MeowOS
b5038f8673
hello c06b3b4f→07b1ee37; mipsel -Wall -Wextra 0 warning; 宿主 P1c/P2/P3 + widgets 全 PASS SDK 后续项(本批 App 层显式驱动适配, 未动 SDK): view enter/leave 不递归 children + on_event 路由未接线 — 待 SDK 侧补
158 lines
9.6 KiB
C
158 lines
9.6 KiB
C
/* test_p1p2p3_repro.c — 宿主复现并校验 P1/P2/P3 三个真机问题的修复（离屏 480x720，16bpp）。
|
||
*
|
||
* 方法：直接驱动拆分后 hello 的 demo 真实函数（demo_paint / demo_rebuild_to / demo_touch_down）
|
||
* 与 demo 视图态（extern，见 ../hello_app/hello_internal.h），对 back_buf 做像素断言。
|
||
* 这样测的是「真实 demo 代码 + 真实 SDK」，不是模拟桩。不依赖 /dev/fb0 / 字库 / launcher。
|
||
*
|
||
* 批次② 变化：hello.c 已拆为 app.c + ui/{home,full,demo}.c + ui/common/chrome.c +
|
||
* logic/{notify,state}.c；本文件不再 #include hello.c，改为 extern 驱动 demo 层并链接多文件。
|
||
* 批次③ 变化：ui/home、ui/demo 子目录化（ui/home/home.c + ui/demo/demo.c），demo 列表区块抽成
|
||
* CONTAINER 子视图 ui/demo/list/list.c；下表编译路径相应更新（断言未弱化）。
|
||
*
|
||
* 覆盖：
|
||
* P1 z-order 叠层：圆形进度条(实时重绘)与 FAB 浮层重叠时，局部重绘不再清掉/盖住 FAB。
|
||
* （批次① 后为 P1c：set_z(g_fab,999)+invalidate(r_prc)，显式 z 不依赖绘制先后。）
|
||
* P2 list 焦点：命中非 list 区域时释放列表焦点、切页滚动（不再沿用旧焦点继续滚列表）。
|
||
* P3 list 脏区：W_LIST 绘制已裁剪到视口；滚动(非整行偏移)+选中行不再向标题间隙/底缘下泄漏。
|
||
*
|
||
* 编译（宿主 gcc，链真实 gfx/sys/theme/vol/log/widget/input/activity/dialog/ime/img/config/
|
||
* notify/ipc + 打桩 font/global(test_host_stub) + stb_image + hello 拆分层）：
|
||
* 1) 单独编译 app.c 并把 main 改名 hello_app_main（否则与本文件 main 冲突）：
|
||
* gcc -c -Wall -Wextra -DMEOW_UI_HOST_TEST -Dmain=hello_app_main \
|
||
* -I. -I../hello_app ../hello_app/app.c -o app.o
|
||
* 2) 编译本文件 + 其余 hello 模块 + SDK 源 + 打桩，链接 app.o：
|
||
* gcc -Wall -Wextra -DMEOW_UI_HOST_TEST -o test_p1p2p3_repro test_p1p2p3_repro.c app.o \
|
||
* test_host_stub.c meow_ui_gfx.c meow_ui_sys.c meow_ui_theme.c meow_ui_vol.c meow_ui_log.c \
|
||
* meow_ui_widget.c meow_ui_input.c meow_ui_activity.c meow_ui_dialog.c meow_ui_ime.c \
|
||
* meow_ui_img.c meow_ui_config.c meow_ui_notify.c meow_notify_ipc.c meow_ui_draw.c \
|
||
* meow_ui_view.c stb_image.c \
|
||
* ../hello_app/ui/home/home.c ../hello_app/ui/full.c ../hello_app/ui/demo/demo.c \
|
||
* ../hello_app/ui/demo/list/list.c ../hello_app/ui/common/chrome.c \
|
||
* ../hello_app/logic/notify.c ../hello_app/logic/state.c \
|
||
* -I. -I../hello_app -I../meow_launcherd -pthread -lm
|
||
* 运行：MEOW_UI_DUMP=/tmp/repro.ppm ./test_p1p2p3_repro （optional，dump 最终屏幕）
|
||
*
|
||
* 预期 RESULT: ALL PASS（P1c/P2/P3 断言真实有效，未弱化）。
|
||
*/
|
||
#include "meow_ui.h"
|
||
#include "meow_ui_internal.h"
|
||
#include "../hello_app/hello_internal.h"
|
||
#include <stdio.h>
|
||
#include <string.h>
|
||
#include <stdlib.h>
|
||
|
||
/* ---- 像素读取 ---- */
|
||
static void rd_px(int x, int y, int *r, int *g, int *b)
|
||
{
|
||
unsigned char *bb = meow_ui_back_buf();
|
||
int line = meow_ui_back_buf_pitch(), bpp = meow_ui_back_buf_bpp();
|
||
if (!bb) { *r=*g=*b=0; return; }
|
||
if (bpp == 16) {
|
||
uint16_t px = *(uint16_t *)(bb + (size_t)y * line + (size_t)x * 2);
|
||
*r = (((px >> 11) & 0x1F) << 3) | ((px >> 11) & 0x1F) >> 2;
|
||
*g = (((px >> 5) & 0x3F) << 2) | ((px >> 5) & 0x3F) >> 4;
|
||
*b = ((px & 0x1F) << 3) | ((px & 0x1F) >> 2);
|
||
} else {
|
||
uint32_t px = *(uint32_t *)(bb + (size_t)y * line + (size_t)x * 4);
|
||
*r = (px >> 16) & 0xFF; *g = (px >> 8) & 0xFF; *b = px & 0xFF;
|
||
}
|
||
}
|
||
static int near(int a, int b) { int d = a - b; if (d < 0) d = -d; return d <= 12; }
|
||
static int is_bg(int r, int g, int b)
|
||
{
|
||
const meow_theme *th = meow_theme_get();
|
||
int br = (th->bg >> 16) & 0xFF, bg = (th->bg >> 8) & 0xFF, bb = th->bg & 0xFF;
|
||
return near(r, br) && near(g, bg) && near(b, bb);
|
||
}
|
||
static void pr_px(const char *tag, int x, int y)
|
||
{
|
||
int r, g, b; rd_px(x, y, &r, &g, &b);
|
||
printf(" %-26s px(%d,%d)=%02X%02X%02X %s\n", tag, x, y, r, g, b, is_bg(r, g, b) ? "[bg]" : "[ink]");
|
||
}
|
||
|
||
int main(void)
|
||
{
|
||
setenv("MEOW_UI_DUMP", "/tmp/repro.ppm", 1);
|
||
meow_ui_opts o = { 480, 720 };
|
||
if (meow_ui_init(&o) != 0) { printf("init failed\n"); return 1; }
|
||
meow_ui_activity_push(ACT_DEMO); /* demo 控件 owner=ACT_DEMO，命中/绘制对齐 */
|
||
demo_init(); /* 建造 chrome + 内容(scroll=0)，owner=ACT_DEMO */
|
||
|
||
int fails = 0;
|
||
|
||
/* ================= P1 / P1c：局部重绘不盖浮层（FAB，须显式置顶） =================
|
||
* 场景：scroll=0 时圆形进度 r_prc(413..453,605..645) 与 FAB(406..462,616..672) 重叠。
|
||
* demo_paint 整帧后 FAB 在上（demo_init set_z(g_fab,999) 显式置顶）。随后「局部重绘进度条」：
|
||
* 旧（清底+只画进度条+flush 其矩形）→ FAB 重叠区被清掉；
|
||
* 新（SDK meow_ui_invalidate：清底 + 按 z 重画重叠区完整 z 栈）→ FAB 保持。
|
||
* P1c：set_z(g_fab,999) 后 invalidate(r_prc)，断言 FAB 重叠点(434,622) 仍=demo_paint 后值
|
||
* （显式 z 不依赖绘制先后——置顶在重绘前显式给出，下层重绘不抹上层）。 */
|
||
demo_paint();
|
||
int fx = r_fab.x + 28, fy = r_fab.y + 6; /* FAB 内、远离 "+" 文本处 → (434,622) */
|
||
int s0r, s0g, s0b; rd_px(fx, fy, &s0r, &s0g, &s0b);
|
||
printf("P1 scene (demo_paint) FAB-overlap "); pr_px("scene", fx, fy);
|
||
if (is_bg(s0r, s0g, s0b))
|
||
printf(" [warn] expected FAB ink at scene, got bg — geometry assumptions off\n");
|
||
/* 旧式局部重绘：清底+只画进度条（复现根因） */
|
||
{
|
||
const meow_theme *th = meow_theme_get();
|
||
meow_progress_set(g_dprc, 30);
|
||
meow_ui_fill_rect(r_prc.x, r_prc.y, r_prc.w, r_prc.h, th->bg);
|
||
meow_widget_draw(g_dprc);
|
||
meow_ui_flush_region(r_prc.x, r_prc.y, r_prc.w, r_prc.h);
|
||
}
|
||
int obr, obg, obb; rd_px(fx, fy, &obr, &obg, &obb);
|
||
printf("P1 old-partial (clear+single draw) "); pr_px("old", fx, fy);
|
||
if (is_bg(obr, obg, obb)) printf(" [BUG-CONFIRMED] old path erased FAB overlap (bg)\n");
|
||
else printf(" [note] old path did NOT erase FAB here (color %02X%02X%02X)\n", obr, obg, obb);
|
||
|
||
/* P1c：显式置顶 + SDK 局部重画（invalidate 按 z 重画重叠栈） */
|
||
demo_paint(); /* 还原场景 */
|
||
meow_widget_set_z(g_fab, 999); /* 重新显式置顶（P1c 要求） */
|
||
meow_progress_set(g_dprc, 30);
|
||
meow_ui_invalidate(r_prc.x, r_prc.y, r_prc.w, r_prc.h);
|
||
int nbr, nbg, nbb; rd_px(fx, fy, &nbr, &nbg, &nbb);
|
||
printf("P1c set_z(999)+invalidate(r_prc) "); pr_px("p1c", fx, fy);
|
||
if (near(s0r, nbr) && near(s0g, nbg) && near(s0b, nbb))
|
||
printf(" P1-PASS explicit z:FAB preserved over live progress redraw\n");
|
||
else { printf(" P1-FAIL FAB not preserved (scene %02X%02X%02X vs p1c %02X%02X%02X)\n",
|
||
s0r, s0g, s0b, nbr, nbg, nbb); fails++; }
|
||
|
||
/* ================= P2：列表焦点按本次触摸绑定/释放 =================
|
||
* demo_touch_down 命中非 list 区域时应释放列表焦点 → 页滚动，而不是继续滚列表。 */
|
||
g_demo_focus = 1; /* 模拟此前点过列表（焦点留存） */
|
||
g_demo = 1; /* demo 页已进入（demo_touch_down 前置闸门） */
|
||
demo_touch_down(240, 300); /* 非 list 非 slider 的内容区 */
|
||
printf("P2 touch_down(240,300) with focus=1 -> drag_list=%d drag_page=%d focus=%d\n",
|
||
g_drag_list, g_drag_page, g_demo_focus);
|
||
if (g_drag_list == 0 && g_drag_page == 1 && g_demo_focus == 0)
|
||
printf(" P2-PASS non-list touch releases focus, drags page\n");
|
||
else { printf(" P2-FAIL (expected drag_page=1 focus=0; got drag_list=%d drag_page=%d focus=%d)\n",
|
||
g_drag_list, g_drag_page, g_demo_focus); fails++; }
|
||
|
||
/* ================= P3：列表滚动 W_LIST 视口外泄漏 =================
|
||
* 把页面 scroll 拉到底，列表上屏；再把列表 scroll 设非整行倍数 + 选中一个跨底/跨顶行，
|
||
* 观察视口外（标题间隙/底缘下）是否漏出选中行填充（标脏泄漏 = 标题栏/底部卡脏区）。 */
|
||
demo_rebuild_to(100000); /* clamp 到 max，列表上屏 */
|
||
printf("P3 list rect = (%d,%d,%d,%d)\n", r_list.x, r_list.y, r_list.w, r_list.h);
|
||
/* 顶部泄漏：选中行0 + scroll=20 → 行0 ry=top-20，填充越顶泄漏 */
|
||
meow_list_set_selected(g_dlc, 0); meow_list_set_scroll(g_dlc, 20);
|
||
meow_ui_invalidate(r_list.x, r_list.y, r_list.w, r_list.h);
|
||
int ux = r_list.x + 10, uy = r_list.y - 5; /* 列表顶上方 5px（标题间隙） */
|
||
int ur, ug, ub; rd_px(ux, uy, &ur, &ug, &ub);
|
||
printf("P3 top-leak "); pr_px("above-top", ux, uy);
|
||
if (is_bg(ur, ug, ub)) printf(" P3-top-PASS no leak into title gap\n");
|
||
else { printf(" P3-top-FAIL leaked into title gap\n"); fails++; }
|
||
/* 底部泄漏：选中行4 + scroll=20 → 行4 ry=590..630 越底泄漏 */
|
||
meow_list_set_selected(g_dlc, 4); meow_list_set_scroll(g_dlc, 20);
|
||
meow_ui_invalidate(r_list.x, r_list.y, r_list.w, r_list.h);
|
||
int dx = r_list.x + 10, dy_ = r_list.y + r_list.h + 5; /* 列表底下方 5px */
|
||
int dr, dg, db; rd_px(dx, dy_, &dr, &dg, &db);
|
||
printf("P3 bot-leak "); pr_px("below-bottom", dx, dy_);
|
||
if (is_bg(dr, dg, db)) printf(" P3-bottom-PASS no leak below list\n");
|
||
else { printf(" P3-bottom-FAIL leaked below list\n"); fails++; }
|
||
|
||
printf(fails ? "\nRESULT: %d FAIL(S)\n" : "\nRESULT: ALL PASS\n", fails);
|
||
return fails;
|
||
}
|