MeowOS-For-R3P2/patch_v2/meow_launcherd/keys.c

/* keys.c — MeowOS launcher 拆分模块（LAUNCHER_SPLIT_PLAN 拆分）。*/
/* 本文件由拆分工具从 meow_launcherd.c 按职责搬移；逻辑与原文 0-diff（仅 static 可见性按跨模块需求调整）。*/
#include "meow_launcher_internal.h"

int kd_tick(struct kd_state *s, int raw)
{
    unsigned long long now = now_ms();
    int ev = KD_NONE;
    if (raw != s->raw) {
        if (s->raw == 0 && raw != 0) { /* 任何跳变都重记稳定窗口（含原始 raw 变化） */ }
        s->raw = raw; s->since = now;
    }
    int want = s->raw;
    if (want != s->stable) {
        if (now - s->since >= KEY_DEBOUNCE_MS) {
            s->stable = want;
            if (s->stable && !s->down) { s->down = 1; s->down_at = now; s->longpressed = 0; ev = KD_DOWN; }
            else if (!s->stable && s->down) { s->down = 0; ev = KD_UP; }
        }
    }
    if (s->down && !s->longpressed && now - s->down_at >= CLICK_MS) s->longpressed = 1;
    return ev;
}


/* Unblank the panel AFTER the player is frozen: with the player SIGSTOPped
 * it can no longer re-blank, so the menu (drawn on fb0) stays visible even
 * when the menu opened while the player's screen timeout had blanked the
 * panel. The blank state still belongs to the player's state machine — on
 * session end restore_backlight() re-blanks when menu_opened_blank, so the
 * player resumes into a consistent (blanked) state. */
void unblank_panel(void)
{
    int fbfd = open(FB_DEV, O_RDWR);
    if (fbfd >= 0) { ioctl(fbfd, FBIOBLANK, 0); close(fbfd); }
    logmsg("panel unblanked (player frozen)");
}

void meow_panel_off(void)
{
    meow_saved_brightness = read_brightness();
    if (meow_saved_brightness <= 0) meow_saved_brightness = 60;
    write_brightness(0, "meow_panel_off");
    if (screen_off_mode == 0) {
        /* panel：面板下电 + FBIOPBLANK(4)（同时挂起 goodix 触摸，无误触） */
        int f = open(FB_DEV, O_RDWR);
        if (f >= 0) { ioctl(f, FBIOBLANK, 4); close(f); }
    } else {
        /* black：仅背光 0 全黑（面板仍上电，触摸可唤醒） */
    }
    meow_screen_on = 0;
    logmsg("meow panel OFF (mode=%s brightness 0%s)",
           screen_off_mode ? "black" : "panel",
           screen_off_mode ? "" : " + blank 4");
}

void meow_panel_on(void)
{
    int f = open(FB_DEV, O_RDWR);
    if (f >= 0) { ioctl(f, FBIOBLANK, 0); close(f); }
    /* 亮度恢复以**用户设置**为准，而非 meow_saved_brightness（可能过期）。
     * watchdog 独立息屏（wd_panel_off 直接 write_brightness(0)，见 meow_watchdog.c）**不会**
     * 更新本进程 meow_saved_brightness——若用其恢复会回错值（真机「PIN 亮屏亮度跳高」，
     * 2026-09-03）。settings 已从盘上读到→按 display.brightness（clamp）恢复；未读到（早启动）
     * →回退 meow_saved_brightness 现值（保持旧行为，防开机竞态）。 */
    if (meow_settings_loaded()) {
        int b = meow_settings_brightness_clamped();
        if (b > 0) { write_brightness(b, "meow_panel_on"); meow_saved_brightness = b; }
    } else {
        write_brightness(meow_saved_brightness > 0 ? meow_saved_brightness : 60, "meow_panel_on");
    }
    meow_screen_on = 1;
    /* M2.8 Bug 3-residual：亮屏必须用 fb_pan_buf0_force 无条件重发 pan。fb_norm_buf0 在
     * 缓存 fb_active_yoffset==0 时提前返回，而 FBIOBLANK(4)->(0) 后 LCDC 扫描地址可能已复位
     * 到非 buffer0 / 失效位置，缓存仍是 0 导致真正的 re-pan 从未发出 —— M2.7 只加 fb_norm_buf0
     * 仍黑屏的原因。主界面都画在 buffer0（mmap 偏移 0），此处强制 re-pan 保证唤醒后落在 buffer0。
     * 当前界面内容的重绘由调用方（run_menu 醒屏分支）经 meow_repaint_surface 完成。 */
    fb_pan_buf0_force();
    logmsg("meow panel ON (blank 0 + brightness %d)", meow_saved_brightness);
}

void meow_toggle_panel(void) { if (meow_screen_on) meow_panel_off(); else meow_panel_on(); }


int kp_open(struct keypoll *kp, const char *dev)
{
    memset(kp, 0, sizeof *kp);
    kp->fd = open(dev, O_RDONLY | O_NONBLOCK);
    if (kp->fd < 0) { logmsg("open %s: %s", dev, strerror(errno)); return -1; }
    if (ioctl(kp->fd, EVIOCGKEY(sizeof kp->cur), kp->cur) < 0) {
        logmsg("EVIOCGKEY %s: %s", dev, strerror(errno));
        close(kp->fd); return -1;
    }
    memcpy(kp->prev, kp->cur, sizeof kp->cur);
    kp->ok = 1;
    logmsg("keypoll %s ready", dev);
    return 0;
}


/* 关闭 keypoll（设置页/下拉框等自开设备用；幂等，ok=0 时不动） */
void kp_close(struct keypoll *kp)
{
    if (kp->ok && kp->fd >= 0) close(kp->fd);
    kp->ok = 0;
}


/* Poll device key state; call cb(code, is_down) for each edge.
 * Returns 1 if any edge. */
int kp_poll(struct keypoll *kp, int (*cb)(int code, int down, void *ctx),
                   void *ctx)
{
    if (!kp->ok) return 0;
    if (ioctl(kp->fd, EVIOCGKEY(sizeof kp->cur), kp->cur) < 0) return 0;
    int changed = 0;
    for (int w = 0; w < KEYBUF_WORDS; w++) {
        if (kp->cur[w] == kp->prev[w]) continue;
        for (int b = 0; b < 32; b++) {
            int c = (kp->cur[w] >> b) & 1;
            int p = (kp->prev[w] >> b) & 1;
            if (c != p) {
                int code = w * 32 + b;
                changed = 1;
                if (cb) cb(code, c, ctx);
            }
        }
        kp->prev[w] = kp->cur[w];
    }
    return changed;
}


int kp_is_down(const struct keypoll *k, int code)
{
    return (k->cur[code / 32] >> (code % 32)) & 1;
}

int hotkey_mode = HOTKEY_MODE_PWRVOL;

int seq_codes[MAX_SEQ_LEN];

int seq_len = 0;

int seq_gap_ms = 600;


static int key_name_code(const char *n)
{
    if (!strcmp(n, "volup")) return KEY_VOLUMEUP;
    if (!strcmp(n, "voldown")) return KEY_VOLUMEDOWN;
    if (!strcmp(n, "play")) return KEY_PLAYPAUSE;
    if (!strcmp(n, "next")) return KEY_NEXT;
    if (!strcmp(n, "previous")) return KEY_PREVIOUSSONG;
    if (!strcmp(n, "power")) return KEY_POWER;
    return -1;
}


void load_config(void)
{
    menu_bg = 0x000000;
    hotkey_mode = HOTKEY_MODE_PWRVOL;   /* default: hold power + VOL_DOWN tap */
    seq_len = 0;
    seq_gap_ms = 600;
    char path[256];
    snprintf(path, sizeof path, "%s/meow.conf", MEOWAPPS);
    FILE *f = fopen(path, "r");
    if (f) {
        char buf[128];
        while (fgets(buf, sizeof buf, f)) {
            if (!strncmp(buf, "bg_color=", 9)) {
                unsigned int v;
                if (sscanf(buf + 9, "%x", &v) == 1) menu_bg = v & 0xFFFFFF;
            } else if (!strncmp(buf, "hotkey=", 7)) {
                char *p = buf + 7;
                while (*p == ' ' || *p == '\t') p++;
                if (!strncmp(p, "seq", 3)) hotkey_mode = HOTKEY_MODE_SEQ;
                else hotkey_mode = HOTKEY_MODE_PWRVOL;
            } else if (!strncmp(buf, "hotkey_seq=", 11)) {
                char *p = buf + 11;
                seq_len = 0;
                /* BUGFIX: the outer loop must consume the EOL — with
                 * *p staying at '\n' the empty-name branch never advanced p
                 * and the daemon spun forever (found on-device: a hotkey_seq
                 * line wedged load_config in a busy loop). */
                while (*p && *p != '\n' && *p != '\r' && seq_len < MAX_SEQ_LEN) {
                    char name[16];
                    int k = 0;
                    while (*p && *p != ',' && *p != '\n' && *p != '\r' && k < 15)
                        name[k++] = *p++;
                    name[k] = 0;
                    if (k >= 15)   /* malformed long name: skip to separator/EOL */
                        while (*p && *p != ',' && *p != '\n' && *p != '\r') p++;
                    if (*p == ',') p++;
                    int c = key_name_code(name);
                    if (c > 0) seq_codes[seq_len++] = c;
                }
            } else if (!strncmp(buf, "hotkey_seq_gap=", 15)) {
                int g = atoi(buf + 15);
                if (g >= 200 && g <= 2000) seq_gap_ms = g;
            }
        }
        fclose(f);
    }
    if (seq_len == 0) { seq_codes[0] = KEY_VOLUMEUP; seq_len = 3; }   /* seq fallback volup x3 */
    if (hotkey_mode == HOTKEY_MODE_PWRVOL)
        logmsg("config: bg_color=%06x hotkey=power_voldown (window %d-%dms)",
               menu_bg, HK_PWRWIN_MIN, HK_PWRWIN_MAX);
    else
        logmsg("config: bg_color=%06x hotkey=seq (%d taps of code %d gap=%dms)",
               menu_bg, seq_len, seq_codes[0], seq_gap_ms);
}