AskaEth
c3abc3fee4
- 面板一次性解锁恢复口：/tmp/meow_pin_unlock_once 存在即被锁屏页消费删除并放行一次 （不校验 PIN、不清 system.pin、不重置失败计数；重启标志自然消失；lck_unlock_once_consume， launcher 侧只做检查/消费，panel 端点由主会话另实现）。 - 系统设置「安全 → 锁屏 PIN」页（lock_settings.c，subpage.c 脚手架）：状态（未设置/已设置/ 锁定中+剩余）/ 设置（4 位双输确认）/ 修改（需旧 PIN 一次）/ 清除（**免旧 PIN**，仅二次确认弹窗） / system.pin_lock_on_wake 开关；数字输入用 SDK 按钮键盘（lck_input_pin_modal）。 - 电源菜单「锁定」主动锁强化：立即熄屏 + 写 /tmp/meow_pin_locked（主动锁标志，重启消失， 唤醒时无论 pin_lock_on_wake 是否开都必锁屏）+ rm /tmp/meow_pin_unlock_once 作废挂起绕过； lck_wake_should_lock() 作为唤醒门取代 lck_lock_required(1)（主菜单 2 处 + App 会话 2 处）。 - 测试：test_lock_screen 扩 51 ok——bypass 存在即消费/不存在不影响/消费后删除；清除免旧 PIN； 主动锁标志唤醒必锁/清除后回退；全回归 settings_brightness/notif_panel/notif_tf/vol_ramp_jack 无碍； 交叉 -Wall -Wextra 0 warning。meow_launcherd md5 bdf884756ef8a8353aa8e5dfb6e10a0a。 - SYSTEM_SETTINGS.md 同步锁屏行为段。
1401 lines
80 KiB
C
1401 lines
80 KiB
C
/* settings_page.c — MeowOS launcher 拆分模块（LAUNCHER_SPLIT_PLAN 拆分）。*/
|
||
/* 本文件由拆分工具从 meow_launcherd.c 按职责搬移；逻辑与原文 0-diff（仅 static 可见性按跨模块需求调整）。*/
|
||
#include "meow_launcher_internal.h"
|
||
|
||
|
||
/* SC_PRESET 预设表（路径/枚举字符串的"预设项，自定义文件选择留后期"） */
|
||
static const char *const bg_presets[] = { "black", "blue", "green" };
|
||
|
||
static const char *const bg_preset_labels[] = { "黑色", "深蓝", "深绿" };
|
||
|
||
static const char *const hk_presets[] = { "power_voldown", "seq" };
|
||
|
||
static const char *const hk_preset_labels[] = { "电源+音量减", "连按序列" };
|
||
|
||
static const char *const seq_presets[] = { "volup,volup,volup", "voldown,voldown,voldown" };
|
||
|
||
static const char *const seq_preset_labels[] = { "音量上×3", "音量下×3" };
|
||
|
||
/* font.file 行（字体文件）不使用编译期静态表：其 presets/preset_labels 指向字体区
|
||
* (font_presets/font_preset_labels, 见本文件字体区) 的运行时动态数组，计数由
|
||
* s_row_presets() 动态返回（默认 1，进设置页扫描 TF 卡后更新）。见 SMENU 行。 */
|
||
static const char *const out_presets[] = { "hw:0,0" };
|
||
|
||
static const char *const out_preset_labels[] = { "CS43198 (hw:0,0)" };
|
||
|
||
|
||
/* M2.37：息屏时间滑条改为「离散档位」而非线性 0~86400 秒（线性步进 1 根本调不到 30s，
|
||
* 上限 24h 过于抽象）。档位 0=常亮；从 5s 起步的细粒度段可精调「30s 左右」，随后按
|
||
* 45s/分/刻/时 跳档，最高 2 时。滑条值 = 档位索引（0..S_TIME_TIERS_N-1，步进 1），
|
||
* 落盘仍写「秒」（display.screen_off_timeout）；索引<->秒双向映射见 s_time_tier_*。 */
|
||
static const int s_time_tiers[] = {
|
||
0, /* 常亮 */
|
||
5, 10, 15, 20, /* 细粒度段：可精确到 30s 附近 */
|
||
30, 45, /* 半分钟/三刻钟 */
|
||
60, 90, 120, 180, /* 1 分 / 1.5 分 / 2 分 / 3 分 */
|
||
300, 600, 900, /* 5 分 / 10 分 / 15 分 */
|
||
1800, /* 30 分 */
|
||
3600, 7200 /* 1 时 / 2 时 */
|
||
};
|
||
|
||
|
||
/* 设置页扁平化菜单（分组=组标题行，其余=设置项）。顺序即显示顺序。 */
|
||
/* 分组/键/类型/默认与 SYSTEM_SETTINGS.md §1 一致（新建项四端同步）。 */
|
||
static const srow_t SMENU[] = {
|
||
/* 显示 */
|
||
{ "显示", NULL, SC_HEADER, 0,0,0, NULL,NULL,0,0 },
|
||
{ "亮度", "display.brightness", SC_SLIDER, 1,100,1, NULL,NULL,0,0 },
|
||
{ "息屏模式", "display.screen_off_mode", SC_ENUM, 0,0,0, NULL,NULL,0,0 },
|
||
{ "息屏时间", "display.screen_off_timeout", SC_SLIDER, 0,(S_TIME_TIERS_N-1),1, NULL,NULL,0,0 },
|
||
{ "刷新率", "display.refresh_rate", SC_ENUM, 0,0,0, NULL,NULL,0,0 },
|
||
{ "最高刷新率", "display.refresh_always_max", SC_SWITCH, 0,0,0, NULL,NULL,0,0 },
|
||
/* B2b 主题三方式：标题行「主题」改选 display.theme_mode（手动/时段自动），
|
||
* 手动深浅由下方「主题深浅」(display.theme) 控制；时段两键为分钟滑条(STEP=15)。 */
|
||
{ "主题", "display.theme_mode", SC_ENUM, 0,0,0, NULL,NULL,0,0 },
|
||
{ "主题深浅", "display.theme", SC_ENUM, 0,0,0, NULL,NULL,0,0 },
|
||
{ "深色时段开始", "display.theme_dark_start", SC_SLIDER, 0,1439,15, NULL,NULL,0,0 },
|
||
{ "深色时段结束", "display.theme_dark_end", SC_SLIDER, 0,1439,15, NULL,NULL,0,0 },
|
||
{ "背景", "display.background", SC_PRESET, 0,0,0, bg_presets, bg_preset_labels, BG_PRESETS_N,0 },
|
||
/* M2.79 主界面背景图片叠加层强度（图片背景上叠 黑/白 半透明遮罩，防文字/控件被图片淹没） */
|
||
{ "背景叠加强度", "display.bg_overlay_alpha", SC_SLIDER, 0,255,1, NULL,NULL,0,0 },
|
||
/* M2.79 主界面布局：卡片宫格 / 列表（写 ui.home_layout，回主界面即生效） */
|
||
{ "主界面布局", "ui.home_layout", SC_ENUM, 0,0,0, NULL,NULL,0,0 },
|
||
/* 网络：M2.76 WiFi/蓝牙升级为独立子页面（安卓风）。入口行为「列表行」+右侧 chevron，
|
||
* 摘要显示当前状态（s_net_get）；点开进入对应子页（顶栏+返回+分组列表），详见
|
||
* wifi_page.c / bt_page.c。原来散落的开关/列表/信息行收敛进子页面。 */
|
||
{ "网络", NULL, SC_HEADER, 0,0,0, NULL,NULL,0,0 },
|
||
{ "WiFi", NULL, SC_LIST, 0,0,0, NULL,NULL,0, NET_LIST_WIFI_PAGE },
|
||
{ "蓝牙", NULL, SC_LIST, 0,0,0, NULL,NULL,0, NET_LIST_BT_PAGE },
|
||
/* 电源 */
|
||
{ "电源", NULL, SC_HEADER, 0,0,0, NULL,NULL,0,0 },
|
||
{ "长按弹菜单", "power.longpress_menu_ms", SC_SLIDER, 500,5000,500, NULL,NULL,0,0 },
|
||
{ "长按强关", "power.forceoff_ms", SC_SLIDER, 5500,15000,500, NULL,NULL,0,0 },
|
||
{ "退出热键", "power.defeat_hotkey", SC_PRESET, 0,0,0, hk_presets, hk_preset_labels, HK_PRESETS_N,0 },
|
||
/* 开机 */
|
||
{ "开机", NULL, SC_HEADER, 0,0,0, NULL,NULL,0,0 },
|
||
{ "默认系统", "boot.default", SC_ENUM, 0,0,0, NULL,NULL,0,0 },
|
||
{ "显示选单", "boot.menu_enabled", SC_SWITCH, 0,0,0, NULL,NULL,0,0 },
|
||
{ "选单超时", "boot.timeout_ms", SC_SLIDER, 0,30000,500, NULL,NULL,0,0 },
|
||
/* 输入 */
|
||
{ "输入", NULL, SC_HEADER, 0,0,0, NULL,NULL,0,0 },
|
||
{ "热键序列", "input.hotkey_seq", SC_PRESET, 0,0,0, seq_presets, seq_preset_labels, SEQ_PRESETS_N,0 },
|
||
{ "热键窗口", "input.hotkey_window_ms", SC_SLIDER, 0,5000,100, NULL,NULL,0,0 },
|
||
{ "触摸布防", "input.touch_arm_delay_ms", SC_SLIDER, 0,2000,50, NULL,NULL,0,0 },
|
||
{ "滑动方向", "input.swipe_invert", SC_SWITCH, 0,0,0, NULL,NULL,0,0 },
|
||
/* 字体主题 */
|
||
{ "字体主题", NULL, SC_HEADER, 0,0,0, NULL,NULL,0,0 },
|
||
{ "字体文件", "font.file", SC_PRESET, 0,0,0, font_presets, font_preset_labels, 0,0 },
|
||
/* M2.5x 字体档位分层/按需大字库：「加载大字库」= font.load_full（int 0/1 默认 0）。
|
||
* 开 → 强制全系统用大字库 gbk≈20k 档（覆盖 app 未声明/覆盖默认 font.file）；
|
||
* 关（默认）→ 小字库 common≈4k，仅 app 声明 fonts:"full" 才大字库。 */
|
||
{ "加载大字库", "font.load_full", SC_SWITCH, 0,0,0, NULL,NULL,0,0 },
|
||
/* M2.5x 多字体：开关 + 6 个字符类别字体（preset=可用 MeowOS/fonts/<family>/<weight>/ 列表；
|
||
* 值空 = 跟随全局 font.file）。仅开关开启时 6 行可见（s_row_visible）。 */
|
||
{ "多字体", "display.multi_font", SC_SWITCH, 0,0,0, NULL,NULL,0,0 },
|
||
{ "中文(CJK)", "font.class_cjk", SC_PRESET, 0,0,0, font_presets, font_preset_labels, 0,0 },
|
||
{ "中文标点", "font.class_cjk_sym", SC_PRESET, 0,0,0, font_presets, font_preset_labels, 0,0 },
|
||
{ "数字", "font.class_num", SC_PRESET, 0,0,0, font_presets, font_preset_labels, 0,0 },
|
||
{ "拉丁字母", "font.class_latin", SC_PRESET, 0,0,0, font_presets, font_preset_labels, 0,0 },
|
||
{ "半角标点", "font.class_latin_sym", SC_PRESET, 0,0,0, font_presets, font_preset_labels, 0,0 },
|
||
{ "其他字符", "font.class_other", SC_PRESET, 0,0,0, font_presets, font_preset_labels, 0,0 },
|
||
{ "标题字号", "font.size.title", SC_SLIDER, 16,40,1, NULL,NULL,0,0 },
|
||
{ "正文字号", "font.size.body", SC_SLIDER, 12,28,1, NULL,NULL,0,0 },
|
||
{ "UI风格", "ui.style", SC_ENUM, 0,0,0, NULL,NULL,0,0 },
|
||
/* 通知 */
|
||
{ "通知", NULL, SC_HEADER, 0,0,0, NULL,NULL,0,0 },
|
||
{ "通知中心", "notify.center_enabled", SC_SWITCH, 0,0,0, NULL,NULL,0,0 },
|
||
{ "应用配额", "notify.app_quota", SC_SLIDER, 1,64,1, NULL,NULL,0,0 },
|
||
/* 日志 */
|
||
{ "日志", NULL, SC_HEADER, 0,0,0, NULL,NULL,0,0 },
|
||
{ "日志级别", "log.level", SC_ENUM, 0,0,0, NULL,NULL,0,0 },
|
||
{ "写入TF卡", "log.to_card", SC_SWITCH, 0,0,0, NULL,NULL,0,0 },
|
||
/* 音频 */
|
||
{ "音频", NULL, SC_HEADER, 0,0,0, NULL,NULL,0,0 },
|
||
{ "音量", "audio.volume", SC_SLIDER, 0,100,1, NULL,NULL,0,0 },
|
||
{ "音量上限", "audio.volume_max", SC_SLIDER, 0,100,1, NULL,NULL,0,0 },
|
||
{ "音量跳步", "audio.volume_step", SC_SLIDER, 1,5,1, NULL,NULL,0,0 },
|
||
{ "输出设备", "audio.output", SC_PRESET, 0,0,0, out_presets, out_preset_labels, OUT_PRESETS_N,0 },
|
||
/* M6.x 锁屏：安全组「锁屏 PIN」独立子页面（状态/设置/修改/清除/唤醒锁开关，见 lock_settings.c） */
|
||
{ "安全", NULL, SC_HEADER, 0,0,0, NULL,NULL,0,0 },
|
||
{ "锁屏 PIN", NULL, SC_LIST, 0,0,0, NULL,NULL,0, NET_LIST_PIN_PAGE },
|
||
/* 关于（设置列表最底；「关于本机」点开 s_about_open 弹只读设备信息框） */
|
||
{ "关于", NULL, SC_HEADER, 0,0,0, NULL,NULL,0,0 },
|
||
{ "关于本机", NULL, SC_LIST, 0,0,0, NULL,NULL,0, NET_LIST_ABOUT },
|
||
};
|
||
|
||
/* M2.39 左缘返回手势已抽为共享函数 meow_edge_back()（meow_touch.h MEOW_EDGE_W/SWIPE 由
|
||
* 其定义），设置页运行期调用；此处不再定义独立 S_EDGE_W/S_SWIPE_THRESH。 */
|
||
|
||
/* 当前选中行若是滑条：记录其 track 纵向位置，供触摸拖动命中判（x/w 为布局常量，
|
||
* 所有滑条行相同，可直接算；仅 y 随行变，故独立记录）。 */
|
||
static int s_sel_track_y = -1;
|
||
|
||
|
||
/* ---- 行高/位置/导航辅助 ---- */
|
||
/* M2.5x 多字体：6 个「字体文件」行仅在 display.multi_font=1 时可见（开时显示）。
|
||
* 可见性与分组的标题行无关（标题恒显示）。 */
|
||
static int s_row_visible(int i)
|
||
{
|
||
const srow_t *r = &SMENU[i];
|
||
if (r->key && !strncmp(r->key, "font.class_", 11)) {
|
||
int on = 0; meow_settings_get_switch("display.multi_font", &on);
|
||
return on;
|
||
}
|
||
return 1;
|
||
}
|
||
|
||
/* 可见行数（= 压缩后占用的行数；标题行计入，隐藏的 class 行不计） */
|
||
static int s_vis_count(void)
|
||
{
|
||
int n = 0;
|
||
for (int i = 0; i < SMENU_N; i++) if (s_row_visible(i)) n++;
|
||
return n;
|
||
}
|
||
|
||
/* SMENU 下标 → 压缩位置（第几个可见行）；不可见返回 -1 */
|
||
static int s_vis_of(int i)
|
||
{
|
||
if (i < 0 || i >= SMENU_N || !s_row_visible(i)) return -1;
|
||
int p = 0;
|
||
for (int k = 0; k < i; k++) if (s_row_visible(k)) p++;
|
||
return p;
|
||
}
|
||
|
||
/* 压缩位置 → SMENU 下标 */
|
||
static int s_vis_at(int p)
|
||
{
|
||
int c = 0;
|
||
for (int i = 0; i < SMENU_N; i++) if (s_row_visible(i)) { if (c == p) return i; c++; }
|
||
return SMENU_N - 1;
|
||
}
|
||
|
||
|
||
static int s_setting_idx(int i) { return i >= 0 && i < SMENU_N && SMENU[i].ctrl != SC_HEADER && s_row_visible(i); }
|
||
|
||
static int s_first_setting(void)
|
||
{
|
||
for (int i = 0; i < SMENU_N; i++) if (s_setting_idx(i)) return i;
|
||
return 0;
|
||
}
|
||
|
||
static int s_next_setting(int i)
|
||
{
|
||
for (int k = i + 1; k < SMENU_N; k++) if (s_setting_idx(k)) return k;
|
||
return s_first_setting(); /* 回绕 */
|
||
}
|
||
|
||
|
||
/* 字体行（font.file + font.class_*）走「family→字重」两级子菜单（M2.6 字重结构） */
|
||
static int s_row_is_font(const srow_t *r)
|
||
{
|
||
return r && r->key && (!strcmp(r->key, "font.file") || !strncmp(r->key, "font.class_", 11));
|
||
}
|
||
|
||
|
||
/* SC_PRESET 行取「选项表 + 数量」：字体行（font.file + font.class_*）用运行时动态数组
|
||
* （TF 卡 MeowOS/fonts/<family>/<weight>/ 扫描结果，见字体区 font_presets/font_presets_n），
|
||
* 其余行用编译期静态表（r->presets / r->preset_n）。 */
|
||
static const char *const *s_row_presets(const srow_t *r, int *n)
|
||
{
|
||
if (r && r->key && (!strcmp(r->key, "font.file") || !strncmp(r->key, "font.class_", 11))) {
|
||
if (n) *n = font_presets_n;
|
||
return font_presets;
|
||
}
|
||
if (n) *n = r->preset_n;
|
||
return r->presets;
|
||
}
|
||
|
||
|
||
/* 滚动：纯范围钳制到 [0, 内容高度-视口高]（列表拖动滚动用；不强制选中行可见） */
|
||
static int s_clamp_scroll_range(int scroll)
|
||
{
|
||
int total = s_vis_count() * SROW_H;
|
||
if (total <= SET_CONTENT_H) return 0;
|
||
int max_scroll = total - SET_CONTENT_H;
|
||
if (scroll < 0) scroll = 0;
|
||
if (scroll > max_scroll) scroll = max_scroll;
|
||
return scroll;
|
||
}
|
||
|
||
|
||
/* 滚动：保证当前选中行在 [SET_CONTENT_Y, SET_CONTENT_BOT] 内 */
|
||
static int s_clamp_scroll(int sel, int scroll)
|
||
{
|
||
scroll = s_clamp_scroll_range(scroll);
|
||
int pos = s_vis_of(sel);
|
||
if (pos < 0) pos = s_vis_of(s_first_setting());
|
||
int top = pos * SROW_H;
|
||
int bot = top + SROW_H;
|
||
if (top < scroll) scroll = top; /* 选中行滑出顶部 → 上滚 */
|
||
if (bot > scroll + SET_CONTENT_H) scroll = bot - SET_CONTENT_H; /* 滑出底部 → 下滚 */
|
||
return s_clamp_scroll_range(scroll);
|
||
}
|
||
|
||
|
||
/* 行 y 落在 content 坐标 cy 时对应的行号（压缩位置 → SMENU 下标）；越界返回 -1 */
|
||
static int s_row_at_content_y(int cy)
|
||
{
|
||
if (cy < 0) return -1;
|
||
int pos = cy / SROW_H;
|
||
if (pos >= s_vis_count()) return -1;
|
||
return s_vis_at(pos);
|
||
}
|
||
|
||
|
||
/* ---- 值格式化/展示 ---- */
|
||
static void s_fmt_time(int sec, char *buf, int len)
|
||
{
|
||
if (sec <= 0) { snprintf(buf, len, "常亮"); return; }
|
||
if (sec < 60) { snprintf(buf, len, "%d 秒", sec); return; }
|
||
if (sec < 3600) { snprintf(buf, len, "%d 分", sec / 60); return; }
|
||
snprintf(buf, len, "%d 时", sec / 3600);
|
||
}
|
||
|
||
/* B2b 主题时段：分钟(0-1439) → "HH:MM"（如 1140→"19:00"）。注意与 s_fmt_time 的秒语义区分。 */
|
||
static void s_fmt_minutes(int mins, char *buf, int len)
|
||
{
|
||
if (mins < 0) mins = 0;
|
||
if (mins > 1439) mins = 1439;
|
||
snprintf(buf, len, "%02d:%02d", mins / 60, mins % 60);
|
||
}
|
||
|
||
/* 息屏时间：秒 → 最近档位索引（显示滑动位置用；等值优先，跨档取较近档，平手取高档） */
|
||
static int s_time_tier_idx(int sec)
|
||
{
|
||
if (sec <= s_time_tiers[0]) return 0;
|
||
for (int i = 1; i < S_TIME_TIERS_N; i++) {
|
||
if (sec == s_time_tiers[i]) return i;
|
||
if (sec < s_time_tiers[i]) {
|
||
int lo = s_time_tiers[i - 1], hi = s_time_tiers[i];
|
||
return (sec - lo < hi - sec) ? i - 1 : i;
|
||
}
|
||
}
|
||
return S_TIME_TIERS_N - 1;
|
||
}
|
||
|
||
/* 息屏时间：档位索引 → 秒（落盘写给 display.screen_off_timeout 的实值） */
|
||
static int s_time_tier_val(int idx)
|
||
{
|
||
if (idx < 0) idx = 0;
|
||
if (idx >= S_TIME_TIERS_N) idx = S_TIME_TIERS_N - 1;
|
||
return s_time_tiers[idx];
|
||
}
|
||
|
||
static void s_fmt_value(const srow_t *r, char *buf, int len)
|
||
{
|
||
int v = 0;
|
||
if (meow_settings_get_int(r->key, &v) != 0) { snprintf(buf, len, "-"); return; }
|
||
if (!strcmp(r->key, "display.screen_off_timeout")) { s_fmt_time(v, buf, len); return; }
|
||
/* B2b 深色时段（分钟 0-1439 → "HH:MM"）；start==end 视为未配置，显示「未设置」 */
|
||
if (!strcmp(r->key, "display.theme_dark_start") || !strcmp(r->key, "display.theme_dark_end")) {
|
||
int s2 = 0, e2 = 0;
|
||
meow_settings_get_int("display.theme_dark_start", &s2);
|
||
meow_settings_get_int("display.theme_dark_end", &e2);
|
||
if (s2 == e2) { snprintf(buf, len, "未设置"); return; }
|
||
s_fmt_minutes(v, buf, len);
|
||
return;
|
||
}
|
||
/* 长按弹菜单/强关：毫秒换算成秒（0.5 步进，如 "2.5 秒"） */
|
||
if (!strcmp(r->key, "power.longpress_menu_ms") || !strcmp(r->key, "power.forceoff_ms")) {
|
||
if (v % 1000 == 0) snprintf(buf, len, "%d 秒", v / 1000);
|
||
else snprintf(buf, len, "%.1f 秒", v / 1000.0);
|
||
return;
|
||
}
|
||
snprintf(buf, len, "%d", v);
|
||
}
|
||
|
||
static void s_display_value(const srow_t *r, char *buf, int len)
|
||
{
|
||
if (r->ctrl == SC_ENUM) {
|
||
int idx = 0;
|
||
if (meow_settings_get_enum(r->key, &idx) != 0) idx = 0;
|
||
if (meow_settings_enum_label(r->key, idx, buf, len) != 0) snprintf(buf, len, "-");
|
||
return;
|
||
}
|
||
/* SC_PRESET */
|
||
char cur[MEOW_SET_MAX_LEN];
|
||
if (meow_settings_get_str(r->key, cur, sizeof cur) != 0) { snprintf(buf, len, "-"); return; }
|
||
/* M2.5x 多字体：class 行空值 = 跟随全局 font.file */
|
||
if (r->key && !strncmp(r->key, "font.class_", 11) && !cur[0]) {
|
||
snprintf(buf, len, "跟随全局");
|
||
return;
|
||
}
|
||
int pn = 0;
|
||
const char *const *pps = s_row_presets(r, &pn);
|
||
for (int i = 0; i < pn; i++) {
|
||
if (!strcmp(pps[i], cur)) {
|
||
snprintf(buf, len, "%s", (r->preset_labels && r->preset_labels[i][0]) ? r->preset_labels[i] : cur);
|
||
return;
|
||
}
|
||
}
|
||
snprintf(buf, len, "%s", cur);
|
||
}
|
||
|
||
|
||
|
||
/* ---- 控件绘制（MD3 形态；全部用主题角色色，无散落硬编码）---- */
|
||
void s_draw_switch(int x, int y, int on, const meow_ui_theme_t *th)
|
||
{
|
||
int w = 48, h = 28;
|
||
meow_gfx_fill_round(x, y, w, h, h / 2, on ? th->primary : th->surface_container);
|
||
int knob_r = h / 2 - 3;
|
||
int kx = on ? x + w - knob_r * 2 - 3 : x + 3;
|
||
meow_gfx_fill_round(kx, y + 3, knob_r * 2, knob_r * 2, knob_r,
|
||
on ? 0xFFFFFF : th->on_surface_variant);
|
||
}
|
||
|
||
void s_draw_slider(int x, int y, int w, int val, int mn, int mx,
|
||
const meow_ui_theme_t *th)
|
||
{
|
||
int h = 6, ty = y;
|
||
fill_rect(x, ty, w, h, th->surface_container); /* 未达段 */
|
||
int range = mx - mn;
|
||
int frac = range ? (val - mn) * w / range : 0;
|
||
if (frac > 0) fill_rect(x, ty, frac, h, th->primary); /* 已达段 */
|
||
int tx = x + frac, cy = ty + h / 2;
|
||
meow_gfx_fill_round(tx - 12, cy - 12, 24, 24, 12, th->primary); /* thumb */
|
||
meow_gfx_fill_round(tx - 5, cy - 5, 10, 10, 5, 0xFFFFFF); /* thumb 中点 */
|
||
}
|
||
|
||
|
||
/* ---- set 后统一侧效应（DAC/背光/刷新率）+ 可选落盘 ---- */
|
||
static void s_commit(const srow_t *r, int save_now)
|
||
{
|
||
if (!r || !r->key) return;
|
||
if (!strcmp(r->key, "audio.volume")) {
|
||
/* M2.38 Bug1/2：音量变更——拖动中节流写 DAC（防 system() 高频卡死），抬手才无条件直写；
|
||
* 同时把 g_sys.vol 同步为当前值并刷整条状态栏（顶层 VOL 数字随之更新，不整屏重绘）。 */
|
||
g_sys.vol = settings_volume_get();
|
||
paint_sb_right();
|
||
if (save_now) meow_dac_vol_flush(); /* 抬手/点击落盘=无条件直写真实 DAC */
|
||
else meow_dac_vol_write_throttled();/* 拖动中=墙钟节流写 DAC */
|
||
}
|
||
else if (!strcmp(r->key, "display.brightness")) {
|
||
/* M2.46-2 ①：亮度滑条拖动时状态栏百分比数字实时跟。根因：旧代码只 write_brightness(v)
|
||
* 写背光，未同步 g_sys.brightness（状态栏亮度数字取它）也未重绘 → 数字卡住。
|
||
* 修法：写背光后同步 g_sys.brightness 并 paint_sb_right()(≡sb_redraw 整条标脏)。
|
||
* 一致性：其后 meow_sys_refresh 从 sysfs 读回的也是刚写入的 v，二者一致不打架。 */
|
||
int v; if (meow_settings_get_int("display.brightness", &v) == 0) {
|
||
write_brightness(v, "settings_page bright_slider");
|
||
g_sys.brightness = v;
|
||
paint_sb_right();
|
||
}
|
||
}
|
||
else if (!strcmp(r->key, "display.refresh_rate"))
|
||
meow_ui_set_refresh_rate(refresh_rate_cfg);
|
||
else if (!strcmp(r->key, "display.refresh_always_max"))
|
||
meow_ui_set_refresh_always_max(refresh_always_max);
|
||
else if (!strcmp(r->key, "network.wifi_enabled")) {
|
||
int on = 0; meow_settings_get_bool(r->key, &on);
|
||
s_net_toggle_wifi(on);
|
||
s_net_refresh();
|
||
}
|
||
else if (!strcmp(r->key, "network.bluetooth_enabled")) {
|
||
int on = 0; meow_settings_get_bool(r->key, &on);
|
||
s_net_toggle_bt(on);
|
||
s_net_refresh();
|
||
}
|
||
/* M2.44 背景选项真正生效：display.background(black/blue/green) → menu_bg(主界面背景)。
|
||
* 此前 SC_PRESET 只写 meow_settings，未应用 menu_bg → 黑/绿点了没用。 */
|
||
else if (!strcmp(r->key, "display.background")) {
|
||
char bg[16]; meow_settings_get_str(r->key, bg, sizeof bg);
|
||
int mstyle = 0; if (meow_settings_get_enum("ui.style", &mstyle) != 0) mstyle = 0;
|
||
if (mstyle == MEOW_STYLE_MIUIX) { /* MIUIx 暖色族（与 main_menu menu_bg_prepare 同色） */
|
||
if (!strcmp(bg, "blue")) menu_bg = 0x101A2E;
|
||
else if (!strcmp(bg, "green")) menu_bg = 0x14251A;
|
||
else menu_bg = 0x181310;
|
||
} else { /* MD3（既有） */
|
||
if (!strcmp(bg, "blue")) menu_bg = 0x0A1428; /* 深蓝 */
|
||
else if (!strcmp(bg, "green")) menu_bg = 0x0A2814; /* 深绿 */
|
||
else menu_bg = 0x000000; /* black(默认) */
|
||
}
|
||
/* menu_bg 仅主界面背景用（状态栏走 SDK meow_theme bg）；退出设置页回主界面时经
|
||
* menu_bg_sig（含 ui.style）重build 缓存。 */
|
||
}
|
||
/* M2.44 主题/mode 变更：状态栏文字/底色已接 s_ui_theme()，此处仅确保回主界面重绘。 */
|
||
else if (!strcmp(r->key, "display.theme") || !strcmp(r->key, "display.theme_mode") ||
|
||
!strcmp(r->key, "display.theme_dark_start") || !strcmp(r->key, "display.theme_dark_end")) {
|
||
paint_sb_right(); /* 状态栏文字/底色随主题刷新（整条标脏） */
|
||
}
|
||
/* §8.1.2 一键切换闭环：ui.style（md3/miuix）顶级风格族切换 → 全系统即时换肤，无需重启。
|
||
* meow_ui_set_style() 设 SDK g_style（launcher 同一进程内立即生效）+ 广播（App/状态栏下一帧换肤）；
|
||
* paint_sb_right() → sb_sdk_refresh() 逼 SDK 状态栏重读 settings（含 display.background 派生）跟手换肤；
|
||
* meow_dirty_full() 让 launcher 主界面/设置页整帧重绘（s_ui_theme() 已接 ui.style → 换族配色）。
|
||
* 主界面背景缓存经 menu_bg_sig（含 ui.style，见 main_menu.c）在回主界面时自动重建。 */
|
||
else if (!strcmp(r->key, "ui.style")) {
|
||
int st = 0; meow_settings_get_enum("ui.style", &st);
|
||
meow_ui_set_style(st);
|
||
paint_sb_right();
|
||
meow_dirty_full();
|
||
}
|
||
/* M2.5x：字体文件(font.file)变更 → 立即 unload + reload（若已加载）。
|
||
* 置 mfont_forced 跳过 meow_font_ensure 的 SDK 复用捷径，强制走
|
||
* font.file → 卡默认 → 固件 链；全失败则回退 5x7 点阵（系统不死）。 */
|
||
else if (!strcmp(r->key, "font.file")) {
|
||
mfont_ready = 0;
|
||
mfont_forced = 1;
|
||
if (!meow_font_ensure())
|
||
logmsg("font.file: reload failed -> dotmatrix fallback");
|
||
else
|
||
logmsg("font.file: reloaded");
|
||
meow_font_reload_multifont(); /* M2.5x：全局字体变更 → 重配多字体（各类跟随全局者随之更新） */
|
||
meow_dirty_full(); /* 字体变化可能影响所有文本渲染，整帧重绘 */
|
||
}
|
||
/* M2.5x「加载大字库」开关（font.load_full）变更 → 强制重载 launcher 自身字体（小/大字库切换），
|
||
* 并重配多字体；大字库 atlas 大，meow_font_ensure 先 unload 旧再 load 新（防双驻留）。 */
|
||
else if (!strcmp(r->key, "font.load_full")) {
|
||
mfont_ready = 0;
|
||
mfont_forced = 1; /* 跳过 SDK 复用捷径，强制按生效档（gbk/common）真实 reload */
|
||
if (!meow_font_ensure())
|
||
logmsg("font.load_full: reload failed -> dotmatrix fallback");
|
||
else {
|
||
int lf = 0; meow_settings_get_switch("font.load_full", &lf);
|
||
logmsg("font.load_full: reloaded (load_full=%d)", lf);
|
||
}
|
||
meow_font_reload_multifont();
|
||
meow_dirty_full();
|
||
}
|
||
/* M2.5x 多字体：开关或任一类别字体变更 → 重新去重装载类别字库并重绘（多字体可能影响文本渲染）。 */
|
||
else if (!strcmp(r->key, "display.multi_font") || !strncmp(r->key, "font.class_", 11)) {
|
||
meow_font_reload_multifont();
|
||
meow_dirty_full();
|
||
}
|
||
if (save_now) meow_settings_save();
|
||
}
|
||
|
||
static void s_set_int_value(const srow_t *r, int v, int save_now)
|
||
{
|
||
if (!strcmp(r->key, "audio.volume")) v = vol_clamp(v); /* 尊重 audio.volume_max */
|
||
meow_settings_set_int(r->key, v);
|
||
s_commit(r, save_now);
|
||
}
|
||
|
||
/* 滑条拖动/点击落值：对「档位型」息屏时间做 索引→秒 换算，其余行原样写盘。
|
||
* sl_v 为滑条轨迹值（s_slider_val_from_x 返回值；息屏时间=档位索引）。 */
|
||
static void s_slider_set_from_track(const srow_t *r, int sl_v, int save_now)
|
||
{
|
||
if (!strcmp(r->key, "display.screen_off_timeout")) sl_v = s_time_tier_val(sl_v);
|
||
/* B2b 深色时段滑条：分钟按 15 分钟步进吸附（0-1439，整 15 分钟），避免拖出任意分钟 */
|
||
if (!strcmp(r->key, "display.theme_dark_start") || !strcmp(r->key, "display.theme_dark_end")) {
|
||
sl_v = ((sl_v + 7) / 15) * 15;
|
||
if (sl_v < 0) sl_v = 0;
|
||
if (sl_v > 1439) sl_v = 1439;
|
||
}
|
||
s_set_int_value(r, sl_v, save_now);
|
||
}
|
||
|
||
|
||
/* 滑条拖动值域映射：x（屏幕坐标）→ value，基于布局常量 S_SLIDER_X/W。
|
||
* 所有滑条行共用同一 track 几何，故任意滑条行都能正确映射。 */
|
||
static int s_slider_val_from_x(const srow_t *r, int px)
|
||
{
|
||
int range = r->max - r->min;
|
||
int v = r->min + (range ? (px - S_SLIDER_X) * range / S_SLIDER_W : 0);
|
||
if (v < r->min) v = r->min;
|
||
if (v > r->max) v = r->max;
|
||
return v;
|
||
}
|
||
|
||
|
||
/* ---- 绘制设置页（整页画进 SDK back_buf；调用方再 meow_dirty_add 局部 + flush）---- */
|
||
static void draw_settings_page(int sel, int scroll_off)
|
||
{
|
||
const meow_ui_theme_t *th = s_ui_theme();
|
||
int W = fb_xres, H = fb_yres;
|
||
fill_rect(0, 0, W, H, th->surface);
|
||
draw_statusbar(); /* Stage-One：驱动 SDK 全局状态栏（喂数据+标脏顶条） */
|
||
if (mfont_ready) ui_draw(24, 50, "系统设置", th->on_surface, 28);
|
||
else draw_text(24, 30, "SETTINGS", 3, th->on_surface);
|
||
fill_rect(0, 50 + (mfont_ready ? meow_font_line_height(28) : 24) + 2, W, 2, th->outline);
|
||
|
||
/* M2.38 Bug5：整屏背景替代带圆角的单张卡片（用户反馈圆角非全屏底很怪）。
|
||
* 内容区从 SET_CARD_Y 起整屏 fill surface_variant、去圆角、满宽直到屏幕底；
|
||
* 状态栏(0-28)与标题区(28-92)仍为 surface，标题/分隔线/分组 outline/选中高亮/滚动条布局不变。 */
|
||
fill_rect(0, SET_CARD_Y, W, H - SET_CARD_Y, th->surface_variant);
|
||
|
||
int clip_top = SET_CONTENT_Y, clip_bot = SET_CONTENT_BOT;
|
||
s_sel_track_y = -1;
|
||
for (int i = 0; i < SMENU_N; i++) {
|
||
int pos = s_vis_of(i);
|
||
if (pos < 0) continue; /* 隐藏行（多字体关闭时 6 个 class 行） */
|
||
int sy = SET_CONTENT_Y + pos * SROW_H - scroll_off;
|
||
if (sy + SROW_H < clip_top || sy >= clip_bot) continue; /* 视野外行跳过（配滚动） */
|
||
const srow_t *r = &SMENU[i];
|
||
int selected = (i == sel);
|
||
if (selected)
|
||
meow_ui_fill_rect_alpha(SET_CARD_X + 4, sy, SET_CARD_W - 8, SROW_H, th->primary, 34);
|
||
meow_ui_fill_rect(SET_CARD_X + 12, sy + SROW_H - 1, SET_CONTENT_W, 1, th->outline);
|
||
|
||
if (r->ctrl == SC_HEADER) {
|
||
ui_draw(SET_CARD_X + 16, sy + 14, r->label, th->on_surface_variant, 18);
|
||
} else if (r->ctrl == SC_SWITCH) {
|
||
ui_draw(SET_CARD_X + 16, sy + (SROW_H - meow_font_line_height(22)) / 2, r->label,
|
||
th->on_surface, 22);
|
||
int on = 0; meow_settings_get_switch(r->key, &on);
|
||
s_draw_switch(SET_CARD_X + SET_CARD_W - 16 - 48, sy + (SROW_H - 28) / 2, on, th);
|
||
} else if (r->ctrl == SC_SLIDER) {
|
||
int ly = sy + (SROW_H - meow_font_line_height(22)) / 2 - 6; /* 标题略上移，给下方滑条留位 */
|
||
ui_draw(SET_CARD_X + 16, ly, r->label, th->on_surface, 22);
|
||
char vb[32]; s_fmt_value(r, vb, sizeof vb);
|
||
ui_draw(SET_CARD_X + SET_CARD_W - 16 - ui_width(vb, 22), ly, vb, th->on_surface_variant, 22);
|
||
int v = 0; meow_settings_get_int(r->key, &v);
|
||
/* 息屏时间为档位索引型：把秒换算成档位索引再画（各档等距，便于触摸对位）；
|
||
* 其余滑条防御性 clamp 到 [min,max]，防止后端暂存值越界（如 brightness 旧值 101
|
||
* 在画时被 clamp 到 100，thumb 不冲出 track）。 */
|
||
if (!strcmp(r->key, "display.screen_off_timeout")) v = s_time_tier_idx(v);
|
||
else {
|
||
if (v < r->min) v = r->min;
|
||
if (v > r->max) v = r->max;
|
||
}
|
||
int tyy = sy + 40;
|
||
s_draw_slider(S_SLIDER_X, tyy, S_SLIDER_W, v, r->min, r->max, th);
|
||
if (selected) s_sel_track_y = tyy;
|
||
} else if (r->ctrl == SC_INFO) { /* M2.39 只读动态信息（如 WiFi 连接 SSID） */
|
||
int ly = sy + (SROW_H - meow_font_line_height(22)) / 2;
|
||
ui_draw(SET_CARD_X + 16, ly, r->label, th->on_surface, 22);
|
||
char vb[48]; s_net_get(r, vb, sizeof vb);
|
||
int vx = SET_CARD_X + SET_CARD_W - 16 - ui_width(vb, 22);
|
||
ui_draw(vx, ly, vb, th->on_surface_variant, 22);
|
||
} else if (r->ctrl == SC_LIST) { /* M2.39 网络列表行：摘要 + 右向展开提示 */
|
||
int ly = sy + (SROW_H - meow_font_line_height(22)) / 2;
|
||
ui_draw(SET_CARD_X + 16, ly, r->label, th->on_surface, 22);
|
||
char vb[48]; s_net_get(r, vb, sizeof vb);
|
||
int vx = SET_CARD_X + SET_CARD_W - 16 - 12 - ui_width(vb, 22); /* 给右向 chevron 留位 */
|
||
ui_draw(vx, ly, vb, th->on_surface_variant, 22);
|
||
s_draw_chevron(SET_CARD_X + SET_CARD_W - 16, sy + SROW_H / 2, th->on_surface_variant);
|
||
} else { /* SC_ENUM / SC_PRESET */
|
||
int ly = sy + (SROW_H - meow_font_line_height(22)) / 2;
|
||
ui_draw(SET_CARD_X + 16, ly, r->label, th->on_surface, 22);
|
||
char vb[40]; s_display_value(r, vb, sizeof vb);
|
||
int vx = SET_CARD_X + SET_CARD_W - 16 - ui_width(vb, 22);
|
||
ui_draw(vx, ly, vb, th->on_surface_variant, 22);
|
||
s_draw_chevron(vx - 8, sy + SROW_H / 2, th->on_surface_variant);
|
||
}
|
||
}
|
||
|
||
/* 滚动条（内容超出视口时显示 thumb；on_surface_variant 弱化） */
|
||
int vis_total = s_vis_count() * SROW_H;
|
||
if (vis_total > SET_CONTENT_H) {
|
||
int total = vis_total;
|
||
int thumb_h = SET_CONTENT_H * SET_CONTENT_H / total;
|
||
if (thumb_h < 24) thumb_h = 24;
|
||
int th_y = SET_CONTENT_Y + (SET_CONTENT_H - thumb_h) * scroll_off / (total - SET_CONTENT_H);
|
||
meow_gfx_fill_round(fb_xres - 12, SET_CONTENT_Y, 5, SET_CONTENT_H, 3, th->surface_container);
|
||
meow_gfx_fill_round(fb_xres - 12, th_y, 5, thumb_h, 3, th->on_surface_variant);
|
||
}
|
||
|
||
/* 底部：返回提示（左）+ 版本号（右），复用应用列表底部对齐逻辑。
|
||
* M2.39：返回按钮改用像素左向箭头 + 「返回」——点阵回退字库缺少 '‹' 字形，
|
||
* 原 「‹ 返回」在 !mfont_ready 时 '‹' 渲染成方框。 */
|
||
{
|
||
char ver[32];
|
||
snprintf(ver, sizeof ver, "MeowOS v%s dev", g_meowos_version);
|
||
int foot_y = fb_yres - meow_font_line_height(20) - 8;
|
||
s_draw_chevron_left(SET_CARD_X + 12, foot_y + meow_font_line_height(20) / 2, th->on_surface_variant);
|
||
ui_draw(SET_CARD_X + 24, foot_y, "返回", th->on_surface_variant, 20);
|
||
ui_draw(fb_xres - 8 - ui_width(ver, 20), foot_y, ver, th->outline, 20);
|
||
}
|
||
}
|
||
|
||
|
||
/* M2.5x 多字体：class 行下拉的「跟随全局」选项（值=空串）在 write 路径经此映射回真实存储值。 */
|
||
static const char *s_preset_value(const srow_t *r, int pick)
|
||
{
|
||
int is_cls = r->key && !strncmp(r->key, "font.class_", 11);
|
||
if (is_cls) {
|
||
if (pick == 0) return ""; /* 跟随全局 font.file */
|
||
pick--;
|
||
}
|
||
int pn = 0;
|
||
const char *const *pps = s_row_presets(r, &pn);
|
||
if (pick < 0 || pick >= pn) return is_cls ? "" : (pps && pn > 0 ? pps[0] : "");
|
||
return pps[pick];
|
||
}
|
||
|
||
|
||
/* ---- 选择器子对话框（MD3 §3.3：居中圆角卡片，列选项；中文标签）----
|
||
* ENUM 用 meow_settings_enum_names/enum_label；PRESET 用本地预设表。
|
||
* 返回选中索引；取消返回 -1。阻塞（自开输入设备）。
|
||
* M2.39：modal 核心抽到 s_dd_modal（网络列表复用），本函数只负责组装选项数组。 */
|
||
static int s_dropdown(const srow_t *r)
|
||
{
|
||
int n = 0, cur = 0;
|
||
const char *names[8];
|
||
char labels[8][48];
|
||
const char *item[S_NET_MAX];
|
||
if (r->ctrl == SC_ENUM) {
|
||
int kn = 0;
|
||
meow_settings_enum_names(r->key, names, &kn);
|
||
n = kn;
|
||
if (n > S_NET_MAX) n = S_NET_MAX;
|
||
for (int i = 0; i < n; i++) {
|
||
meow_settings_enum_label(r->key, i, labels[i], sizeof labels[i]);
|
||
item[i] = labels[i];
|
||
}
|
||
int ci = 0; meow_settings_get_enum(r->key, &ci); cur = ci;
|
||
} else {
|
||
char cstr[MEOW_SET_MAX_LEN];
|
||
meow_settings_get_str(r->key, cstr, sizeof cstr);
|
||
int pn = 0;
|
||
const char *const *pps = s_row_presets(r, &pn);
|
||
int is_cls = r->key && !strncmp(r->key, "font.class_", 11);
|
||
int base = is_cls ? 1 : 0; /* class 行 0 号留给「跟随全局」 */
|
||
int cnt = pn; if (cnt > S_NET_MAX - base) cnt = S_NET_MAX - base;
|
||
n = base + cnt;
|
||
if (is_cls) {
|
||
names[0] = "";
|
||
snprintf(labels[0], sizeof labels[0], "跟随全局字体");
|
||
item[0] = labels[0];
|
||
if (!cstr[0]) cur = 0;
|
||
}
|
||
for (int i = 0; i < cnt; i++) {
|
||
names[base + i] = pps[i];
|
||
snprintf(labels[base + i], sizeof labels[base + i], "%s",
|
||
(r->preset_labels && r->preset_labels[i][0]) ? r->preset_labels[i] : pps[i]);
|
||
item[base + i] = labels[base + i];
|
||
if (!strcmp(pps[i], cstr)) cur = base + i;
|
||
}
|
||
}
|
||
if (n <= 0) return -1;
|
||
if (cur < 0 || cur >= n) cur = 0;
|
||
return s_dd_modal(r->label, item, n, cur);
|
||
}
|
||
|
||
|
||
/* ---- 通用选择器下拉模态（MD3 §3.3：居中圆角卡片，列选项）----
|
||
* title=标题；item[i]=第 i 项显示文本；n=项数（≤S_NET_MAX）；cur=当前值下标（画勾选）。
|
||
* 返回选中下标；取消/点卡片外返回 -1。阻塞（自开输入设备）。
|
||
* s_dropdown（设置项 enum/preset）与 s_net_open（网络列表）共用。
|
||
* M2.40：触摸命中判定改在抬手用抬手时刻最新 abs 坐标（见循环内注释），修「点选项无反应」。
|
||
* 说明：模态内部仍保留音量键=移动选项高亮（这是「选值」不是「设置页列表光标」，属另一语义，
|
||
* 与 M2.39 仅移除 run_settings_page 列表光标移动的约束不冲突）。 */
|
||
/* 绘制下拉/关于本机模态：全屏压暗 + 居中圆角卡片 + 标题 + 可见行（按 dd_scroll 裁剪，视口外整行跳过）。 */
|
||
static void dd_modal_paint(const meow_ui_theme_t *th, int W, int H, int d_x, int d_y,
|
||
int d_w, int d_h, int title_h, int opt_row, const char *title,
|
||
const char **item, int n, int sel, int cur,
|
||
int content_top, int content_bot, int dd_scroll)
|
||
{
|
||
meow_ui_fill_rect_alpha(0, 0, W, H, 0x000000, 150);
|
||
meow_gfx_fill_round(d_x, d_y, d_w, d_h, 16, th->surface_container);
|
||
meow_ui_draw_rect_round(d_x, d_y, d_w, d_h, 16, th->outline);
|
||
if (mfont_ready) ui_draw(d_x + 18, d_y + 8, title, th->on_surface, 20);
|
||
else draw_text(d_x + 18, d_y + 8, title, 2, th->on_surface);
|
||
for (int i = 0; i < n; i++) {
|
||
int ry = d_y + title_h + i * opt_row - dd_scroll;
|
||
if (ry + opt_row < content_top || ry >= content_bot) continue; /* 视口外整行跳过（配滚动） */
|
||
int cur_sel = (i == sel);
|
||
if (cur_sel) meow_ui_fill_rect_alpha(d_x + 4, ry, d_w - 8, opt_row, th->primary, 36);
|
||
ui_draw(d_x + 18, ry + (opt_row - meow_font_line_height(20)) / 2, item[i] ? item[i] : "",
|
||
cur_sel ? 0xFFFFFF : th->on_surface, 20);
|
||
if (i == cur) meow_ui_fill_rect(d_x + d_w - 28, ry + (opt_row - 12) / 2, 12, 12, th->primary);
|
||
}
|
||
}
|
||
|
||
int s_dd_modal(const char *title, const char *item[S_NET_MAX], int n, int cur)
|
||
{
|
||
int sel = cur;
|
||
const meow_ui_theme_t *th = s_ui_theme();
|
||
int W = fb_xres, H = fb_yres;
|
||
int opt_row = 48, pad = 20, title_h = 40;
|
||
/* M2.5x 关于本机：内容超高（13 行）时把卡片高钳到屏内，内容区允许滚动（复用设置页列滚动语义）。 */
|
||
int raw_d_h = title_h + n * opt_row + pad;
|
||
int max_card_h = H - SB_BAR_H - 20; /* 卡片可视高上限（不压状态栏、留底边） */
|
||
int scrollable = (raw_d_h > max_card_h);
|
||
int d_h = scrollable ? max_card_h : raw_d_h;
|
||
int d_w = 348, d_x = (W - d_w) / 2, d_y = (H - d_h) / 2;
|
||
if (d_y < SB_BAR_H) d_y = SB_BAR_H; /* 下拉不压状态栏（栏高 40→28，随常量） */
|
||
if (H - d_y - d_h < 20) d_y = H - d_h - 20;
|
||
/* 内容可视区（卡片体内、标题下、底部内边距上）；dd_scroll 仅在 scrollable 时非 0。 */
|
||
int content_top = d_y + title_h;
|
||
int content_bot = d_y + d_h - pad;
|
||
int dd_view_h = content_bot - content_top;
|
||
int dd_scroll_max = scrollable ? (n * opt_row - dd_view_h) : 0;
|
||
if (dd_scroll_max < 0) dd_scroll_max = 0;
|
||
int dd_scroll = 0;
|
||
int swipe_inv = 0;
|
||
if (scrollable) meow_settings_get_switch("input.swipe_invert", &swipe_inv);
|
||
|
||
struct keypoll kp_power, kp_keys;
|
||
kp_open(&kp_power, DEV_POWER); kp_open(&kp_keys, DEV_KEYS);
|
||
struct kd_state kd_vold, kd_volu, kd_pwr;
|
||
memset(&kd_vold, 0, sizeof kd_vold); memset(&kd_volu, 0, sizeof kd_volu); memset(&kd_pwr, 0, sizeof kd_pwr);
|
||
int m_prev_vold = 0, m_prev_volu = 0, m_prev_pwr = 0;
|
||
for (int w = 0; w < KEYBUF_WORDS; w++) {
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEDOWN % 32))) m_prev_vold = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEUP % 32))) m_prev_volu = 1;
|
||
if (kp_power.cur[w] & (1UL << (KEY_POWER % 32))) m_prev_pwr = 1;
|
||
}
|
||
int tfd = open(DEV_TOUCH, O_RDONLY | O_NONBLOCK);
|
||
if (tfd >= 0) {
|
||
/* M2.37：彻底清空「打开下拉」这次触摸的残留边沿。goodix 的抬起序列（ABS 坐标/
|
||
* BTN_TOUCH=0/MT_TRACKING=-1）在开 fd 后仍可能陆续送达，若只清空一次，第一轮
|
||
* 下拉循环会读到这些残边 → 误判抬起/选项错位/点卡片外穿透。故 排空→短延时→再排空。 */
|
||
unsigned char ev[16];
|
||
while (read(tfd, ev, sizeof ev) == 16) {}
|
||
usleep(40000); /* M2.38 Bug3：排空→40ms→再排空，吸收 goodix 抬起序列长尾 */
|
||
while (read(tfd, ev, sizeof ev) == 16) {}
|
||
}
|
||
int pwr_pending = 0;
|
||
int result = -1;
|
||
int dlx = -1, dly = -1, dtd = 0; /* 下拉触摸解析（dlx/dly=最新有效坐标；dtd=已按下） */
|
||
/* M2.5x 滚动状态（仅 scrollable 生效；非滚动路径与原文一致） */
|
||
int dd_oy = -1; /* 按下原点纵坐标（首个有效 ABS 后锁） */
|
||
int dd_scrolling = 0; /* 本次手势是否已判为纵向滚动 */
|
||
int dd_scroll_base = 0; /* 进入滚动时锁定的 dd_scroll 基准（连续跟手） */
|
||
int sel_moved = 0; /* 音量键改变了 sel（滚动需跟随选中行） */
|
||
/* M2.40：不再锁按下时刻的 ddx/ddy —— goodix 时序 BTN_TOUCH 先于 ABS，按下边沿时坐标可能
|
||
* 还是 -1/上一手势残留，锁原点会把点击判成「点卡片外=取消」。命中改在抬手时用抬手时刻的
|
||
* dlx/dly（抬起时必已更新到本次最新有效坐标），与 meow_touch mt_up 语义同源。 */
|
||
|
||
/* 初始绘制：全屏压暗覆盖层 + 居中圆角卡片 + 可见行（按 dd_scroll 裁剪） */
|
||
dd_modal_paint(th, W, H, d_x, d_y, d_w, d_h, title_h, opt_row, title, item, n,
|
||
sel, cur, content_top, content_bot, dd_scroll);
|
||
meow_dirty_full(); meow_ui_flush();
|
||
|
||
for (;;) {
|
||
if (sigterm_flag) { result = -1; break; }
|
||
kp_poll(&kp_power, NULL, NULL); kp_poll(&kp_keys, NULL, NULL);
|
||
int vold = 0, volu = 0, pwr = 0;
|
||
for (int w = 0; w < KEYBUF_WORDS; w++) {
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEDOWN % 32))) vold = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEUP % 32))) volu = 1;
|
||
if (kp_power.cur[w] & (1UL << (KEY_POWER % 32))) pwr = 1;
|
||
}
|
||
(void)kd_tick(&kd_vold, vold); (void)kd_tick(&kd_volu, volu); (void)kd_tick(&kd_pwr, pwr);
|
||
vold = kd_vold.stable; volu = kd_volu.stable; pwr = kd_pwr.stable;
|
||
int need = 0;
|
||
if (vold && !m_prev_vold && sel < n - 1) { sel++; need = 1; sel_moved = 1; }
|
||
if (volu && !m_prev_volu && sel > 0) { sel--; need = 1; sel_moved = 1; }
|
||
if (pwr && !m_prev_pwr) pwr_pending = 1; /* 按下：待抬起确认 */
|
||
if (!pwr && m_prev_pwr && pwr_pending) { pwr_pending = 0; result = sel; break; } /* 抬起=确认 */
|
||
m_prev_vold = vold; m_prev_volu = volu; m_prev_pwr = pwr;
|
||
|
||
/* 触摸：抬起命中选项=确认，点卡片外=取消 */
|
||
if (tfd >= 0) {
|
||
struct pollfd pfd = { tfd, POLLIN, 0 };
|
||
if (poll(&pfd, 1, 0) > 0) {
|
||
unsigned char ev[16];
|
||
while (read(tfd, ev, sizeof ev) == 16) {
|
||
uint16_t type = *(uint16_t *)(ev + 8), code = *(uint16_t *)(ev + 10);
|
||
int32_t val = *(int32_t *)(ev + 12);
|
||
if (type == EV_ABS) {
|
||
if (code == ABS_X || code == ABS_MT_POSITION_X) dlx = val;
|
||
else if (code == ABS_Y || code == ABS_MT_POSITION_Y) {
|
||
dly = val;
|
||
if (dtd) {
|
||
if (dd_oy < 0) dd_oy = val; /* 首个有效纵坐标 = 按下原点 */
|
||
if (scrollable) {
|
||
int ddy = val - dd_oy; /* 手指纵向位移（正=下移） */
|
||
if (!dd_scrolling && (ddy > S_SCROLL_SLOP || ddy < -S_SCROLL_SLOP)) {
|
||
dd_scrolling = 1;
|
||
dd_scroll_base = dd_scroll; /* 触发瞬间锁基准，不跳变 */
|
||
}
|
||
if (dd_scrolling) {
|
||
/* 标准方向：手指上移(ddy<0)→内容上移/看下方→scroll 增；swipe_invert 反向 */
|
||
int t = dd_scroll_base + (swipe_inv ? ddy : -ddy);
|
||
if (t < 0) t = 0;
|
||
if (t > dd_scroll_max) t = dd_scroll_max;
|
||
if (t != dd_scroll) { dd_scroll = t; need = 1; }
|
||
}
|
||
}
|
||
}
|
||
}
|
||
} else if (type == EV_KEY && code == BTN_TOUCH) {
|
||
if (val) {
|
||
/* 按下边沿：只标「已按下」，绝不锁原点（goodix 时序 BTN_TOUCH 先于
|
||
* ABS，此刻 dlx/dly 可能还是 -1 或上一手势残留）。 */
|
||
dtd = 1; dd_oy = -1; dd_scrolling = 0;
|
||
} else if (dtd) {
|
||
dtd = 0;
|
||
/* 抬手判定：此刻 dlx/dly 必为本次最新有效坐标（抬起时 ABS 已先到）。
|
||
* 卡片内命中 → 返回选项下标；卡片外 → 取消(-1)；从未见有效坐标 → 丢弃。
|
||
* M2.5x：滚动手势抬手不选（不 launch）；命中行换算叠加 dd_scroll。 */
|
||
if (dd_scrolling) {
|
||
dd_scrolling = 0;
|
||
} else if (dlx >= 0 && dly >= 0) {
|
||
if (dlx >= d_x && dlx < d_x + d_w && dly >= d_y && dly < d_y + d_h) {
|
||
int i = (dly - d_y - title_h + dd_scroll) / opt_row;
|
||
if (i >= 0 && i < n) { sel = i; result = sel; goto ddone; }
|
||
/* 卡片内但落在标题/内边距：保持弹出态，等待下一次点选 */
|
||
} else {
|
||
result = -1; goto ddone; /* 点卡片外=取消 */
|
||
}
|
||
}
|
||
/* dlx/dly 为 -1：ghost/残留抬手，丢弃不动作 */
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
if (need) {
|
||
/* 重绘覆盖层+选项（仅 sel 高亮/滚动变化）；sel 经音量键移动时滚动跟随选中行。 */
|
||
if (sel_moved && scrollable) {
|
||
int ry0 = content_top + sel * opt_row - dd_scroll;
|
||
if (ry0 < content_top) dd_scroll = sel * opt_row;
|
||
else if (ry0 + opt_row > content_bot) dd_scroll = sel * opt_row - (dd_view_h - opt_row);
|
||
if (dd_scroll < 0) dd_scroll = 0;
|
||
if (dd_scroll > dd_scroll_max) dd_scroll = dd_scroll_max;
|
||
}
|
||
sel_moved = 0;
|
||
dd_modal_paint(th, W, H, d_x, d_y, d_w, d_h, title_h, opt_row, title, item, n,
|
||
sel, cur, content_top, content_bot, dd_scroll);
|
||
meow_dirty_full(); meow_ui_flush();
|
||
}
|
||
usleep(POLL_MS * 1000);
|
||
}
|
||
ddone:
|
||
if (tfd >= 0) close(tfd);
|
||
kp_close(&kp_power); kp_close(&kp_keys);
|
||
return result;
|
||
}
|
||
|
||
|
||
/* 三级 (family,weight) 下多 tier 的选档偏好分（越大越优先；设置页写 font.file/class 值用）。
|
||
* 关（font.load_full=0）→ common 优先（回退 gbk→full）；开 → gbk 优先（回退 full→common）。 */
|
||
static int font_tier_pick_rank(const char *tier, int load_full)
|
||
{
|
||
int is_common = tier && !strcmp(tier, "common");
|
||
int is_gbk = tier && !strcmp(tier, "gbk");
|
||
int is_full = tier && !strcmp(tier, "full");
|
||
if (!load_full) {
|
||
if (is_common) return 3;
|
||
if (is_gbk) return 2;
|
||
if (is_full) return 1;
|
||
return 0;
|
||
}
|
||
if (is_gbk) return 3;
|
||
if (is_full) return 2;
|
||
if (is_common) return 1;
|
||
return 0;
|
||
}
|
||
|
||
|
||
/* ---- 字体行「family→字重」两级子菜单（M2.6 字重结构；M2.8 三级适配）----
|
||
* 一级：列出扫描到的去重 family（class 行首项「跟随全局」=空值）；选 family 后自动进入
|
||
* 二级：该 family 的可用字重（regular/bold/italic…）。选中写 out_val = 卡根相对路径
|
||
* MeowOS/fonts/<family>/<weight>/font.png（两级）或 .../<family>/<weight>/<tier>/font.png（三级，
|
||
* 或 class 行「跟随全局」=空串）。
|
||
* M2.8 三级冲突：同 (family,weight) 出现多个 tier → 选择器仍为 family→weight 两级、不新增 tier
|
||
* 级菜单；每 weight 只显一行（代表 = 按「当前加载大字库」开关选档：关=common 优先、开=gbk 优先，
|
||
* 见 font_tier_pick_rank），写值 = 该代表 tier 的卡根相对路径。
|
||
* 复用 s_dd_modal（与 WiFi/关于 同款模态）。返回 1=已选中（out_val 已填），0=取消。 */
|
||
static int s_font_dropdown(const srow_t *r, char *out_val, int vlen)
|
||
{
|
||
if (!r) return 0;
|
||
int is_cls = r->key && !strncmp(r->key, "font.class_", 11);
|
||
char cur[MEOW_SET_MAX_LEN];
|
||
meow_settings_get_str(r->key, cur, sizeof cur);
|
||
char curfam[64] = "", curwt[32] = "";
|
||
if (cur[0])
|
||
font_family_weight_from_png(cur, curfam, sizeof curfam, curwt, sizeof curwt);
|
||
|
||
/* ---- 一级：去重 family 列表（class 行首项「跟随全局」）---- */
|
||
char fam_slug[S_NET_MAX][64], fam_disp[S_NET_MAX][64];
|
||
int famn = 0;
|
||
if (is_cls) {
|
||
if (famn < S_NET_MAX) { snprintf(fam_slug[famn], sizeof fam_slug[0], "");
|
||
snprintf(fam_disp[famn], sizeof fam_disp[0], "跟随全局字体"); famn++; }
|
||
}
|
||
for (int i = 0; i < font_presets_n && famn < S_NET_MAX; i++) {
|
||
const char *f = font_preset_fams[i] ? font_preset_fams[i] : "";
|
||
int dup = 0;
|
||
for (int k = 0; k < famn; k++) if (!strcmp(fam_slug[k], f)) { dup = 1; break; }
|
||
if (dup) continue;
|
||
snprintf(fam_slug[famn], sizeof fam_slug[0], "%s", f);
|
||
snprintf(fam_disp[famn], sizeof fam_disp[0], "%s",
|
||
(font_preset_names[i] && font_preset_names[i][0]) ? font_preset_names[i] : f);
|
||
famn++;
|
||
}
|
||
if (famn <= 0) return 0;
|
||
const char *fitem[S_NET_MAX];
|
||
char ftext[S_NET_MAX][64];
|
||
for (int i = 0; i < famn; i++) { snprintf(ftext[i], sizeof ftext[i], "%s", fam_disp[i]); fitem[i] = ftext[i]; }
|
||
int cur_fam = is_cls ? 0 : -1;
|
||
for (int i = is_cls ? 1 : 0; i < famn; i++)
|
||
if (curfam[0] && !strcmp(fam_slug[i], curfam)) cur_fam = i;
|
||
int pick = s_dd_modal(r->label, fitem, famn, cur_fam);
|
||
if (pick < 0) return 0;
|
||
if (is_cls && pick == 0) { snprintf(out_val, vlen, ""); return 1; } /* 跟随全局 */
|
||
const char *fam = fam_slug[pick];
|
||
|
||
/* ---- 二级：该 family 的字重列表（去重：同 (family,weight) 只显一行）----
|
||
* 三级结构下同 (family,weight) 出现多个 tier（common/gbk/full）→ 不新增 tier 级菜单，按
|
||
* 「当前加载大字库」开关定档：关=common 优先、开=gbk 优先（font_tier_pick_rank）。 */
|
||
int load_full = 0;
|
||
meow_settings_get_switch("font.load_full", &load_full);
|
||
char wt_pick[S_NET_MAX][32]; /* 该行代表的 weight slug */
|
||
int wt_rank[S_NET_MAX]; /* 该行当前档位偏好分（保留最高分 tier 为行代表） */
|
||
char wt_val[S_NET_MAX][MEOW_SET_MAX_LEN];
|
||
char wt_text[S_NET_MAX][96];
|
||
int wn = 0;
|
||
for (int i = 0; i < font_presets_n; i++) {
|
||
if (!font_preset_fams[i] || strcmp(font_preset_fams[i], fam)) continue;
|
||
const char *wt = font_preset_wts[i] ? font_preset_wts[i] : "regular";
|
||
const char *tier = font_preset_tiers[i] ? font_preset_tiers[i] : "common";
|
||
int rank = font_tier_pick_rank(tier, load_full);
|
||
int slot = -1;
|
||
for (int k = 0; k < wn; k++) if (!strcmp(wt_pick[k], wt)) { slot = k; break; }
|
||
if (slot < 0) {
|
||
if (wn >= S_NET_MAX) break;
|
||
snprintf(wt_pick[wn], sizeof wt_pick[0], "%s", wt);
|
||
wt_rank[wn] = -1;
|
||
slot = wn; wn++;
|
||
}
|
||
if (rank > wt_rank[slot]) { /* 保留档位偏好最高的一套作为该 weight 行代表 */
|
||
wt_rank[slot] = rank;
|
||
snprintf(wt_val[slot], sizeof wt_val[0], "%s", font_presets[i]);
|
||
snprintf(wt_text[slot], sizeof wt_text[0], "%s", font_preset_labels[i]);
|
||
}
|
||
}
|
||
if (wn <= 0) return 0; /* 该 family 无字重（理论不出现：能进 family 必已探到字重） */
|
||
const char *witem[S_NET_MAX];
|
||
for (int i = 0; i < wn; i++) witem[i] = wt_text[i];
|
||
/* 当前位置高亮：按当前 font.file 的 (family,weight) 命中所显示 weight 行（不依赖 tier 精确匹配，
|
||
* 因三级下 font.file 具体 tier 可能与该行代表 tier 不同）。 */
|
||
int cur_wt = -1;
|
||
{
|
||
char cfam2[64] = "", cwt2[32] = "";
|
||
if (cur[0]) font_family_weight_from_png(cur, cfam2, sizeof cfam2, cwt2, sizeof cwt2);
|
||
for (int i = 0; i < wn; i++)
|
||
if (cwt2[0] && !strcmp(wt_pick[i], cwt2)) { cur_wt = i; break; }
|
||
}
|
||
int wp = s_dd_modal(r->label, witem, wn, cur_wt);
|
||
if (wp < 0) return 0;
|
||
snprintf(out_val, vlen, "%s", wt_val[wp]);
|
||
return 1;
|
||
}
|
||
|
||
|
||
/* ---- 运行设置页（独立子循环；run_menu 触摸命中设置行后调用）---- */
|
||
void run_settings_page(void)
|
||
{
|
||
int sel = s_first_setting();
|
||
int scroll_off = 0;
|
||
int H = fb_yres;
|
||
|
||
/* M2.6：进设置页扫描一次 TF 卡 MeowOS/fonts/<family>/<weight>/，刷新「字体文件」下拉。
|
||
* 进设置时卡通常在位；此步只枚举/校验，不加载（加载由 meow_font_ensure 按 font.file 决定）。 */
|
||
meow_font_scan_presets();
|
||
|
||
struct keypoll kp_power, kp_keys;
|
||
kp_open(&kp_power, DEV_POWER); kp_open(&kp_keys, DEV_KEYS);
|
||
struct kd_state kd_vold, kd_volu, kd_play, kd_pwr;
|
||
memset(&kd_vold, 0, sizeof kd_vold); memset(&kd_volu, 0, sizeof kd_volu);
|
||
memset(&kd_play, 0, sizeof kd_play); memset(&kd_pwr, 0, sizeof kd_pwr);
|
||
int m_prev_vold = 0, m_prev_volu = 0, m_prev_play = 0, m_prev_pwr = 0;
|
||
for (int w = 0; w < KEYBUF_WORDS; w++) {
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEDOWN % 32))) m_prev_vold = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEUP % 32))) m_prev_volu = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_PLAYPAUSE % 32))) m_prev_play = 1;
|
||
if (kp_power.cur[w] & (1UL << (KEY_POWER % 32))) m_prev_pwr = 1;
|
||
}
|
||
int tfd = open(DEV_TOUCH, O_RDONLY | O_NONBLOCK);
|
||
if (tfd >= 0) { unsigned char ev[16]; while (read(tfd, ev, sizeof ev) == 16) {} }
|
||
unsigned long long touch_cooldown_until = now_ms() + 300;
|
||
unsigned long long last_tick = now_ms();
|
||
unsigned long long last_act = now_ms(); /* 最近一次交互时间（自动息屏用） */
|
||
int after_modal = 0; /* 选择器子对话框刚关闭：其全屏 dim 覆盖过状态栏，需整帧重绘还原 */
|
||
|
||
/* 触摸拖动滑条状态 */
|
||
int td = 0, td_ok = 0, tdx = -1, tdy = -1, tlx = -1, tly = -1;
|
||
int drag = -1; /* 被拖动的行索引；-1=无 */
|
||
/* M2.37 列表拖动滚动状态 */
|
||
int scroll_drag = 0; /* 是否处于列表拖动滚动手势 */
|
||
int scroll_base = 0; /* 进入滚动时对应的 scroll_off 基准（连续跟手） */
|
||
int scroll_y0 = 0; /* 按下原点纵向坐标 */
|
||
int scroll_invert = 0; /* M2.38 Bug4：滑动方向切换（input.swipe_invert；0=标准方向） */
|
||
int sel_changed = 0; /* 本轮是否改变了选中行（仅此场景才强制选中行可见） */
|
||
int wake_suppress = 0; /* 自动息屏唤醒后：吸收唤醒键边沿，待全部抬起再接管 */
|
||
/* M2.x（KEY_CONTROL_DESIGN §2）电源键状态：设置页电源键 = 系统级语义（非返回），
|
||
* 对照主界面 run_menu 3130-3137 的同名变量。单击=息屏/亮屏、长按=电源菜单、8s=强关。 */
|
||
unsigned long long pwr_hold_at = 0; /* 本次电源按下计时起点 */
|
||
int pwr_menu_state = 0; /* 是否已因此次 hold 弹过电源菜单 */
|
||
int pwr_woke = 0; /* 本次按下=自动息屏唤醒（释放只唤醒不 toggle） */
|
||
int pwr_suppress_click = 0; /* 菜单刚关闭：松开不得误判单击熄屏（M2.34 同款） */
|
||
|
||
/* 首次全帧绘制 */
|
||
s_net_sync_from_sys(); /* M2.39：WiFi/蓝牙开关行同步真实硬件态 + 刷新网络信息缓存 */
|
||
scroll_off = s_clamp_scroll(sel, scroll_off);
|
||
draw_settings_page(sel, scroll_off);
|
||
meow_dirty_full(); meow_ui_flush();
|
||
|
||
for (;;) {
|
||
unsigned long long now = now_ms();
|
||
if (sigterm_flag) break;
|
||
/* 重绘触发：值/选中/滚动变化 */
|
||
int need_paint = 0;
|
||
|
||
/* ---- M2.37 自动息屏态：留在设置页，等待任意输入唤醒，恢复后重绘（不丢上下文）----
|
||
* 对照 run_menu 主循环 meow_auto_slept 的唤醒重绘（M2.17/2.18）。休眠期间仅探测
|
||
* 输入（按键原始按下 / black 模式触摸按下）；一旦唤醒：亮屏、清自动态并整帧重绘。 */
|
||
if (meow_auto_slept && !meow_screen_on) {
|
||
kp_poll(&kp_power, NULL, NULL); kp_poll(&kp_keys, NULL, NULL);
|
||
int wake = 0;
|
||
for (int w = 0; w < KEYBUF_WORDS; w++) {
|
||
if (kp_power.cur[w] & (1UL << (KEY_POWER % 32))) wake = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEDOWN % 32))) wake = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEUP % 32))) wake = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_PLAYPAUSE % 32))) wake = 1;
|
||
}
|
||
if (!wake && screen_off_mode == 1 && tfd >= 0) { /* black 模式：面板仍上电，触摸可唤醒 */
|
||
struct pollfd spfd = { tfd, POLLIN, 0 };
|
||
if (poll(&spfd, 1, 0) > 0) {
|
||
unsigned char ev[16];
|
||
while (read(tfd, ev, sizeof ev) == 16) {
|
||
uint16_t type = *(uint16_t *)(ev + 8), code = *(uint16_t *)(ev + 10);
|
||
int32_t val = *(int32_t *)(ev + 12);
|
||
if (type == EV_KEY && code == BTN_TOUCH && val) wake = 1;
|
||
}
|
||
}
|
||
}
|
||
if (wake) {
|
||
meow_panel_on();
|
||
meow_auto_slept = 0;
|
||
wake_suppress = 1;
|
||
last_act = now_ms();
|
||
/* 重置按键防抖与 m_prev_*（含唤醒键原始态对齐），并丢唤醒的这次触摸 */
|
||
memset(&kd_pwr, 0, sizeof kd_pwr); memset(&kd_vold, 0, sizeof kd_vold);
|
||
memset(&kd_volu, 0, sizeof kd_volu); memset(&kd_play, 0, sizeof kd_play);
|
||
kp_poll(&kp_power, NULL, NULL); kp_poll(&kp_keys, NULL, NULL);
|
||
m_prev_pwr = kp_is_down(&kp_power, KEY_POWER);
|
||
m_prev_vold = kp_is_down(&kp_keys, KEY_VOLUMEDOWN);
|
||
m_prev_volu = kp_is_down(&kp_keys, KEY_VOLUMEUP);
|
||
m_prev_play = kp_is_down(&kp_keys, KEY_PLAYPAUSE);
|
||
touch_cooldown_until = now_ms() + 300;
|
||
td = 0; td_ok = 0; drag = -1; scroll_drag = 0; tlx = tly = -1;
|
||
logmsg("settings: auto screen-off -> input wake, stayed in settings page");
|
||
scroll_off = s_clamp_scroll_range(scroll_off);
|
||
draw_settings_page(sel, scroll_off);
|
||
meow_dirty_full(); meow_ui_flush();
|
||
}
|
||
usleep(POLL_MS * 1000);
|
||
continue;
|
||
}
|
||
|
||
/* ---- 按键 ---- */
|
||
kp_poll(&kp_power, NULL, NULL); kp_poll(&kp_keys, NULL, NULL);
|
||
int vold = 0, volu = 0, play = 0, pwr = 0;
|
||
for (int w = 0; w < KEYBUF_WORDS; w++) {
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEDOWN % 32))) vold = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_VOLUMEUP % 32))) volu = 1;
|
||
if (kp_keys.cur[w] & (1UL << (KEY_PLAYPAUSE % 32))) play = 1;
|
||
if (kp_power.cur[w] & (1UL << (KEY_POWER % 32))) pwr = 1;
|
||
}
|
||
(void)kd_tick(&kd_vold, vold); (void)kd_tick(&kd_volu, volu);
|
||
(void)kd_tick(&kd_play, play); (void)kd_tick(&kd_pwr, pwr);
|
||
vold = kd_vold.stable; volu = kd_volu.stable;
|
||
play = kd_play.stable; pwr = kd_pwr.stable;
|
||
if (wake_suppress) {
|
||
/* 刚被唤醒：吸收唤醒键的边沿，等所有按键完全抬起后再接管动作，
|
||
* 避免「电源唤醒→抬起→被当成电源单击返回」或音量唤醒→误导航。 */
|
||
if (!pwr && !vold && !volu && !play) wake_suppress = 0;
|
||
} else {
|
||
/* M2.39：设置页音量键 = 调系统音量（写 DAC），不做光标移动（用户约束：
|
||
* 设置页仅触摸导航；音量键在电菜单/应用列表的系统级导航保持不动）。
|
||
* 按下边沿即起线性渐变（vol_ramp_begin），下方 vol_ramp_tick 逐 1% 爬 + 刷状态栏。 */
|
||
if (vold && !m_prev_vold) { settings_volume_adj(-settings_volume_step); need_paint = 1; }
|
||
if (volu && !m_prev_volu) { settings_volume_adj(+settings_volume_step); need_paint = 1; }
|
||
/* M2.x（KEY_CONTROL_DESIGN §2/§3）播放键在设置页同样被系统「抓住」：
|
||
* 捕获+日志+消费，不再映射为「返回/确认」（原 play 边沿=break 已删，播放键不再退出设置页）。
|
||
* 仍视为输入（重置自动息屏计时，与主界面 play 的媒体预留/any_input 一致）。 */
|
||
if (play && !m_prev_play) {
|
||
logmsg("settings: play key caught (media-reserved, no exit)");
|
||
last_act = now;
|
||
}
|
||
/* M2.x（KEY_CONTROL_DESIGN §2）电源键 = 系统级语义，对齐主界面 run_menu 3284-3366：
|
||
* 单击（按<长按阈值后松开）= 息屏/亮屏；长按>=longpress_menu_ms = 电源菜单；
|
||
* 按住>=forceoff_ms（且未开过菜单）= 强制关机；自动息屏按下只唤醒。
|
||
* ※ 电源键在设置页不再映射为「返回」——退出只能靠触摸（底部返回按钮 + 左缘左滑）。 */
|
||
if (pwr && !m_prev_pwr) {
|
||
pwr_hold_at = now; pwr_menu_state = 0;
|
||
pwr_suppress_click = 0; /* M2.34：新一次电源按下清除旧的抑制标志 */
|
||
last_act = now; /* 视为输入，防按住期间误触发自动息屏 */
|
||
/* M2.18 Bug 2 同款：按下正落在自动息屏态（auto_slept 且屏已关）→ 本次只做唤醒 */
|
||
if (meow_auto_slept && !meow_screen_on) pwr_woke = 1;
|
||
}
|
||
if (pwr && pwr_hold_at) {
|
||
/* M2.10/M2.11 B/M2.37 同款：8s 强关只在该「按住」从未开过菜单（!pwr_menu_state）
|
||
* 时触发；开过菜单则交给菜单内确认/取消，杜绝「开菜单->取消->仍按住->强关」残留。 */
|
||
if (now - pwr_hold_at >= (unsigned long long)power_forceoff_ms && !pwr_menu_state) {
|
||
if (sim_no_exec) { logmsg("settings pm: [sim-no-exec] POWER HOLD %dms -> would force poweroff", power_forceoff_ms); }
|
||
else { logmsg("settings pm: POWER HOLD %dms -> force poweroff", power_forceoff_ms); meow_power_action(POWER_SHUTDOWN); }
|
||
/* 关机一般不复返；若 reboot 失败返回仍按按住处理（m_prev 由下方统一复写） */
|
||
} else if (now - pwr_hold_at >= (unsigned long long)power_longpress_menu_ms && !pwr_menu_state) {
|
||
pwr_menu_state = 1;
|
||
logmsg("settings pm: POWER HOLD %dms -> show power menu", power_longpress_menu_ms);
|
||
show_power_menu(); /* 动作在函数内 system()；取消则续循环 */
|
||
last_act = now_ms(); /* 菜单返回即视为「刚有输入」，重置自动息屏计时 */
|
||
/* M2.11 B 同款：菜单已关闭。清空按住计时与菜单态，绝不把已互动的 hold 再累计到 8s 强关。 */
|
||
pwr_hold_at = 0; pwr_menu_state = 0; pwr_woke = 0;
|
||
pwr_suppress_click = 1; /* M2.34：菜单返回后抑制本次电源松开被误判单击息屏 */
|
||
/* M2.25 同款：阻塞式 show_power_menu() 期间 kd_* 冻结，m_prev_* 与稳定值可能错配，
|
||
* 重播 kd_* 并以当前 raw 对齐 m_prev_*，杜绝「菜单内触摸点取消->返回后被误判单击息屏」。 */
|
||
memset(&kd_pwr, 0, sizeof kd_pwr);
|
||
memset(&kd_vold, 0, sizeof kd_vold);
|
||
memset(&kd_volu, 0, sizeof kd_volu);
|
||
memset(&kd_play, 0, sizeof kd_play);
|
||
kp_poll(&kp_power, NULL, NULL); kp_poll(&kp_keys, NULL, NULL);
|
||
m_prev_pwr = kp_is_down(&kp_power, KEY_POWER);
|
||
m_prev_vold = kp_is_down(&kp_keys, KEY_VOLUMEDOWN);
|
||
m_prev_volu = kp_is_down(&kp_keys, KEY_VOLUMEUP);
|
||
m_prev_play = kp_is_down(&kp_keys, KEY_PLAYPAUSE);
|
||
after_modal = 1; /* 全屏 dim 覆盖过状态栏，需整帧重绘还原 */
|
||
need_paint = 1;
|
||
/* 已按 raw 对齐 m_prev_*，跳过下方基线复写，防把 raw 值覆盖回旧稳定值 → 假单边沿 */
|
||
goto settings_keys_seeded;
|
||
}
|
||
}
|
||
if (!pwr && m_prev_pwr) {
|
||
/* 松开：短按（<长按阈值且菜单未开）→ 单击 = 息屏/亮屏切换 */
|
||
if (pwr_suppress_click) {
|
||
logmsg("settings pm: power release after power-menu -> no toggle (suppress)");
|
||
} else if (pwr_hold_at && (now - pwr_hold_at < (unsigned long long)power_longpress_menu_ms) && !pwr_menu_state && !pwr_woke) {
|
||
logmsg("settings pm: power single-click -> toggle panel (was %s)", meow_screen_on ? "on" : "off");
|
||
meow_toggle_panel();
|
||
meow_auto_slept = 0; /* M2.17：手动/自动息屏后电源单击唤醒均清自动态 */
|
||
last_act = now_ms();
|
||
need_paint = 1; /* 亮屏重绘 / 息屏留屏（面板已黑，下次亮屏重绘） */
|
||
} else if (pwr_woke) {
|
||
logmsg("settings pm: power release after auto screen-off wake -> no toggle (wake only)");
|
||
}
|
||
pwr_hold_at = 0; pwr_menu_state = 0; pwr_woke = 0;
|
||
pwr_suppress_click = 0; /* M2.34：电源已松开，抑制标志一次性用完即清 */
|
||
}
|
||
}
|
||
/* M2.39：驱动音量线性渐变（长按续爬/松开即止）+ 刷新状态栏 VOL；「音量」行随 need_paint 更新 */
|
||
if (vol_ramp_dir != 0) {
|
||
int held = (vol_ramp_dir > 0) ? volu : vold;
|
||
int going = vol_ramp_tick(held);
|
||
g_sys.vol = settings_volume_get();
|
||
paint_sb_right();
|
||
need_paint = 1;
|
||
if (!going) logmsg("settings vol ramp end -> %d", g_sys.vol);
|
||
}
|
||
m_prev_vold = vold; m_prev_volu = volu; m_prev_play = play; m_prev_pwr = pwr;
|
||
settings_keys_seeded:
|
||
;
|
||
|
||
/* ---- 触摸 ---- */
|
||
if (tfd >= 0 && meow_screen_on) { /* M2.x：手动电源息屏后不处理触摸（与主界面一致，且防屏黑时误退出/误改值） */
|
||
struct pollfd pfd = { tfd, POLLIN, 0 };
|
||
if (poll(&pfd, 1, 0) > 0) {
|
||
unsigned char ev[16];
|
||
while (read(tfd, ev, sizeof ev) == 16) {
|
||
uint16_t type = *(uint16_t *)(ev + 8), code = *(uint16_t *)(ev + 10);
|
||
int32_t val = *(int32_t *)(ev + 12);
|
||
if (type == EV_ABS) {
|
||
if (code == ABS_X || code == ABS_MT_POSITION_X) tlx = val;
|
||
else if (code == ABS_Y || code == ABS_MT_POSITION_Y) tly = val;
|
||
if (td && !td_ok && tlx >= 0 && tly >= 0) {
|
||
tdx = tlx; tdy = tly; td_ok = 1;
|
||
scroll_y0 = tdy; /* 列表拖动基准：按下原点（触发时才锁 scroll_base） */
|
||
/* 按下原点落在选中滑条 track 带内 → 开始拖动 */
|
||
if (SMENU[sel].ctrl == SC_SLIDER && s_sel_track_y >= 0 &&
|
||
tlx >= S_SLIDER_X - 12 && tlx <= S_SLIDER_X + S_SLIDER_W + 12 &&
|
||
tly >= s_sel_track_y - 14 && tly <= s_sel_track_y + 20) {
|
||
drag = sel;
|
||
const srow_t *r = &SMENU[sel];
|
||
int v = s_slider_val_from_x(r, tlx);
|
||
s_slider_set_from_track(r, v, 0);
|
||
need_paint = 1;
|
||
}
|
||
}
|
||
/* M2.37 列表拖动滚动：非滑条行按下后纵向位移超阈值 → 进入列表滚动。
|
||
* scroll_base 在触发瞬间反推，保证进入滚动那一刻不跳变（连续跟手）。
|
||
* M2.38 Bug4：默认标准滑动（手指上滑 → scroll_off 增大 = 内容往下翻看后面项）；
|
||
* 方向可经 input.swipe_invert 切换（1=反向：手指上滑 → 内容上移）。 */
|
||
if (td_ok && drag < 0 && !scroll_drag) {
|
||
int ddy = tly - scroll_y0;
|
||
if (ddy >= S_SCROLL_SLOP || ddy <= -S_SCROLL_SLOP) {
|
||
scroll_drag = 1;
|
||
meow_settings_get_bool("input.swipe_invert", &scroll_invert);
|
||
scroll_base = scroll_off + (scroll_invert ? -ddy : ddy);
|
||
}
|
||
}
|
||
if (scroll_drag && td_ok) {
|
||
int dydt = tly - scroll_y0;
|
||
scroll_off = s_clamp_scroll_range(scroll_base + (scroll_invert ? dydt : -dydt));
|
||
need_paint = 1;
|
||
}
|
||
if (drag >= 0 && td_ok) {
|
||
const srow_t *r = &SMENU[drag];
|
||
int v = s_slider_val_from_x(r, tlx);
|
||
s_slider_set_from_track(r, v, 0); /* 拖动实时 set_*，抬起才落盘 */
|
||
need_paint = 1;
|
||
}
|
||
} else if (type == EV_KEY && code == BTN_TOUCH) {
|
||
if (val && !td) {
|
||
if (now_ms() < touch_cooldown_until) {
|
||
tlx = tly = -1; /* 冷却丢弃 */
|
||
} else {
|
||
td = 1; td_ok = 0; tlx = -1; tly = -1; drag = -1; scroll_drag = 0;
|
||
}
|
||
} else if (!val && td) {
|
||
td = 0;
|
||
if (drag >= 0) { /* 滑条拖动结束 → 落盘 */
|
||
const srow_t *r = &SMENU[drag];
|
||
s_commit(r, 1);
|
||
drag = -1;
|
||
need_paint = 1;
|
||
} else if (scroll_drag) {
|
||
scroll_drag = 0; /* 列表滚动结束（已实时重绘），不再当 tap */
|
||
scroll_base = 0; scroll_y0 = 0;
|
||
need_paint = 1;
|
||
} else if (td_ok) {
|
||
int dx = tlx - tdx, dy = tly - tdy;
|
||
/* M2.39 左缘右滑返回：复用全局左缘返回判定 meow_edge_back()
|
||
* （与 SDK 全局左缘返回 A-0 同语义：左缘起点 + 右滑≥MEOW_EDGE_SWIPE
|
||
* 且横向主导），避免设置页自造一套重复判定。 */
|
||
if (meow_edge_back(tdx, dx, dy)) {
|
||
if (tfd >= 0) { unsigned char e[16]; while (read(tfd, e, sizeof e) == 16) {} }
|
||
goto done;
|
||
}
|
||
int adx = dx < 0 ? -dx : dx, ady = dy < 0 ? -dy : dy;
|
||
if (adx < 60 && ady < 60) { /* 视为 tap */
|
||
int tx = tdx, ty = tdy;
|
||
/* 底部返回按钮 */
|
||
if (ty >= H - 52 && tx >= SET_CARD_X && tx <= SET_CARD_X + 120) {
|
||
if (tfd >= 0) { unsigned char e[16]; while (read(tfd, e, sizeof e) == 16) {} }
|
||
goto done;
|
||
}
|
||
int cy = ty - SET_CONTENT_Y + scroll_off;
|
||
int idx = s_row_at_content_y(cy);
|
||
if (idx >= 0 && !s_setting_idx(idx)) {
|
||
/* 点分组标题行 → 仅选中下一设置行 */
|
||
int ns = s_next_setting(idx);
|
||
sel = ns; need_paint = 1; sel_changed = 1;
|
||
} else if (idx >= 0) {
|
||
const srow_t *r = &SMENU[idx];
|
||
sel = idx; need_paint = 1; sel_changed = 1;
|
||
if (r->ctrl == SC_SWITCH) {
|
||
int on = 0; meow_settings_get_switch(r->key, &on);
|
||
meow_settings_set_switch(r->key, !on);
|
||
s_commit(r, 1);
|
||
} else if (r->ctrl == SC_LIST) {
|
||
/* M2.39 网络列表行：开下拉（重新解析）+ 重绘 + 排空本页 tfd
|
||
* （复刻 s_dropdown 后的穿透防护，见下方 ENUM/PRESET 分支）。
|
||
* M2.76：WiFi/蓝牙升级为独立子页面 → 点开进 run_wifi_page/
|
||
* run_bt_page（阻塞，内部自开 fds；返回后仍须排空本页 tfd）。 */
|
||
after_modal = 1;
|
||
if (r->net_list == NET_LIST_WIFI_PAGE) { run_wifi_page(); s_net_refresh(); }
|
||
else if (r->net_list == NET_LIST_BT_PAGE) { run_bt_page(); s_net_refresh(); }
|
||
else if (r->net_list == NET_LIST_PIN_PAGE) { run_lock_settings_page(); s_net_refresh(); }
|
||
else s_net_open(r);
|
||
if (tfd >= 0) {
|
||
unsigned char e[16];
|
||
while (read(tfd, e, sizeof e) == 16) {}
|
||
usleep(40000);
|
||
while (read(tfd, e, sizeof e) == 16) {}
|
||
}
|
||
td = 0; td_ok = 0; drag = -1; scroll_drag = 0;
|
||
scroll_base = 0; scroll_y0 = 0;
|
||
tdx = tdy = tlx = tly = -1;
|
||
touch_cooldown_until = now_ms() + 300;
|
||
memset(&kd_pwr, 0, sizeof kd_pwr);
|
||
memset(&kd_vold, 0, sizeof kd_vold);
|
||
memset(&kd_volu, 0, sizeof kd_volu);
|
||
memset(&kd_play, 0, sizeof kd_play);
|
||
kp_poll(&kp_power, NULL, NULL); kp_poll(&kp_keys, NULL, NULL);
|
||
m_prev_pwr = kp_is_down(&kp_power, KEY_POWER);
|
||
m_prev_vold = kp_is_down(&kp_keys, KEY_VOLUMEDOWN);
|
||
m_prev_volu = kp_is_down(&kp_keys, KEY_VOLUMEUP);
|
||
m_prev_play = kp_is_down(&kp_keys, KEY_PLAYPAUSE);
|
||
need_paint = 1;
|
||
} else if (r->ctrl == SC_ENUM || r->ctrl == SC_PRESET) {
|
||
/* 单次点击即开选择器子对话框 */
|
||
after_modal = 1; /* 关闭后整帧重绘（还原被 dim 的状态栏） */
|
||
if (s_row_is_font(r)) {
|
||
/* M2.6 字重：字体行走「family→字重」两级子菜单 */
|
||
char fval[MEOW_SET_MAX_LEN];
|
||
if (s_font_dropdown(r, fval, sizeof fval)) {
|
||
meow_settings_set_str(r->key, fval);
|
||
s_commit(r, 1);
|
||
}
|
||
} else {
|
||
int pick = s_dropdown(r);
|
||
if (pick >= 0) {
|
||
if (r->ctrl == SC_ENUM) meow_settings_set_enum(r->key, pick);
|
||
else meow_settings_set_str(r->key, s_preset_value(r, pick));
|
||
s_commit(r, 1);
|
||
}
|
||
}
|
||
/* M2.38 Bug3：s_dropdown 返回后彻底排空本页 tfd +
|
||
* 重置触摸基线。根因：input 子系统把事件广播到所有
|
||
* 打开的 fd —— s_dropdown 用独立 fd 消费选项 tap，但
|
||
* 本页 tfd 同样收到了整套下拉会话事件；若不清空，
|
||
* 外层 while(read) 会把它们当新 tap → 穿透到下层设置项。
|
||
* 故 排空→40ms→再排空 + 重置触摸状态 + 冷却窗口吸收长尾。 */
|
||
if (tfd >= 0) {
|
||
unsigned char e[16];
|
||
while (read(tfd, e, sizeof e) == 16) {}
|
||
usleep(40000);
|
||
while (read(tfd, e, sizeof e) == 16) {}
|
||
}
|
||
td = 0; td_ok = 0; drag = -1; scroll_drag = 0;
|
||
scroll_base = 0; scroll_y0 = 0;
|
||
tdx = tdy = tlx = tly = -1;
|
||
touch_cooldown_until = now_ms() + 300;
|
||
/* 重置设置页按键防抖基线，防残边 */
|
||
memset(&kd_pwr, 0, sizeof kd_pwr);
|
||
memset(&kd_vold, 0, sizeof kd_vold);
|
||
memset(&kd_volu, 0, sizeof kd_volu);
|
||
memset(&kd_play, 0, sizeof kd_play);
|
||
kp_poll(&kp_power, NULL, NULL); kp_poll(&kp_keys, NULL, NULL);
|
||
m_prev_pwr = kp_is_down(&kp_power, KEY_POWER);
|
||
m_prev_vold = kp_is_down(&kp_keys, KEY_VOLUMEDOWN);
|
||
m_prev_volu = kp_is_down(&kp_keys, KEY_VOLUMEUP);
|
||
m_prev_play = kp_is_down(&kp_keys, KEY_PLAYPAUSE);
|
||
need_paint = 1;
|
||
} else if (r->ctrl == SC_SLIDER && tlx >= 0) {
|
||
int v = s_slider_val_from_x(r, tlx);
|
||
s_slider_set_from_track(r, v, 1);
|
||
}
|
||
}
|
||
}
|
||
}
|
||
td_ok = 0;
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
/* ---- 滚动 + 重绘 ---- */
|
||
if (need_paint) {
|
||
last_act = now;
|
||
/* 仅选中行变化时强制其可见；列表拖动滚动时保留用户滚到的位置，不把选中拉回视野 */
|
||
if (sel_changed) { scroll_off = s_clamp_scroll(sel, scroll_off); sel_changed = 0; }
|
||
draw_settings_page(sel, scroll_off);
|
||
/* 局部标脏：标题+卡片+滚动条+底部（y=42 以下全部，覆盖主题/选中/值变化），
|
||
* 状态栏(0-28)由 draw_statusbar/draw_clock 各自维护，不在此列。
|
||
* 选择器关闭后（after_modal）其全屏 dim 把状态栏也压暗了，须整帧重绘还原。 */
|
||
if (after_modal) { meow_dirty_full(); after_modal = 0; }
|
||
else meow_dirty_add(0, 42, fb_xres, fb_yres - 42);
|
||
meow_ui_flush();
|
||
}
|
||
/* M2.37 超时自动息屏（与主界面一致）：空闲 > screen_off_timeout → 关屏，但留在设置页：
|
||
* 置 meow_auto_slept 进入休眠态，由顶部睡眠门等待任意输入唤醒并重绘设置页、不丢上下文
|
||
* （对照 run_menu 外层 meow_auto_slept 的唤醒重绘，M2.17/2.18 同款语义）。 */
|
||
if (screen_off_timeout > 0 && meow_screen_on && !meow_auto_slept &&
|
||
(unsigned long long)(now - last_act) >= (unsigned long long)screen_off_timeout * 1000) {
|
||
meow_panel_off();
|
||
meow_auto_slept = 1;
|
||
wake_suppress = 1; /* 唤醒输入边沿待完全抬起后再接管，避免误动作 */
|
||
logmsg("settings: idle %ds -> auto screen-off (stay in settings)", screen_off_timeout);
|
||
}
|
||
/* ~1s 状态栏时钟刷新 */
|
||
if (now - last_tick >= 1000) {
|
||
last_tick = now;
|
||
draw_clock();
|
||
fb_norm_buf0();
|
||
meow_ui_flush();
|
||
}
|
||
usleep(POLL_MS * 1000);
|
||
}
|
||
done:
|
||
if (tfd >= 0) close(tfd);
|
||
kp_close(&kp_power); kp_close(&kp_keys);
|
||
logmsg("settings page closed");
|
||
}
|
||
|