ClockLab/test/clock-model.test.js

'use strict';

// 纯逻辑自测（不需要 Electron、不需要显示器）：
//   node test/clock-model.test.js
// 走时模型是所有功能的地基，这里把它单独钉死，GUI 的问题就不会和算法问题混在一起。

const clockModel = require('../src/clock-model');

let passed = 0;
const failures = [];

function check(name, ok, detail) {
  if (ok) {
    passed += 1;
    console.log(`PASS  ${name}${detail ? `  [${detail}]` : ''}`);
  } else {
    failures.push(name);
    console.log(`FAIL  ${name}${detail ? `  [${detail}]` : ''}`);
  }
}

const T0 = 1_700_000_000_000; // 固定基准时刻，测试不依赖真实时钟
const SECOND = 1000;

console.log('--- 正常走时 ---');
{
  const c = clockModel.create(T0);
  check('初始倍率为 1', c.rate === 1);
  check('走 1 秒真实时间 = 1 秒显示时间', clockModel.displayMs(c, T0 + SECOND) === T0 + SECOND);
  check('走 1 小时真实时间 = 1 小时显示时间', clockModel.displayMs(c, T0 + 3600 * SECOND) === T0 + 3600 * SECOND);
}

{
  // 分 3600 次推进，验证「基准 + 经过时间 × 倍率」不会像逐帧累加那样漂移
  const c = clockModel.create(T0);
  let now = T0;
  for (let i = 0; i < 3600; i += 1) {
    now += SECOND;
    clockModel.displayMs(c, now);
  }
  check('一小时逐秒推进后零漂移', clockModel.displayMs(c, now) === T0 + 3600 * SECOND);
}

console.log('--- 倍率 ---');
{
  const c = clockModel.create(T0);
  clockModel.setRate(c, T0, 2);
  check('倍率 2：1 秒真实时间走 2 秒', clockModel.displayMs(c, T0 + SECOND) === T0 + 2 * SECOND);
}
{
  const c = clockModel.create(T0);
  clockModel.setRate(c, T0, 0.5);
  check('倍率 0.5：半速', clockModel.displayMs(c, T0 + SECOND) === T0 + 500);
}
{
  const c = clockModel.create(T0);
  clockModel.setRate(c, T0, -1);
  check('倍率 -1：走 1 秒真实时间倒退 1 秒', clockModel.displayMs(c, T0 + SECOND) === T0 - SECOND);
  check('倍率 -1：再走 5 秒仍在继续倒退（不是卡住）',
    clockModel.displayMs(c, T0 + 6 * SECOND) === T0 - 6 * SECOND);
}
{
  const c = clockModel.create(T0);
  clockModel.setRate(c, T0, -2.5);
  check('倍率 -2.5：小数 + 负数同时成立', clockModel.displayMs(c, T0 + 4 * SECOND) === T0 - 10 * SECOND);
}

console.log('--- 切换倍率不跳变 ---');
{
  const c = clockModel.create(T0);
  const before = clockModel.displayMs(c, T0 + 3000);
  clockModel.setRate(c, T0 + 3000, 7);
  const after = clockModel.displayMs(c, T0 + 3000);
  check('切倍率的瞬间显示时间连续（同一时刻前后相等）', before === after, `${before} → ${after}`);
  check('切换后按新倍率走', clockModel.displayMs(c, T0 + 4000) === before + 7 * SECOND);
}

console.log('--- 暂停 / 继续 ---');
{
  const c = clockModel.create(T0);
  clockModel.setRate(c, T0, 4);
  clockModel.setRate(c, T0 + SECOND, 0);
  const frozenAt = clockModel.displayMs(c, T0 + SECOND);
  check('倍率 0：显示时间冻结', clockModel.displayMs(c, T0 + 60 * SECOND) === frozenAt);
  check('暂停时记住了暂停前的倍率 4', c.lastRate === 4);

  clockModel.setRate(c, T0 + 60 * SECOND, c.lastRate);
  check('继续：从暂停处按原倍率接着走',
    clockModel.displayMs(c, T0 + 61 * SECOND) === frozenAt + 4 * SECOND);
}
{
  const c = clockModel.create(T0);
  clockModel.setRate(c, T0, 0);
  check('倍率一直是 0 时 lastRate 保持默认 1', c.lastRate === 1);
}

console.log('--- 快进 / 快退 ---');
{
  const c = clockModel.create(T0);
  const before = clockModel.displayMs(c, T0 + 2000);
  clockModel.shift(c, T0 + 2000, 5 * SECOND);
  check('+5 秒：显示时间立刻加 5 秒', clockModel.displayMs(c, T0 + 2000) === before + 5 * SECOND);
  check('快进后基准确实变了', c.baseMs === before + 5 * SECOND && c.baseRealMs === T0 + 2000);
  check('快进后继续按倍率走', clockModel.displayMs(c, T0 + 3000) === before + 6 * SECOND);
}
{
  const c = clockModel.create(T0);
  clockModel.setRate(c, T0, -1);
  const before = clockModel.displayMs(c, T0 + 10 * SECOND);
  clockModel.shift(c, T0 + 10 * SECOND, 30 * 60 * SECOND);
  check('负倍率下 +30 分钟：先固化显示时间再平移（不与倒转打架）',
    clockModel.displayMs(c, T0 + 10 * SECOND) === before + 30 * 60 * SECOND);
  check('平移后负倍率继续生效',
    clockModel.displayMs(c, T0 + 11 * SECOND) === before + 30 * 60 * SECOND - SECOND);
}
{
  const c = clockModel.create(T0);
  clockModel.setRate(c, T0, 0);
  const before = clockModel.displayMs(c, T0 + 1000);
  clockModel.shift(c, T0 + 1000, 10 * 60 * SECOND);
  check('暂停状态下快进仍然生效，且之后继续冻结',
    clockModel.displayMs(c, T0 + 60 * SECOND) === before + 10 * 60 * SECOND);
}
{
  // 五个快进按钮的档位
  const deltas = [5 * SECOND, 60 * SECOND, 5 * 60 * SECOND, 10 * 60 * SECOND, 30 * 60 * SECOND];
  const c = clockModel.create(T0);
  const before = clockModel.displayMs(c, T0);
  for (const d of deltas) clockModel.shift(c, T0, d);
  const total = deltas.reduce((a, b) => a + b, 0);
  check('五档快进累加正确（+5s/+1m/+5m/+10m/+30m）',
    clockModel.displayMs(c, T0) === before + total, `总计 ${total / 1000} 秒`);
}

console.log('--- 设定时间 ---');
{
  const c = clockModel.create(T0);
  clockModel.setRate(c, T0, 60);
  clockModel.setTimeOfDay(c, T0 + 5000, 8, 30, 15);
  const d = new Date(clockModel.displayMs(c, T0 + 5000));
  check('设定为 08:30:15 且毫秒归零',
    d.getHours() === 8 && d.getMinutes() === 30 && d.getSeconds() === 15 && d.getMilliseconds() === 0,
    `${d.getHours()}:${d.getMinutes()}:${d.getSeconds()}.${d.getMilliseconds()}`);
  check('设定后高倍率继续生效', clockModel.displayMs(c, T0 + 6000) === d.getTime() + 60 * SECOND);
}
{
  const c = clockModel.create(T0);
  clockModel.setTimeOfDay(c, T0, 0, 0, 0);
  const d = new Date(clockModel.displayMs(c, T0));
  check('设定为 00:00:00（边界）', d.getHours() === 0 && d.getMinutes() === 0 && d.getSeconds() === 0);
}
{
  const c = clockModel.create(T0);
  clockModel.setTimeOfDay(c, T0, 23, 59, 59);
  const d = new Date(clockModel.displayMs(c, T0 + 2000));
  check('23:59:59 后跨零点进位', d.getHours() === 0 && d.getMinutes() === 0 && d.getSeconds() === 1,
    `${d.getHours()}:${d.getMinutes()}:${d.getSeconds()}`);
}

console.log('');
if (failures.length === 0) {
  console.log(`全部通过：${passed}/${passed}`);
  process.exit(0);
} else {
  console.log(`通过 ${passed}，失败 ${failures.length}：${failures.join('；')}`);
  process.exit(1);
}