feat(bt): 蓝牙P1 — netmgrd BT_CTL权威收口(hcitool con判连接/paired-devices补名/a2dp详情/connect-disconnect-pair-unpair-scan)+launcher蓝牙子页sub_page_t重做(8分组,数据全走netmgrd)+设置键audio.output_bt/bt.codec;修act冲突+sub悬垂;宿主82PASS+bt_ctl/bt_page全过

patch_v2/meow_netmgrd/test_netmgrd.sh

@@ -75,8 +75,39 @@ echo "        UP RUNNING PSCAN"
 EOF
 cat > "$T/bluetoothctl" <<'EOF'
 #!/bin/sh
-echo "Device 00:1A:7D:DA:71:13 My Headset"
-echo "Device 11:22:33:44:55:66 Speaker"
+case "${1:-}" in
+  paired|paired-devices)
+    echo "Device 00:1A:7D:DA:71:13 My Headset"
+    echo "Device 11:22:33:44:55:66 Speaker";;
+  devices)
+    echo "Device 00:1A:7D:DA:71:13 My Headset"
+    echo "Device 11:22:33:44:55:66 Speaker"
+    echo "Device 33:DE:2E:21:AD:30 Pudding";;
+  connect|disconnect|pair|remove)
+    echo "Controller 00:1A:7D:DA:71:13 Connected: yes";;
+  *) echo "Device 00:1A:7D:DA:71:13 My Headset"; echo "Device 11:22:33:44:55:66 Speaker";;
+esac
+exit 0
+EOF
+cat > "$T/hcitool" <<'EOF'
+#!/bin/sh
+echo "	< ACL 33:DE:2E:21:AD:30 handle 12 state 1 lm MASTER"
+echo "	< ACL 11:22:33:44:55:66 handle 13 state 1 lm SLAVE"
+exit 0
+EOF
+cat > "$T/bluealsa-cli" <<'EOF'
+#!/bin/sh
+if [ "${1:-}" = "a2dp" ]; then
+echo "/org/bluealsa/hci0/dev_33_DE_2E_21_AD_30/a2dpsrc:"
+echo "	Type: A2DP Source"
+echo "	Codec: SBC"
+echo "	Sampling: 44100 Hz"
+echo "	Channels: 2"
+echo "	Bits per Sample: 16"
+echo "	State: RUNNING"
+echo "	Acquired: yes"
+fi
+exit 0
 EOF
 cat > "$T/ip" <<'EOF'
 #!/bin/sh
@@ -86,13 +117,14 @@ for a in "$@"; do
 done
 exit 0
 EOF
-for f in wpa_cli hciconfig bluetoothctl ip; do chmod +x "$T/$f"; done
+for f in wpa_cli hciconfig bluetoothctl hcitool bluealsa-cli ip; do chmod +x "$T/$f"; done
 
 mkdir -p "$T/logs" "$T/pid"
 # 期2：DNS 禁用（宿主无 root 不绑 53），观测层经 MEOW_TCP/UDP 打桩；amsd/svcd 缺省（实体归因走 proc:comm→unknown）。
 ENVS="MEOW_NET_DIR=$NET MEOW_NETDEV=$T/netdev MEOW_NET_ROUTE=$T/route MEOW_RESOLV=$T/resolv
       MEOW_RFKILL_DIR=$RF MEOW_BT_DIR=$BT MEOW_BOOT_MODE=$T/boot_mode MEOW_BOOTTS_CACHE=$T/bootts
       MEOW_IP=$T/ip MEOW_WPA_CLI=$T/wpa_cli MEOW_HCICONFIG=$T/hciconfig MEOW_BLUETOOTHCTL=$T/bluetoothctl
+      MEOW_HCITOOL=$T/hcitool MEOW_BLUEALSA_CLI=$T/bluealsa-cli MEOW_BT_SCAN_CACHE=$T/bt_scan.txt
       MEOW_NET_SOCK=$T/net.sock MEOW_NET_POLL_SEC=1 MEOW_LOG_DIR=$T/logs
       MEOW_TCP=$T/tcp MEOW_UDP=$T/udp MEOW_NET_POLICY=$T/policy
       MEOW_AMS_SOCK=$T/no_ams MEOW_SVCD_SOCK=$T/no_svcd MEOW_DNS_DISABLE=1"
@@ -137,10 +169,40 @@ ck T4a "permission denied" "$OUT"
 OUT=$(env $ENVS $Q "$T/meow_net" bt status 2>&1)
 ck T5a "available=1 powered=1" "$OUT"
 ck T5b "paired=2" "$OUT"
+ck T5b2 "connected=2" "$OUT"        # P1：内核 ACL 权威已连接数
 OUT=$(env $ENVS $Q "$T/meow_net" bt paired 2>&1)
 ck T5c "My Headset" "$OUT"
 ck T5d "Speaker" "$OUT"
 
+# ---- T5e: bt connected（P1：内核 ACL 权威，名经 devices 缓存兜底）----
+OUT=$(env $ENVS $Q "$T/meow_net" bt connected 2>&1)
+ck T5e "Device 33:DE:2E:21:AD:30 Pudding" "$OUT"
+ck T5e2 "Device 11:22:33:44:55:66 Speaker" "$OUT"
+
+# ---- T5f: bt a2dp（P1：bluealsa-cli a2dp list → codec/rate/acquired/role）----
+OUT=$(env $ENVS $Q "$T/meow_net" bt a2dp 2>&1)
+ck T5f "codec=SBC" "$OUT"
+ck T5f2 "rate=44100" "$OUT"
+ck T5f3 "acquired=1" "$OUT"
+ck T5f4 "role=src" "$OUT"
+
+# ---- T5g: bt devices（P1：netmgrd 权威扫描缓存）----
+cat > "$T/bt_scan.txt" <<'EOF'
+[NEW] Device 33:DE:2E:21:AD:30 Pudding
+[NEW] Device AA:BB:CC:DD:EE:FF Earbuds
+[DEL] Device 00:11:22:33:44:55
+EOF
+OUT=$(env $ENVS $Q "$T/meow_net" bt devices 2>&1)
+ck T5g "Device 33:DE:2E:21:AD:30 Pudding" "$OUT"
+ck T5g2 "Device AA:BB:CC:DD:EE:FF Earbuds" "$OUT"
+
+# ---- T5h: bt 写级（connect/pair 等）在宿主 CLI=CALL_OTHER → 拒（仅系统身份+MeowOS 放行，见 T6）----
+OUT=$(env $ENVS $Q "$T/meow_net" bt connect 33:DE:2E:21:AD:30 2>&1); RC=$?
+ck T5h "permission denied" "$OUT"
+ck T5h2 "rc=1" "rc=$RC"
+OUT=$(env $ENVS $Q "$T/meow_net" bt scan on 2>&1)
+ck T5i "permission denied" "$OUT"
+
 # ---- T6: HibyOS 只读降级（读可查，写拒）----
 echo hiby > "$T/boot_mode"
 sleep 2                                  # 等守护下一拍热切换