MeowOS-For-R3P2/patch_v2/bootmenu/test_bm_fw.c

/* test_bm_fw.c — 宿主单测：meow_bootmenu 的亮度决策（M23 亮度单一权威源）。
 *
 * 覆盖真机 0.8.46 两个症状的判定矩阵：
 *   ① 开机菜单/选单亮度 = 面板继承值 60（用户设置 1）—— 选单路径 bootmenu_settings_brightness()
 *   ② HibyOS 亮/灭屏瞬间爆亮 —— supervisor 起始 saved、扫描窗保底、热键熄屏恢复三处决策
 *
 * 编译/运行（Termux 上 /tmp 不可写，**必须带 TMPDIR**，否则 mkstemp 两条用例会 FAIL）：
 *   TMPDIR=$HOME/tmp/m23test mkdir -p "$HOME/tmp/m23test"
 *   gcc -Wall -Wextra -Os -I../meow_launcherd -Wno-unused-function \
 *       -Wno-unused-parameter -Wno-unused-variable \
 *       test_bm_fw.c ../meow_launcherd/meow_touch.c -o "$HOME/tmp/m23test/test_bm_fw"
 *   TMPDIR=$HOME/tmp/m23test "$HOME/tmp/m23test/test_bm_fw"   # 全 PASS -> exit 0
 * （TMPDIR 未设时本文件会自己退到可写的 /tmp 或 $HOME/tmp，但显式给最稳。）
 * env MEOW_BACKLIGHT / MEOW_SETTINGS_FILE 把背光与 settings 指到临时文件（真机无这两个 env，
 * 走 /sys 与 /usr/data 默认路径），因此这里的读写断言就是真机同一条代码路径。
 */
#define BM_NO_MAIN
#include "meow_bootmenu.c"

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/stat.h>

static int g_pass = 0, g_fail = 0;

static void check(const char *name, int got, int want)
{
    if (got == want) { g_pass++; printf("PASS %s\n", name); }
    else { g_fail++; printf("FAIL %s: got %d want %d\n", name, got, want); }
}

/* 临时目录根（返回可写目录；结果缓存在静态缓冲里）：
 *   ① $TMPDIR（Termux/Android 上 /tmp 属别的用户、本进程不可写）
 *   ② /tmp（Linux 构建容器）
 *   ③ $HOME/tmp/m23test（两者都不可写时的兜底，自动 mkdir）
 * 评审 r1 反馈：只靠 $TMPDIR 会让没设环境变量的复跑出现 2 条 mkstemp FAIL，故这里自愈。 */
static const char *tmp_root(void)
{
    static char buf[512];
    if (buf[0]) return buf;
    const char *t = getenv("TMPDIR");
    if (t && t[0]) { snprintf(buf, sizeof buf, "%s", t); return buf; }
    const char *home = getenv("HOME");
    snprintf(buf, sizeof buf, "%s", "/tmp");
    char probe[560];
    snprintf(probe, sizeof probe, "%s/.bm_probeXXXXXX", buf);
    int fd = mkstemp(probe);
    if (fd >= 0) { close(fd); unlink(probe); return buf; }
    if (home && home[0]) {
        snprintf(buf, sizeof buf, "%s/tmp/m23test", home);
        mkdir(buf, 0700);
        return buf;
    }
    return buf;   /* 实在不行也返回 /tmp，让失败信息可读 */
}

static void put_file(const char *path, const char *body)
{
    FILE *f = fopen(path, "w");
    if (!f) { g_fail++; printf("FAIL cannot write %s\n", path); return; }
    fputs(body, f);
    fclose(f);
}

static int get_file_int(const char *path)
{
    FILE *f = fopen(path, "r");
    int v = -1;
    if (!f) return -2;
    if (fscanf(f, "%d", &v) != 1) v = -1;
    fclose(f);
    return v;
}

/* ---- A) supervisor 起始 saved_brightness：settings 是唯一权威 ----
 * 真机 bug：settings display.brightness=1，面板被播放器写成 60 → 旧代码 saved=60（>60→60 的
 * 硬钉同宗），随后扫描窗保底/熄屏恢复把 60 写回 → 亮/灭屏爆亮。新语义必须取 1。 */
static void test_pick_saved(void)
{
    const char *src = NULL;
    int v;

    v = bm_bri_pick_saved(1, 60, 1, 101, &src);   /* ← 真机症状本体 */
    check("saved: settings 1 wins over panel 60", v == 1 && !strcmp(src, "settings"), 1);
    v = bm_bri_pick_saved(1, 0, 1, 101, &src);    /* 播放器已把面板写成 0 */
    check("saved: settings 1 when panel dark", v == 1 && !strcmp(src, "settings"), 1);
    v = bm_bri_pick_saved(7, 7, 1, 101, &src);
    check("saved: settings 7", v == 7 && !strcmp(src, "settings"), 1);

    /* settings 不可读（降级路径）：**不**原样采信面板瞬时值，封顶 SAFE_LOW=10（P2-1 修复）。
     * 这是 M2.9 闪屏防护的正确形态：宁可用安全低亮，也不把「启动瞬间的面板值」当用户亮度回放。 */
    v = bm_bri_pick_saved(-1, 60, 1, 101, &src);
    check("saved: fallback caps panel 60 -> SAFE_LOW 10",
          v == BM_BRI_SAFE_LOW && v == 10 && !strcmp(src, "panel-capped"), 1);
    v = bm_bri_pick_saved(-1, 80, 1, 101, &src);  /* 用户可能真设 80，但降级时不敢信面板 → 10 */
    check("saved: fallback caps 80 -> SAFE_LOW (old bug shape)",
          v == BM_BRI_SAFE_LOW && !strcmp(src, "panel-capped"), 1);
    v = bm_bri_pick_saved(-1, 200, 1, 101, &src); /* 越界（播放器瞬时 max）同样封顶 */
    check("saved: fallback caps 200 -> SAFE_LOW",
          v == BM_BRI_SAFE_LOW && !strcmp(src, "panel-capped"), 1);
    v = bm_bri_pick_saved(-1, 90, 1, 0, &src);    /* max 读不到也不抬高 */
    check("saved: fallback caps 90 -> SAFE_LOW (unknown max)",
          v == BM_BRI_SAFE_LOW && !strcmp(src, "panel-capped"), 1);
    /* 比 SAFE_LOW 更暗的真实值保留（用户刻意调很暗，不要替用户调亮） */
    v = bm_bri_pick_saved(-1, 3, 1, 101, &src);
    check("saved: fallback keeps darker 3", v == 3 && !strcmp(src, "panel-capped"), 1);
    v = bm_bri_pick_saved(-1, 2, 6, 101, &src);   /* 低于 brightness_min 时抬到 min（防全黑） */
    check("saved: fallback clamps up to brightness_min 6", v == 6 && !strcmp(src, "panel-capped"), 1);
    v = bm_bri_pick_saved(0, 3, 1, 101, &src);    /* 非正值按住「未知」处理 */
    check("saved: user<=0 treated unknown", v == 3 && !strcmp(src, "panel-capped"), 1);

    /* settings 与面板都不可知且面板黑：安全低亮，绝不再写 60 */
    v = bm_bri_pick_saved(-1, 0, 1, 101, &src);
    check("saved: dark + no settings -> safe-low", v == BM_BRI_SAFE_LOW && v != 60 &&
                                                  v > 0 && !strcmp(src, "safe-low"), 1);
    v = bm_bri_pick_saved(-1, -1, 1, 0, &src);    /* 读失败 + max 读不到 */
    check("saved: read-fail -> safe-low", v == BM_BRI_SAFE_LOW && !strcmp(src, "safe-low"), 1);
    /* 与 M20 watchdog 同一安全下限（同一系统不该有两个安全值） */
    check("saved: SAFE_LOW aligned with WD_BRI_SAFE_LOW (10)", BM_BRI_SAFE_LOW, 10);
}

/* ---- A2) clamp 语义单测：取代旧的 `>60 → 60` 硬钉 ---- */
static void test_clamp(void)
{
    check("clamp: in-range untouched", bm_bri_clamp(37, 1, 101), 37);
    check("clamp: above max -> max", bm_bri_clamp(200, 1, 101), 101);
    check("clamp: 80 stays 80 (was pinned 60)", bm_bri_clamp(80, 1, 101), 80);
    check("clamp: below min -> min", bm_bri_clamp(0, 3, 101), 3);
    check("clamp: mn<1 -> 1", bm_bri_clamp(0, 0, 101), 1);
    check("clamp: unknown max only floors", bm_bri_clamp(90, 1, 0), 90);
}

/* ---- B) 扫描窗保底：只在「播放器忙 + 面板暗 + 面板未下电」时补，补的是用户值 ---- */
static void test_floor_decide(void)
{
    const char *why = NULL;
    int v;

    /* 触发条件回到 pre-M23：面板暗就补（不依赖 /proc 的 D 态 = 评审 r1 P2-2 硬要求） */
    v = bm_bri_floor_decide(1, 0, 0, 5000, 0, &why);    /* settings=1，播放器待机写 0 */
    check("floor: writes user value 1 (not 60)", v == 1 && !strcmp(why, "scan-floor"), 1);
    v = bm_bri_floor_decide(80, 0, 0, 5000, 0, &why);   /* saved=80 只可能来自 settings */
    check("floor: saved 80 (from settings) floors at 80", v == 80 && !strcmp(why, "scan-floor"), 1);
    v = bm_bri_floor_decide(0, 0, 0, 5000, 0, &why);    /* saved 未知 -> 安全低亮 */
    check("floor: unknown saved -> safe-low", v == BM_BRI_SAFE_LOW && !strcmp(why, "scan-floor"), 1);

    /* Bug 4 防退化回归用例（评审 r1 P2-2）：面板暗就必须能补，不能有任何「播放器看起来不忙」
     * 的前提 —— 旧 busy 门会让这条变成 no-write（黑屏几分钟）。 */
    v = bm_bri_floor_decide(7, 0, 0, 89999, 0, &why);
    check("floor: Bug4 regression — dark+unlatched always floors", v == 7 &&
                                                                 !strcmp(why, "scan-floor"), 1);

    v = bm_bri_floor_decide(1, 5, 0, 5000, 0, &why);    /* 面板已亮：不动 */
    check("floor: visible -> no write", v == 0 && !strcmp(why, "visible"), 1);
    v = bm_bri_floor_decide(1, 0, 1, 5000, 0, &why);    /* bl_power>0（纯保险）：不动 */
    check("floor: panel powered off -> no write", v == 0 && !strcmp(why, "panel-off"), 1);

    /* 评审 r2 P2-2 核心：电源键**锁存**。窗内按过电源键 → 本次窗口内此后一律不补，
     * 不再「3s 到期就把用户刚熄的屏点亮」。 */
    v = bm_bri_floor_decide(1, 0, 0, 5000, 1, &why);
    check("floor: power key latched -> no write", v == 0 && !strcmp(why, "power-key-latched"), 1);
    /* 锁存不会过期：窗口剩 1ms 也不补（旧实现 3s 后就会补） */
    v = bm_bri_floor_decide(1, 0, 0, 1, 1, &why);
    check("floor: latch never expires inside window", v == 0 &&
                                                      !strcmp(why, "power-key-latched"), 1);
    /* 下一轮窗口（锁存已清零）恢复正常补亮 */
    v = bm_bri_floor_decide(1, 0, 0, 90000, 0, &why);
    check("floor: new window (latch cleared) floors again", v == 1 &&
                                                            !strcmp(why, "scan-floor"), 1);

    v = bm_bri_floor_decide(1, 0, 0, 0, 0, &why);       /* 90s 窗口结束：放手 */
    check("floor: window over -> no write", v == 0 && !strcmp(why, "window-over"), 1);
    v = bm_bri_floor_decide(1, 0, 0, -1, 0, &why);
    check("floor: negative window -> no write", v == 0 && !strcmp(why, "window-over"), 1);
}

/* ---- C) 热键冻结前的熄屏恢复值：面板真实值 > settings saved > 安全低亮 ---- */
static void test_hotkey_saved(void)
{
    const char *src = NULL;
    int v;

    v = bm_bri_hotkey_saved(1, 0, 1, 101, &src);     /* 电源已熄屏：恢复用户值 1，不再回 60 */
    check("hotkey: blank -> saved (settings 1)", v == 1 && !strcmp(src, "saved"), 1);
    v = bm_bri_hotkey_saved(60, 0, 1, 101, &src);    /* saved=60 只可能来自 settings（降级已封顶 10） */
    check("hotkey: blank -> saved 60 (settings value)", v == 60 && !strcmp(src, "saved"), 1);
    v = bm_bri_hotkey_saved(1, 77, 1, 101, &src);    /* 面板亮着：跟随面板（HibyOS 里改过亮度） */
    check("hotkey: panel-now wins", v == 77 && !strcmp(src, "panel-now"), 1);
    v = bm_bri_hotkey_saved(1, 200, 1, 101, &src);   /* 越界值 clamp 到 max_brightness */
    check("hotkey: panel-now clamped to max", v == 101 && !strcmp(src, "panel-now"), 1);
    v = bm_bri_hotkey_saved(1, 1, 6, 101, &src);     /* 低于 brightness_min 抬到 min */
    check("hotkey: panel-now raised to min 6", v == 6 && !strcmp(src, "panel-now"), 1);
    v = bm_bri_hotkey_saved(0, 0, 1, 101, &src);
    check("hotkey: nothing known -> safe-low", v == BM_BRI_SAFE_LOW && !strcmp(src, "safe-low"), 1);
}

/* ---- D) settings.conf 解析（与 watchdog 同源同 clamp）+ 打开重试 ---- */
static void test_settings_parse(void)
{
    char path[600];
    snprintf(path, sizeof path, "%s/bmsetXXXXXX", tmp_root());
    int fd = mkstemp(path);
    if (fd < 0) { g_fail++; printf("FAIL settings: mkstemp\n"); return; }
    close(fd);
    setenv("MEOW_SETTINGS_FILE", path, 1);

    put_file(path, "# meow-settings 1\ndisplay.brightness = 1\ndisplay.brightness_min = 1\n"
                   "audio.volume = 10\n");
    check("settings: device file -> 1", bootmenu_settings_brightness(NULL), 1);

    put_file(path, "display.brightness = 0\ndisplay.brightness_min = 3\n");
    int mn = 0;
    check("settings: clamp up to min", bootmenu_settings_brightness(&mn), 3);
    check("settings: brightness_min parsed", mn, 3);

    put_file(path, "display.brightness = 200\ndisplay.brightness_min = 1\n");
    check("settings: clamp down to 100", bootmenu_settings_brightness(NULL), 100);

    put_file(path, "audio.volume = 10\n");
    /* 评审 r2 非阻塞 1（采纳）：「文件里没有这个键」与「文件读不到」同属不可信 →
     * 返回 -1，而不是 launcher 设置表的默认 101→100（那会让扫描窗待机补到 100）。 */
    int mn2 = 0;
    check("settings: missing key -> -1 (untrusted)", bootmenu_settings_brightness(&mn2), -1);
    check("settings: missing key still reports min", mn2, 1);

    unlink(path);
    unsigned long long t0 = now_ms();
    int r = bootmenu_settings_brightness(NULL);
    unsigned long long dt = now_ms() - t0;
    check("settings: missing -> -1", r, -1);
    check("settings: open retried (>=15ms)", dt >= 15, 1);

    unsetenv("MEOW_SETTINGS_FILE");
}

/* ---- E) 端到端：真的读写一个「背光文件」，复现两个真机场景 ----
 * 1) settings=1、播放器把面板写成 60 → supervisor 起始 saved 必须是 1，扫描窗保底写 1（不是 60）
 * 2) 用户按电源熄屏（播放器不忙）→ 保底决策返回 0，面板保持 0（不被抢亮 = 熄屏不爆亮） */
static void test_e2e_backlight(void)
{
    char bl[600], st[600];
    snprintf(bl, sizeof bl, "%s/bmblXXXXXX", tmp_root());
    snprintf(st, sizeof st, "%s/bmstXXXXXX", tmp_root());
    int fd = mkstemp(bl);
    if (fd < 0) { g_fail++; printf("FAIL e2e: mkstemp bl\n"); return; }
    close(fd);
    fd = mkstemp(st);
    if (fd < 0) { g_fail++; printf("FAIL e2e: mkstemp st\n"); unlink(bl); return; }
    close(fd);
    setenv("MEOW_BACKLIGHT", bl, 1);
    setenv("MEOW_SETTINGS_FILE", st, 1);

    put_file(st, "display.brightness = 1\ndisplay.brightness_min = 1\n");
    put_file(bl, "60\n");                       /* 播放器启动画面写的 60 */

    int mn_e2e = 1;
    int user = bootmenu_settings_brightness(&mn_e2e);
    int panel = read_brightness();
    const char *src = "?";
    int saved = bm_bri_pick_saved(user, panel, mn_e2e, 101, &src);
    check("e2e: panel file read 60", panel, 60);
    check("e2e: saved from settings = 1", saved, 1);

    /* 扫描窗：播放器待机把背光写 0 → 保底写用户值 1 */
    put_file(bl, "0\n");
    const char *why = NULL;
    int floor = bm_bri_floor_decide(saved, read_brightness(), 0, 5000, 0, &why);
    if (floor > 0) write_brightness(floor);
    check("e2e: scan floor writes 1 (not 60)", get_file_int(bl), 1);

    /* bl_power>0（纯保险分支）→ 保底不写 */
    put_file(bl, "0\n");
    floor = bm_bri_floor_decide(saved, read_brightness(), 1, 5000, 0, &why);
    if (floor > 0) write_brightness(floor);
    check("e2e: user screen-off (panel-off) stays dark", get_file_int(bl), 0);

    /* 评审 r2 核心场景：用户按电源熄屏（bl_power 仍 0）→ 锁存 → 本次窗口内**永久**不补，
     * 不会再出现「3s 后自己亮回来」 */
    put_file(bl, "0\n");
    floor = bm_bri_floor_decide(saved, read_brightness(), 0, 5000, 1, &why);
    if (floor > 0) write_brightness(floor);
    check("e2e: user screen-off (power key latched) stays dark", get_file_int(bl), 0);
    check("e2e: latched why", !strcmp(why, "power-key-latched"), 1);

    /* 热键确认框：面板黑着 → 按 saved（用户值 1）点亮，不是 60 */
    int hk = bm_bri_hotkey_saved(saved, read_brightness(), mn_e2e, 101, &src);
    write_brightness(hk);
    check("e2e: confirm box lights at 1", get_file_int(bl), 1);

    /* settings 被改：saved 不再跟旧值（每次开机重读 settings） */
    put_file(st, "display.brightness = 5\ndisplay.brightness_min = 1\n");
    src = "?";
    saved = bm_bri_pick_saved(bootmenu_settings_brightness(NULL), read_brightness(), mn_e2e, 101, &src);
    check("e2e: saved follows new settings 5", saved, 5);

    /* 降级路径回归（评审 P2-1）：settings 不可读 + 面板瞬时 60（播放器启动画面）
     * → saved 只能是 SAFE_LOW=10，绝不能原样 60，否则扫描窗/确认框会把 60 写回去。 */
    unlink(st);
    put_file(bl, "60\n");
    int mn_d = 1;
    src = "?";
    int dsaved = bm_bri_pick_saved(bootmenu_settings_brightness(&mn_d), read_brightness(),
                                   mn_d, 101, &src);
    check("e2e: settings unreadable -> saved SAFE_LOW (not 60)", dsaved, BM_BRI_SAFE_LOW);
    check("e2e: degraded src=panel-capped", !strcmp(src, "panel-capped"), 1);

    /* 评审 r2 非阻塞 1（采纳）：文件存在但缺 display.brightness 键 → 视同不可信 →
     * saved 同样封顶 SAFE_LOW，不会补到 launcher 缺省的 100（比老 bug 的 60 更亮）。 */
    put_file(st, "display.brightness_min = 1\n");
    put_file(bl, "60\n");
    src = "?";
    int msaved = bm_bri_pick_saved(bootmenu_settings_brightness(&mn_d), read_brightness(),
                                   mn_d, 101, &src);
    check("e2e: missing brightness key -> SAFE_LOW (not 100)", msaved, BM_BRI_SAFE_LOW);
    check("e2e: missing key src=panel-capped", !strcmp(src, "panel-capped"), 1);

    unlink(bl); unlink(st);
    unsetenv("MEOW_BACKLIGHT");
    unsetenv("MEOW_SETTINGS_FILE");
}

int main(void)
{
    test_pick_saved();
    test_clamp();
    test_floor_decide();
    test_hotkey_saved();
    test_settings_parse();
    test_e2e_backlight();
    printf("\n%d passed, %d failed\n", g_pass, g_fail);
    return g_fail ? 1 : 0;
}