c->pay_n);
|
||
if (r < 0) { if (errno == EAGAIN) return 0; return -1; }
|
||
if (r == 0) return -1;
|
||
c->pay_n += (uint32_t)r;
|
||
if (c->pay_n < c->pay_tot) return 0;
|
||
}
|
||
ipc_enqueue_frame(c);
|
||
c->hdr_n = 0;
|
||
c->pay_n = 0;
|
||
}
|
||
}
|
||
|
||
static void *ipc_thread(void *arg)
|
||
{
|
||
(void)arg;
|
||
int lfd = socket(AF_UNIX, SOCK_STREAM, 0);
|
||
if (lfd < 0) { logmsg("ipc: socket() fail %s", strerror(errno)); return NULL; }
|
||
unlink(ipc_sock_path);
|
||
struct sockaddr_un a;
|
||
memset(&a, 0, sizeof a);
|
||
a.sun_family = AF_UNIX;
|
||
strncpy(a.sun_path, ipc_sock_path, sizeof a.sun_path - 1);
|
||
if (bind(lfd, (struct sockaddr *)&a, sizeof a) < 0) {
|
||
logmsg("ipc: bind %s fail %s", ipc_sock_path, strerror(errno));
|
||
close(lfd);
|
||
return NULL;
|
||
}
|
||
chmod(ipc_sock_path, 0666);
|
||
if (listen(lfd, MEOW_IPC_BACKLOG) < 0) {
|
||
logmsg("ipc: listen fail %s", strerror(errno));
|
||
close(lfd);
|
||
return NULL;
|
||
}
|
||
fcntl(lfd, F_SETFL, O_NONBLOCK);
|
||
ipc_thread_ok = 1;
|
||
logmsg("ipc: listening on %s (backlog %d)", ipc_sock_path, MEOW_IPC_BACKLOG);
|
||
|
||
struct pollfd fds[MEOW_IPC_CONNS + 1];
|
||
int nfds = 1;
|
||
fds[0].fd = lfd; fds[0].events = POLLIN; fds[0].revents = 0;
|
||
while (!ipc_shutdown) {
|
||
int r = poll(fds, nfds, 400);
|
||
if (r < 0) { if (errno == EINTR) continue; break; }
|
||
if (r == 0) continue;
|
||
if (fds[0].revents & POLLIN) {
|
||
for (;;) {
|
||
int c = accept(lfd, NULL, NULL);
|
||
if (c < 0) break;
|
||
fcntl(c, F_SETFL, O_NONBLOCK);
|
||
if (nfds <= MEOW_IPC_CONNS) {
|
||
ipc_conns[nfds - 1].fd = c;
|
||
ipc_conns[nfds - 1].hdr_n = 0;
|
||
ipc_conns[nfds - 1].pay_n = 0;
|
||
ipc_conns[nfds - 1].pay_tot = 0;
|
||
fds[nfds].fd = c;
|
||
fds[nfds].events = POLLIN;
|
||
fds[nfds].revents = 0;
|
||
nfds++;
|
||
logmsg("ipc: conn %d accept (nfds=%d)", c, nfds - 1);
|
||
} else {
|
||
close(c);
|
||
logmsg("ipc: conn %d rejected (full)", c);
|
||
}
|
||
}
|
||
}
|
||
int i = 1;
|
||
while (i < nfds) {
|
||
int ev = fds[i].revents;
|
||
if (ev & (POLLIN | POLLHUP | POLLERR | POLLNVAL)) {
|
||
struct meow_ipc_conn *cc = &ipc_conns[i - 1];
|
||
if (ipc_conn_read(cc) < 0) {
|
||
logmsg("ipc: conn %d closed", cc->fd);
|
||
close(cc->fd);
|
||
for (int j = i; j < nfds - 1; j++) {
|
||
fds[j] = fds[j + 1];
|
||
ipc_conns[j - 1] = ipc_conns[j];
|
||
}
|
||
nfds--;
|
||
continue;
|
||
}
|
||
}
|
||
i++;
|
||
}
|
||
for (int j = 0; j < nfds; j++) fds[j].revents = 0;
|
||
}
|
||
for (int i = 1; i < nfds; i++) close(fds[i].fd);
|
||
close(lfd);
|
||
unlink(ipc_sock_path);
|
||
logmsg("ipc: thread exit");
|
||
return NULL;
|
||
}
|
||
|
||
/* 启动 IPC 线程（主循环任意时刻调一次）。返回 0=就绪，-1=线程创建失败。
|
||
* （bind/listen 失败记 ipc_thread_ok=0，随后 meow_ipc_process 仍安全轮询空队列。） */
|
||
static int meow_ipc_init(void)
|
||
{
|
||
ipc_event_fd = eventfd(0, EFD_NONBLOCK);
|
||
if (ipc_event_fd < 0)
|
||
logmsg("ipc: eventfd fail %s (10ms poll drains anyway)", strerror(errno));
|
||
if (pthread_create(&ipc_pthread, NULL, ipc_thread, NULL) != 0) {
|
||
logmsg("ipc: pthread_create fail");
|
||
return -1;
|
||
}
|
||
usleep(60000); /* 给 bind+listen 一点时间，log 就绪状态 */
|
||
if (ipc_thread_ok) logmsg("ipc: ready (eventfd=%d)", ipc_event_fd);
|
||
else logmsg("ipc: NOT ready (bind/listen failed, thread exiting)");
|
||
return ipc_thread_ok ? 0 : -1;
|
||
}
|
||
|
||
/* 主循环：非阻塞排空 eventfd + 处理入队帧（单写者改状态并回包）。
|
||
* 事件fd 仅为低延迟优化；若为 -1，10ms 轮询仍保证每圈排空。 */
|
||
static void meow_ipc_process(void)
|
||
{
|
||
if (ipc_event_fd >= 0) {
|
||
uint64_t v;
|
||
while (read(ipc_event_fd, &v, sizeof v) == (ssize_t)sizeof v) {}
|
||
}
|
||
while (ipc_head != ipc_tail) {
|
||
struct meow_ipc_msg *m = &ipc_ring[ipc_head % MEOW_IPC_RING];
|
||
ipc_dispatch(m);
|
||
ipc_head++;
|
||
}
|
||
__sync_synchronize();
|
||
}
|
||
|
||
/* 处理一条入队帧：HELLO→ACK、ACT_QUERY→ACT_RESULT/ERR、ACT_DECLARE→ACK、其他→ERR。 */
|
||
static void ipc_dispatch(struct meow_ipc_msg *m)
|
||
{
|
||
switch (m->type) {
|
||
case MSG_HELLO: {
|
||
m_hello_t h;
|
||
memset(&h, 0, sizeof h);
|
||
memcpy(&h, m->payload, m->plen < (uint16_t)sizeof h ? m->plen : (uint16_t)sizeof h);
|
||
h.app_id[MEOW_APP_ID_MAX - 1] = 0;
|
||
meow_acct_hello(h.app_id, h.version, h.flags);
|
||
m_ack_t a;
|
||
a.code = MEOW_OK;
|
||
a.status = (uint32_t)g_naccts;
|
||
ipc_send(m->fd, MSG_ACK, m->req_id, &a, sizeof a);
|
||
logmsg("ipc: HELLO app=%s ver=%u -> ACK naccts=%d", h.app_id, h.version, g_naccts);
|
||
break;
|
||
}
|
||
case MSG_ACT_DECLARE: {
|
||
m_act_declare_t d;
|
||
memset(&d, 0, sizeof d);
|
||
memcpy(&d, m->payload, m->plen < (uint16_t)sizeof d ? m->plen : (uint16_t)sizeof d);
|
||
d.app_id[MEOW_APP_ID_MAX - 1] = 0;
|
||
meow_acct_declare(d.app_id, d.entries, d.count);
|
||
m_ack_t a;
|
||
a.code = MEOW_OK;
|
||
a.status = (uint32_t)g_naccts;
|
||
ipc_send(m->fd, MSG_ACK, m->req_id, &a, sizeof a);
|
||
logmsg("ipc: ACT_DECLARE app=%s n=%u -> ACK", d.app_id, d.count);
|
||
break;
|
||
}
|
||
case MSG_ACT_QUERY: {
|
||
m_act_query_t q;
|
||
memset(&q, 0, sizeof q);
|
||
memcpy(&q, m->payload, m->plen < (uint16_t)sizeof q ? m->plen : (uint16_t)sizeof q);
|
||
q.app_id[MEOW_APP_ID_MAX - 1] = 0;
|
||
q.activity[MEOW_ACT_MAX - 1] = 0;
|
||
char chain[MEOW_CHAIN_MAX] = "";
|
||
int depth = 0;
|
||
int code = resolve_chain(q.app_id, q.activity, chain, &depth);
|
||
if (code == MEOW_OK) {
|
||
m_act_result_t r;
|
||
memset(&r, 0, sizeof r);
|
||
r.depth = (uint32_t)depth;
|
||
r.code = MEOW_OK;
|
||
size_t cl = strlen(chain);
|
||
if (cl >= MEOW_CHAIN_MAX) cl = MEOW_CHAIN_MAX - 1;
|
||
memcpy(r.chain, chain, cl);
|
||
r.chain_len = (uint16_t)cl;
|
||
ipc_send(m->fd, MSG_ACT_RESULT, m->req_id, &r, sizeof r);
|
||
logmsg("ipc: ACT_QUERY app=%s act=%s -> depth=%d chain=%s",
|
||
q.app_id, q.activity, depth, chain);
|
||
} else {
|
||
m_err_t e;
|
||
memset(&e, 0, sizeof e);
|
||
e.code = (uint32_t)code;
|
||
const char *msg = (code == MEOW_ERR_NOENT) ? "unregistered app/activity"
|
||
: "resolve failed";
|
||
e.msg_len = (uint16_t)strlen(msg);
|
||
memcpy(e.msg, msg, e.msg_len);
|
||
ipc_send(m->fd, MSG_ERR, m->req_id, &e, sizeof e);
|
||
logmsg("ipc: ACT_QUERY app=%s act=%s -> ERR(0x%x)",
|
||
q.app_id, q.activity, code);
|
||
}
|
||
break;
|
||
}
|
||
case MSG_ACT_FOCUS: {
|
||
m_act_focus_t f;
|
||
memset(&f, 0, sizeof f);
|
||
memcpy(&f, m->payload, m->plen < (uint16_t)sizeof f ? m->plen : (uint16_t)sizeof f);
|
||
f.app_id[MEOW_APP_ID_MAX - 1] = 0;
|
||
f.activity[MEOW_ACT_MAX - 1] = 0;
|
||
meow_fg_act_set(f.app_id, f.activity); /* M2.17：当前顶层 activity（keep_awake 判定） */
|
||
m_ack_t a;
|
||
a.code = MEOW_OK;
|
||
a.status = (uint32_t)g_naccts;
|
||
ipc_send(m->fd, MSG_ACK, m->req_id, &a, sizeof a);
|
||
logmsg("ipc: ACT_FOCUS app=%s act=%s -> ACK", f.app_id, f.activity);
|
||
break;
|
||
}
|
||
case MSG_ACT_BACK: {
|
||
meow_fg_act_back(); /* 回到根/无 activity：清 keep_awake */
|
||
m_ack_t a;
|
||
a.code = MEOW_OK;
|
||
a.status = (uint32_t)g_naccts;
|
||
ipc_send(m->fd, MSG_ACK, m->req_id, &a, sizeof a);
|
||
logmsg("ipc: ACT_BACK -> ACK");
|
||
break;
|
||
}
|
||
/* M2a：通知存储（NOTIFICATION_SYSTEM.md §4/§7/§8）。IPC 线程只入队，此处在主循环
|
||
* 单写者落存储 + 回 ACK（与 HELLO/QUERY 同一线程模型，绝不在 socket IO 阻塞）。 */
|
||
case MSG_NOTIFY: {
|
||
m_notify_t mn;
|
||
memset(&mn, 0, sizeof mn);
|
||
memcpy(&mn, m->payload, m->plen < (uint16_t)sizeof mn ? m->plen : (uint16_t)sizeof mn);
|
||
mn.app_id[MEOW_APP_ID_MAX - 1] = 0;
|
||
mn.category[23] = 0;
|
||
mn.summary[63] = 0;
|
||
mn.body[95] = 0;
|
||
mn.app_icon[47] = 0;
|
||
mn.target_activity[MEOW_ACT_MAX - 1] = 0;
|
||
/* 映射到存储结构（freedesktop + MeowOS 扩展；actions/hints v1 空） */
|
||
meow_notif_t n;
|
||
memset(&n, 0, sizeof n);
|
||
n.id = mn.replaces_id; /* replaces_id==0 => 新建；>0 => 替换（不存在则新建） */
|
||
snprintf(n.app_id, sizeof n.app_id, "%s", mn.app_id);
|
||
snprintf(n.category, sizeof n.category, "%s", mn.category);
|
||
snprintf(n.summary, sizeof n.summary, "%s", mn.summary);
|
||
snprintf(n.body, sizeof n.body, "%s", mn.body);
|
||
snprintf(n.app_icon, sizeof n.app_icon, "%s", mn.app_icon);
|
||
snprintf(n.target_activity, sizeof n.target_activity, "%s", mn.target_activity);
|
||
n.expire_timeout = mn.expire_timeout;
|
||
n.progress = mn.progress;
|
||
n.urgency = mn.urgency; /* 0-3（低/普通/高/紧急）；旧调用=0 → LOW（静默），新调用缺省 NORMAL */
|
||
n.ongoing = mn.ongoing;
|
||
n.media = mn.media;
|
||
uint32_t nid = 0;
|
||
int rc = meow_notif_post(&n, &nid);
|
||
m_ack_t a;
|
||
a.code = (rc == NOTIF_OK) ? MEOW_OK : (uint32_t)rc;
|
||
a.status = nid; /* 返回分配/更新的通知 id */
|
||
ipc_send(m->fd, MSG_NOTIFY_ACK, m->req_id, &a, sizeof a);
|
||
logmsg("ipc: NOTIFY app=%s cat=%s id=%u rc=%d -> ACK", mn.app_id, mn.category, nid, rc);
|
||
break;
|
||
}
|
||
case MSG_NOTIFY_DISMISS: {
|
||
uint32_t id = 0;
|
||
if (m->plen >= 4) memcpy(&id, m->payload, 4);
|
||
int rc = meow_notif_dismiss(id);
|
||
m_ack_t a;
|
||
a.code = (rc == NOTIF_OK) ? MEOW_OK : (uint32_t)rc;
|
||
a.status = 0;
|
||
ipc_send(m->fd, MSG_ACK, m->req_id, &a, sizeof a);
|
||
logmsg("ipc: NOTIFY_DISMISS id=%u rc=%d -> ACK", id, rc);
|
||
break;
|
||
}
|
||
case MSG_NOTIFY_PROGRESS: {
|
||
m_notify_progress_t p;
|
||
memset(&p, 0, sizeof p);
|
||
memcpy(&p, m->payload, m->plen < (uint16_t)sizeof p ? m->plen : (uint16_t)sizeof p);
|
||
/* 实时进度：仅改 launcher 内存活跃槽（不落盘）；progress>=100 视为结束 → 里程碑落盘 */
|
||
int rc = meow_notif_update_progress(p.nid, p.progress);
|
||
m_ack_t a;
|
||
a.code = (rc == NOTIF_OK) ? MEOW_OK : (uint32_t)rc;
|
||
a.status = 0;
|
||
ipc_send(m->fd, MSG_ACK, m->req_id, &a, sizeof a);
|
||
logmsg("ipc: NOTIFY_PROGRESS nid=%u p=%d rc=%d -> ACK", p.nid, p.progress, rc);
|
||
break;
|
||
}
|
||
case MSG_NOTIFY_LIST:
|
||
/* ↓ 守护→App 下发通知清单（重同步）。本帧不来自客户端（无请求类型），故不在此应答；
|
||
* 需用时由守护主动经 meow_notif_serialize_list() + ipc_send 下发（M5 通知中心接入）。 */
|
||
logmsg("ipc: NOTIFY_LIST (downlink) not dispatched here");
|
||
break;
|
||
default:
|
||
logmsg("ipc: unsupported frame type 0x%04x (req %u)", m->type, m->req_id);
|
||
{
|
||
m_err_t e;
|
||
memset(&e, 0, sizeof e);
|
||
e.code = MEOW_ERR_INVAL;
|
||
char msg[40];
|
||
snprintf(msg, sizeof msg, "unsupported type 0x%04x", m->type);
|
||
e.msg_len = (uint16_t)strlen(msg);
|
||
memcpy(e.msg, msg, e.msg_len);
|
||
ipc_send(m->fd, MSG_ERR, m->req_id, &e, sizeof e);
|
||
}
|
||
break;
|
||
}
|
||
}
|
||
|
||
/* returns 0 on success (app ran and exited), -1 on launch failure */
|
||
/* GESTURE_BACK §2.4：把 app.json 的 immersive 声明写进 /tmp/meowapp_state，
|
||
* watchdog 据此决定是否画虚拟返回键 / 走 immersive 手势（watchdog 每 100ms 读一次）。
|
||
* immersive=1→"1"；0→"0"；<0→清空（应用退出，恢复默认非沉浸）。 */
|
||
static void meow_write_app_state(int immersive)
|
||
{
|
||
if (immersive < 0) { unlink("/tmp/meowapp_state"); return; }
|
||
int fd = open("/tmp/meowapp_state", O_WRONLY | O_CREAT | O_TRUNC, 0644);
|
||
if (fd < 0) return;
|
||
if (write(fd, immersive ? "1" : "0", 1) < 0) { /* ignore write error */ }
|
||
close(fd);
|
||
}
|
||
|
||
static int launch_app(struct app *a);
|
||
/* (definition follows) */
|
||
|
||
static int launch_app(struct app *a)
|
||
{
|
||
logmsg("launch: %s (%s)", a->name, a->exec);
|
||
if (!a->ok) { logmsg("launch blocked: exec not ok"); return -1; }
|
||
|
||
/* M2.12：启动前准备 MeowData/<pkg>/{data,cache}（幂等；卡不在/失败只 log 不崩）。
|
||
* 应用经环境变量 MEOW_DATA_DIR/MEOW_CACHE_DIR 定位数据（exFAT 无 symlink）。 */
|
||
meow_app_prepare(a->exec);
|
||
|
||
/* save the brightness the player had before the menu/app session, then
|
||
* drain input queues so the app starts clean */
|
||
saved_brightness = read_brightness();
|
||
if (saved_brightness <= 0) saved_brightness = 60; /* standby/unknown */
|
||
logmsg("saved brightness = %d", saved_brightness);
|
||
drain_input();
|
||
|
||
/* Bug 3: distinguish a REAL exec failure from a clean app exit. The child
|
||
* holds the write end of a CLOEXEC pipe; if execve() fails it writes the
|
||
* errno and _exit(127), if it succeeds the fd closes on exec so the parent
|
||
* read() returns EOF. Parent blocks on read() until the child either execs
|
||
* (success) or reports the error (failure); only then do we spawn the
|
||
* watchdog and waitpid — so an exec failure never leaves an orphan watchdog
|
||
* and never masquerades as "app ran and exited". */
|
||
int execpipe[2];
|
||
if (pipe(execpipe) < 0) { logmsg("exec pipe failed: %s", strerror(errno)); return -1; }
|
||
fcntl(execpipe[1], F_SETFD, FD_CLOEXEC);
|
||
|
||
pid_t pid = fork();
|
||
if (pid < 0) {
|
||
close(execpipe[0]); close(execpipe[1]);
|
||
logmsg("fork failed: %s", strerror(errno)); return -1;
|
||
}
|
||
if (pid == 0) {
|
||
/* child: exec the app. M2.12 注入 MEOW_LOG_DIR + MEOW_DATA_DIR/MEOW_CACHE_DIR
|
||
* （exFAT 无 symlink，数据目录用 env 传给应用）。PATH 继承 launcher（含卡上 opt/bin
|
||
* 若在），卡不在则回退普通 PATH。M2.52 追加注入 MEOW_LOG_APP(app_id)+MEOW_LOG_LEVEL
|
||
* （读全局 log.level），使 SDK meow_log() 按 app 分离写 apps/<app_id>.log 并做级别过滤。 */
|
||
close(execpipe[0]);
|
||
char *argv[] = { a->exec, NULL };
|
||
char env_path[320], env_log[320], env_data[320], env_cache[320];
|
||
char env_app[MEOW_APP_ID_MAX + 16], env_lvl[48];
|
||
char env_fpng[400], env_fidx[400], env_fapp[96];
|
||
char env_mf[24];
|
||
char env_tier[24];
|
||
char env_fs[20];
|
||
char env_cls[MEOW_FCLS_COUNT][2][400];
|
||
char *envp[40]; /* PATH,HOME,log_dir,log_app,log_lvl,font 全局(3),多字体(1),tier(1),class(≤12),fullscreen(1),data,cache */
|
||
int ne = 0;
|
||
const char *cp = getenv("PATH");
|
||
snprintf(env_path, sizeof env_path, "PATH=%s", cp ? cp : "/usr/bin:/bin");
|
||
envp[ne++] = env_path;
|
||
envp[ne++] = "HOME=/root";
|
||
if (log_dir[0]) { snprintf(env_log, sizeof env_log, "MEOW_LOG_DIR=%s", log_dir); envp[ne++] = env_log; }
|
||
/* M2.52：MEOW_LOG_APP=app_id（=app.json.package，缺省回退目录名；与注册表一致；无 id 则跳过，SDK 兜底 "app"） */
|
||
if (a->id[0]) { snprintf(env_app, sizeof env_app, "MEOW_LOG_APP=%s", a->id); envp[ne++] = env_app; }
|
||
/* M2.52：MEOW_LOG_LEVEL 读全局 log.level（error/warn/info/debug→索引0/1/2/3），
|
||
* SDK 只认大写字符串名(ERROR/WARN/INFO/DEBUG)，故转大写注入；缺省兜底 info。 */
|
||
{
|
||
static const char *lvl_name[] = { "ERROR", "WARN", "INFO", "DEBUG" };
|
||
int lv = 2; /* 默认 info */
|
||
meow_settings_get_enum("log.level", &lv);
|
||
if (lv < 0 || lv > 3) lv = 2;
|
||
snprintf(env_lvl, sizeof env_lvl, "MEOW_LOG_LEVEL=%s", lvl_name[lv]);
|
||
envp[ne++] = env_lvl;
|
||
}
|
||
/* M2.x：注入「当前生效字体」= 系统 font.file（launcher 已 load 的那套），
|
||
* SDK meow_ui_gfx.load_font 优先读 MEOW_FONT_PNG/IDX，app 未自带字库（§5.7 load_handle
|
||
* 未实现）时跟随系统字体，不再硬编码 MeowAPPs/fonts。无卡/无可用字体则跳过注入，
|
||
* SDK 自行回退卡默认→固件→点阵。 */
|
||
{
|
||
static const char *cls_env_png[MEOW_FCLS_COUNT] = {
|
||
"MEOW_FONT_CLS_CJK_PNG", "MEOW_FONT_CLS_CJK_SYM_PNG", "MEOW_FONT_CLS_NUM_PNG",
|
||
"MEOW_FONT_CLS_LATIN_PNG", "MEOW_FONT_CLS_LATIN_SYM_PNG", "MEOW_FONT_CLS_OTHER_PNG" };
|
||
static const char *cls_env_idx[MEOW_FCLS_COUNT] = {
|
||
"MEOW_FONT_CLS_CJK_IDX", "MEOW_FONT_CLS_CJK_SYM_IDX", "MEOW_FONT_CLS_NUM_IDX",
|
||
"MEOW_FONT_CLS_LATIN_IDX", "MEOW_FONT_CLS_LATIN_SYM_IDX", "MEOW_FONT_CLS_OTHER_IDX" };
|
||
static const char *cls_keys[MEOW_FCLS_COUNT] = {
|
||
"font.class_cjk", "font.class_cjk_sym", "font.class_num",
|
||
"font.class_latin", "font.class_latin_sym", "font.class_other" };
|
||
char fpng[400], fidx[400], fam[96];
|
||
int have_global;
|
||
int mf_on = 0;
|
||
meow_settings_get_switch("display.multi_font", &mf_on);
|
||
snprintf(env_mf, sizeof env_mf, "MEOW_MULTI_FONT=%d", mf_on ? 1 : 0);
|
||
envp[ne++] = env_mf;
|
||
/* M2.5x：字库档 MEOW_FONT_TIER=<0|1|2> —— 按 app.json "fonts" 声明注入，并合并
|
||
* 「加载大字库」开关（font.load_full → 强制 ≥GBK）得**生效档**；0=默认4K常用，
|
||
* 1=大字库GBK，2=Full。SDK meow_ui_gfx 读入存档并按档装载（见
|
||
* meow_font_effective_paths_tiered；真正装载由 meow_font_reload_tier 实现）。 */
|
||
int eff_tier = meow_font_effective_tier(a->fonts);
|
||
snprintf(env_tier, sizeof env_tier, "MEOW_FONT_TIER=%d", eff_tier);
|
||
envp[ne++] = env_tier;
|
||
have_global = (meow_font_effective_paths_tiered(eff_tier, fpng, sizeof fpng,
|
||
fidx, sizeof fidx, fam, sizeof fam) == 0);
|
||
if (have_global) {
|
||
snprintf(env_fpng, sizeof env_fpng, "MEOW_FONT_PNG=%s", fpng);
|
||
snprintf(env_fidx, sizeof env_fidx, "MEOW_FONT_IDX=%s", fidx);
|
||
snprintf(env_fapp, sizeof env_fapp, "MEOW_FONT_APP=%s", fam);
|
||
envp[ne++] = env_fpng;
|
||
envp[ne++] = env_fidx;
|
||
envp[ne++] = env_fapp;
|
||
logmsg("launch: font env %s/%s (family=%s)", fpng, fidx, fam);
|
||
}
|
||
/* M2.5x 多字体：每类注入 png/idx（命中则覆盖全局；类值为空=跟随全局，不注入）。
|
||
* SDK 读这些 env 构建多字体映射；同 family 去重由 SDK 侧 meow_font_config_multifont 处理。 */
|
||
if (mf_on)
|
||
for (int c = 0; c < MEOW_FCLS_COUNT; c++) {
|
||
char ref[MEOW_SET_MAX_LEN], abs[400], idxabs[400];
|
||
if (meow_settings_get_str(cls_keys[c], ref, sizeof ref) != 0 || !ref[0]) continue;
|
||
if (meow_font_resolve_path(ref, abs, sizeof abs) != 0 || access(abs, R_OK) != 0) continue;
|
||
snprintf(idxabs, sizeof idxabs, "%s", abs);
|
||
size_t n4 = strlen(idxabs);
|
||
if (n4 > 4 && !strcmp(idxabs + n4 - 4, ".png")) {
|
||
idxabs[n4-4]='.'; idxabs[n4-3]='i'; idxabs[n4-2]='d'; idxabs[n4-1]='x'; idxabs[n4]=0;
|
||
}
|
||
snprintf(env_cls[c][0], sizeof env_cls[c][0], "%s=%s", cls_env_png[c], abs);
|
||
snprintf(env_cls[c][1], sizeof env_cls[c][1], "%s=%s", cls_env_idx[c], idxabs);
|
||
envp[ne++] = env_cls[c][0];
|
||
envp[ne++] = env_cls[c][1];
|
||
}
|
||
}
|
||
/* 全屏声明：app.json "fullscreen"（app 级）→ 注入 MEOW_FULLSCREEN=1，SDK 端
|
||
* meow_ui_init 据此预先设全屏。基座只接 app 级；活动级 route.<id>.fullscreen
|
||
* （meow_route.fullscreen）在 M3 活动切换时由后续代理消费（此处暂不下发）。
|
||
* 未声明则不注入（SDK 默认非全屏）。 */
|
||
if (a->fullscreen) {
|
||
snprintf(env_fs, sizeof env_fs, "MEOW_FULLSCREEN=1");
|
||
envp[ne++] = env_fs;
|
||
}
|
||
char pkg[64];
|
||
if (meow_pkg_name(a->exec, pkg, sizeof pkg) == 0) {
|
||
snprintf(env_data, sizeof env_data, "MEOW_DATA_DIR=/usr/data/mnt/sd_0/MeowData/%s/data", pkg);
|
||
snprintf(env_cache, sizeof env_cache, "MEOW_CACHE_DIR=/usr/data/mnt/sd_0/MeowData/%s/cache", pkg);
|
||
envp[ne++] = env_data;
|
||
envp[ne++] = env_cache;
|
||
}
|
||
envp[ne] = NULL;
|
||
execve(a->exec, argv, envp);
|
||
int e = errno;
|
||
(void)write(execpipe[1], &e, sizeof e); /* reached only on exec failure */
|
||
_exit(127);
|
||
}
|
||
close(execpipe[1]);
|
||
int exe_err = 0;
|
||
ssize_t er = read(execpipe[0], &exe_err, sizeof exe_err);
|
||
close(execpipe[0]);
|
||
if (er > 0) {
|
||
logmsg("launch FAILED execve(%s): %s (errno %d)", a->exec,
|
||
strerror(exe_err), exe_err);
|
||
int st = 0;
|
||
waitpid(pid, &st, 0); /* reap the failed child */
|
||
return -1;
|
||
}
|
||
|
||
/* GESTURE_BACK §2.4：应用启动即写 immersive 状态，watchdog 依此隐藏/保留虚拟返回键 */
|
||
meow_write_app_state(a->immersive == '1' ? 1 : 0);
|
||
|
||
/* watchdog for virtual back key / gestures */
|
||
char wd1[192], wd2[192], pidstr[16];
|
||
pid_t wpid = 0;
|
||
snprintf(pidstr, sizeof pidstr, "%d", pid);
|
||
if (access(WATCHDOG1, X_OK) == 0)
|
||
snprintf(wd1, sizeof wd1, "%s", WATCHDOG1);
|
||
else if (access(WATCHDOG2, X_OK) == 0)
|
||
snprintf(wd1, sizeof wd1, "%s", WATCHDOG2);
|
||
else
|
||
wd1[0] = 0;
|
||
if (wd1[0]) {
|
||
wpid = fork();
|
||
if (wpid == 0) {
|
||
/* pass the same boot log file + dir so all MeowAPPs components
|
||
* log to one place */
|
||
char *argv[] = { wd1, pidstr, NULL };
|
||
char *envp[] = { "PATH=/usr/bin:/bin", NULL, NULL, NULL };
|
||
char file_env[320], dir_env[256];
|
||
if (log_file[0]) {
|
||
snprintf(file_env, sizeof file_env, "MEOW_LOG_FILE=%s", log_file);
|
||
envp[1] = file_env;
|
||
}
|
||
if (log_dir[0]) {
|
||
snprintf(dir_env, sizeof dir_env, "MEOW_LOG_DIR=%s", log_dir);
|
||
envp[2] = dir_env;
|
||
}
|
||
execve(wd1, argv, envp);
|
||
_exit(0);
|
||
}
|
||
if (wpid > 0) logmsg("watchdog %s pid=%d", wd1, wpid);
|
||
}
|
||
|
||
/* wait for app; in-app kill = VOL_DOWN x3 quick taps (the old
|
||
* PREVIOUS+VOL_UP hold combo is retired — the PREVIOUS key's GPIO
|
||
* never fires on this unit, §18.12). Volume is snapped on the first
|
||
* tap and restored when the sequence completes. */
|
||
int status = 0;
|
||
int app_prev_vold = 0;
|
||
int app_seq_hits = 0;
|
||
unsigned long long app_seq_last = 0;
|
||
struct vol_snap app_vol0 = { -1, -1 };
|
||
/* M2.11 D：应用二进制/资源若在卡上，卡被拔可能 SIGBUS 崩。启动前记录，运行期监测卡移除。
|
||
* （拷贝到内存/板载 staging 的方案先不做，仅记录 APPS.md 规范。） */
|
||
int app_on_card = (strncmp(a->exec, MEOWAPPS, strlen(MEOWAPPS)) == 0);
|
||
if (app_on_card) logmsg("app on card (%s): monitoring card removal during run", a->exec);
|
||
struct keypoll kp_power, kp_keys;
|
||
kp_open(&kp_power, DEV_POWER);
|
||
kp_open(&kp_keys, DEV_KEYS);
|
||
/* M2.17 前台应用会话：系统仍统一控制息屏（应用不自管）。launcher 无法看到应用内触摸，
|
||
* 故以「可物理键」为 idle 信号；前台当前 activity（经 IPC MSG_ACT_FOCUS 上报）若 keep_awake
|
||
* 则不解屏（fg_keep_awake）。唤醒时应用随其输入重绘，launcher 仅 fb_pan_buf0_force 兜底
|
||
* （M2.8 唤醒重绘路径的首步）。见 §18.46。 */
|
||
unsigned long long app_last_input = now_ms();
|
||
unsigned long save_pow[KEYBUF_WORDS], save_keys[KEYBUF_WORDS];
|
||
memcpy(save_pow, kp_power.cur, sizeof save_pow);
|
||
memcpy(save_keys, kp_keys.cur, sizeof save_keys);
|
||
/* M2.24：清上一次会话可能残留的电源菜单标记，只认本次新 watchdog 生成的请求。 */
|
||
unlink(POWMENU_MARKER);
|
||
unlink(POWMENU_ACTIVE);
|
||
for (;;) {
|
||
int r = waitpid(pid, &status, WNOHANG);
|
||
if (r == pid) break;
|
||
if (r < 0 && errno != EINTR) break;
|
||
if (sigterm_flag) { logmsg("sigterm during app"); kill(pid, SIGTERM); break; }
|
||
/* M2.11 D：卡被拔（设备节点消失）且前台应用在卡上 → 主动 SIGTERM 干净退出，
|
||
* 避免应用等 SIGBUS 崩。回菜单走正常应用退出路径。 */
|
||
if (app_on_card && !sd_device_present()) {
|
||
logmsg("hotplug: card removed during app run -> SIGTERM app ");
|
||
kill(pid, SIGTERM);
|
||
usleep(300000);
|
||
if (waitpid(pid, &status, WNOHANG) != pid) { kill(pid, SIGKILL); waitpid(pid, &status, 0); }
|
||
break;
|
||
}
|
||
/* in-app kill: VOL_DOWN x3 quick taps */
|
||
kp_poll(&kp_power, NULL, NULL);
|
||
kp_poll(&kp_keys, NULL, NULL);
|
||
int vold = 0;
|
||
for (int w = 0; w < KEYBUF_WORDS; w++) {
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEDOWN % 32))) vold = 1;
|
||
}
|
||
/* M2.17 自动息屏（app 会话）：任意物理键边沿重置计时；空闲>timeout 且非 keep_awake → 息屏；
|
||
* 息屏后再按键 → 唤醒（fb_pan_buf0_force 兜底 LCDC 落 buffer0，内容随应用输入重绘）。 */
|
||
{
|
||
int key_edge = 0;
|
||
for (int w = 0; w < KEYBUF_WORDS; w++)
|
||
if (kp_power.cur[w] != save_pow[w] || kp_keys.cur[w] != save_keys[w]) { key_edge = 1; break; }
|
||
if (key_edge) {
|
||
memcpy(save_pow, kp_power.cur, sizeof save_pow);
|
||
memcpy(save_keys, kp_keys.cur, sizeof save_keys);
|
||
app_last_input = now_ms();
|
||
if (meow_auto_slept) {
|
||
logmsg("auto screen-off (app): key wake");
|
||
meow_panel_on();
|
||
meow_auto_slept = 0;
|
||
fb_pan_buf0_force();
|
||
}
|
||
}
|
||
if (screen_off_timeout > 0 && meow_screen_on && !meow_auto_slept && !fg_keep_awake()) {
|
||
if (now_ms() - app_last_input >= (unsigned long long)screen_off_timeout * 1000) {
|
||
meow_panel_off();
|
||
meow_auto_slept = 1;
|
||
logmsg("auto screen-off (app %s) after %ds idle (mode=%s keep_awake=%d)",
|
||
a->name, screen_off_timeout, screen_off_mode ? "black" : "panel",
|
||
fg_keep_awake());
|
||
}
|
||
}
|
||
}
|
||
if (vold && !app_prev_vold) {
|
||
unsigned long long nw = now_ms();
|
||
if (app_seq_hits == 0) app_vol0 = vol_snapshot();
|
||
else if (nw - app_seq_last > (unsigned)seq_gap_ms) {
|
||
app_seq_hits = 0;
|
||
app_vol0 = vol_snapshot();
|
||
}
|
||
app_seq_hits++;
|
||
app_seq_last = nw;
|
||
if (app_seq_hits >= 3) {
|
||
logmsg("kill seq: VOL_DOWN x3 -> SIGTERM app");
|
||
vol_restore(app_vol0);
|
||
kill(pid, SIGTERM);
|
||
usleep(500000);
|
||
kill(pid, SIGKILL);
|
||
waitpid(pid, &status, 0);
|
||
break;
|
||
}
|
||
}
|
||
app_prev_vold = vold;
|
||
if (app_seq_hits > 0 && now_ms() - app_seq_last > (unsigned)seq_gap_ms * 2)
|
||
app_seq_hits = 0;
|
||
/* M2.24 全面按键接管：watchdog 检测到电源长按≥3s 写 /tmp/meow_power_menu → 此处消费：
|
||
* SIGSTOP 应用冻结 → 写 powmenu_active 让 watchdog 让位 → 统一电源菜单（launcher 一处绘制，
|
||
* 复用 show_power_menu，含触摸/音量导航/电源确认/8s 强关/pm_interacted 保护）→ 菜单关 →
|
||
* 清 active → SIGCONT 应用续跑。 */
|
||
if (access(POWMENU_MARKER, F_OK) == 0) {
|
||
unlink(POWMENU_MARKER);
|
||
logmsg("watchdog: power menu request (app %s) -> SIGSTOP + menu", a->name);
|
||
kill(pid, SIGSTOP);
|
||
int mfd = open(POWMENU_ACTIVE, O_WRONLY | O_CREAT | O_TRUNC, 0644);
|
||
if (mfd >= 0) { write(mfd, "1", 1); close(mfd); }
|
||
int pm_ret = show_power_menu();
|
||
unlink(POWMENU_ACTIVE);
|
||
kill(pid, SIGCONT);
|
||
logmsg("watchdog: power menu closed (ret=%d) -> SIGCONT app", pm_ret);
|
||
/* M2.25：菜单期间按键可能已变化，重播 save_pow/save_keys 防误判 key_edge
|
||
* （避免菜单关闭瞬间误触发「键唤醒」或刷新自动息屏计时）。 */
|
||
kp_poll(&kp_power, NULL, NULL);
|
||
kp_poll(&kp_keys, NULL, NULL);
|
||
memcpy(save_pow, kp_power.cur, sizeof save_pow);
|
||
memcpy(save_keys, kp_keys.cur, sizeof save_keys);
|
||
app_last_input = now_ms(); /* M2.17：菜单交互即输入，重置应用会话自动息屏计时 */
|
||
if (pm_ret != 0) break; /* 关机/重启/回HibyOS：系统通常已 reboot，防御性退出 */
|
||
}
|
||
usleep(100000);
|
||
}
|
||
if (wpid > 0) {
|
||
/* reap the watchdog: SIGTERM then wait up to 2s (it exits when the
|
||
* app dies; bounded so we never hang if it is stuck) */
|
||
kill(wpid, SIGTERM);
|
||
unsigned long long wstart = now_ms();
|
||
while (now_ms() - wstart < 2000) {
|
||
if (waitpid(wpid, NULL, WNOHANG) == wpid) break;
|
||
usleep(50000);
|
||
}
|
||
}
|
||
meow_write_app_state(-1); /* GESTURE_BACK §2.4：应用退出，清 immersive 状态 */
|
||
/* M2.24：应用运行期音量由 watchdog 写（settings.conf 同源）。返回菜单前 re-load，
|
||
* 让菜单音量/状态栏与真实 DAC 一致（watchdog 可能已改）。 */
|
||
settings_load();
|
||
logmsg("app %s exited status=%d", a->name, WEXITSTATUS(status));
|
||
return 0;
|
||
}
|
||
|
||
/* ================================================================== */
|
||
/* main */
|
||
/* ================================================================== */
|
||
static void usage(void)
|
||
{
|
||
fprintf(stderr,
|
||
"usage: meow_launcherd [--sim-hotkey N] [--sim-tap N] [--sim-exit N]\n"
|
||
" [--sim-exit-tap N] [--sim-power-hold N]\n"
|
||
" [--sim-power-pick N] [--sim-no-exec]\n"
|
||
" [--dumpkeys N] [--scan] [--sysdump]\n"
|
||
" [--pkg-install <pkg.mpk>] [--pkg-export <pkg> <out.mpk>]\n"
|
||
" [--ipc-only N] [--ipc-sock <path>] [--appinfo <app.json>]\n"
|
||
" [--fontscan <card_root>]\n");
|
||
}
|
||
|
||
int main(int argc, char **argv)
|
||
{
|
||
long sim_hotkey = 0, sim_tap = 0, sim_exit = 0, dumpkeys = 0;
|
||
int do_scan = 0, do_sysdump = 0, sim_vol = 0;
|
||
long ipc_only_ms = 0;
|
||
const char *appinfo_path = NULL;
|
||
const char *fontscan_root = NULL; /* --fontscan <root>：宿主/qemu 测试字形扫描 */
|
||
const char *pkg_install_mpk = NULL, *pkg_export_name = NULL, *pkg_export_out = NULL;
|
||
for (int i = 1; i < argc; i++) {
|
||
if (!strcmp(argv[i], "--sim-hotkey") && i + 1 < argc) sim_hotkey = atol(argv[++i]);
|
||
else if (!strcmp(argv[i], "--sim-tap") && i + 1 < argc) sim_tap = atol(argv[++i]);
|
||
else if (!strcmp(argv[i], "--sim-exit") && i + 1 < argc) sim_exit = atol(argv[++i]);
|
||
else if (!strcmp(argv[i], "--sim-exit-tap") && i + 1 < argc) sim_exit_tap_ms = atol(argv[++i]);
|
||
else if (!strcmp(argv[i], "--sim-power-hold") && i + 1 < argc) sim_power_hold_ms = atol(argv[++i]);
|
||
else if (!strcmp(argv[i], "--sim-power-pick") && i + 1 < argc) sim_power_pick = atoi(argv[++i]);
|
||
else if (!strcmp(argv[i], "--sim-no-exec")) sim_no_exec = 1;
|
||
else if (!strcmp(argv[i], "--dumpkeys") && i + 1 < argc) dumpkeys = atol(argv[++i]);
|
||
else if (!strcmp(argv[i], "--scan")) do_scan = 1;
|
||
else if (!strcmp(argv[i], "--sysdump")) do_sysdump = 1;
|
||
else if (!strcmp(argv[i], "--sim-vol") && i + 1 < argc) sim_vol = atoi(argv[++i]);
|
||
else if (!strcmp(argv[i], "--ipc-only") && i + 1 < argc) ipc_only_ms = atol(argv[++i]);
|
||
else if (!strcmp(argv[i], "--ipc-sock") && i + 1 < argc) {
|
||
snprintf(ipc_sock_path, sizeof ipc_sock_path, "%s", argv[++i]);
|
||
}
|
||
else if (!strcmp(argv[i], "--appinfo") && i + 1 < argc) appinfo_path = argv[++i];
|
||
else if (!strcmp(argv[i], "--fontscan") && i + 1 < argc) fontscan_root = argv[++i];
|
||
else if (!strcmp(argv[i], "--pkg-install") && i + 1 < argc) pkg_install_mpk = argv[++i];
|
||
else if (!strcmp(argv[i], "--pkg-export") && i + 2 < argc) { pkg_export_name = argv[++i]; pkg_export_out = argv[++i]; }
|
||
else { usage(); return 1; }
|
||
}
|
||
|
||
/* unified log: TF card (or /tmp boot buffer when the card is absent) */
|
||
log_cleanup_old();
|
||
if (log_open_card() == 0)
|
||
fprintf(stderr, "log file: %s\n", log_file);
|
||
else
|
||
fprintf(stderr, "log: no TF card, using /tmp boot buffer (%s)\n",
|
||
BOOT_BUF_TMP);
|
||
logmsg("=== meow_launcherd start (sim_hotkey=%ld sim_tap=%ld sim_exit=%ld dumpkeys=%ld scan=%d) ===",
|
||
sim_hotkey, sim_tap, sim_exit, dumpkeys, do_scan);
|
||
|
||
load_config(); /* hotkey_seq / hotkey_seq_gap / bg_color (also run per
|
||
* menu open so edits apply without a daemon restart) */
|
||
settings_load(); /* M2.11：读系统设置（audio.volume 等），供音量/状态栏使用 */
|
||
|
||
/* M2.6：启动扫描一次 TF 卡 MeowOS/fonts/<family>/<weight>/，填充「字体文件」下拉 preset。
|
||
* 无卡/无字库目录 → 仅默认字体（等价现状）。进设置页时 run_settings_page 会再扫一次。 */
|
||
meow_font_scan_presets();
|
||
|
||
if (fontscan_root) {
|
||
/* M2.6 测试钩子：扫描指定卡根下的 MeowOS/fonts/<family>/<weight>/ 并打印 preset（qemu/宿主可测）。
|
||
* 用于验证 font.json 解析（含 weight）/三件套/缺件跳过/sha 校验 + preset 动态化逻辑。 */
|
||
meow_font_scan_presets_root(fontscan_root);
|
||
printf("fonts=%d\n", font_presets_n);
|
||
for (int i = 0; i < font_presets_n; i++)
|
||
printf(" %d %s -> %s (fam=%s wt=%s)\n", i, font_preset_labels[i], font_presets[i],
|
||
font_preset_fams[i], font_preset_wts[i] ? font_preset_wts[i] : "regular");
|
||
return 0;
|
||
}
|
||
|
||
if (sim_vol > 0) {
|
||
/* M2.14 sim：验证线性渐变——step=1/2/5 下设定音量按 1% 逐级爬升/回落，
|
||
* 每 1% 经 meow_dac_vol_write 写一次真实 DAC，打点进 log（stderr）。 */
|
||
settings_volume = 60; /* 固定起点，便于对比 */
|
||
settings_volume_step = (sim_vol > 5) ? 5 : (sim_vol < 1 ? 1 : sim_vol);
|
||
int base = settings_volume;
|
||
/* UP */
|
||
settings_volume_adj(+settings_volume_step);
|
||
for (int i = 0; i < 300 && vol_ramp_dir != 0; i++) { vol_ramp_tick(0); usleep(20000); }
|
||
int up = settings_volume;
|
||
/* DOWN */
|
||
settings_volume_adj(-settings_volume_step);
|
||
for (int i = 0; i < 300 && vol_ramp_dir != 0; i++) { vol_ramp_tick(0); usleep(20000); }
|
||
int down = settings_volume;
|
||
printf("sim-vol: step=%d base=%d up=%d down=%d (each 1%% logged 'DAC vol -> L/R=')\n",
|
||
settings_volume_step, base, up, down);
|
||
/* 长按：held=1 持续延段爬升 → 连续渐变到上限 clamp */
|
||
settings_volume = 60;
|
||
settings_volume_adj(+settings_volume_step);
|
||
for (int i = 0; i < 300 && vol_ramp_dir != 0; i++) { vol_ramp_tick(1); usleep(20000); }
|
||
printf("sim-vol-held: step=%d long-press top=%d (expect clamp 100)\n",
|
||
settings_volume_step, settings_volume);
|
||
return 0;
|
||
}
|
||
|
||
if (pkg_install_mpk) {
|
||
/* M2.12 .mpk 安装接口（CLI 钩子；UI 后期）。安全、离开主循环。 */
|
||
int r = meow_pkg_install(pkg_install_mpk);
|
||
printf("pkg_install %s -> %d\n", pkg_install_mpk, r);
|
||
return r;
|
||
}
|
||
if (pkg_export_name && pkg_export_out) {
|
||
/* M2.12 .mpk 导出接口（CLI 钩子；UI 后期）。 */
|
||
int r = meow_pkg_export(pkg_export_name, pkg_export_out);
|
||
printf("pkg_export %s -> %s (%d)\n", pkg_export_name, pkg_export_out, r);
|
||
return r;
|
||
}
|
||
|
||
if (do_sysdump) {
|
||
/* M2.11 测试钩子：安全打印系统状态快照（不碰 fb/输入设备，可在常驻 launcher
|
||
* 旁运行验证 A/E 的 BT/WiFi/电量/音量/亮度抓取），然后退出。 */
|
||
meow_sys_refresh();
|
||
printf("batt=%d%% chg=%d mv=%d\n", g_sys.batt, g_sys.charging, g_sys.batt_mv);
|
||
printf("wifi_on=%d ip=%s ssid=%s\n", g_sys.wifi_on, g_sys.wifi_ip[0]?g_sys.wifi_ip:"-",
|
||
g_sys.wifi_ssid[0]?g_sys.wifi_ssid:"-");
|
||
printf("bt_seen=%d bt_on=%d\n", g_sys.bt_seen, g_sys.bt_on);
|
||
printf("vol=%d brightness=%d\n", g_sys.vol, g_sys.brightness);
|
||
printf("data_free_kb=%ld sd_mounted=%d sd_free=%ld sd_total=%ld\n",
|
||
g_sys.data_free_kb, g_sys.sd_mounted, g_sys.sd_free_kb, g_sys.sd_total_kb);
|
||
printf("mode=%d napps=%d ver=%s\n", g_sys.mode, g_sys.napps, g_sys.ver);
|
||
printf("render: eff_rate=%d cfg=%d always_max=%d frames=%llu\n",
|
||
meow_ui_effective_rate(), refresh_rate_cfg, refresh_always_max,
|
||
meow_ui_frames_presented());
|
||
return 0;
|
||
}
|
||
|
||
if (do_scan) {
|
||
struct app apps[MAX_APPS];
|
||
int n = scan_apps(apps);
|
||
printf("state=%d napps=%d\n", n < 0 ? (n == -1 ? 1 : 2) : (n == 0 ? 2 : 0), n < 0 ? 0 : n);
|
||
for (int i = 0; i < n && n > 0; i++)
|
||
printf(" %d %s -> %s ok=%d\n", i, apps[i].name, apps[i].exec, apps[i].ok);
|
||
return 0;
|
||
}
|
||
|
||
if (appinfo_path) {
|
||
/* 阶段 D · M1 debug：解析单个 app.json 并打印路由/框架/服务/图标（qemu 可测静态路由） */
|
||
FILE *f = fopen(appinfo_path, "r");
|
||
if (!f) { printf("appinfo: cannot open %s\n", appinfo_path); return 1; }
|
||
struct app a;
|
||
memset(&a, 0, sizeof a);
|
||
meow_parse_app_json(f, &a);
|
||
fclose(f);
|
||
printf("name=%s\n", a.name[0] ? a.name : "(missing)");
|
||
printf("exec=%s\n", a.exec[0] ? a.exec : "(missing)");
|
||
printf("ok=%d\n", (a.exec[0] && access(a.exec, X_OK) == 0) ? 1 : 0);
|
||
printf("framework=%d\n", a.framework ? 1 : 0);
|
||
printf("icon=%s\n", a.icon[0] ? a.icon : "(none)");
|
||
printf("routes=%d\n", a.nroute);
|
||
for (int i = 0; i < a.nroute; i++)
|
||
printf(" route.%s -> %s (depth=%d keep_awake=%d)\n", a.routes[i].act, a.routes[i].chain,
|
||
chain_depth(a.routes[i].chain), a.routes[i].keep_awake);
|
||
printf("services=%d\n", a.nsvc);
|
||
for (int i = 0; i < a.nsvc; i++)
|
||
printf(" service.%s -> mode:%d restart:%d max:%d window_ms:%d\n",
|
||
a.svcs[i].name, a.svcs[i].mode, a.svcs[i].restart,
|
||
a.svcs[i].max, a.svcs[i].window_ms);
|
||
return 0;
|
||
}
|
||
|
||
if (ipc_only_ms > 0) {
|
||
/* 阶段 D · M0/M1 sim：仅跑 IPC 骨架（免 fb/输入设备），供 qemu 下用 meow_ipc
|
||
* 验证 HELLO→ACK、ACT_QUERY→链路。无卡时 /tmp 缓冲承载日志。 */
|
||
fprintf(stderr, "ipc-only: socket=%s\n", ipc_sock_path);
|
||
int rc = meow_ipc_init();
|
||
if (rc != 0) { fprintf(stderr, "ipc-only: IPC init failed, exiting\n"); return 1; }
|
||
unsigned long long s0 = now_ms();
|
||
while (!sigterm_flag && now_ms() - s0 < (unsigned long long)ipc_only_ms) {
|
||
meow_ipc_process();
|
||
meow_notif_tick(); /* M2a：通知 TTL 10s 转储（§8）*/
|
||
usleep(POLL_MS * 1000);
|
||
}
|
||
ipc_shutdown = 1;
|
||
unlink(ipc_sock_path);
|
||
logmsg("=== meow_launcherd ipc-only exit ===");
|
||
return 0;
|
||
}
|
||
|
||
/* pid file */
|
||
int pfd = open(PID_PATH, O_WRONLY | O_CREAT | O_TRUNC, 0644);
|
||
if (pfd >= 0) {
|
||
char pbuf[16];
|
||
int l = snprintf(pbuf, sizeof pbuf, "%d\n", getpid());
|
||
write(pfd, pbuf, l);
|
||
close(pfd);
|
||
}
|
||
|
||
signal(SIGTERM, on_sigterm);
|
||
signal(SIGINT, on_sigterm);
|
||
signal(SIGHUP, SIG_IGN);
|
||
|
||
/* 阶段 D · M0：启动 IPC 线程（AF_UNIX /usr/data/meow_ipc.sock）。幂等；失败只 log，
|
||
* 主循环仍跑（10ms 热键轮询不受影响）。线程创建晚于进程但有独立生命周期。 */
|
||
meow_ipc_init();
|
||
|
||
struct keypoll kp_power, kp_keys;
|
||
/* retry opening the input devices (they may not exist yet at boot) */
|
||
for (int tries = 0; tries < 30; tries++) {
|
||
if (kp_open(&kp_power, DEV_POWER) == 0 &&
|
||
kp_open(&kp_keys, DEV_KEYS) == 0)
|
||
break;
|
||
logmsg("input devices not ready, retry %d/30 in 1s", tries + 1);
|
||
log_poll_card(); /* flush boot buffer even if input devices lag */
|
||
sleep(1);
|
||
}
|
||
if (!kp_power.ok || !kp_keys.ok)
|
||
logmsg("WARNING: input devices unavailable, launcher blind");
|
||
|
||
/* ===== MeowOS 常驻主界面（M2.2 修复批次）=====
|
||
* 播放器已死（find_hiby_pid()==0：bootmenu MeowOS 分支 exec、或热键切 MeowOS 后 exec，
|
||
* 二者皆此语境）时，launcher == MeowOS 主界面常驻：
|
||
* - 启动即扫描并自绘应用列目录（run_menu 画 buffer0 + FBIOPAN yoffset=0），
|
||
* 绝不等到首次热键才画 —— 修复「切到 MeowOS 后屏幕停留在播放器最后一帧」；
|
||
* - 无存活播放器 → run_menu 内不 SIGSTOP / 不备份 / 不 SIGCONT 死播放器、不恢复死帧；
|
||
* - BACK TO PLAYER → 显示「需重启」提示并留在主界面（不渲染死帧）；
|
||
* - 仅 SIGTERM 退出（rcS/SSH 关停），退出时屏幕保持应用列表主界面（无残帧）。
|
||
* 若此时竟有存活播放器（不应用于 MeowOS，防御性），回落到下面的旧覆盖路径。 */
|
||
meow_mode = is_meow_mode();
|
||
/* M2.12：卡在则把 /usr/data/mnt/sd_0/MeowOS/opt/bin 前插 PATH（外围 CLI 已迁卡，
|
||
* 按需可用；卡不在跳过，绝不崩）。SSH 会话另由 rootfs /etc/profile.d/meow_card_path.sh 处理。 */
|
||
if (ensure_card_mounted() || sd_mounted()) {
|
||
setenv("PATH", "/usr/data/mnt/sd_0/MeowOS/opt/bin:/usr/bin:/bin:/usr/sbin:/sbin", 1);
|
||
logmsg("PATH: card MeowOS/opt/bin prepended");
|
||
} else {
|
||
logmsg("PATH: no card, MeowOS/opt/bin skipped");
|
||
}
|
||
if (meow_mode) {
|
||
/* M2.2 拔营：启动即尝试挂 TF 卡 + 联网（非阻塞）；失败由 run_menu 后台周期重试。 */
|
||
ensure_card_mounted();
|
||
ensure_wifi();
|
||
struct app apps[MAX_APPS];
|
||
int n = scan_apps(apps);
|
||
int state = (n < 0) ? (n == -1 ? 1 : 2) : (n == 0 ? 2 : 0);
|
||
int napps = n < 0 ? 0 : n;
|
||
logmsg("MeowOS mode: hiby_player NOT running -> resident app-list home "
|
||
"(state=%d napps=%d), drain-to-home immediately", state, napps);
|
||
run_menu(apps, napps, state, sim_tap, sim_exit);
|
||
logmsg("=== meow_launcherd exit (MeowOS mode) ===");
|
||
if (log_fd >= 0) { close(log_fd); log_fd = -1; }
|
||
ipc_shutdown = 1; unlink(ipc_sock_path);
|
||
unlink(PID_PATH);
|
||
return 0;
|
||
}
|
||
|
||
/* hotkey state: power_voldown (default) + legacy seq */
|
||
int prev_pwr = 0, prev_prev = 0;
|
||
int prev_vold = 0, prev_volu = 0, prev_play = 0, prev_nxt = 0;
|
||
int pwr_hold_armed = 0; /* power held, within trigger window */
|
||
unsigned long long pwr_down_at = 0;
|
||
int seq_key_prev = 0; /* the configured seq key, edge-tracked */
|
||
int seq_hits = 0;
|
||
unsigned long long seq_last_at = 0;
|
||
struct vol_snap seq_vol0 = { -1, -1 };
|
||
|
||
long sim_hk_done = 0;
|
||
unsigned long long t0 = now_ms();
|
||
int log_tick = 0; /* periodic card-log retry (~1s) while no card log */
|
||
|
||
if (hotkey_mode == HOTKEY_MODE_PWRVOL)
|
||
logmsg("ready, hotkey = power_voldown (hold power, tap VOL_DOWN)");
|
||
else
|
||
logmsg("ready, hotkey = %d taps of key code %d (gap %dms)",
|
||
seq_len, seq_codes[0], seq_gap_ms);
|
||
|
||
while (!sigterm_flag) {
|
||
unsigned long long t = now_ms();
|
||
long el = (long)(t - t0);
|
||
|
||
/* 阶段 D · M0：排空 IPC 队列（非阻塞，零延迟；热键轮询 10ms 不受 socket 阻塞） */
|
||
meow_ipc_process();
|
||
meow_notif_tick(); /* M2a：通知 TTL 10s 转储（§8）*/
|
||
|
||
/* sample current key states */
|
||
kp_poll(&kp_power, NULL, NULL);
|
||
kp_poll(&kp_keys, NULL, NULL);
|
||
int pwr = 0, prev = 0, vold = 0, volu = 0, play = 0, nxt = 0;
|
||
for (int w = 0; w < KEYBUF_WORDS; w++) {
|
||
if (kp_power.cur[w] & (1UL << (KEY_POWER % 32))) pwr = 1;
|
||
if (kp_power.cur[w] & (1UL << (KEY_PREVIOUSSONG % 32))) prev = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEDOWN % 32))) vold = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEUP % 32))) volu = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_PLAYPAUSE % 32))) play = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_NEXT % 32))) nxt = 1;
|
||
}
|
||
|
||
/* sim hotkey: emulate the configured hotkey.
|
||
* power_voldown (default): HOLD power from N, VOL_DOWN tap at N+800
|
||
* (within the 60-2500ms window) — this drives pwr/vold so the
|
||
* real detection below sees the same DOWN edges a physical press
|
||
* would, and fires the menu at ~N+800.
|
||
* seq: 3 quick VOL_UP taps at N, N+300, N+600. */
|
||
if (sim_hotkey > 0 && !sim_hk_done) {
|
||
if (hotkey_mode == HOTKEY_MODE_PWRVOL) {
|
||
if (el >= sim_hotkey && el < sim_hotkey + 3000) pwr = 1;
|
||
if (el >= sim_hotkey + 800 && el < sim_hotkey + 950) vold = 1;
|
||
} else {
|
||
if (el >= sim_hotkey && el < sim_hotkey + 150) volu = 1;
|
||
if (el >= sim_hotkey + 300 && el < sim_hotkey + 450) volu = 1;
|
||
if (el >= sim_hotkey + 600 && el < sim_hotkey + 750) volu = 1;
|
||
if (el >= sim_hotkey + 750) sim_hk_done = 1;
|
||
}
|
||
}
|
||
|
||
if (vold != prev_vold) logmsg("key VOL_DOWN %s", vold ? "DOWN" : "UP");
|
||
if (volu != prev_volu) logmsg("key VOL_UP %s", volu ? "DOWN" : "UP");
|
||
if (play != prev_play) logmsg("key PLAY %s", play ? "DOWN" : "UP");
|
||
if (nxt != prev_nxt) logmsg("key NEXT %s", nxt ? "DOWN" : "UP");
|
||
if (pwr != prev_pwr) logmsg("key POWER %s", pwr ? "DOWN" : "UP");
|
||
if (prev != prev_prev) logmsg("key PREVIOUS %s", prev ? "DOWN" : "UP");
|
||
|
||
/* hotkey trigger (v6.5).
|
||
* DEFAULT — power_voldown: the launcher arms on the power DOWN edge
|
||
* and fires when a VOL_DOWN DOWN edge lands while power is still
|
||
* held, 60-2500ms after the power press. The player sees the power
|
||
* press (its screen-off flow starts — accepted side effect) and the
|
||
* VOL_DOWN tap (volume -1 — accepted). The menu open runs the
|
||
* verified unblank + bring-backlight-only-if-dark logic, so a
|
||
* power-initiated screen-off is undone for the menu. Power release
|
||
* or window expiry disarms; a VOL_DOWN before 60ms or after 2500ms
|
||
* is ignored (a plain volume press while holding power).
|
||
* LEGACY — seq: N quick taps of one key within seq_gap_ms opens the
|
||
* menu (single/double presses stay ordinary volume keys); the taps
|
||
* raise volume, snapshotted and restored on trigger. */
|
||
if (pwr && !prev_pwr && hotkey_mode == HOTKEY_MODE_PWRVOL) {
|
||
pwr_hold_armed = 1;
|
||
pwr_down_at = t;
|
||
logmsg("hotkey: power DOWN, arm hold-window");
|
||
}
|
||
if (!pwr && prev_pwr) pwr_hold_armed = 0; /* release: disarm */
|
||
|
||
int hotkey_fired = 0;
|
||
if (hotkey_mode == HOTKEY_MODE_PWRVOL) {
|
||
/* disarm once the hold window has passed (power still held) */
|
||
if (pwr_hold_armed && pwr && t - pwr_down_at > HK_PWRWIN_MAX)
|
||
pwr_hold_armed = 0;
|
||
if (pwr_hold_armed && pwr && vold && !prev_vold) {
|
||
long since = (long)(t - pwr_down_at);
|
||
if (since >= HK_PWRWIN_MIN && since <= HK_PWRWIN_MAX) {
|
||
logmsg("HOTKEY: power held + VOL_DOWN tap (%ldms) -> menu",
|
||
since);
|
||
hotkey_fired = 1;
|
||
} else {
|
||
logmsg("hotkey: POWER+VOL_DOWN ignored (%ldms outside window)",
|
||
since);
|
||
}
|
||
}
|
||
} else {
|
||
int seq_key = 0;
|
||
for (int w = 0; w < KEYBUF_WORDS; w++) {
|
||
if (kp_power.cur[w] & (1UL << (seq_codes[0] % 32))) seq_key = 1;
|
||
if (kp_keys.cur[w] & (1UL << (seq_codes[0] % 32))) seq_key = 1;
|
||
}
|
||
if (seq_key && !seq_key_prev) { /* DOWN edge */
|
||
if (seq_hits == 0) seq_vol0 = vol_snapshot();
|
||
else if (t - seq_last_at > (unsigned)seq_gap_ms) {
|
||
seq_hits = 0; /* gap too long: restart */
|
||
seq_vol0 = vol_snapshot();
|
||
}
|
||
seq_hits++;
|
||
seq_last_at = t;
|
||
logmsg("seq tap %d/%d", seq_hits, seq_len);
|
||
if (seq_hits >= seq_len) {
|
||
logmsg("SEQ HOTKEY: %d taps of key %d -> menu",
|
||
seq_len, seq_codes[0]);
|
||
vol_restore(seq_vol0);
|
||
seq_hits = 0;
|
||
hotkey_fired = 1;
|
||
}
|
||
} else if (!seq_key && seq_key_prev) { /* UP edge: nothing */
|
||
}
|
||
seq_key_prev = seq_key;
|
||
if (seq_hits > 0 && t - seq_last_at > (unsigned)seq_gap_ms * 2)
|
||
seq_hits = 0;
|
||
}
|
||
|
||
if (hotkey_fired) {
|
||
struct app apps[MAX_APPS];
|
||
int n = scan_apps(apps);
|
||
int state = (n < 0) ? (n == -1 ? 1 : 2) : (n == 0 ? 2 : 0);
|
||
int napps = n < 0 ? 0 : n;
|
||
run_menu(apps, napps, state, sim_tap, sim_exit);
|
||
/* restore the player's panel state FIRST (re-blank if the menu
|
||
* opened while blanked), THEN let it resume — so the player never
|
||
* sees a panel that contradicts its display state machine
|
||
* (v6.2 hotfix) */
|
||
restore_backlight();
|
||
cont_player();
|
||
sim_hk_done = 1;
|
||
pwr_hold_armed = 0;
|
||
/* absorb current state as baseline for the menu keys */
|
||
kp_poll(&kp_power, NULL, NULL);
|
||
kp_poll(&kp_keys, NULL, NULL);
|
||
prev_vold = prev_volu = prev_play = prev_nxt = 0;
|
||
prev_pwr = prev_prev = 0;
|
||
seq_key_prev = 0;
|
||
seq_hits = 0;
|
||
for (int w = 0; w < KEYBUF_WORDS; w++) {
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEDOWN % 32))) prev_vold = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEUP % 32))) prev_volu = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_PLAYPAUSE % 32))) prev_play = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_NEXT % 32))) prev_nxt = 1;
|
||
if (kp_power.cur[w] & (1UL << (KEY_POWER % 32))) prev_pwr = 1;
|
||
if (kp_power.cur[w] & (1UL << (KEY_PREVIOUSSONG % 32))) prev_prev = 1;
|
||
}
|
||
/* the menu just proved the card is present: flush */
|
||
log_poll_card();
|
||
continue;
|
||
}
|
||
|
||
prev_vold = vold; prev_volu = volu; prev_play = play; prev_nxt = nxt;
|
||
prev_pwr = pwr; prev_prev = prev;
|
||
|
||
if (dumpkeys > 0 && el >= dumpkeys) {
|
||
logmsg("dumpkeys duration reached, exit");
|
||
break;
|
||
}
|
||
|
||
/* card may have mounted after S90: open the card log and move the
|
||
* /tmp boot buffer into it (no menu needed to see boot logs) */
|
||
if (log_fd < 0 && (++log_tick % 100) == 0) log_poll_card();
|
||
|
||
/* NOTE: the Bug B backlight keeper was REMOVED (2026-08-28 hotfix).
|
||
* It restored brightness + FBIOBLANK(0) after the player's bkl_time
|
||
* screen timeout, which unblanked the panel behind the player's back
|
||
* and froze its display state machine (UI gone, keys dead — device
|
||
* log: keeper at 40.9s, player wedged). The player owns the panel
|
||
* blank state; the launcher never touches fb0/backlight outside the
|
||
* menu/app sessions anymore. The player's own "背光时间" timeout is
|
||
* expected stock behaviour (set it to 常亮 in the player settings UI
|
||
* if unwanted). */
|
||
|
||
usleep(POLL_MS * 1000);
|
||
}
|
||
|
||
/* If the player is still stopped we never made it through the menu path's
|
||
* restore+resume (e.g. SIGKILL-free SIGTERM race): restore the panel state
|
||
* before resuming. When the player is already resumed the menu path did it,
|
||
* and re-running restore_backlight here would write brightness onto a panel
|
||
* the player still believes is blanked — leave it alone. */
|
||
if (player_stopped) { fb_restore_player(); restore_backlight(); }
|
||
cont_player();
|
||
logmsg("=== meow_launcherd exit ===");
|
||
if (log_fd >= 0) { close(log_fd); log_fd = -1; }
|
||
ipc_shutdown = 1; unlink(ipc_sock_path);
|
||
unlink(PID_PATH);
|
||
return 0;
|
||
}
|